Answer: Zr or Zirconium
Explanation: Neon has 10 Protons and four times ten is 40. And Zirconium has 40 protons the symbol for Zirconium is Zr
Neon has 10 protons, the element which has four times more protons than Neon in its nucleus is Zirconium(Zr).
What is a proton?Every atom has a proton, a subatomic particle, in its nucleus. The particle possesses an electrical charge that is positive and opposite to the electrons. A single proton has a mass of only [tex]1.673[/tex]×[tex]10^{-27}[/tex] kilogram when isolated. Just slightly less than a neutron's mass.The atomic number is the number of protons in an element's nucleus. Each element is given a unique identification by this number. The number of protons in the nucleus is constant in all atoms of a given element. The nucleus of an atom of pure hydrogen is made up entirely of one proton. All other elements' nuclei almost usually have neutrons in addition to protons.Protons need not just be found in atoms' nuclei. Protons acquire fascinating, peculiar, and potentially hazardous characteristics when they are discovered outside of atomic nuclei, which are analogous to neutrons in comparable situations. Protons have another characteristic, they can be accelerated by electric and/or magnetic fields because they carry an electric charge. During solar flares, a lot of high-speed protons and atomic nuclei holding them are released. The acceleration of the particles by the earth's magnetic field results in geomagnetic storms, which are ionospheric disturbances.To learn more about Proton, refer to https://brainly.com/question/1805828
#SPJ2
number of SO42- ions in 20.4 g Cr2(SO4)3
✅
IamSugarBee
One mole of or 392 g of chromium sulphate gives 3 moles of sulphate ions. Thus 30 g of chromium gives 0.15 moles of sulphate ions or 9.39 ×10²² ions.
What are ions?Ions are charged substances formed by electron lose or gain by an atom. If an atom gain an electron it acquire one unit of negative charge and if it lose an electron it acquires a positive charge.
The ionization of chromium sulphate is written as follows:
[tex]Cr_{2}(SO_{4})_{3} \rightarrow 2Cr^{3+} + 3SO_{4}^{2-}[/tex]
Hence, one moles of chromium sulphate forms 3 moles of sulphate ions. One mole of chromium sulphate is 392.18 g/mol. Thus number of moles 20.4 g of the compounds is 20.4 / 392.18 = 0.052 moles.
The number of moles of sulphate ions produced by 0.052 moles of chromium sulphate is calculated as follows:
0.052 × 3 = 0.15 moles.
One mole of sulphate ion contains 6.022 × 10 ²³ions. Thus number of ions in 0.15 moles is 0.15 ×6.022 × 10 ²³ = 9.39 ×10²² ions.
To find more about sulphate ions, refer the link below:
https://brainly.com/question/22698826
#SPJ2
In photosynthesis, carbon dioxide (CO2) and water (H20) combine to form the sugar glucose (C6H1206) in the following reaction:
6CO2 + 6H20 - CH1206+?
Assuming this equation is balanced, which part is missing from the product side?
-12 hydrogen atoms
-06 carbon atoms
-6 oxygen atoms
-12 oxygen atoms
The part that is missing from the product side = 6 oxygen atoms.
The equation of photosynthesisPhotosynthesis is the process by which green plants traps in energy from the sun, through their chlorophyll, which they use in the manufacture of sugar with oxygen as a by-product.
The balanced equation of photosynthesis;
6CO2 + 6H2O + (energy) → C6H12O6 + 6O2
From the equation given,
6CO2 + 6H20 - CH1206+?
The missing part of the product = 6O2 (-6 oxygen atoms)
Learn more about photosynthesis here:
https://brainly.com/question/19160081
The density of copper is 8.68 g/mL use the density value to determine how many moles are
contained in a 125 mL sample.
Answer:
17.1 mol
Explanation:
(8.68g/mL * 125 mL) = 1085 g
1085 g/ (63.55 g/mol) = 17.1 mol
A red shirt obsorbs red light true or false
Answer:
A red shirt appears red to our eyes because the shirt absorbs the red wavelengths of visible light. The shorter the wavelength of light, the more energy it has.
Explanation:
Please mark as brainliest
what about this?
Which of these best explains the distribution of natural resources?
A. Resources are distributed evenly across Earth's systems.
B. Resources are distributed where they are needed by humans.
C. Resources are distributed unevenly and often must be moved for human use.
D. Resources are located in areas where they can be transported without damage to the environment.
Answer:
c
Explanation:
resources are distributed unevenly and often must be moved for human use
Answer:c
Explanation: correct on edg 2020
a competition between a given substance and its dissolved species is ?
Answer:
Explanation:
It is odd to describe the presence of a given substance and its dissolved species as a competition but the state is called an equilibrium in solubility.
Answer:
Solubility
Explanation:
Mark that
The amount of given substance and dissolved species is constant at equilibrium .
As per le ch atler's principle
If you change the concentration it would affect the Equilibrium n
How do you write 72,000,000 in scientific notation
Answer:
7.2 × 10^7 is the correct answers.
Thank you ☺️☺️
Which equation describes the process of photosynthesis?
carbon dioxide + glucose + sunlight → water + oxygen
oxygen + water + sunlight → glucose + carbon dioxide
oxygen + glucose + sunlight → water + carbon dioxide
carbon dioxide + water + sunlight → glucose + oxygen
Answer:
The FIRST option, give me brainliest answer pls
Explanation:
The photosynthesis equation is as follows: 6CO2 + 6H20 + (energy) → C6H12O6 + 6O2 Carbon dioxide + water + energy from light produces glucose and oxygen
Answer:
(a)
carbon dioxide+ glucose+ sunlight * water + oxygen
Explanation:
I Took This Test Before, I Hope You Get A Good Grade On The Rest Of The Questions
How many moles in 6.4 g of H2O?
46 mol
124 mol
.025 mol
.36 mol
Explanation:
Given
Weight of Water (H2O) = 6.4 gms
To find
Number of moles of water = ?
Solution
we know that molar mass of H2O = 18 g
Now,
[tex]Number \: of \: moles =\frac{Given \: weight \: of \: substance}{molar \: mass \: of \: substance} [/tex]
Number of moles = 6.4/18 = 0.355~ 0.36 moles
Thanks for joining brainly community
Answer:
Explanation:
h2o = 18 gmol-1
1mol =18 g
18 g =1mol
6.4g =1/18*6.4
= 0.355
=0.36mol
The box shows the element nitrogen as it appears in the
periodic table,
N
Nitrogen
Which two parts are needed to make a neutral atom of nitrogen?
A Aruscles with seven protons and seven neutrons
B. A nucleus with three protons and four neutrons
C. Electron clouds with a total of 14 electrons
D. Electron clouds with a total of seven electrons
Answer:
Option D. Electron clouds with a total of 7 electrons.
Explanation:
For an atom to be neutral (i.e having a charge of zero), the number of protons and electrons must be equal.
Thus, to know which option is correct, we shall determine the number of protons and electrons in the nitrogen atom as given in the question above.
From the question given above, we obtained the following:
Atomic number = 7
Mass number = 14
Number of protons =?
Number of electrons =.?
Next, we shall determine the number of protons in the nitrogen atom as follow:
Atomic number of an element is simply defined as the number of protons in the atom of the element. Mathematically,
Atomic number = proton number
Atomic number = 7
Therefore,
Number of protons = 7
Next, we shall determine the number of electrons in nitrogen atom as follow:
Since the atom is neutral (i.e having a charge of zero), the number of protons and electrons are equal i.e
Number of protons = number of electrons
Number of protons = 7
Therefore,
Number of electrons = 7
Thus, the nitrogen atom must have 7 electrons in order for it to be neutral.
**** Check ****
Charge of atom = Proton – Electron
Charge = 0
Proton = 7
Electron = 7
Charge of atom = Proton – Electron
0 = 7 – 7
0 = 0
Answer:
A and D
Explanation:
Took test.
Guys i need help with these questions! I will give brainliest to the first person who answers
Determine the number of moles of CO2 that contain 7.93 x 1023 O atoms.
Answer:
This question requires use of Avogrado’s constant that states there are 6.02 x10^23 constituent particles contained in the amount of a substance given by one mole. Constituent particles are usually molecules, ions or atoms. Therefore there are 18.06x10^23 total atoms, 12.04x10^23 oxygen atoms, 6.02x10^23 carbon atoms and 6.02x10^23 carbon dioxide molecules.
Which has a higher lattice energy? Na3n or Na2O. And why?
Because the extent of ionic charge is more important than ionic radius in calculating the lattice energy of ionic compounds. Because the ionic charge of the N3-ion is greater than that of the F-ion, the Na3N molecule has a higher lattice energy than the NaF complex.
The lattice energy increases when the ion charge variable is increased. As a result, ions with higher charge values generate ionic compounds with higher lattice energies. As a result, ions with lower charges lower the lattice energies of their compounds.
How many particles are in 56 L of nitrogen gas at standard conditions?
0 1.2 x 1023 particles
O 2.5 particles
O 1.5 x 1024 particles
O 2.5 x 1024 particles
Answer:
The molar mass of N
2
is 28 g/mol.
56 grams of N
2
=
28g/mol
56g
=2moles
At STP, 1 mole of any gas occupies a volume of 22.4 L.
2 moles of N
2
at STP will occupy a volume of 2×22.4=44.8L
Which electromagnetic wave has lowest frequency and shortest wavelength
How many moles in 109.6 g of Cl₂?
Answer:
1 grams Cl2 is equal to 0.014103178856514 mole.
Explanation:
Hope This Helps
Have A Great Day
A large beaker has 6.75 L of a solution containing 5.25 moles of copper (II) sulfate in water. What is the molarity of the solution?
A: 9.9 M
B: 10 M
C: .78 M
D: 8M
The molarity of the solution in a large beaker that has 6.75 L of a solution containing 5.25 moles of copper (II) sulfate in water is 0.78M.
How to calculate molarity?The molarity of a solution can be calculated using the following formula:
M = n/V
M = molarity of solutionn = number of moles V = volume of solutionMolarity = 5.25/6.75
Molarity = 0.78M
Therefore, the molarity of the solution in a large beaker that has 6.75 L of a solution containing 5.25 moles of copper (II) sulfate in water is 0.78M.
Learn more about molarity at: https://brainly.com/question/12127540
What do you know about social science?
Answer:
once hydrogen ions are outside the membrane they are allowed to flow back in. this flow is changed to energy that is stored in the bonds of new molecules.
Explanation:
explain how heat is related to thermal energy
Answer: Heat energy is another name for thermal energy.
Explanation:
As thermal energy comes from moving particles, it is a form of kinetic energy. Thermal energy comes from a substance whose molecules and atoms are vibrating faster due to a rise in temperature.
Answer:
When a substance heats up, the rise in temperature makes these particles move faster and bump into each other. Thermal energy is the energy that comes from the heated up substance. The hotter the substance, the more its particles move, and the higher its thermal energy.
3. Materials that easily break when a force is applied like glass are said to be
A. malleable B: brittle C. ductile D. elastic
4. Which of the materials below is a poor conductor of heat?
A Iron B. Wood C. Gold D. Copper
5. is the characteristic or trait that can be observed when a matter reacts to
another substance,
A. Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property
6. property is the characteristic or trait of matter that does not depend on the amount.
A. Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property/
7. is the characteristic or trait of matter that can be observed or perceived with our senses easily
without changing its chemical composition.
A Intensive Physical Property
C. Chemical Property
B. Extensive Physical Property D. Physical Property
8. Phase of matter where particles are relatively far apart and practically independent of each other.
A. Solid B. Liquid C. Gas D. Plasma
Cloccify the following pyamnles as pure substance or mixture:
Answer:
3. B
4. B
5. C
6. A
7. D
8. C
Explanation:
3. A material or substance is said to be BRITTLE If it can be broken easily when there is an application of force e.g glass
4. A material that cannot conduct heat and electricity is called an INSULATOR. Among the given options, WOOD is a poor conductor of heat i.e. it cannot withstand hear. Iron, gold and copper are all metals, hence, very good conductors.
5. Matter which constitutes all substances tend to react with one another, however, when the observed trait or characteristic is called a CHEMICAL PROPERTY.
6. Physical property of matter can either be intensive or extensive. INTENSIVE PHYSICAL PROPERTY is that characteristic or trait of matter that does not depend on the amount. Example is temperature, density etc
7. PHYSICAL PROPERTY is the property of matter that can be observed or perceived with our senses easily without changing its chemical composition or nature. Example of physical property is melting.
8. Matter exists in three states; solid, gas and liquid. In the GASEOUS state of matter, particles are relatively far apart or scattered and practically independent of each other. This allows gas to be able to diffuse.
What cells do you think is in metaphase? why?
state three reasons why air is
•Chassifield as a mixture
One is through sublimation
Answer:
Air is considered as a mixture because it is composed of various separate components. The air has no characteristic properties of its own. ur welcome :)
Explanation:
Normally the capital ÎGo° for a reaction would be determined at standard temperature with each reactant at a concentration of 1 M. Letâs assume that the 1 M 2-PG solution will reach the same equilibrium ratio that would be observed under standard conditions. The enzyme enolase catalyzes the conversion of 2-PG to phosphoenolpyruvate (PEP) in living systems. You find that when you add enolase to your 2-PG solution it reaches an equilibrium with 0.68M PEP and 0.32 M 2-PG. What is the capital ÎGo° for this reaction?
Use R= 1.987 cal/mol.K
a. +559 cal/mol
b. - 559 cal/mol
c. +379 cal/mol
d.-379 cal/mol
Answer:
d.-379 cal/mol
Explanation:
ΔG = ΔG⁰ + RT ln K
for equilibrium ΔG = 0
ΔG⁰ + RT ln K =0
ΔG⁰ = - RT ln K
PG ⇒ PEP
K = [ PEP ] / [ PG ]
= .68 / .32
= 2.125
ΔG⁰ = - 1.987 x 273 x ln 2.125
= - 409 Cal / mole
Option d is the nearest answer .
predict the block, period and group of (Z:12)
Explanation:
Atomic number = 12
Block = s-block
Period = 3rd
Group = 2nd
Need Help ASAP!!!! Due in 5 min!!!
Living cells are classed as either prokaryotic or eukaryotic. Which of the following characteristic(s) identify eukaryotic cells? Select all that apply.
are produced by division of another cell
comprise most multi-celled organisms
contain cytoplasm
are the smallest unit of living matter
mostly single-celled organisms
have membrane-bound organelles
contain DNA
have a nucleus
cement company uses 9.30 × 105 kg of limestone daily. The limestone decomposes upon heating, forming lime and carbon dioxide:
CaCO3(s) CaO(s) + CO2(g)
What volume of CO2 at 683 torr and 25.0°C is released into the atmosphere daily by this company?
The volume of CO₂ at 683 torr and 25.0°C released into the atmosphere daily by this company is 2.53×10⁸ L
How to determine mole of CaCO₃ that decomposed Mass of CaCO₃ = 9.30×10⁵ kg = 9.30×10⁵ × 1000 = 9.3×10⁸ gMolar mass of CaCO₃ = 100 g/mol Mole of CaCO₃ =?Mole = mass / molar mass
Mole of CaCO₃ = 9.3×10⁸ / 100
Mole of CaCO₃ = 9.3×10⁶ moles
How to determine the moles of CO₂ producedBalanced equation
CaCO₃ —> CaO + CO₂
From the balanced equation above,
1 mole of CaCO₃ reacted to produce 1 mole of CO₂
Therefore,
9.3×10⁶ moles of CaCO₃ will also react to produce 9.3×10⁶ moles of CO₂
How to determine the volume of CO₂Pressure (P) = 683 torr = 683 / 760 = 0.899 atmTemperature (T) = 25.0 °C = 25 + 273 = 298 KGas constant (R) = 0.0821 atm.L/Kmol Number of mole (n) = 9.3×10⁶ molesVolume (V) =?V = nRT / P
V = (9.3×10⁶ × 0.0821 × 298) / 0.899
V = 2.53×10⁸ L
Learn more about stoichiometry:
https://brainly.com/question/14735801
What is the density of an object with a mass of 60 g and a volume of 2 cm3?
Answer:
The answer is 30 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 60 g
volume = 2 cm³
We have
[tex]density = \frac{60}{2} \\ [/tex]
We have the final answer as
30 g/cm³Hope this helps you
Definitions of heat and work
Answer:
Hear is the transfer of thermal energy between system.
Work is the transfer of mechanical energy between two systems.
Which two forms of heat transfer work together to heat water in a plastic bottle?
a. reflection and convection
b. conduction and convection
c. radiation and reflection
d. convection and reflection
59 Q.No. 28 b Hydrogen peroxide can act as oxidizing as well as reducing agent with example.
Answer:
Hydrogen peroxide can function as an oxidizing agent as well as reducing agent.
H2O2 act as oxidizing agent in acidic medium.
Explanation:
Example : 2FeSO4 +H2SO4 +H2O2 —>
(ferrous sulphate)
Fe2(SO4)3 +2H2O
(ferric sulphate)