All the functional groups except ether are present.
Which functional group is not present in this molecule?functional group both carbon-carbon and carbon-hydrogen sigma bonds are single strong, nonpolar covalent bonds functional groups that are usually the least reactive bonds in organic molecules. Alkane order groups form the inert framework of most organic amalgams. For this reason, alkanes are not formally considered a functional group.
Functional groups are groups of atoms or bonds that define the purpose of the hydrocarbon that they get nuts about some of the important functional groups in biological molecules to involve: hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl groups
So we can conclude that Thus the ether functional group is away in the given structure.
Learn more about the functional groups here: https://brainly.com/question/10058230
#SPJ1
The following compounds, listed with their boiling points, are liquid at -10°C: butane, -0.5°C; etha- nol, 78.3°C; toluene, 110.6°C. At -10°C, which of these liquids would you expect to have the highest vapor pressure? Which the lowest? Explain.
The pressure of a vapor in a closed system that is in thermodynamic equilibrium with its condensed phases is known as vapor pressure.
Is toluene prohibited in the United States?Toluene is regarded as one of the "toxic trinity" of hazardous compounds, along with formaldehyde and dibutyl phthalate, that are present in polishes and give them their hard finish. The trio is prohibited in many other nations, but if it is stated on the ingredient list, it is OK in the United States.
Is toluene very toxic?Toluene is regarded instantly harmful to life and health at levels of 500 ppm. Some persons may be more sensitive than others to the effects of inhaled solvents as a result of genetic variations. Some employees exposed to toluene levels deemed safe at work have developed occupational asthma.
To know more about Toluene visit:
https://brainly.com/question/29899857
#SPJ4
if 123 ml of 0.300 m hno3 are added to 321 ml of 0.100 m koh, what is the final ph?
The final pH of the solution formed by mixing 123 ml of 0.300 M HNO3 (nitric acid) and 321 ml of 0.100 M KOH (potassium hydroxide) can be calculated using the concept of neutralization reactions.
In a neutralization reaction, an acid reacts with a base to form a salt and water. The reaction between nitric acid and potassium hydroxide can be written as follows:
The number of moles of HNO3 and KOH can be calculated as follows:
n_HNO3 = (0.123 L) * (0.300 mol/L) = 0.0369 mol
n_KOH = (0.321 L) * (0.100 mol/L) = 0.0321 mol
Since the reaction is a neutralization reaction, the number of moles of HNO3 and KOH should be equal. If the number of moles of HNO3 is greater than the number of moles of KOH, the solution will be acidic, and if the number of moles of KOH is greater than the number of moles of HNO3, the solution will be basic. In this case, the number of moles of HNO3 is greater than the number of moles of KOH, so the solution will be acidic.
The pH of the solution can be estimated using the Henderson-Hasselbalch equation:
pH = pKa + log([A^-]/[HA])
where pKa is the dissociation constant of the acid, [A^-] is the concentration of the conjugate base, and [HA] is the concentration of the acid. For nitric acid, the dissociation constant is about 7, so the pH of the solution can be estimated as follows:
pH = 7 + log([NO3^-]/[HNO3])
To find the exact pH, you would need to use a more sophisticated method, such as a chemical equilibrium simulation or a pH meter.
learn more about ph at:
brainly.com/question/491373
#SPJ4
how to find relative error of molar mass of oxygen gas
To find relative error of molar mass of oxygen gas Calculate the difference between the measured value and the true value, and divide it by the true value and then multiply it by 100%.
Relative error of molar mass of oxygen gas can be calculated as follows:
Determine the true value of the molar mass of oxygen gas, which is the accepted standard value.
Measure the molar mass of a sample of oxygen gas using a suitable instrument such as a mass spectrometer.
Calculate the difference between the measured value and the true value, and divide it by the true value.
Multiply the result by 100% to obtain the relative error as a percentage.
The relative error is an expression of the accuracy of the measurement relative to the true value. A smaller relative error indicates a more accurate measurement. The relative error of molar mass measurements can be affected by several factors, including the quality of the equipment used, the accuracy of the measurement procedure, and the purity of the sample being analyzed.
To know more about Molar mass click here:
https://brainly.com/question/12127540#
#SPJ11
How many moles are in 300 g of Sulfur?
Answer:
there are 300/32 moles in 300 g, i.e. 9.375 moles.
Why are endergonic and exergonic reactions typically coupled?A) Newton's laws of motion state that every action has an equal and opposite reaction. Therefore, in a chemical reaction, energy must both be released and absorbed.B) The free energy released from the exergonic reaction is used to drive the non-spontaneous endergonic reaction.C) An exergonic reaction will proceed too slowly without an endergonic reaction to stabilize the transition state.D) In order to maintain equilibrium, the heat lost in an exergonic reaction is absorbed by the endergonic reaction, to keep the free energy at 0.
`The endergonic and exergonic reactions typically coupled because the correct option is .B) The free energy released from the exergonic reaction is used to drive the non-spontaneous endergonic reaction.
The exergonic reaction is the reaction in which the free energy is released. The gibbs free energy is negative for the exergonic reaction. The exergonic reaction is released in this reaction.
The endergonic reaction is the reaction in which the free energy is absorbed. The gibbs free energy is positive for the endergonic reaction. The endergonic reaction absorbed the energy.
Thus, they are coupled as The free energy released from the exergonic reaction is used to drive the non-spontaneous endergonic reaction.
To learn more about endergonic reaction here
https://brainly.com/question/15210981
#SPJ4
which path is the critical path? pathactivityexpected activity timeactivity variance a-b-ca2.83.25 b4.00.44 c3.17.25 d-e-fd4.00.11 e5.00.44 f7.00.44 g-h-ig3.33.44 h6.00.44 i4.17.25
The critical path is the path with the longest expected duration. In the given example, the critical path is A-B-C-D-E-F-G-H-I, with an expected duration of 33.44.
This path has the highest duration and the highest variance, meaning that any delays along this path will have the greatest effect on the overall project duration.
The critical path is a key concept in project management, and it is important to understand how it works in order to properly manage a project. The critical path is defined as the longest sequence of activities that must be completed in order for a project to be finished on time.
Learn more about The critical path:
https://brainly.com/question/15131995
#SPJ4
The enzyme fumarase catalyzes the reaction:
fumarate + H2O → malate. The turnover number for this enzyme and substrate is 800 per minute. How long would it take one molecule of fumarase to produce 7850 product molecules? Ans: ____ min
It would take one molecule of fumarase approximately Turnover for 9.8125 minutes to produce 7850 product molecules.
To calculate the time it would take one molecule of fumarase to produce 7850 product molecules, we need to divide the total number of product molecules by the enzyme's turnover number. Fumarase is an enzyme that catalyzes the reaction of fumarate to L-malate in the citric acid cycle. This reaction is an important step in cellular respiration and energy production in living cells. Fumarase speeds up the reaction by lowering the activation energy required for the conversion to occur, allowing the reaction to occur more quickly and efficiently.
Turnover number = 800 per minute
Product molecules = 7850
Time = 7850 / 800 = 9.8125 minutes
Learn more about molecules here:
https://brainly.com/question/15379971
#SPJ4
a liquid has an enthalpy of vaporization of 30.8 kj/mol. at 273 k it has a vapor pressure of 102 mmhg. what is the normal boiling point of this liquid? (1mm hg
A liquid has an enthalpy of vaporization of 30.8 kj/mol. at 273 k it has a vapor pressure of 102 mmhg. The normal boiling point of this liquid is 320 K
In order to get the normal boiling point of the liquid, we will use the Clausius-Clapeyron equation expressed according to the equation:
ln [tex]\frac{P2}{P1}[/tex] = (ΔHvap/R) . ([tex]\frac{1}{T1}[/tex] - [tex]\frac{1}{T2}[/tex])
where:
P1 is the vapor pressure of that substance at T1
P2 is the vapor pressure of that substance at T2
ΔHvap is the enthalpy of vaporization.
R is the gas constant - usually expressed as 8.31 J/Kmol
Since we are looking for the normal boiling point, we can set P2 = 1 atm (101.3 kPa) and T2 = the normal boiling point temperature.
Rearranging the equation to solve for T2:
T2 = (ΔHvap/R) * [tex](1/T1 - 1/P2)^{-1}[/tex] + T1
Plugging in the values we have:
T2 = (30.8 kJ/mol) / (8.31 J/mol*K) * [tex](1/273 K - 1/101.3 kPa)^{-1}[/tex] + 273 K
Solving for T2, the normal boiling point temperature is approximately 320.2 K ≈ 320 K
Here you can learn more about the normal boiling point temperature
https://brainly.com/question/29163603
#SPJ4
The solid is Ca3(PO4)2
The amount of solid Ca3(PO4)2 that can be formed from 290 g of calcium nitrate and 129 g of phosphoric acid would be 183 grams.
Stoichiometric problemCalcium nitrate and phosphoric acid react to form calcium phosphate and hydrogen nitrate according to the following equation:
[tex]3Ca(NO_3)_2 + 2H_3PO_4 --- > Ca_3(PO_4)_2 + 6HNO_3[/tex]
Mole of 290 g calcium nitrate = 290/164.088 = 1.77 mol
Mole of 129 g phosphoric acid = 129/97.994 = 1.32 mol
In other words, calcium nitrate is limiting.
Equivalent mole of Ca3(PO4)2 that will be formed = 1.77/3 = 0.59 mol
Mass of 0.59 mole Ca3(PO4)2 = 0.59 x 310.18 = 183 grams
In other words, the mass of solid Ca3(PO4)2 that can be formed is 183 grams.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
The dissolving process occurs at the _________ of the solute.
Responses
A basebase
B surfacesurface
When silver nitrate and sodium sulfate react, a precipitate forms. What mass of the precipitate is obtained when 100. Ml of 0. 100 m sodium sulfate is added to 150. Ml of 0. 100 m silver nitrate? if 1. 50 g of the precipitate was isolated. What is the percent yield?.
The mass of the precipitate, Ag₂SO₄ obtained is 2.34 g
Determination of the mole of Na₂SO₄
Volume of Na₂SO₄ = 100 mL = 100 / 1000 = 0.1 L
Molarity of Na₂SO₄ = 0.1 M
Mole of Na₂SO₄ =?
Mole = Molarity x Volume
Mole of Na₂SO₄ = 0.1 × 0.1
Mole of Na₂SO₄ = 0.01 mole
Determination of the mole of AgNO₃
Volume of AgNO₃ = 150 mL = 150 / 1000 = 0.15 L
Molarity of AgNO₃ = 0.1 M
Mole of AgNO₃ =?
Mole = Molarity x Volume
Mole of AgNO₃ = 0.1 × 0.15
Mole of AgNO₃ = 0.015 mole
Determination of the limiting reactant
Na₂SO₄ + 2AgNO₃(aq) → Ag₂SO₄(s) + 2NaNO₃(aq)
From the balanced equation above,
1 mole of Na₂SO₄ reacted with 2 moles AgNO₃
Therefore,
0.01 mole of Na₂SO₄ will react with = 0.01 × 2 = 0.02 mole of AgNO₃
From the above calculation, we can see that a higher amount of AgNO₃ (i.e 0.02 mole) than what was given (i.e 0.015 mole) is needed to react completely with 0.01 mole of Na₂SO₄.
Therefore, AgNO₃ is the limiting reactant and Na₂SO₄ is the excess reactant.
Determination of the mole of the precipitate, Ag₂SO₄ obtained
Na₂SO₄ + 2AgNO₃(aq) → Ag₂SO₄(s) + 2NaNO₃(aq)
From the balanced equation above,
2 moles of AgNO₃ reacted to produce 1 mole of Ag₂SO₄.
Therefore,
0.015 mole of AgNO₃ will react to produce = 0.015 / 2 = 0.0075 mole of Ag₂SO₄
Determination of the mass of precipitate, Ag₂SO₄ obtained
Mole of Ag₂SO₄ = 0.0075 mole
Molar mass of Ag₂SO₄ = (2×108) + 32 + (16×4) = 312 g/mol
Mass of Ag₂SO₄ =?
Mass = mole × molar mass
Mass of Ag₂SO₄ = 0.0075 × 312
Mass of Ag₂SO₄ = 2.34 g
Learn more about stoichiometry:
brainly.com/question/26092247
#SPJ4
does temperature affet how high a ball bounces science project
The temperature of the ball is one element that might affect how it bounces. A ball will bounce higher than a cold one if it is warmer. This is due to two factors.
When the temperature of a hollow ball changes, the air pressure inside the ball also changes. The balls bounced higher when they were hot and lower when they were cold. The air temperature inside the ball and the rubber's elasticity were both impacted by the temperature shift, which also changed the height of the ball's bounce. The sum of a ball's material characteristics surface textures, constituent materials, air content, hardness or softness, etc. affects the height of its bounce.
To learn more about temperature click here https://brainly.com/question/29072206
#SPJ4
what is the concentration of a reactant after 22.0 s if the initial concentration is 0.150 m and the rate constant is 5.4 x 10⁻² s⁻¹?
The concentration of a reactant after [tex]\rm 22.0 s[/tex], given an initial concentration of 0.150 M and a rate constant of 5.4 x 10⁻² s⁻¹, is 0.0410 M.
Concentration of a solution is defined as the amount of solute present in a given amount of solvent or solution.
To find the concentration of a reactant after 22.0 s, we can use the following first-order rate law equation:
[tex]\rm ln\dfrac{([A]_t}{[A]_0)} = -kt[/tex]
Where,
[tex]\rm [A]_t[/tex] is the concentration of the reactant at time t,
[tex]\rm [A]_0[/tex] is the initial concentration of the reactant,
k is the rate constant, and t is the time elapsed.
Rearranging this equation, we get:
[tex]\rm [A]_t = [A]_0 \times e^{(-kt)}[/tex]
Plugging in the values, we get:
[tex]\rm [A]_t = 0.150\times e^{(-5.4 \times 10^{-2} \times 22.0)}[/tex]
= 0.0410 M
Therefore, 0.0410 M is the remaining concentration of the reactant after 22.0 s.
Learn more about concentration here:
https://brainly.com/question/30862855
#SPJ12
A gas with a volume of 650 mL and a pressure of 680 mm Hg is allowed to expand to a volume of 1200 mL. What is the new pressure of the gas in mm Hg?
Answer:
The new pressure will be
1000 L
Which two elements are present in the sample?
chlorine and mercury
chlorine and neon
helium and mercury
helium and neon
The sample contains helium and neon elements.
What do helium and neon mean?The two lightest noble gases, helium and neon, have traditionally been placed in Group 18 of the Periodic Table of Elements, alongside argon and other unreactive or moderately reactive gaseous elements (krypton, xenon, radon), and oganesson.
A helium-neon laser, also known as a He-Ne laser, is a type of gas laser whose high energetic medium gain medium is a mixture of helium and neon in a 10:1 ratio at a total pressure of about 1 torr inside a small electrical discharge.
Helium has only two electrons in its outer electron shell. Neon and Argon have 8 electron outer shells, and all three have filled outer shells.
To learn more about Helium and neon, visit
brainly.com/question/28208572
#SPJ1
find the area of the region enclosed by one loop of the curve. r = sin(12)
Where r is the radius of the cardioid and θ is the angle. Since the equation is in terms of the angle, it is not possible to calculate the area of the region enclosed by one loop of the curve.
What is the equation ?An equation is a mathematical statement that uses an equal sign to show that two expressions have the same value. An equation typically consists of two parts, separated by an equal sign. The two parts of the equation can be numbers, variables, or mathematical operations such as addition, subtraction, multiplication, and division. The equation can be used to solve unknown values, such as the value of a variable in a given expression. Equations are an important part of mathematics and are used to model real-world problems and to describe the relationships between different quantities.
To learn more about equation
https://brainly.com/question/28818351
#SPJ4
Perform the conversions between energy units.
814 kJ= J
2815 kcal= kJ
5.65×106 J= kcal
As 1 Kilojoules is equals to 1000 joules, then the conversion of energy units:
814 kJ= 814,000 J
2815 kcal= 11,844.35 kJ
5.65×106 J= 13,438.8 kcal
What is energy unit?Simply put, energy is the ability to perform work. It can appear in kinetic, potential, electrical, chemical, nuclear, thermal, and other forms. It is divided into two categories: renewable energy and non-renewable energy.
It's interesting that James Prescott Joule, a British physicist whose work helped establish the concept of energy, has his name preserved as the name of this international unit. In terms of SI base units, the unit can be represented as follows: When examining the unit in its simplest form, 1-N.m is equal to 1 joule:
1J = 1kg · (m/s)² = 1 kg·m²/s²
Learn more about energy unit
https://brainly.com/question/29538961
#SPJ4
assume that the extinction coefficient for dhfr is uncertain by /- 5 percent. what is the full range of concentrations is consistent with this uncertainty?
When the extinction coefficient for DHFR (dihydrofolate reductase) is uncertain by +/- 5%, it means that the actual value of the extinction coefficient could be 5% higher or 5% lower than the reported value.
To determine the full range of concentrations that are consistent with this uncertainty, we need to calculate the minimum and maximum values of the extinction coefficient based on the +/- 5% uncertainty.
For example, if the reported extinction coefficient is 10,000 M^-1 cm^-1, Minimum value would be 9,500 M^-1 cm^-1 (10,000 - 500)
Maximum value would be 10,500 M^-1 cm^-1 (10,000 + 500).
The full range of concentrations that are consistent with this uncertainty can then be calculated by using the minimum and maximum values of the extinction coefficient in the appropriate equation. For example, if we are using the extinction coefficient to calculate the concentration of DHFR in a sample, we would use the minimum and maximum values of the extinction coefficient in the calculation to determine the full range of concentrations that are consistent with the +/- 5% uncertainty.
To know more about coefficient click here:
https://brainly.com/question/30066987#
#SPJ11
The following are acid-base conjugate pairs except:
A. C6H5CO2H
and C6H5CO−2
B. H3O+ and OH−
C. CH3NH+3
and CH3NH2
D. HS− and S2−
C6H5CO2H and C6H5CO⁻² are acid-base conjugate pairs. Thus, option A is correct.
What is an example of a conjugate acid base pair?A conjugate acid-base pair is composed of two bases which only differ by the presence or absence of a proton. As a consequence, NH4+ is the conjugate acid of NH3, and NH3 is the conjugate base of NH4+. The conjugate base of F- is F, whereas the conjugate acid of F is HF.
What is the benzoic acid c6h5co2h's conjugate base?Benzoic acid contains the same unionised acid (C6H5COOH), conjugate base (C6H5COO-), and hydrogen ion elements as formic acid.
What is the conclusion of the Bronsted-Lowry theory?The base is a chemical which takes an H+ ion or a proton to produce its conjugate acid, and the acid is a molecule which contributes an H+ ion or a proton to form its conjugate base, according to the Bronsted-Lowry theory.
Learn more about acid-base conjugate here:
brainly.com/question/13336099
#SPJ4
What is the LD50 for sodium cyanide?
LD50, which stands for "Lethal Dose 50," is a measure of the toxic dose of a substance required to cause death in 50% of the test subjects. Sodium cyanide (NaCN) is a highly toxic chemical used in various industrial processes. It is important to understand the LD50 of sodium cyanide to ensure the safety of workers and the general public.
The LD50 of sodium cyanide varies based on the route of exposure and the species of test subject. According to the Merck Index, the oral LD50 for sodium cyanide in rats is around 50 mg/kg. This means that if a rat were to ingest 50 mg of sodium cyanide per kilogram of body weight, it would result in death for 50% of the rats. However, it is important to note that the LD50 for sodium cyanide can vary depending on the species of test subject, with the LD50 being higher for larger animals such as dogs and lower for smaller animals such as mice.
In addition to oral exposure, sodium cyanide can also be toxic through inhalation and skin contact. The inhalation LC50 (Lethal Concentration 50) of sodium cyanide in rats is approximately 20 mg/m3, meaning that if a rat were to inhale air containing 20 mg of sodium cyanide per cubic meter, it would result in death for 50% of the rats. The dermal LD50 of sodium cyanide in rabbits is approximately 200 mg/kg, meaning that if 200 mg of sodium cyanide were applied to the skin of a rabbit per kilogram of body weight, it would result in death for 50% of the rabbits.
In conclusion, sodium cyanide is a highly toxic chemical that can cause death through various routes of exposure. The LD50 of sodium cyanide varies based on the route of exposure and the species of test subject, with oral exposure being the most toxic in rats. It is important to understand the LD50 of sodium cyanide to ensure the safety of workers and the general public.
Here you can learn more about Lethal Dose 50
https://brainly.com/question/4529732#
#SPJ11
What is the ratio of a conjugate acid to a conjugate base if the ph of the solution is 5. 1 and the pka of the acid is 6. 5
10:1 , Because this conjugate base is a component of a salt of this acid and a strong base, the solution of acid X and its conjugate base is a buffer solution.
What is conjugate base formula?The formula of the conjugate base is the formula of the acid less one hydrogen. The reacting base becomes its conjugate acid. The formula of the conjugate acid is the formula of the base plus one hydrogen ion.
The Henderson-Hasselbalch equation, pH = pKa + log([A]/[HA]), can be used to calculate the pH of a buffer. The equilibrium concentrations of the conjugate acid-base pair utilised to form the buffer solution are denoted by [HA] and [A] in this equation.Because a base's conjugate acid ("B") is "BH," we can abbreviate "the pKa of the conjugate acid of a base" as its pKaH. As a result, the pKaH of pyridine is 5.2 while the pKaH of piperidine is 11.
To know more about conjugate base visit:
https://brainly.com/question/30225100
#SPJ4
find the average rate of change of the function over the given interval. f(t)=7 cost a. π 2,π b.
The average rate of change of the function f(t) = 7 cos(t) over the interval [π/2, π] is 0.
What is average rate of change of a function ?The average rate of change of a function over an interval is the total change in the function value divided by the length of the interval. In this case, the function f(t) = 7 cos(t) goes from a maximum value of 7 to a minimum value of -7 as t increases from π/2 to π, so the total change in the function value is -7 - 7 = -14. The length of the interval [π/2, π] is π - π/2 = π/2. So, the average rate of change over the interval is -14 / (π/2) = -14π/π = -14.
To know more about average rate, visit:
https://brainly.com/question/28739131
#SPJ4
LAB: SOIL PARTICLES
You have learned that soil is made of weathered rock, water, air, and organic material. The size of particles is an important soil characteristic. According to the United States Department of Agriculture (USDA), there are three main particle sizes—sand, silt, and clay. Clay is particles smaller than 0.002 mm. Sand is particles larger than 0.05 mm. Particles in between are silt. The size of particles in soil determines how much water the soil will hold. Small particles hold more water than large particles.
Soil usually settles into different layers called horizons. The arrangement of horizons is the soil profile. In this experiment, you will observe how particle size affects the soil profile.
Describe how particle size affects the settling of soil.
Which type of soil do you think will settle to the bottom of the container faster?
1 1/2 cups potting soil
1 1/2 cup sand
3 wide-mouthed juice bottles with lids
Masking tape
Pen
Water
Make masking tape labels for each juice bottle. Label one "soil" and the other "soil and sand."
Fill both bottles 3/4 full of water.
Slowly pour 1 cup of soil into the water in the "soil" bottle. Observe the behavior of the soil particles.
Fill the "soil" bottle the rest of the way with water. Secure the lid tightly and shake the bottle. Put the bottle on a flat surface where nothing will disturb it.
Slowly pour 1 cup of sand into the water in the "sand" bottle. Observe the behavior of the soil particles.
Fill the "sand" bottle the rest of the way with water. Secure the lid tightly and shake the bottle. Put the bottle on a flat surface where nothing will disturb it.
Add the 1/2 cup of sand to the remaining 1/2 cup of soil. Mix thoroughly with the spoon.
Slowly pour the sand and soil mixture into the water in the "soil and sand" bottle. Observe the behavior of the particles.
Fill the "soil and sand" bottle the rest of the way with water. Secure the lid tightly and shake the bottle. Put the bottle on a flat surface where nothing will disturb it.
Leave both bottles undisturbed for 8 hours.
Look at the bottles again after 8 hours and record your observations.
Data
What did you notice about the way the soil particles sank in the water? How was it different from the way the soil and sand particles sank?
What does the soil look like in the "soil" bottle? How is it different from the soil in the "soil and sand" bottle?
In the "soil and sand" bottle, which type of soil is on the bottom? Why?
The amount of each size particle in soil is the particle size distribution. Do you think this is a good way to determine particle size distribution? Why or why not?
State whether your hypothesis was supported or disproved, and then explain why it was supported or disproved using your data. Summarize your observations and answer one or more of the following questions: How does this lab relate to what I have been learning? How does this experiment relate to things I have seen in my own life? What could be done to improve this experiment?
Heading and title
Hypothesis, procedure, data, post lab, and conclusion section headings
Each section is thorough and complete
Lab report typed into a word processor (such as Microsoft Word) and saved
Typed lab document uploaded to Ignitia and submitted
1. I noticed that the soil particles settled out of the water with the larger, heavier particles settling out first and on the bottom, and each layer has smaller and lighter particles in it.
2. Sand settled on the bottom because they are heavier and have more mass than the smaller particles such as silt and clay.
3. Yes, this is a good way to determine particle size distribution. The method used in the experiment allows for the separation of soil particles based on their size and weight, which is a good indicator of their distribution in the soil sample.
4. The results in this experiment may look different when done in different locations because the particle size distribution of soil can vary depending on the location, climate, and geology of the area. Soils in different locations may have different compositions, including different amounts of sand, silt, and clay, which can affect the results of the experiment. Additionally, the sedimentation rate of the particles can also be influenced by factors such as the temperature, the presence of organic matter, and the presence of clay minerals, which can further affect the results.
Which equilibrium is most important in determining the pH of a solution of sodium phosphate?a. HPO42- + H2O = PO43- + H3O+b. H2PO42- + H2O = H3PO4 + OH-c. H3PO4 + H2O = H2PO4- + H3O+d. PO43- + H2O = HPO42- + OH-
C. H2O + H3PO4 = H2PO4- + H3O+
The second equilibrium, H2PO42- + H2O = H3PO4 + OH-, is the one that matters the most for figuring out the pH of a sodium phosphate solution.
It is the amount of hydrogen ions (H+) in a solution that determines its pH. Reaction C, H3PO4 + H2O = H2PO4- + H3O+, is the equilibrium reaction in a sodium phosphate solution that has the biggest impact on the concentration of H+ ions. In this reaction, phosphoric acid (H3PO4) is broken down into its conjugate base, H2PO4-, and the hydronium ion, H3O+.
The ratio of H3PO4 to H3O+ in the solution, which is impacted by pH, determines the amount to which this reaction takes place. The concentration of H+ ions and H2PO4- increases as the concentration of H3PO4 in the solution increases because more of it will dissociate into H3O+ and H2PO4-.
Learn more about hydrogen here:
https://brainly.com/question/28937951
#SPJ4
How many milliliters of sterile water should be added to 125 ml of sucrose so the resultant solution is a 4% solution?.
Answer:
Explanation:
:
4. A physician asks the pharmacy to prepare 0.5 L of a 1:5000 epinephrine solution. The available solution is 1:1000. How many milliliters of sterile water should be added to 125 mL of sucrose so the resultant solution is a 4% solution?
A:
a. 21.5 mL b. 50 mL c. 3125 mL d. 31.25 mL
Mohammad observed that his water boiled much more quickly than his isopropyl alcohol. His peer group suggested some experimental error that may caused this to happen. Which 2 experimental errors most likely caused the invalid data a. He could have mixed up the labels on the containers b. The heating vessel or hot plate was not at the same temperature c. His procedure was correct but tested a type of water that boils more quickly than isopropyl alcohol d. The boiling vessel might have been dirty so the solutions got mixed
Answer:
Mohammad observed that his water boiled much more quickly than his isopropyl alcohol. His peer group suggested some experimental error that may caused this to happen. Which 2 experimental errors most likely caused the invalid data a. He could have mixed up the labels on the containers b. The heating vessel or hot plate was not at the same temperature c. His procedure was correct but tested a type of water that boils more quickly than isopropyl alcohol d. The boiling vessel might have been dirty so the solutions got mixed
Explanation:
nitrogen has 7 protons, 7 neutrons, and 7 electrons. what is the atomic number of nitrogen?
Answer:
14
Explanation:
the addition of the number of protons and neutrons gives the answer
Seven protons make up the nucleus of nitrogen, which has an atomic number of 7. Since it has a mass number of 14, and we know that it has seven protons.
What is nitrogen's atomic number, which is seven?Furthermore, given that nitrogen has an atomic number of 7, we can infer that it contains seven protons. As a result, the Na atom's atomic number, which is 11, is the same as the sum of its protons and electrons.
How is the atomic number determined?The number of protons in an atom's nucleus or the number of electrons in an electrically charged atom is its atomic number unbiased atom An atom of sodium, for instance, has 11 protons and 11 electrons.
To know more about atomic number visit:-
https://brainly.com/question/16858932
#SPJ4
Why the formula of sodium chloride is NaCl?
The sole two components of sodium chloride are sodium (Na) and salt, which is chlorine's positively charged ionic form (Cl). Its chemical name is NaCl for this reason.
What makes sodium chloride known as NaCl?
Most people use the term "salt" to refer to sodium chloride, or table salt. Ionic bonds between sodium ions & chloride ions result in the formation of sodium chloride. The formula is NaCl because there is one saline cation (Na+) per each chloride anion (Cl-) (Fig. 1).
Does NaCl accurately reflect the sodium chloride chemical formula? If not, why not?
Because of this, sodium chloride isn't a molecule. The empirical formula for the -1:1 ratio of the various elements is available. There is a chloride particle for every sodium ion. So (Na+Cl)n is the empirical formula of sodium chloride.
To know more sodium about:
https://brainly.com/question/29327783
SPJ4
how many moles of water will be produced when 38 moles of sulfuric acid is consumed
Answer:
Explanation:
The conversion of sulphur to sulfuric acid, though it goes through several steps, is:
2 S + 3 O2 + 2 H2O → 2 H2SO4
OK, so the equation says for every 2 moles of S you will get two moles of sulfuric acid. With a little simple math, then, the ratio of S to H2SO4 is 2:2 which is the same as 1:1.
While not correct by convention, you can write the above equation as
S + 3/2 O2 + H2O → H2SO4
And then the relationship between S and H2SO4 is more clear.
HELPPP You connect two strips of iron using wire, and stand them
in an electrolyte. Will a current flow?
A wire acts like a magnet when there is an electric current flowing through it. An electromagnet is a coil of insulated wire that carries current and is wound around a piece of iron. Additionally, magnetic material is separated from trash using electromagnets.
What strips of iron using wire cause current flow?The current runs through the coil, which transforms into an electromagnet, when the iron strip comes into contact with the screw.
The iron strip is then pulled by it. In the procedure, a sound is created when the bell's gong is struck by the hammer at the end of the strip.
Therefore, A magnetic field is mostly reliant on current and less so on gauge, and some heating, more or less, depends on the gauge of the wire and the quantity of current.
Learn more about current flow here:
https://brainly.com/question/2264542
#SPJ4