Which entry by the user will cause the program to halt with an error statement?

# Get a guess from the user and update the number of guesses.
guess = input("Guess an integer from 1 to 10: ")
guess = int(guess)

3

Answer:

The next field in an Ethernet frame after the Start Frame Delimiter (SFD) is the Destination MAC address. This field is 6 bytes long (48 bits) and tells who the frame is meant for. The Source MAC address field comes after the Destination MAC address field. It is also 6 bytes long and shows who sent the frame. After the Source MAC address field, the frame has the Ethernet Type field. This field shows what kind of protocol is in the Ethernet frame's payload. The Payload field comes after the Ethernet Type field. The Payload can be between 46 and 1500 bytes long. The data that is being sent, like an IP packet or another message from a higher-layer protocol, is in the Payload. The last part of an Ethernet frame is the Frame Check Sequence (FCS), which is a 4-byte (32-bit) field that has a checksum for the whole Ethernet frame to make sure it didn't get messed up while being sent.

To find the volume of a sphere of radius r centered at the origin, we use the method of slicing perpendicular to the -axis.

Consider a sphere of radius r that is centered at the origin. We can slice this sphere into an infinite number of thin circular disks perpendicular to the -axis. Each of these disks is a circle with radius √(r^2 - x^2), where x is the distance of the disk from the origin along the -axis. The volume of each of these circular disks can be approximated by the volume of a cylinder with radius √(r^2 - x^2) and height dx.

Therefore, the volume of each disk isπ(√(r^2 - x^2))^2 dx = π(r^2 - x^2) dx.  This volume of the slice perpendicular to the -axis can be represented by the equationπ(r^2 - x^2) dx. To find the volume of the sphere, we need to integrate the volume of each slice from x = -r to x = r. The integral representing the volume of the sphere can be expressed as follows: V = ∫(-r)r π(r^2 - x^2) dxV = π ∫(-r)r (r^2 - x^2) dxV = π [r^2x - (1/3)x^3] evaluated from x = -r to x = rV = π [r^3 - (1/3)r^3 - (-r^3 + (1/3)r^3)]V = π [2/3 r^3]V = (4/3) π r^3

Therefore, the volume of a sphere of radius r centered at the origin is (4/3) π r^3.

Learn more about finding the volume of a sphere of radius at: brainly.com/question/9232206

#SPJ11

The link-local scope all-routers multicast address is ff02::2. Therefore, a) none of the given options are correct.

A multicast address is an IP address that is used to identify a group of devices in a multicast group. Multicast addresses allow a sender to transmit a single copy of data to many receivers simultaneously. The All-routers multicast address is used to identify all routers on a given network.

Learn more about Link-Local visit:

https://brainly.com/question/30899873

#SPJ11

The type of confidentiality concern that describes when an attacker taps into a wired network to intercept unencrypted wireless transmissions is eavesdropping.

Eavesdropping is defined as a type of interception of electronic communications that occurs outside of the designated receiver's immediate presence, with or without their permission. For the purposes of the interception, eavesdropping can be used to refer to any form of secret monitoring or spying. Confidentiality is a concept in information security and cybersecurity that describes how sensitive data and information must be protected from unauthorized access or disclosure. The term refers to a practice of safeguarding against the unauthorized release of sensitive data or information by restricting access to such data.

To ensure that confidentiality is maintained, a number of techniques are used, including encryption, access control, and authentication, among others.

Learn more about eavesdropping: https://brainly.com/question/14311587

#SPJ11

In a linked list implementation using a reference first to point to the first node of the list, a method isEmpty() can test to see if the list is empty by executing the statement(s) `return first == null`.

A linked list is a linear data structure consisting of nodes connected through pointers or references. In computer science, a linked list is a collection of elements. Each element in a linked list is known as a node. Every node is made up of a data item and a pointer to the next node.

The first node of the linked list is referred to as the head. The final node of the linked list is referred to as the tail. The head node is the node that can be accessed first. It contains a pointer to the next node in the list. If the head node is null, the list is empty.

The linked list implementation using a reference first to point to the first node of the list, a method isEmpty() can test to see if the list is empty by executing the statement(s) `return first == null`. It is a basic check if the head node is null or not.

Learn more about  a linked list:https://brainly.com/question/14527984

#SPJ11

The given statement "Data loss prevention (DLP) uses business rules to classify sensitive information to prevent unauthorized end users from sharing it." is true because Data loss prevention (DLP) uses business rules to classify sensitive information and prevent unauthorized end users from sharing it.

DLP is a set of technologies and practices designed to protect sensitive data from being leaked, lost, or stolen. It involves the use of policies and rules to classify and monitor sensitive data, and prevent it from being accessed, transmitted, or stored in unauthorized ways.

DLP solutions use a combination of techniques, such as content analysis, context awareness, and behavioral analytics, to detect and prevent data breaches. They can also include features like encryption, access controls, and monitoring and auditing tools to help organizations protect their sensitive data.

You can learn more about data loss prevention at

https://brainly.com/question/15177750

#SPJ11

There are different ways of defining production rules for the same language. You can verify whether the context-free grammars are correct by testing the strings generated by them.

In order to provide context-free grammars that generate given languages, we will use the basic structure of a context-free grammar which is as follows:

a. {w | w contains at least three 1s}

S → 0S1 | 1S0 | 0S0 | 1S1 | 1A | A1 | A0 | 0A

A → 1A1 | 1A0 | 0A1 | ε

b. {w | w starts and ends with the same symbol}

S → 0S0 | 1S1 | 0 | 1

c. {w | the length of w is odd}

S → 0A0 | 1A1

A → 0S | 1S | 0 | 1

Ad. {w | the length of w is odd and its middle symbol is a 0}

S → 0A0 | 1A0

A → 0S | 1S | 0 | 1

e. {w | w = wR, that is, w is a palindrome}

S → 0S0 | 1S1 | 0 | 1 | ε

f. The empty set

S → ε

Learn more about context-free visit:

https://brainly.com/question/29762238

#SPJ11

It is important to delegate different IT responsibilities to separate individuals to ensure proper network maintenance and wireless access. The correct answer is D: "network maintenance and wireless access."

This responsibility should be delegated to separate individuals because network maintenance requires technical expertise and knowledge of network architecture, while wireless access involves configuring and maintaining wireless network infrastructure. By delegating these responsibilities to separate individuals, the IT department can ensure that each area is managed by a specialist with the necessary skills and knowledge.

The other options listed do not require as distinct and specialized skill sets, and can be performed by the same individual or team without causing conflicts of interest or inefficiencies.

Therefore, the correct answer option is D.

You can learn more about  information technology (IT)  at

https://brainly.com/question/12947584

#SPJ11

VoIP (Voice over Internet Protocol) is used for checking voicemails over the internet, IM (Instant Messaging) is used for chatting with sales team, IRC is used to connect to the internet and download email messages, SMTP (Simple Mail Transfer Protocol) is used for sending emails and POP (Post Office Protocol) is used for searching online for casual conversation.

What are protocols?
Protocols are a set of rules and procedures that govern the communication between two or more devices or systems over a network. In computer networking, protocols define how data is transmitted, received, and processed between devices, and ensure that data is delivered reliably and securely.

There are many different protocols used in computer networking, each with its own specific purpose and function. For example, the Transmission Control Protocol (TCP) is a protocol used for reliable data transmission over the internet, while the Internet Protocol (IP) is used for routing and addressing data packets. Other protocols include HTTP (Hypertext Transfer Protocol) used for web browsing, SMTP (Simple Mail Transfer Protocol) used for email communication, and FTP (File Transfer Protocol) used for transferring files between devices.


Here are the protocols or Internet-based services being used in each scenario:

VoIP - Elijah uses his laptop to check his work voicemails.

IM - Lise chats with her sales team about a new customer outreach initiative.

IRC - Michele connects to the Internet at the airport for a few minutes to download any new email messages from work.

SMTP - Rex sends an email to his boss updating her on the current status of a complaint from a customer.

POP - Tim searches online for casual conversation about his new hobby flying drones.

To know more about internet visit:
https://brainly.com/question/21565588
#SPJ1

Where a temperature sensor can generate 16-bit readouts between -30oc and 300° C, the dynamic range of the sensor is: 330°C

Dynamic range is the ratio between the minimum and maximum possible values of a physical quantity, such as sound or light. It refers to the range of values that a sensor or system is capable of measuring or detecting.

Thus, the dynamic range of the sensor is the difference between the maximum and minimum values it can measure.

In this case, the minimum value is -30°C and the maximum value is 300°C.

Therefore, the dynamic range of the sensor is:

300°C - (-30°C)

= 330°C

Learn more about dynamic range;
https://brainly.com/question/30481254
#SPJ1

C++ Code:

c

// Author: Your Name

// Date: March 15, 2023

// Purpose: To print "Hello, World!" in C++

#include <iostream>

int main() {

   std::cout << "Hello, World!" << std::endl;

   return 0;

}

Java Code:

typescript

Copy code

// Author: Your Name

// Date: March 15, 2023

// Purpose: To print "Hello, World!" in Java

public class HelloWorld {

   public static void main(String[] args) {

       System.out.println("Hello, World!");

   }

Benefits and drawbacks of using C++ and Visual Studio in a coding project:

Benefits:

Drawbacks:

C++ can be more difficult to learn and write compared to other programming languages due to its complexity.

Manual memory management can lead to memory leaks and other errors.

C++ code can be less portable between different platforms.

Benefits and drawbacks of using Java and Eclipse or Python and PyCharm in a coding project:

Java:

Benefits:

Drawbacks:

Python:

Benefits:

Drawbacks:

Advantages of being able to code in multiple coding languages and compilers:

Read more about Python here:

https://brainly.com/question/26497128

#SPJ1

Got it "Maureen added a trend line to a graph showing sales trends for the past 10 years. To extend the trend line to forecast sales for the next two years, enter 2 in the Backward box on the panel. Trend Line Format" is true. Therefore, the correct choice is A. TRUE.

To extend the trend line to forecast sales for the next two years, we need to follow the steps below:

First, you need to add a trend line to the chart by clicking on the chart and selecting the Chart Design tab on the ribbon. Next, we need to choose the Add Chart Element button, which is located at the top of the chart. After that, we need to select the Trendline checkbox from the dropdown menu.

Next, we need to format the trend line by clicking on the chart and selecting the Format Trend Line panel. Then, in the dashboard, we need to enter 2 in the Backward box to extend the trend line to forecast sales for the next two years.

Finally, we need to close the Format Trendline panel by clicking the X button in the upper right corner of the panel. So the sustainability is true that Maureen added a trend line to a graph showing sales trends for the last 10 years. To extend the trend line to forecast sales for the next two years, enter 2 in the Backward box on the Format Trend Line panel.

See more information on extending the trend line at: https://brainly.com/question/2589459

#SPJ11

If more data than expected is inputted to overwrite program code, it can cause the program to behave unexpectedly or crash.

This is because the extra data overwrites important instructions or data structures used by the program. In some cases, the program may continue to execute, but with errors or unintended behavior.

In severe cases, the program may become corrupted and unusable, requiring it to be reinstalled or repaired. Therefore, it's important to ensure that input data is properly validated and sanitized to prevent such errors from occurring.

Read more about program codes here:

https://brainly.com/question/26134656

#SPJ1

it would take 8 microseconds to transmit the data frame using Manchester encoding with a clock frequency of 1000 GHz.

Manchester encoding is a line code that encodes binary data as transitions between high and low levels. It uses a clock signal that is twice the frequency of the data signal, which means that for each bit of data, two symbols are transmitted.

For a data frame with a total length of 1 MB (or 8 million bits) where all bits are set to 1s, the number of symbols that need to be transmitted would be 2 times that, or 16 million symbols.

Since the clock frequency is 1000 GHz, or 1 trillion cycles per second, the time it takes to transmit one symbol would be:

1 / (2 * 1000 GHz) = 0.5 picoseconds

Therefore, the time it takes to transmit all 16 million symbols would be:

16 million symbols * 0.5 picoseconds/symbol = 8 microseconds

So utilising Manchester encoding and a clock frequency of 1000 GHz, the transmission of the data frame would take 8 microseconds.

You can learn more about manchester coding at

https://brainly.com/question/14987522

#SPJ11

Answer:

Roadman.

Explanation:

In contemporary UK slang, a "roadman" refers to a young male who lives in or frequents urban areas, often associated with gang activity, drug dealing, and street culture. The term originated in the context of British urban youth subcultures, particularly in London, and has evolved to encompass a range of behaviors, fashion styles, and attitudes. Some people may also use the term "roadman" to refer to someone who is perceived as cool, tough, or rebellious. However, it is important to note that the term can also be associated with negative and criminal behavior, and should not be glorified or encouraged.

Thank me later.

The type of data that a column can contain depends on its data type. This enables the table's creator to contribute to the preservation of the data's integrity.

Records (rows) and fields make up a table (columns). Data can be entered in fields in a variety of formats, including text, numbers, dates, and hyperlinks. a document contains specific information, such as details about a certain employee or product.

Records are the name for database entries. A database record is really a grouping of data that has been arranged into a table. This table may represent a certain subject or class. A tuple is another name for a record.

To know more about data type visit:-

brainly.com/question/14581918

#SPJ1

1. Compare the two lists element by element: This procedure involves comparing the elements in list1 to the elements in list2 one by one. When a match is found, the programmer adds one to a counter.

A program is a set of instructions or code that tells a computer how to perform a particular task. It is composed of commands, functions, and other instructions that allow the computer to complete tasks and solve problems. A program can run on a variety of devices, including computers, phones, tablets, and game consoles. Programs are written in a variety of programming languages, such as C++, Java, Python, and HTML.

Once all elements have been compared, this will give the programmer the number of different values that appear in both lists.
2. Create a set of the two lists: This procedure involves creating a set of both list1 and list2. A set is a collection of unique elements, which means that the values in the set will only appear once. By comparing the set of list1 and the set of list2, the programmer will be able to determine the number of different values that appear in both lists.
3. Use a loop to iterate through the lists: This procedure involves using a loop to iterate through the elements in list1 and list2 and comparing each element. If a match is found, the programmer adds one to a counter. Once the loop has finished iterating through the lists, the programmer will have the number of different values that appear in both lists.

To learn more about program
https://brainly.com/question/30657432
#SPJ1

The statement that extranet is a private network, such as a school or company network, in which the devices and servers are available only to users connected to the internal network is true.

An extranet refers to a private network that is made available to external users via the internet. It is used by businesses to communicate and collaborate with their partners, customers, and suppliers. This network enables organizations to securely share data, files, and other important resources with their partners and suppliers.  The extranet is a virtual private network (VPN) that allows authorized users to access a company's data and network resources. This network is usually used to give customers, partners, suppliers, and vendors access to a limited set of resources that are relevant to them. So, an extranet is a private network, such as a school or company network, in which the devices and servers are available only to users connected to the internal network.

Learn more about extranet visit:

https://brainly.com/question/3052368

#SPJ11

Production designers are an essential part of film and television production, responsible for the visual design of the project. However, their role can vary greatly between small and large budget productions.

On a small budget production, the production designer may be required to wear multiple hats, such as also serving as the art director or set decorator. They may need to work with limited resources and tight schedules, requiring them to be creative and resourceful in their designs. For example, in the low-budget film "Moonlight" (2016), production designer Hannah Beachler had a modest budget to work with and had to rely on practical locations, such as abandoned buildings and public housing projects, to create the film's setting.

On a large budget production, the production designer has more resources and personnel to work with, allowing them to create more elaborate and detailed sets and environments. They may also work closely with a team of art directors, set decorators, and visual effects artists to bring their vision to life. For example, in the big-budget film "Avatar" (2009), production designer Rick Carter and his team spent years developing the film's alien world of Pandora, using a combination of practical and digital effects to create the immersive environment.

In both cases, the production designer is responsible for creating a visual world that supports the story and enhances the audience's experience. However, the differences in budget and resources can greatly impact the scope and complexity of their designs

Find out more about Production designers

brainly.com/question/26015791

#SPJ4

In this implementation, we start by making a list of the supplies we keep in the pantry. The function check shopping list that accepts an ingredient list and compares it to the pantry items is then defined.

Choose a pantry zone, such as the freezer, before conducting an inventory. Then take everything out of the zone and spread it out on your kitchen counter or table. Write down the food items and the quantity of each on paper or on your phone.

# pre-made list of pantry essentials

Items in the pantry include ["eggs," "milk," "bread," "butter," "cheese," "yoghurt," "chicken," "beef," "pasta," "rice," "potatoes," and "onions."

Define the function check shopping list(ingredients) to compare ingredients to pantry items.

grocery list = []

for the substance listed:

If an item isn't in the pantry items, add it to the shopping list (item)

if len(shopping list) >= 0, then

You don't need to go shopping, print

else:

For item in shopping list, print ("You need to go shopping for the following items:")

print(item)

a user-submitted ingredient list

component list = []

ingredient = input("Enter an ingredient (or 'done' to finish):") while True

If an ingredient equals "done"

ingredient list break. append (ingredient)

# Call the check shopping list function with the ingredient list in the argument.

To know more about function visit:-

https://brainly.com/question/28939774

#SPJ1

The most distinguishing feature of the use of a client-server processing model over an old mainframe configuration is the distribution of computing power.

A client-server processing model is a distributed application structure that partitions tasks or workload between service providers and service requesters, called clients. Each computer in the client-server model operates as either a client or a server. The server provides services to the clients, such as data sharing, data manipulation, and data storage.

The client requests services from the server, allowing for the distribution of processing responsibilities between the two entities. In this model, the server is responsible for storing data, while the client is responsible for data retrieval. A mainframe configuration is an older computing model that is centralized, where the mainframe performs all computing activities.

All users are linked to the mainframe, which stores all data and applications, as well as handles all processing responsibilities. Mainframes can handle a large amount of data and have a lot of processing power, but they are inflexible and can be difficult to scale. The distribution of computing power is the most distinguishing feature of the use of a client-server processing model over an old mainframe configuration.

In the client-server model, processing power is distributed between the client and the server. In a mainframe configuration, however, all computing power is centralized, with the mainframe handling all processing responsibilities.

Learn more about client-server processing model here:

https://brainly.com/question/31060720

#SPJ11

The name of the testing for which the hacker is being paid is Penetration Testing.

Penetration Testing (Pen Testing) is the process of evaluating the security of an IT infrastructure by simulating an attack on the network, application, or system. Pen Testing is also known as ethical hacking, and it is a method of identifying vulnerabilities and testing the effectiveness of security measures before they are exploited by attackers. Pen Testing is a legal way to test a computer system or network's security.

Penetration testing simulates the same type of attack as that used by hackers to identify vulnerabilities and potential points of attack. By simulating an attack, penetration testing identifies areas of the system or network that may need additional protection or improvements.Penetration testing can be performed by security professionals or by external service providers. The service provider can work with an organization to determine the scope of the testing, set up a testing environment, and simulate different types of attacks. The service provider can also offer advice on how to improve security measures and provide a report on the results of the testing.The aim of penetration testing is to help organizations identify vulnerabilities in their computer systems or networks and implement security controls to protect against attacks. Penetration testing is an essential tool for maintaining the security of computer systems and networks.

Read more about the computer :

https://brainly.com/question/24540334

#SPJ11

Answer:

(a) Run the program with test data to verify the results and trace the source of the problem.

(b) Verify that variable names are spelled correctly.

(c) Search for language that does not follow the programming language conventions.

Explanation:

(a), (b), and (c) are all appropriate responses to an error alert. It is important to investigate the error and determine its source to fix the issue and prevent it from happening again.

Proper data redundancy design requires carefully defined and controlled data redundancies to function properly.

Data Redundancy- Data redundancy refers to data that is duplicated and exists in multiple places within a database. Although this might appear to be a good idea at first, it can cause data inconsistencies, increase storage requirements, and decrease database efficiency over time because modifications must be made to multiple copies of the same data.

Carefully defined and controlled data redundancies are required for proper data redundancy design to function properly. This involves preventing duplication of data entries and preserving data integrity by carefully controlling the data redundancy that is allowed in a database. Data redundancy can be reduced by enforcing data normalization, which ensures that data is only entered once into a database and can be referenced in other areas of the database where it is needed. As a result, properly designed data redundancy can improve database performance, data accuracy, and reliability.

Therefore, redundancy is the correct answer.

To learn more about "data", visit: https://brainly.com/question/31140146

#SPJ11

The state in which the GPO is in the group policy objects folder but hasn't been linked to any container objects is called unlinked.

What is GPO?A GPO (Group Policy Object) is a virtual framework within the Active Directory hierarchy that governs the functionality of user accounts and computers on a network. A GPO is a set of policy settings that can be linked to a domain, organizational unit, site, or other container-like items (such as groups or computers) to help define the operational environment of computers and the users linked to them.

Policies: Group policies are collections of settings that specify how computers, user accounts, and groups operate on a network. These settings assist in maintaining a consistent user environment, preventing unauthorized access, and assisting in the efficient management of networks. Using Group Policy, an IT administrator can handle the operations of a large number of computers and users by setting the configurations once, saving time and energy by not having to make the same modifications on each computer individually.

Object: Objects are the building blocks of Active Directory, and they include users, groups, organizational units, printers, computers, and other resources. Each object in Active Directory has a distinctive set of attributes, some of which are common across all objects, such as a name, a description, and a path.

Learn more about GPO here: https://brainly.com/question/31066652

#SPJ11

Following are the practices that can be used to improve privacy when transacting Bitcoin: A: make sure to use the same address multiple times; B: use coinjoin where multiple parties jointly create a transaction with several inputs and outputs; C: use a mixing service; D: use off-chain transactions such as lightning network.

You can learn more about Bitcoin at

https://brainly.com/question/9170439

#SPJ11

If the legacy server has a USB-A or USB-B port, then those connectors should be compatible with the USB 3.2 hard drive that supports 10 Gbps speeds. Optops B and D are correct.

USB-A and USB-B are the older and larger connector types, commonly used for computer peripherals and printers, respectively. USB 3.2 is backwards compatible with these connector types, which means that a USB 3.2 hard drive that supports 10 Gbps speeds should work with a legacy server that has a USB-A or USB-B port. It's important to note that the transfer speeds will be limited by the maximum speed supported by the USB port on the legacy server.

USB Micro and USB-C are newer and smaller connector types that are not commonly found on legacy servers. USB Micro is typically used for mobile devices, while USB-C is becoming more common on newer computers and mobile devices. If the legacy server does not have a USB-A or USB-B port, then an appropriate adapter may be needed to connect the USB 3.2 hard drive.

Therefore, the supported connectors for the USB 3.2 hard drive in this scenario are USB-A and USB-B. If the legacy server has either of these ports, the administrator can connect the hard drive to the server to back up the contents. If the legacy server has a different type of USB port, an adapter may be necessary to connect the hard drive.

You can learn more about USB 3.2 at

https://brainly.com/question/19583493

#SPJ11

To protect against SQL injection attacks, the developer should use parameterized queries or prepared statements in their code.

Parameterized queries are a secure coding technique that involve separating the SQL query logic from the user input. This is done by using placeholders in the SQL statement where the user input should be inserted, and then providing the user input as a separate parameter to the query execution function.

Prepared statements are similar to parameterized queries, but they are pre-compiled on the server side and can be reused multiple times with different user input. This technique helps to prevent SQL injection attacks by separating the SQL query logic from the user input and ensuring that any user input is treated as data rather than executable code.

Both of these techniques help to ensure that user input is treated as data rather than executable code, which makes it much more difficult for attackers to inject malicious SQL code into the application. It's important to note that while these techniques can help to prevent SQL injection attacks, they should be used in combination with other secure coding practices, such as input validation and output encoding, to provide a comprehensive defense against attacks.

You can learn more about SQL injection attacks at

https://brainly.com/question/15685996

#SPJ11

Enterprise architecture includes the plans for how a firm will build, deploy, use, and share its data, processes, and MIS assets.

Enterprise architecture (EA) is a framework that organizations use to handle their information technology (IT) operations. EA provides a comprehensive view of the organization's technology infrastructure, guiding decision-makers in making the right choices about software, hardware, and technology usage in general.

The strategy component outlines the organization's technology goals and objectives. The architecture component describes how technology will be used to achieve those goals. The implementation component involves putting the plan into practice, developing systems and processes to support the plan, and monitoring results for continued success.

Enterprise architecture (EA) is a discipline that allows an organization to manage change more effectively. Enterprise Architecture (EA) is concerned with creating a comprehensive view of an organization, including its information systems architecture, technical architecture, and business processes.

This provides an organization with a holistic view of its resources, so that it can make better decisions about its technology investments.

For such more question on Enterprise:

https://brainly.com/question/29645753

#SPJ11

Answer:feedback

Explanation:

The statement "Due to the importance of effective performance management systems, many companies and organizations are training managers on how to provide feedback to employees" is True.

What is performance management?

Performance management is an ongoing process of communication between an employee and their manager that happens all year round. It includes setting goals, regular check-ins, and end-of-year performance reviews. The following are some of the benefits of effective performance management:

Based on the advantages of efficient performance management, several companies are investing in training their managers on how to give feedback to their employees. This ensures that performance management is successful, effective, and valuable to the business.

Learn more about  performance management systems:https://brainly.com/question/14506325

#SPJ11

Your question is incomplete but probably the complete question is :

True or false: Due to the importance of effective performance management systems, many companies and organizations are training managers on how to provide feedback to employees.