Answer:
Te
K
Explanation:
Main group elements are elements designated and located on the s-block and p-block on the periodic table. The core group or prominent elements are the elements that make up those groups. These groupings comprise the most naturally rich and abundant elements. The main group elements are those whose characteristics are more predicted as a function of their periodic table location. From the given options, only Te and K are elements of the main-group.
Suppose that you move from a Suppose that you move from a town near the ocean to a town in the mountains. To what atmospheric changes would your body need to adjust? town near the ocean to a town in the mountains. To what atmospheric changes would your body need to adjust?
Answer:
all I can say is town near the ocean atmospheric changes will be cooler, warm, sea breeze, and fresh healthy air. Then when it comes to the mountain lot of change firstly there's a dry air
Which of the following was NOT explained by Dalton's atomic theory?
ANSWER:
A. the Law of Multiple Proportions
B. the difference between elements and compounds
C.?the difference between isotopes of an element
D. the Law of Conservation of Mass
Answer:
i think 1. law of muliple proportion
Explanation:
please like
Explain what happens when water reacts with sodium metal. Support your answer with the relevant
equation.
Sodium metal reacts rapidly with water to form a solution of sodium hydroxide (NaOH) and hydrogen gas (H2). This reaction is exothermic.
Equation:
2Na + 2H²0 --------}- 2NaOH + H²
If 0.250 L of a 5.90 M HNO₃ solution is diluted to 2.00 L, what is the molarity of the new solution?
Answer:
0.74 M
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M₁) = 5.90 M
Volume of stock solution (V₁) = 0.250 L
Volume of diluted solution (V₂) = 2 L
Molarity of diluted solution (M₂) =?
The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
5.90 × 0.250 = M₂ × 2
1.475 = M₂ × 2
Divide both side by 2
M₂ = 1.475 / 2
M₂ = 0.74 M
Thus, the molarity of the diluted solution is 0.74 M
aromatic compounds aliphatic compounds
Answer:
I hoped it helps you fod blessed:)
What are the equipments needed to determine the density of a liquid in laboratory ?
Answer:
A hydrometer is a special device used to determine the density of liquids.
Explanation:
I hope this helps you. Have a nice day!
1. What is the equivalent pressure measurement in mmHg of 2.50 atm?
Answer:
Atmosphere to mmHg Conversion Example. Task: Convert 8 atmospheres to mmHg (show work) Formula: atm x 760 = mmHg Calculations: 8 atm x 760 = 6,080 mmHg Result: 8 atm is equal to 6,080 mmHg.
Explanation:
This answer is helpfull for you I nowName the following compound. Group of answer choices 2-methyl-4-pentyne 4-methyl-3-propyl-1-pentyne 3-isopropyl-1-hexyne 1-nonyne 4-propyl-5-hexyne
The question is incomplete, the complete question is shown in the image attached
Answer:
3-isopropyl-1-hexyne
Explanation:
Organic compounds can be named from the structure of the compound. The name reveals the arrangement of atoms and bonds in the molecule.
If we look at the compound in the question, we will notice that the parent chain contains six carbon atoms, the triple bond is located at position 1 and the isopropyl substituent is attached to carbon 3.
Hence the proper name of the compound becomes, 3-isopropyl-1-hexyne.
why do people who do a lot of physical work need more carbohydrate?
Answer:
A person doing physical work needs lots of good carbohydrates to keep their energy levels up and proteins to repair a muscle that might get wear and tear from overexertion. Carbohydrate will help the person work for more extended periods.
When taking a measurement with a pH meter, keep the instrument in the _______storage solution or water until it is needed. Rinse the pH meter with
_______deionized water or acetone and gently pat dry. Place the meter in the sample solution, and record the measurement when the pH _______stabilizes or reaches the maximum value
Answer:
storage solution , deionized water, stabilizes
Explanation:
A pH meter is a scientific device or instrument that is used to measure the pH of a given aqueous solution thereby determining the nature of the solution whether it is acidic or basic or neutral.
While using the pH meter or taking the measurement using the pH meter --
it should be kept in a storage solution for effective working.Before using the device, it is rinsed with a deionized water and pat dry.Record the measurements when the pH meter stabilizes.Please can someone please help me !!
Answer:
False
Explanation:
17. The density of a population would influence which limiting factor?
O niche
O growth rate
O weather
O space
Answer:
The answer is growth rate
Explanation:
it will help you
Which one of the following reactions is NOT balanced?
2 CO + O2 + 2 CO2
2 SO2 + O2 +2 SO3
2 KNO3 + 10 K 5 K20 + N2
SF4 + 3 H2O → H2SO3 + 4HF
Answer:
co+ o2+ 2co2 is not balanced reaction
What volume (mL) of the sweetened tea described in Example 1 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example
The question is incomplete, the complete question is:
What volume (mL) of the sweetened tea described in Example 3.14 contains the same amount of sugar (mol) as 10 mL of the soft drink in this example. The example is attached below.
Answer: 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink
Explanation:
We first calculate the number of moles of soft drink in a volume of 10 mL
The formula used to calculate molarity:
[tex]\text{Molarity of solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex] .....(1)
Taking the concentration of soft drink from the example be = 0.375 M
Volume of solution = 10 mL
Putting values in equation 1, we get:
[tex]0.375=\frac{\text{Moles of sugar in soft drink}\times 1000}{10}\\\\\text{Moles of sugar in soft drink}=\frac{0.375\times 10}{1000}=0.00375mol[/tex]
Calculating volume of sweetened tea:
Moles of sugar = 0.00375 mol
Molarity of sweetened tea = 0.05 M
Putting values in equation 1, we get:
[tex]0.05=\frac{0.00375\times 1000}{\text{Volume of sweetened tea}}\\\\\text{Volume of sweetened tea}=\frac{0.00375\times 1000}{0.05}=75mL[/tex]
Hence, 75 mL of sweetened tea will contain the same amount of sugar as in 10 mL of soft drink
Please please help me
PLEASE HELP!!
How does temperature, agitation, and particle size affect solubility?
Answer:
At higher temperatures, particles move faster and collide more, increasing solubility rates.
Agitation increases solubility rates as well, by bringing fresh solvent into contact with the undissolved solute
The smaller the particle size, the higher (faster) solubility rate. Vice versa, the bigger the particle size, the lower (slower) solubility rate.
Explanation:
What is the volume of a flask containing 0.199mol of Cl2at a temperature of 313K and a pressure of 1.19atm
Answer:
43.0 L
Explanation:
Step 1: Given and required data
Moles of chlorine gas (n): 0.199 molTemperature (T): 313 KPressure (P): 1.19 atmIdeal gas constant (R): 0.0821 atm.L/mol.KStep 2: Calculate the volume of the flask (V)
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L
The answer is 4.30 L
A sample of gas is placed into an enclosed cylinder and fitted with a movable piston. Calculate the work (in joules) done by the gas if it expands from 5.33 L to 11.05 L against a pressure of 1.50 atm.
Explanation:
here is the answer. Feel free to ask for more chem help
what type of properties change ina physical change? Give an example to support your answer?
pls quick who will give the answer first will get the brainliest
Explanation:
We can observe some physical properties, such as density and color, without changing the physical state of the matter observed. Other physical properties, such as the melting temperature of iron or the freezing temperature of water, can only be observed as matter undergoes. A physical change physical change involves a change in physical properties. Examples of physical properties include melting, transition to a gas, change of strength, change of durability, changes to crystal form, textural change, shape, size, color, volume and density.hope it helps.stay safe healthy and happy.Which procedure could a student use to examine an intensive property of a rectangular block of wood
Find the mass.
Record the length. Measure the volume. Determine the density.
Answer:
density
Explanation:
The procedure that the student could use to examine an intensive property of a rectangular block of wood is to determine its density. Density is intensive because it is the ration between the mass and the volume.
Answer: find the mass option A
Explanation:
Identify the options below that are results of adding a catalyst to a chemical system.
The reaction rates are increased.
The reaction quotient is unaffected.
The reaction quotient decreases.
The equilibrium constant is unaffected.
Answer:
The correct options are a, b and d
Explanation:
A catalyst is a substance that increases the rate of a chemical reaction by reducing the activation energy. Le Catelier's principle explains how a substance or an "action" can affect a reaction in equilibrium.
The principle states that when a change is made to the conditions of a reacting system at equilibrium, the position of the equilibrium moves to counteract the change made. These changes are change in temperature, pressure, volume and/or concentration. These changes will either cause the equilibrium to shift forward or backward.
However, the presence of a catalyst DOES NOT affect a chemical equilibrium/equilibrium constant nor does it affect the reaction quotient because the same amount of reactants and products are available just as in uncatalyzed reaction except that the reaction proceeds faster (which does not affect equilibrium).
The rate of reaction is given as the time required by the reactant to convert into the product. The addition of catalyst increases the rate of reaction, while the reaction quotient and the equilibrium remain unaffected.
What is a catalyst?A catalyst is a chemical or compound that adds to the reaction and lowers the activation energy by providing an alternative path to the reaction.
The catalyst takes part in the reaction but did not consume in the chemical reaction.
The equilibrium and the reaction quotient are dependent on the conversion of the reactant to the product. The catalyst is not used in the reaction and thus did not affect the reaction quotient or the equilibrium.
Hence, options A, B, and D are correct for the use of catalysts in the chemical reaction.
Learn more about catalysts, here:
https://brainly.com/question/17052831
Question 65 pts
(07.02 MC)
During a reaction, ΔH for reactants is −750 kJ/mol and ΔH for products is 920 kJ/mol. Which statement is correct about the reaction? (5 points)
Group of answer choices
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is endothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed.
It is exothermic because the energy required to break bonds in the reactants is greater than the energy released when the products are formed.
Answer:
It is endothermic because the energy required to break bonds in the reactants is less than the energy released when the products are formed
Explanation:
A reaction may be endothermic or exothermic. In an endothermic reaction, energy is absorbed by the process while in an exothermic process energy is given out by the process.
Recall that the enthalpy change of a reaction = enthalpy of products - enthalpy of reactants
Hence, where the energy required to break bonds in the reactants is less than the energy released when the products are formed, the reaction is endothermic.
For an endothermic reaction, the enthalpy change of the reaction is positive.
In this case, enthalpy of reaction = 920 - (-750) = 1670 kJ/mol
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Answer:
(S)-Pentan-2-ol was treated sequentially with methanesulfonyl chloride (CH3SO2Cl) and then potassium iodide. What is the final product that forms
Explanation:
Alcohols are poor leaving groups.
To make -OH group a better-leaving group, it should be treated with sulfonyl chlorides.
Then, methane sulfonyl group makes will be substituted on the -OH group and forms sulfonyl esters and makes it a better leaving group.
After that treating with KI proceeds through nucleophilic bimolecular substitution and the final product formed is shown below:.
Element X has two naturally occurring isotopes, 35X and 36X . 35X has a percent natural abundance of 30%, while 36X has a percent natural abundance of 70%. What is the average atomic mass of element X
Answer:
= 35.7 amu
Explanation:
Isotopic fractional Wt Avg mass
mass (amu) abundance (= % / 100) = Isotopic mass X (= % / 100)
X-35 35 0.30 10.5 amu
X-36 36 0.70 25.2 amu
__________________________________________________________
Average Atomic Mass of Element X = ∑ Wt. Avg. Masses = 35.7 amu
viagnesiumi anu
If I have 100g of Magnesium, how much Magnesium Nitride will I theoretically create?
O 24.3g Mg3 N2
O 138.4g Mg3 N2
415.2g Mg3 N2
O 200g Mg3 N2
Answer:
Theoretical yield is 138.4 g
Explanation:
In the first step we determine the reaction:
3Mg + N₂ → Mg₃N₂
Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:
100 g . 1mol/ 24.3g = 4.11 moles of Mg.
Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride
Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂
We convert mass to moles, to find the theoretical yield:
1.37 mol . 100.9 g/mol = 138.2 g
define saturated and unsaturated fats
Answer:
unsaturated fats, which are liquid at room temperature,are different from saturated fat because they contain one or more double bonds and fewer hydrogen atoms on their carbon chain.
You want to quickly set up a temporary water bath in your lab with a volume of 10.0 L and a temperature of 37.0°C. You only have hot water from your hot water faucet (temperature = 61.0°C) and cold water from your cold water faucet (temperature = 22.0°C). What volume of hot water (in liters) must you mix with cold water to get 10.0 L of 37.0°C water? Assume the specific heat of the water is 4.184 J/g･K and that the water has a density of 1.00 g/mL.
Answer:
Volume of hot water required = 3.85L
Explanation:
Suppose volume of hot Then volume of water required cold water = = x L (10.0-x) L
Heat given by hot water (Q₁)
= mass of hot water x heat capacity of water X AT
= x L * 4.184 * J / g. к x(61.0-37.0) °℃.
And Heat absorbed by cold water (Q₂) = (10.0-x) L x 4.184 J/g*k x(37+0 -220) C
Since energy is consumed, Q₁ = Q2.
i.e. X*l *4.184*J/g*k*24C = (10.0-x)L x 184 5
24 x 15 (10.0-x) = 150. - 15x
x = 150. (24+15) = 3.846
So, volume of hot water required. = 3.85 L
When the temperature of the water increases the water becomes hot.
According to the question the volume of hot water required = 3.85L.
Suppose volume of hot Then the volume of water required cold water is [tex]x L (10.0-x) L[/tex]
All the data are given in the question, which is as follows:-
Heat has given by hot water (Q₁)The formula we are going to use is as follows:-
= mass of hot water x heat capacity of water X AT
= [tex]x L * 4.184 *(61.0-37.0) ^oC[/tex]
The heat absorbed by cold water (Q₂) = [tex](10.0-x) L *4.184 *(37+0 -220) ^oC[/tex]
Since energy is consumed, Q₁ = Q2.
[tex]X*l *4.18424C = (10.0-x)L * 184 524 * 15 (10.0-x) = 150. - 15xx = 150. (24+15) = 3.846[/tex]
Hence, the volume of hot water required is = 3.85 L
For more information, refer to the link:-
https://brainly.com/question/2817451
If 0.21J of heat cause a 0.308 degree C temperature change, what mass of water is present?
a 0.0702 g
b 0.00540 g
c 0.163 g
d 18.4 g
Answer:
The correct answer is Option c (0.163 g).
Explanation:
Given:
Heat energy,
Q = 0.21 J
Specific heat,
c = 4.184 J/g°c
Change in temperature,
ΔT = 0.308°C
As we know,
⇒ [tex]Q=mc \Delta T[/tex]
By substituting the values, we get
[tex]0.21=m\times 4.184\times 0.308[/tex]
[tex]m=\frac{0.21}{0.308\times 4.184}[/tex]
[tex]=\frac{0.21}{1.28867}[/tex]
[tex]=0.163 \ g[/tex]
How many ozone molecules can each chlorine atom in the stratosphere destroy
Answer:
100,000
Explanation:
A sample of hydrogen nitrate or nitric acid, HNO 3 contains 18.8 x 1022 molecules.
How much mass of nitric acid are in the sample?
Answer:
19.7 g.
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to realize this problem can be solved by using a molecules-moles-mass relationship, starting with the given molecules, using the Avogadro's number and the molar mass of nitric acid (63.01 g/mol):
[tex]18.8x10^{22}molec*\frac{1mol}{6.022x10^{23}molec}* \frac{63.01g}{1mol} \\\\=19.7g[/tex]
Regards!