Some consumers, like lions, do not eat plants or any other producers. They only eat other animals.

How do lions obtain the carbon they need?

by eating animals that have carbon-based molecules stored in their bodies
by breathing it in from the atmosphere in the form of carbon dioxide
by absorbing carbon-based molecules through their skin from the soil
by drinking water that contains carbon dioxide

Answers

Answer 1

Lions obtain carbon they need by eating the animals that have carbon-based molecules stored in their bodies.

How do lions obtain the carbon they need?

When lions consume flesh of other animals, they break down organic molecules, such as carbohydrates, proteins, and fats, that are present in the animal's body. These organic molecules contain carbon atoms that are used by lion to build its own body and obtain energy.

Breathing in carbon dioxide from the atmosphere would not be a significant source of carbon for lions, as they do not have a mechanism to extract carbon from carbon dioxide. Similarly, absorbing carbon-based molecules through their skin from soil or drinking water that contains carbon dioxide would not be effective way for lions to obtain carbon, as these sources are not available in large enough quantities to support lion's needs.

To know more about food chain, refer

https://brainly.com/question/16504883

#SPJ1

Answer 2

Answer:

It is A.

Explanation:

by eating animals that have carbon-based molecules stored in their bodies.

hope this helps good day


Related Questions

a ball is thrown upward in the air, and its height above the ground after seconds is feet. find the time when the ball will be traveling downward at feet per second.

Answers

The time required for the ball to travel downward at the feet per second will be 32 feet per second will be 1.5 seconds.

What is the time required by ball?

The ball is thrown upward in the air, and its height above the ground after seconds is feet. To find the time when the ball will be traveling downward at feet per second. In order to find the time when the ball will be traveling downward at feet per second, it is required to find the velocity of the ball when it reaches the maximum height.

In order to find the velocity, we need to differentiate the given function of height with respect to time. Now let's differentiate the given function of height with respect to time. Differentiating the function of height with respect to time, we get:

h(t) = -16t² + 48t + 64 = -16(t - 3)² + 160

Differentiating h(t) with respect to time, we get:

h(t) = -32t + 48

We know that the ball is thrown upward, so the initial velocity is 48 feet per second, and the acceleration is -32 feet per second per second. The ball is at maximum height when the velocity becomes 0.

So,

0 = -32t + 48

32t = 48

t = 1.5 seconds

Hence, the time when the ball will be traveling downward at 32 feet per second is 1.5 seconds.

Learn more about Acceleration here:

https://brainly.com/question/12550364

#SPJ11

Use the radius-luminosity-temperature relation to calculate the radius of a red supergiant with temperature 3000 K and total luminosity 60000 times that of the Sun. (Sec. 17.3 in the textbook)Express your answer using two significant figures.R= ___________ AU

Answers

A red supergiant with a temperature of 3000 K and a total luminosity of 60000 times that of the Sun, using the radius-luminosity-temperature relationship the radius is 700 AU (to two significant figures).

The radius-luminosity-temperature relation can be used to calculate the radius of a red supergiant. Given a temperature of 3000 K and a total luminosity of 60000 times that of the Sun, the radius can be calculated as follows:

R = (L/Lsun)[tex]^{\frac{1}{2} }[/tex]* (Teff/Teff,sun)⁻²

where R is the radius of the star, L is the luminosity, Teff is the effective temperature, and Lsun and Teff, sun are the luminosity and effective temperature of the Sun, respectively.

Substituting the given values, we get:

R = (60000)[tex]^{\frac{1}{2} }[/tex] * (3000/5777)⁻²

R = 4657.88 AU

Therefore, the radius of the red supergiant is approximately 4700 AU (two significant figures).

Learn more about radius-luminosity-temperature at https://brainly.com/question/14291232

#SPJ11

calculate the work done by gravity on the watermelon during its displacement from the roof to the ground

Answers

The work done by gravity on the watermelon during its displacement from the roof to the ground is 196 J.

The work done by gravity on the watermelon during its displacement from the roof to the ground can be calculated using the formula W = mgh, where W is the work done, m is the mass of the watermelon, g is the acceleration due to gravity and h is the height of the displacement.What is Work Done?Work done can be defined as the energy transferred when a force is applied to an object to move it over a certain distance. It is a scalar quantity and is measured in joules (J). The mass of the watermelon is not given in the question, so let us assume that the mass of the watermelon is 2 kg. The acceleration due to gravity, g is 9.8 m/s2, and the height of the displacement is not given in the question, so let us assume that the height of the displacement is 10 meters. Therefore, the work done by gravity on the watermelon during its displacement from the roof to the ground can be calculated as follows: W = mgh= (2 kg) (9.8 m/s2) (10 m)= 196J

Therefore, the work done by gravity on the watermelon during its displacement from the roof to the ground is 196 J.

Learn more about  work done  at brainly.com/question/13662169

#SPJ4

two technicians are discussing the parallel circuit laws. technician a says the total resistance of a parallel circuit is always less than that of the lowest resistance leg. technician b says the voltage is the same for each leg of a parallel circuit. who is correct?

Answers

Technician B is correct, i.e., the voltage is the same for each leg of a parallel circuit. This is because the voltage in a parallel circuit is the same across all components, but the current through each component varies.
The voltage, however, is the same for each leg of a parallel circuit. This is because the voltage in a parallel circuit is equal to the voltage across the entire circuit, regardless of the number of branches in the circuit.
According to the question statement, two technicians are discussing the parallel circuit laws. Technician A says the total resistance of a parallel circuit is always less than that of the lowest resistance leg. Technician B says the voltage is the same for each leg of a parallel circuit. We need to find out who is correct.

Parallel Circuit: A parallel circuit is an electrical circuit that consists of two or more components connected across the same two points. Each of the components has the same voltage across them, but they do not have the same current passing through them. The current is split among each component, and the total current entering the circuit equals the total current leaving the circuit. Hence, Ohm's law is valid for each component in parallel. Two rules should be followed in a parallel circuit:1. The voltage across each component in a parallel circuit is the same, but the current through each component varies.2. The reciprocal of the total resistance in a parallel circuit is equal to the sum of the reciprocals of each resistance in the circuit. So, the statement by Technician B is correct, i.e., the voltage is the same for each leg of a parallel circuit. This is because the voltage in a parallel circuit is the same across all components, but the current through each component varies. The statement by Technician A is not correct. The total resistance of a parallel circuit is less than the resistance of the smallest resistance leg. In a parallel circuit, the total resistance of the circuit is always less than the smallest resistor in the circuit. It is due to the inverse relationship between resistance and current: when resistance decreases, current increases. And since current divides in a parallel circuit, the total resistance is always less than any single resistance value. Therefore, technician A is incorrect.

For more information follow the link: https://brainly.com/question/27206933

#SPJ11

which researcher discovered the principles of classical conditioning?

Answers

The principles of classical conditioning were first discovered by Ivan Pavlov, a Russian physiologist, in the late 19th century.

Pavlov was conducting research on digestion in dogs when he observed that the dogs began to salivate at the sound of a bell that was regularly associated with the presentation of food.

This led him to develop the concept of conditioned reflexes, where a neutral stimulus (like the sound of the bell) could become associated with a meaningful stimulus (like the presentation of food) and elicit a response. Pavlov's research on classical conditioning laid the foundation for the study of learning and behavior, and his work has had a profound impact on psychology and other fields of study.

To learn more about reflexes refer to:

brainly.com/question/29727145

#SPJ4

The angular speed of a rotating platform changes from

ω

0

=

2. 8


r

a

d

/

s

to

ω

=

8. 8


r

a

d

/

s

at a constant rate as the platform moves through an angle

Δ

θ

=

5. 5


r

a

d

i

a

n

s
. The platform has a radius of R = 28 cm.


(a) Calculate the angular acceleration of the platform.


(b) Calculate the tangential acceleration of a point on the surface of the platform at the outer edge.


(c) Calculate the final centripetal acceleration of a point at the outer edge of the platform

Answers

(a) The angular acceleration of the platform can be calculated using the formula:

α = (ω - ω0) / Δθ

where α is the angular acceleration, ω0 is the initial angular speed, ω is the final angular speed, and Δθ is the change in angle.

Substituting the given values, we get:

α = (8.8 rad/s - 2.8 rad/s) / 5.5 rad

α = 1.45 rad/s^2

Hence, the angular acceleration of the platform is 1.45 rad/s^2.

(b) The tangential acceleration of a point on the surface of the platform at the outer edge can be calculated using the formula:

at = R * α

where it is the tangential acceleration and R is the radius of the platform.

Substituting the given values, we get:

at = (0.28 m) * (1.45 rad/s^2)

at = 0.406 m/s^2

Hence, the tangential acceleration of a point on the surface of the platform at the outer edge is 0.406 m/s^2.

(c) The final centripetal acceleration of a point at the outer edge of the platform can be calculated using the formula:

ac = R * ω^2

where ac is the centripetal acceleration and ω is the final angular speed.

Substituting the given values, we get:

ac = (0.28 m) * (8.8 rad/s) ^2

ac = 67.686 m/s^2

Hence, the final centripetal acceleration of a point at the outer edge of the platform is 67.686 m/s^2.

To know more about angular speed:

https://brainly.com/question/28439806

#SPJ4

Find the value of x. Round the length to the nearest tenth.

Answers

Answer:

well first u divide the numbers

Calculate the translational speed of a cylinder when it reaches the foot of an incline 7.20 m high. Assume it starts from rest and rolls without slipping.
Express your answer using three significant figures and include the appropriate units. Thank you!!

Answers

The translational speed of the cylinder when it reaches the foot of the incline is approximately 9.43 m/s.

We can use conservation of energy to solve this problem. The initial energy of the cylinder is all potential energy, and the final energy is all kinetic energy. The potential energy at the bottom of the incline is zero.

The potential energy of the cylinder at the top of the incline is given by:

PE = mgh

where m is the mass of the cylinder, g is the acceleration due to gravity, and h is the height of the incline. Substituting the given values, we get:

PE = (mass of cylinder) x (acceleration due to gravity) x (height of incline) = mgh

The kinetic energy of the cylinder at the bottom of the incline is given by:

KE = (1/2)mv^2

where v is the translational speed of the cylinder at the bottom of the incline.

According to the conservation of energy, the initial potential energy is equal to the final kinetic energy, so we can set these two expressions equal to each other:

mgh = (1/2)mv^2

We can cancel the mass of the cylinder from both sides, and solve for v:

v = sqrt(2gh)

Substituting the given values, we get:

v = sqrt(2 x 9.81 m/s^2 x 7.20 m) ≈ 9.43 m/s

Therefore, the translational speed of the cylinder when it reaches the foot of the incline is approximately 9.43 m/s.

For more such questions on Cylinder

https://brainly.com/question/23935577

#SPJ11

now consider the case of impending tipping. where do the normal force and friction force act in this case? a. at the midpoint of the bottom edge of the block. b. at the point directly below the center of gravity of the block. c. at the edge of the block closest to the top of the ramp. d. at the edge of the block closest to the bottom of the ramp. e. at an unknown point along the bottom edge of the block.

Answers

The normal force and friction force act at the point directly below the center of gravity of the block in the case of impending tipping.

Impending tipping occurs when the force of gravity acting on an object is unbalanced, causing it to start to tip over or become unstable.

When a solid object is about to tip over, the net torque about its center of gravity should be zero, or else it will fall.

In the case of impending tipping, the normal force and friction force act at the point directly below the center of gravity of the block.

When an object is about to tip over, the normal force (or the weight) acting on the center of mass should be equal to the maximum possible friction force at the base of the object.

Normally, a force is applied to the object that exceeds this friction force, causing the object to tip over.

When an object is about to tip over, the normal force (or the weight) acting on the center of mass should be equal to the maximum possible friction force at the base of the object.

To know more about normal force: https://brainly.com/question/28788588

#SPJ11

Consult Multiple-Concept Example 10 in preparation for this problem. Traveling at a speed of 16.1 m/s, the driver of an automobile suddenly locks the wheels by slamming on the brakes. The coefficient of kinetic friction between the tires and the road is 0.720. What is the speed of the automobile after 1.30s have elapsed? Ignore the effects of air resistance.

Answers

The speed of the automobile after 1.30 seconds have elapsed is 15.164 m/s.

Given the following data,

we will have to calculate the velocity of the car after 1.30 seconds:

Initial velocity, u = 16.1 m/s

Final velocity, v =?

Time elapsed, t = 1.30s

Coefficient of kinetic friction, μk = 0.720

We will apply the law of motion, i.e., v = u - μkt

Where, v is the final velocity of the car after 1.30 seconds,

u is the initial velocity of the car,

μk is the coefficient of kinetic friction,

t is the time elapsed after 1.30 seconds

Given values,

u = 16.1 m/sμk = 0.720t = 1.30s

Substituting the given values in the equation,

we get v = 16.1 m/s - (0.720 x 1.30s)

v = 16.1 m/s - 0.936v = 15.164 m/s

Therefore, the speed of the automobile after 1.30 seconds have elapsed is 15.164 m/s.

To know more about Speed: https://brainly.com/question/5248528

#SPJ11

While analyzing smoke detector designs that rely on the photoelectric effect, you are evaluating surfaces made from each of the materials listed in (Figure 1). One particular application uses ultraviolet light with wavelength 273 nm

Answers

Photodetectors that rely on the external photoelectric effect are known as photoemissive detectors (sometimes spelled photoelectric detectors).

A photocathode of some kind is present in such a device, where incident light is partially absorbed to produce photoelectrons, which are released into free space.

The light reflected off of particles by a light beam inside the sensor chamber is used by smoke detectors to detect smoke. When there are no particles in the sensing chamber, the beam's light does not hit the light detector, signaling that everything is in order.

Ionization smoke alarms detect smoke from rapidly blazing fires, while photoelectric smoke detectors are best for detecting smoke from smoldering fires.

To know about detector

https://brainly.com/question/28592245

#SPJ4

A__ is a measure of the electric power an appliance uses

Answers

An appliance's use of electricity is measured in watt (W). It displays the rate at which an electrical device uses energy while it is in operation. The power needed to generate one joule of energy per second is equal to one watt.

WattAn electrical device uses energy from the electrical power source that powers it when it is in use. Watts (W), a unit of power, is used to assess the rate of energy consumption. The pace at which one joule of energy is used up per second is equal to one watt.A 60-watt light bulb, for instance, means that when it is turned on, it uses energy at a rate of 60 joules per second. Similarly to this, when a fan with a 100-watt rating is switched on, it uses 100 joules of energy each second.An appliance's wattage can be found on its label or in its user manual.

learn more about watt here

https://brainly.com/question/1446143

#SPJ1

how many types of classifications are there for a lunar eclipse?

Answers

There are three types of lunar eclipses: total, partial, and penumbral.

During a total lunar eclipse, the moon is completely shadowed by the Earth, resulting in a reddish-brown color. In a partial lunar eclipse, only a portion of the moon is shadowed, while in a penumbral lunar eclipse, the moon passes through the Earth's outer shadow, resulting in a subtle darkening of the moon's surface. These classifications are based on the degree to which the moon passes through the Earth's shadow during the eclipse.

To know more about lunar eclipse, here

brainly.com/question/29775053

#SPJ4

action potentials do not stay in one place, they are _____ throughout the entire sarcolemma like ripples in a pond.a. repolarization
b. endemic
c. point-source
d. propagated

Answers

d. propagated. Action potentials spread over the whole sarcolemma like pond ripples, never remaining in one spot. This indicates that an action potential spreads or propagates down.

the length of the membrane after being originated at a single location in the membrane. The electrical charge of the membrane fluctuates in response to the flow of ions, causing a sequence of depolarizations and repolarizations that serve as the basis for this propagation. The transmission of nerve impulses and the contraction of muscles depend on the propagation of action potentials, This indicates that an action potential spreads or propagates down. which also enables quick and efficient communication inside the body.

learn more about propagated here

https://brainly.com/question/20725306

#SPJ4

A circular coil lies flat on a horizontal table. A bar magnet is held above its centre with its north pole pointing down, and released. As it approaches the coil, the falling magnet induces (when viewed from above) ...no current in the coil.a clockwise current in the coil.a counter clockwise current in the coil.a current whose direction cannot be determined from the information provided

Answers

As the released bar magnet approaches the coil, the falling magnet induces a counter clockwise current in the coil.The direction of the induced current in the coil is counter-clockwise.

A magnetic field exists when there is a change in magnetic flux. The change in magnetic flux is due to the relative motion between the bar magnet and the coil. The bar magnet produces a magnetic field as it falls towards the coil. The change in magnetic flux is proportional to the rate of change of the magnetic field.

Faraday's law of electromagnetic induction states that when a magnetic field that varies with time is passed through a coil, an electromotive force (EMF) is induced in it. When the magnet is dropped through the coil, the magnetic field through the coil varies, inducing an EMF in it. The EMF causes an induced current to flow through the coil. The direction of the induced current is counter-clockwise.

More on electromagnets: https://brainly.com/question/14856796

#SPJ11

a car is traveling with a velocity of 17.0 m/s on a straight horizontal highway. the wheels of the car have a radius of 48.0 cm. if the car then speeds up with an acceleration of 2.10 m/s for 5.10 s, find the number of revolutions of the wheels make during this period

Answers

The wheels make approximately 47.65 revolutions during the 5.10 s period.

What is Linear Speed?

Linear speed, also known as tangential speed, is the distance traveled by an object in a circular path per unit of time, measured in units such as meters per second (m/s) or kilometers per hour (km/h). It is the magnitude of the velocity vector of an object moving in a circular path at a constant speed, and is perpendicular to the centripetal acceleration vector.

The linear speed of the wheels is equal to the velocity of the car:

v = 17.0 m/s

The circumference of the wheels is:

C = 2πr = 2π(0.48 m) = 3.01 m

The angular speed of the wheels is related to the linear speed by:

ω = v/r

Therefore, the initial angular speed of the wheels is:

ω₀ = v/r = 17.0 m/s / 0.48 m = 35.42 rad/s

The final angular speed of the wheels after accelerating for 5.10 s at a constant rate of 2.10 m/s² is given by:

ω = ω₀ + αt

where α is the angular acceleration of the wheels. Since the wheels are assumed to roll without slipping, the linear acceleration of the car is equal to the angular acceleration of the wheels:

α = a/r = 2.10 m/s² / 0.48 m = 4.38 rad/s²

Substituting the given values into the equation for angular speed, we have:

ω = 35.42 rad/s + (4.38 rad/s²)(5.10 s) = 58.64 rad/s

The number of revolutions made by the wheels during this period is equal to the change in the angle of rotation of the wheels:

Δθ = ωt

Substituting the given values, we have:

Δθ = (58.64 rad/s)(5.10 s) = 299.58 rad

The number of revolutions is equal to the angle of rotation divided by 2π:

n = Δθ / 2π = 299.58 rad / 2π ≈ 47.65 revolutions

Learn more about Linear Speed from given link

https://brainly.com/question/29345009

#SPJ1

A 2100 kg truck has put its front bumper against the rear bumper of a 2400 kg SUV to give it a push. With the engine at full power and good tires on good pavement, the maximum forward force on the truck is 18,000 N. At this acceleration, what is the force of the SUV's bumper on the truck's bumper?

Answers

The force of the SUV's bumper on the truck's bumper would be 18,000 N.

The bumper on the truck is pushing the bumper of the SUV, which is acting as a reaction force back on the truck's bumper. According to Newton's Third Law, if the truck applies a forward force to the SUV, the SUV will apply an equal and opposite force back on the truck. Therefore, at this acceleration the force of the SUV's bumper on the truck's bumper would be the same as the forward force applied by the truck, which is 18,000 N.This is because the two vehicles are in contact with each other, so the force applied by one is equal and opposite to the force applied by the other.

Learn more about force and acceleration at : https://brainly.com/question/19414080

#SPJ11

which of the following capacitors, each of which has plates of area a, would store the most charge on the top plate for a given potential difference v ? A. 2 vacuum with d
B. 2 plates with glass with d
C. 2 vacuum with d/2
D. 2 plates with air d/2
E. 2 plates with glass d/2

Answers

In this case, the plates of the d/2 have an area a and a separation of d, d/2, or 2d. The correct option D have separation of d/2 is the one that can store the maximum charge on its top plate.

Capacitance is the capability of an object to store an electrical charge. Capacitance is calculated as the ratio of the charge stored to the potential difference between the plates of the capacitor.Capacitance = Charge/ Potential differenceThe equation shows that the charge that can be stored on a capacitor plate increases when the capacitance of the capacitor is high.The capacitance of a capacitor is proportional to the plate area and inversely proportional to the separation between the plates. It implies that if the plate area of a capacitor increases, the capacitance increases and if the separation between the plates decreases, the capacitance increases.Considering the above information, option D has plates with air of separation d/2. Since the air between the plates has a lower dielectric constant, the capacitance of the capacitor decreases. So, the charge stored on the capacitor will increase as the capacitance decreases. Therefore, the capacitor with the separation of d/2 can store the maximum charge on the top plate for a given potential difference v. Hence, the correct answer is option D.

Learn more about capacitors: https://brainly.com/question/13578522

#SPJ11

A car travelling at 22.4 m/s skids to a stop in 2.55s. Determine the skidding distance of the car (assume uniform acceleration).

Answers

Answer:

Approximately [tex]28.6\; {\rm m}[/tex].

Explanation:

Let [tex]u[/tex] denote the initial velocity of the vehicle, and let [tex]v[/tex] denote the velocity of the vehicle after skidding. It is given that the initial velocity was [tex]u = 22.4\; {\rm m\cdot s^{-1}}[/tex]. Since the vehicle skidded to a stop, [tex]v = 0\; {\rm m\cdot s^{-1}}[/tex].

Let [tex]t[/tex] denote the duration of the skid. It is given that [tex]t = 2.55\; {\rm s}[/tex].

Under the assumption that acceleration is constant, SUVAT equations will apply.

Specifically, the SUVAT equation [tex]x &= (1/2)\, (u + v)\, t[/tex] will be satisfied. In this equation, the displacement of the vehicle is equal to average velocity times duration. This equation allows the displacement [tex]x[/tex] to be found from [tex]u[/tex], [tex]v[/tex], and [tex]t[/tex] without knowing the exact value of acceleration:

[tex]\begin{aligned}x &= \left(\frac{u + v}{2}\right)\, t \\ &= \left(\frac{22.4 + 0}{2}\; {\rm m\cdot s^{-1}}\right)\; (2.55\; {\rm s}) \\ &\approx 28.6\; {\rm m}\end{aligned}[/tex].

you are designing a spacecraft to a giant planet. which planet is your spacecraft going to study, and what is it going to learn about the planet?

Answers

A spacecraft is a vehicle that can travel into space. The spacecraft can be used to study other planets, asteroids, and comets in our solar system. Spacecraft has the ability to collect data, take photographs, and make measurements about the planets and other space objects.

What can you learn about a planet?

With a spacecraft, scientists can learn a lot about planets. Some of the things that can be learned include the following:

The chemical composition of the planet's surface and atmosphere.The geology of the planet, such as mountains, valleys, and other features.How the planet rotates, and how long it takes to complete one rotation.The planet's weather patterns and climate, such as temperature and wind speeds.The planet's magnetic field, and how it interacts with the solar wind.The planet's moons and rings, and how they interact with the planet.

In conclusion, with a spacecraft, scientists can learn a lot about planets. Information about a planet can vary depending on the planet.

Learn more about spacecraft: https://brainly.com/question/24571549

#SPJ11

which compound in each set is aromatic? part a cyclopropene is a ring with three vertices and a double bond between the first and the second (clockwise) vertices. a cyclopropenyl cation is a ring with three vertices, a double bond between the first and the second (clockwise) vertices, and a positive charge at the third vertex. a cyclopropenyl anion is a ring with three vertices and a double bond between the first and the second (clockwise) vertices. there is a negative charge and a lone pair at the third vertex. cyclopropene is a ring with three vertices and a double bond between the first and the second (clockwise) vertices. a cyclopropenyl cation is a ring with three vertices, a double bond between the first and the second (clockwise) vertices, and a positive charge at the third vertex. a cyclopropenyl anion is a ring with three vertices and a double bond between the first and the second (clockwise) vertices. there is a negative charge and a lone pair at the third vertex. cyclopropene cyclopropenyl cation cyclopropenyl anion

Answers

Cyclopropene is a ring with three vertices and a double bond between the first and the second (clockwise) vertices.

A cyclopropenyl cation is a ring with three vertices, a double bond between the first and the second (clockwise) vertices, and a positive charge at the third vertex. A cyclopropenyl anion is a ring with three vertices and a double bond between the first and the second (clockwise) vertices. There is a negative charge and a lone pair at the third vertex. Cyclopropene is the only compound in the set that is aromatic.

Learn more about compound at:

https://brainly.com/question/18882451

#SPJ11

all of the wavelengths of visible light combine to form

Answers

All the wavelengths of visible light combine to form white light.

What is visible light?

Visible light is made up of different wavelengths of electromagnetic radiation that range in color from violet (shortest wavelength) to red (longest wavelength). When all of the wavelengths of visible light are combined, they form white light.

This can be observed in various phenomena, such as the splitting of white light into its component colors when passing through a prism, or when white light is shone onto a surface and reflects back as white.

What is an electromagnetic radiation?

Electromagnetic radiation is a form of energy that travels through space as a wave, without the need for a medium to propagate. It is made up of electric and magnetic fields that oscillate perpendicular to each other and to the direction of the wave's travel.

To know more about electromagnetic radiation, visit:

https://brainly.com/question/10759891

#SPJ1

Complete question is: All the wavelengths of visible light combine to form white light.

a solenoid with 400 turns has a radius of 0.040 m and is 40 cm long. if this solenoid carries a current of 12 a, what is the magnitude of the magnetic field at the center of the solenoid? select one: a. 15 mt b. 9.0 mt c. 16 mt d. 4.9 mt e. 6.0 mt

Answers

The magnetic field at the center of the solenoid is 15 mT

We are required to calculate the magnetic field at the center of the solenoid.

Number of turns in solenoid, N = 400

Radius of solenoid, r = 0.040 m

Length of solenoid, l = 40 cm = 0.4 m

Current passing through solenoid, I = 12 A

Magnetic field at the center of the solenoid can be calculated using the following formula: B = μ_0 n I

μ_0 is the magnetic permeability of free space which is equal to 4π × 10⁻⁷ Tm/A.

N is the number of turns per unit length of the solenoid.

n = N/l Where N is the total number of turns in the solenoid and l is the length of the solenoid.

Substituting the given values in the above formula: B = (4π × 10⁻⁷ Tm/A) × (N/l) × I

We know that l = 0.4 m and N = 400Therefore, n = N/l = 400/0.4 = 1000 turns/m

Now, substituting the values of N, l, n and I in the above formula we get:

B = (4π × 10⁻⁷ Tm/A) × (1000 turns/m) × (12 A) = 0.015 T = 15 mT

To know more about magnetic field, refer here:

https://brainly.com/question/23096032#

SPJ11#

the regular satellites of the giant planets formed via the process of

Answers

The regular satellites of the giant planets formed via the process of accretion from a circumplanetary disk.

The giant planets in our solar system, such as Jupiter, Saturn, Uranus, and Neptune, are surrounded by a system of moons, which are divided into two main categories: regular and irregular. The regular satellites are large, spherical, and have nearly circular orbits around their host planets. They are believed to have formed from a circumplanetary disk of gas and dust that surrounded the planet during its formation. The gravitational forces of the planet caused the material in the disk to accrete into small bodies, which eventually coalesced into the regular satellites we see today.

To know more about satellites, here

brainly.com/question/21675499

#SPJ4

An asteroid Swift ha 3700 n on Earth what is the masa of the asteroid?

Answers

The mass of the asteroid Swift is approximately 377.55 kg.

What is mass?

Mass can be best described as the amount of matter present in any object or body.

On Earth, the acceleration due to gravity is approximately 9.8 m/s^2.

To calculate the mass of the asteroid Swift, we will  convert its weight from newtons to kilograms (kg), which is the unit of mass in the International System of Units (SI):

Weight = 3700 N

Acceleration due to gravity on Earth (g) = 9.8 m/s^2

Weight = Mass x Acceleration due to gravity

Mass = Weight / Acceleration due to gravity

Mass = 3700 N / 9.8 m/s^2

Mass = 377.55 kg

In conclusion,  The mass of the asteroid Swift is approximately 377.55 kg.

Learn more about mass at: https://brainly.com/question/1838164

#SPJ1

the diagram below shows four cannons firing shells with different masses at different angles of elevation. the horizontal component of the shell's velocity is the same in all four cases. in which case will the shell have the greatest range if air resistance is neglected? (a) cannon a (b) cannon b only (c) cannon c only (d) cannon d

Answers

The diagram below shows four cannons firing shells with different masses at different angles of elevation. the horizontal component of the shell's velocity is the same in all four cases. The case will the shell have the greatest range if air resistance is neglected is (a) cannon a

The cannon which would have the maximum range if air resistance is neglected is given by the expression R = (V²/g)sin(2θ). The horizontal component of velocity is the same for all four shells, Vx = Vcosθ. Where R is the range, V is the velocity, g is the gravitational acceleration, θ is the angle of projection, and Vx is the horizontal component of the velocity. The diagram below shows four cannons firing shells with different masses at different angles of elevation.

For the maximum range, we need to take the angle of projection to be 45°. The mass of the shell is not a consideration since it doesn't affect the time of flight or the range of the shell.Therefore, the maximum range is given by the highest value of V²sin(2θ)/g. As sin(90) = 1, sin(0) = 0, sin(30) = 1/2, sin(45) = √2/2, sin(60) = √3/2, sin(70) = 0.94, the maximum value of sin(2θ) is obtained when θ = 45°.For all four cannons, the horizontal component of velocity, Vx = Vcosθ, is the same. Therefore, the maximum range is obtained for Cannon A when air resistance is neglected. Therefore, the correct answer is (a) Cannon A.

Learn more about maximum range at:

https://brainly.com/question/321411

#SPJ11

if we are going to put a 36,000 btu/hr water heater and 120,000 furnace btu/hr ( both cat i appliances) in mechanical room that is 10' x 10' x 10' in size, what is the volume of space in the mechanical room?

Answers

The volume of the mechanical room is 1000 cubic feet

To calculate the volume of space in a mechanical room, given that a 36,000 btu/hr water heater and 120,000 furnace btu/hr (both cat i appliances) will be installed in a 10' x 10' x 10' room size, use the following formula:

Volume = Room Length x Room Width x Room Height

The volume of space in the mechanical room is given as follows:

Volume = 10' x 10' x 10'

Volume = 1000 cubic feet (cu ft)

Therefore, the volume of space in the mechanical room is 1000 cubic feet (cu ft).

Learn more about the volume of space room at https://brainly.com/question/26491581

#SPJ11

Suppose a neutron star with a mass of about 1.5MSun and a radius of 10 kilometers suddenly appeared in your hometown. How thick a layer would Earth form as it wraps around the neutron star's surface? Assume that the layer formed by Earth has the same average density as the neutron star. (Hint: Consider the mass of Earth to be distributed in a spherical shell over the surface of the neutron star and then calculate the thickness of such a shell with the same mass as Earth. The volume of a spherical shell is approximately its surface area times its thickness: Vshell=4πr^2×h. Because the shell will be thin, you can assume that its radius is the radius of the neutron star.)Express your answer to two significant figures and include the appropriate units.

Answers

Earth would form a layer around the neutron star with a thickness of 6.2 km.

Mass of the neutron star = 1.5 MSun. Radius of the neutron star = 10 km. Let's assume that the layer formed by Earth has the same average density as the neutron star. Since the mass of the neutron star is 1.5 MSun, this means that Earth will wrap around the neutron star's surface in a spherical shell over the surface of the neutron star whose mass is equal to the mass of the Earth.

Let's first calculate the volume of the neutron star, VNS:VNS = (4/3)πr³= (4/3)π(10 km)³= 4,188.8 km³. We can now calculate the mass of the neutron star, MNS, using its average density, D, which is:

D = MNS / VNS 1.5 MSun = MNS / 4,188.8 km³. Therefore, MNS = (1.5 MSun)(4,188.8 km³) = 6,283.2 MSun.

We know that the thickness, h, of the shell is needed to calculate the volume, Vshell, of the spherical shell with the same mass as Earth. The volume of a spherical shell is approximately its surface area times its thickness: Vshell=4πr^2.h, so we can now use the above equation to calculate h.h = Vshell / (4πr²)= MEarth / (D × 4πr²). Where MEarth is the mass of the Earth. MEarth = 5.97 × 10²⁴ kgD = MNS / VNS = (6,283.2 MSun) / (4,188.8 km³) = 1.50 × 10¹⁷ kg/km³r = 10 km. Putting in these values:h = (5.97 × 10²⁴ kg) / (1.50 × 10¹⁷ kg/km³ × 4π(10 km)²) = 6.2 km.

Therefore, Earth would form a layer around the neutron star with a thickness of 6.2 km.

Learn more about The Surface Area: brainly.com/question/17093154

#SPJ11

When an arrow is shot from a bow, it has kinetic energy in it. From where does it get its kinetic energy?

Answers

An arrow shot from a bow gets its kinetic energy from the potential energy stored in the bowstring and limbs. When the bowstring is pulled back, it stores energy in the limbs as elastic potential energy.

What is kinetic energy?

Kinetic energy is defined as the energy an object has due to its motion. When an arrow is shot from a bow, it is set in motion and therefore has kinetic energy. The kinetic energy of the arrow depends on its mass and speed. The heavier the arrow, the more kinetic energy it has, and the faster the arrow, the more kinetic energy it has.

The energy stored in the bow is transferred to the arrow when the string is released and the limbs snap back to their original position. This causes the arrow to be propelled forward with a significant amount of kinetic energy.

To know more about potential energy:

https://brainly.com/question/9547709

#SPJ11

a piston cylinder containing air has an area of 0.011 m2 and a piston with a mass of 20.4 kg. if the atmospheric pressure is measured to be 102.3 kpa, what is the gauge pressure of the air inside the piston cylinder? the absolute pressure?

Answers

The gauge pressure of the air inside the piston cylinder is 21.849 kPa if the atmospheric pressure is measured to be 102.3 kpa .

What is gauge pressure ?

The pressure relative to atmospheric pressure is known as gauge pressure. Gauge pressure is positive for pressures greater than atmospheric pressure and negative for pressures less than atmospheric pressure. In fact, atmospheric pressure increases the pressure in any fluid that is not contained in a rigid container. This occurs as a result of Pascal's principle.

Absolute pressure on piston = atmospheric pressure +  pressure on  piston

solving , 102.3 kPa

to know more about gauge pressure , visit ;

brainly.com/question/29341536

#SPJ1

The gauge pressure of the piston cylinder will be 17889.5 KPa and the absolute pressure of the piston cylinder will be 17991.8 KPa.

What is the gauge pressure?

The gauge pressure inside the piston cylinder is calculated by subtracting the atmospheric pressure from the total pressure inside the cylinder. Therefore, the gauge pressure of the air inside the piston cylinder is calculated as follows:

Pgauge = Ptotal - Patm
Pgauge = F/A - Patm
Pgauge = (20.4kg × 9.8m/s²) / 0.011m² - 102.3 kPa
Pgauge = 17991.8 kPa - 102.3 kPa
Pgauge = 17889.5 kPa


The absolute pressure inside the piston cylinder is the sum of the atmospheric pressure and the gauge pressure. Therefore, the absolute pressure of the air inside the piston cylinder is calculated as follows:

Pabsolute = Pgauge + Patm
Pabsolute = 17889.5 kPa + 102.3 kPa
Pabsolute = 17991.8 kPa

Learn more about Pressure here:

https://brainly.com/question/29341536


#SPJ11

Other Questions
consider a student loan of $15000 at a fixed APR of 12 % for 20 years we pay insurance company will pay you $1,175 each quarter for 27 years. you want to earn a minimum interest rate of .88 percent per quarter. what is the most you are willing to pay today for these payments? The Mongol conquest of China brought about which result?A the surrender of Japan to Kublai KhanB the establishment of the Yuan DynastyC Hinduism's rise as the dominant religion in ChinaD decreased trade between Asia and Europe which ledger can be updated solely from the receiving report? a. standard cost inventory ledger b. general ledger c. ap subsidiary ledger d. actual cost inventory ledger As a ______ I will provide estimates for each user story before Sprint Planning so that the team can jointly estimate and agree upon the size of each user story. Select one. A. Scrum Master B. Team Member (developer/tester) C. Product Owner An antioxidant that prevents the oxidation of LDL? Which of the following is FALSE with regard to obtaining a contract to work with an individual member on an issue?a. Obtaining a contract is usually not necessary in counseling and therapy groupsb. Both of the choices are false.c. The leader always needs to obtain a contract to hold the focus on an individuald. Neither of the choices is false. which statement accurately describes lipoprotein lipase? group of answer choices a. this enzyme is enzyme involved in making ketone bodies b. this enzyme is involved in cleaving arachidonic acid from phospholipids c. this enzyme is involved in digesting dietary lipids in the small intestine d. this enzyme is activated by glucagon; responsible for fatty acid release by adipose tissue e. this enzyme hydrolyzes triglycerides in vldl and chylomicrons for uptake by adipose tissue 1. Answer the question below. Use the rubric in the materials for help if needed.Taxes played a major role in the American Revolution and the shaping of the young United States. Describe the role that taxes played in the founding of the United States. In a population of 100 individuals, 16 exhibit a recessive trait. Find genotypic frequencies at homozygous (AA), heterozygous (Aa) and homozygous small a (aa) A floor which measures 15m x 8m is to be laid with tiles measuring 50cm by 25cm. Find the number of tiles required. The following joint probability density function for the random variables Y1 and Y2, which represent the proportions of two components in a somaple from a mixture of insecticide.f(y1,y2) = { 2, 0 an increase in the equilibrium nominal interest rate could be caused by which of the following changes? Highest Values in List Write a function called highest_values that accepts as arguments a list of numeric values and a single integer (n). The function should return a list made up of the largest n values from the argument list in order from lowest to highest. For example, if the argument list is [46, 82, 25, 61, 70, 33, 54] and n is 3, the return value should be [61, 70, 82]. Assume that the argument list contains at least n elements. in activity-based costing, the consumption of overhead resources is caused by blank . multiple choice question. an activity overhead direct labor material purchases The chart/graph which would best summarize the relative frequency distribution of a firm's total expenditures made by each department would be:a. a frequency polygon.b. a histogram.c. an ogive.d. a pie chart. Bacterial species with the ability to transform into endospores have the advantage of:A.) Reproducing faster than other bacterial speciesB.) Having faster motility than other bacterial speciesC.) Surviving unfavorable conditions better than other bacterial speciesD.) Sharing plasmids with other bacterial speciesE.) Being able to attach more firmly to slippery surfaces like teeth compared to other bacterial species which automobile and aviation trailblazer became the first british man to be killed in a powered aircraft accident when he died in a 1910 crash at hengistbury airfield? Calculate dry water discharge for 45,000 populated areas people where the rate of water consumption is 250 liters/people. Day and the ratio of wastewater/water supply is 0. 75 Water is cooled from 95C to 75C how much heat is released from this 80 g sample