Which does not provide for enhanced genetic mixing?
A.Mix-matching
B.Random segregation
C.Crossing over
D.Fertilization that occurs through sexual reproduction

Answers

Answer 1

Answer:

A. Mix-matching

Explanation:

Sexual reproduction increases genetic variation in offspring by three main mechanisms: 1-random assortment of chromosomes during meiosis 2-genetic recombination, and 3-random fusion of gametes from different parents. In the first place, the pairs of homologous chromosomes are randomly oriented in metaphase I before they separate in Anaphase I. In consequence, daughter gamete cells receive different combinations of chromosomes. Second, recombination (also called crossing over) refers to the interchange of genetic material between non-sister chromatids during prophase I, thereby also increasing genetic variation in daughter cells. Third, the fusion of two haploid cells (i.e., gametes) in diploid organisms results in the formation of a single zygote cell that develops into a new organism, thereby the process of random fertilization between any two gametes generates different diploid zygotes, increasing thus genetic diversity.


Related Questions

What is produced/made when our food is burned?
___+___+___

Answers

Answer:

it should be ( carbon dioxide, oxygen, and energy

Explanation:

Explanation:

Oxygen /carbon dioxide and energy

This is the process happens continuously inside our body .This is called respiration

A darkly staining region that may appear within the nucleus on an electron micrograph is called a(n) ______. This is the location of rRNA production.

Answers

Answer:

the answer is nucleolus.

Explanation:

the production of ribosomes makes it dark or stained

what is cell membrane ?​

Answers

Explanation:

the thin outside layer that surrounds the cytoplasm of a cell and controls the movement of materials into and out of the cell. cell membrane.

hope it helps.stay safe healthy and happy....

2. Many microscopic organisms are clear, making them almost impossible to see under a microscope.
What can be done to a sample to make it easier to see?

Answers

Use iodine.

Iodine solution makes the sample you want to study of microscopic organism more visible.

What are practical applications of genetic engineering?

Answers

Answer:

Medicine, agriculture, animals, and even human mutations ;o

Explanation: Nothing much to explain.

Blood banks dispose of blood that has low levels of bisphosphoglycerate. What would be the probable reason for doing so

Answers

Answer:

Erythrocytes low in BPG does not unload O2 very well.

can someone help me complete the unfinished DNA strands please?

Answers

Answer:

it is T G C A T

Explanation:

as in DNA adenine pairs with thymine and cytosine with guanine. You can also remember it as Apple Tree and Car Garage

What term means removing the nucleus from a cell?
nuclear proliferation
enucleation
nuclear fission
disnucleation

Answers

Answer:

Enucleation

Explanation:

Which is an example of temporal isolation?
flowers that bloom in different months
birds that have different mating calls
fruit flies that mate in different locations
squirrels that have different fur colors

Answers

flowers that bloom in different months

Flowers that bloom in different months is an example of temporal isolaton.

What is temporal isolation?

Temporal isolation is a type of reproductive isolation that occurs when two or more species reproduce at different times, thereby preventing mating between them. This can happen in a variety of ways, such as when one species is active during the day and the other at night, or when they breed during different seasons.

Temporal isolation can lead to the evolution of new species because it prevents interbreeding between populations that would otherwise exchange genetic material. Over time, these isolated populations can accumulate genetic differences that make it increasingly difficult for them to interbreed, leading to the formation of distinct species that are reproductively isolated from one another.

Learn more about temporal isolation, here:

https://brainly.com/question/7741418

#SPJ5

When two aqueous solutions that differ in solute concentration are placed on either side of a semipermeable membrane and osmosis is allowed to take place, the water will Group of answer choices exhibit a net movement to the side with lower solute concentration. exhibit a net movement to the side with lower free water concentration. exhibit an equal movement in both directions across the membrane. exhibit a net movement to the side with higher free water concentration

Answers

Answer:

exhibit a net movement to the side with lower free water concentration

Explanation:

The correct answer would be that the water will exhibit a net movement to the side with lower free water concentration.

Osmosis is generally defined as the movement of water molecules through semi-permeable membranes from the region of higher water potential or lower solute concentration to the region of lower water potential or higher solute concentration.

From the definition, it becomes obvious that there would be a net movement of water between the two solutions to the side with higher solute concentration or lower free water concentration.

Which answer best defines what the Lotka-Volterra predator-prey model mathematically describes?-The competition among many predator species for a dingle prey species.-The simultaneous effect of a predator population on a prey population and a prey population on a predator population over time.-The effect of a predator population on a prey population.-The capture efficiency and assimilation rate of a predator, which is dependent on the number of individuals in a prey population.

Answers

Answer:

The simultaneous effect of a predator population on a prey population and a prey population on a predator population over time.

Explanation:  

The mathematical models of Lotka-Volterra equations explain the existing interaction between species in which prey and predator influence and affect each other. The model follows a few assumptions,    

The ecosystem is isolated and closed. There is no migration. The whole individuals are reproductively equivalent. In the absence of the predator, prey shows an exponential growth rate. The prey is in the ideal environment.  When there is no prey, the predator population decreases exponentially because of the lack of food. The predator environment is ideal, but it is limited by prey density.  The predation rate is proportional to the encounters rate, which also depends on density.  The predators affect the prey populations, inducing its decrease proportionally to the number of prey and predators present.  The prey population also influences the predator population proportionally to the number of encounters between the two species.  

In these equations, the variable D is the number of predators, and P the number of prey items.

The parameters are always constant:  

• r1: prey growth rate.  

• a1: predator hunting success.  

• r2: predator growth rate.  

• a2: the success of the predator in hunting and feeding.

In nature, many factors affect interactions, such as dense-dependent factors and dense-independent factors. Also, in reality, there are stochastic factors. Stochasticity refers to the variability in the system involving those factors that are affecting or influencing population growth. Stochasticity might be related to good years and bad years for population growth.

In real situations, the compliance of the whole assumption does not occur. The previously mentioned constants might vary, constantly changing the interaction between the predator and the prey. These parameters change in different degrees, resulting in varying circumstances for both species.

A sequence is defined recursively by the formula f(n + 1) = –2f(n). The first term of the sequence is –1.5. What is the next term in the sequence?

Answers

Answer:

3

Explanation:

n = - 1.5

f(n+1) = -2f(n)

f(n+1) = -2 * -1.5

f(1+1) = 3

f(2) = 3

When amino acids are degraded for energy or glucose production, their amine groups are incorporated by the liver into ____.

Answers

Answer:

The correct answer is - urea.

Explanation:

In our body, to produce energy or produce glucose our body breaks the amino acids, it gets from proteins mainly. These amino acids are mainly breakdown into amine groups.

The human body has a unique ability to pack ammonia(amine group) by converting it to urea and incorporated and produced by the liver using 2 molecules of ammonia (NH3) and 1 molecule of carbon dioxide (CO2).  This incorporated urea is then secreted from the liver and incorporated into the urine in the kidney for further process.

A 70-year-old male presents with back pain, fever, and weight loss. He reports that he had a recent respiratory infection from which he thought he recovered. Tests revealed increased white blood cell count, and a diagnosis of endogenous osteomyelitis was made. The primary organism causing this condition is

Answers

Answer:

This question lacks options, options are:

a.Fatigue fracture

b.Stress fracture

c.Pathologic fracture

d.Greenstick fracture.  

The correct answer is c.

Explanation:

A pathological fracture is one produced in a weakened bone as a result of trauma that would not cause such an effect on bones that had their composition, resistance or flexibility properties at the correct levels, that is, a pathological fracture is any loss of bone continuity that occurs in a weakened bone, secondary this weakness to the development of a disease. Endogenous osteomyelitis is a blood-borne bacterial infection that spreads to the bone.


Why are groups of small cells better than one large cell at moving material in
and out?
A. They have a smaller volume.
B. They have more cell structures,
C. They have a greater surface-to-volume ratio.
O
D. They have a lower surface-to-volume ratio.

Answers

Answer:

C. They have a greater surface-to-volume ratio.

Explanation:

Because these smaller cells can access and pass through the membranes of the other cell membranes and permeable coverings easily and voluntarily unlike larger cells. It is also efficient for these smaller cells to penetrate and travel, delivering and transporting goods and materials such as nutrients, oxygen and waste throughout the body without consuming enough energy and conserving lesser space.

For simple reasons, they are faster, more efficient and consumes little space, and most especially depletes lesser energy. So, many small cells have more surface area than one large cell.

Even though the tubers are genetically identical why the plants that grow from them may not be the same height ?
please explain


Please answer correctly.​

Answers

Answer:

I've grown potatoes on top of loose earth that's covered by a thick layer of loose straw. It allows the green leafy parts to easily push through to the sunlight above while keeping developing tubers protected from light. I've grown them this way because I really enjoy the taste of fresh new potatoes and have no desire to store mature potatoes for winter. I want to get the most baby potatoes possible while not damaging the plants with tiny potatoes not big enough to eat yet. It also keeps the potatoes cleaner than if grown under the soil.

When I start lifting the straw back to pick the largest new potatoes, I can see the development of the other potatoes. While the biggest potatoes are 1 1/2 to 2 inches in size, others range in size all the way down to 1/4 inch or less.

When a specific garden plant blooms, most of the flowers open within a very short time period. Now think of tomato plants. The flowers continue to open over a period of months and both ripe tomatoes, large and small green tomatoes as well as flowers can all be found on the same plant. Not all the fruit will be ripe before cold weather kills the plant.

Potatoes are closely related to tomatoes and like tomatoes, not all the tubers will be full size when the plant dies back. So I'd say it's neither genetics nor environmental factors but the inherent life and growth cycle of potatoes that account for the tuber size difference.

The difference in the tuber size in plants of potatoes and tomatoes does not depend upon its genetics or environmental factors rather it depends upon the inherent life and growth cycle of the plant.

What is the growth cycle in potatoes?

Growth cycles are the recurrent fluctuations in the series of deviations from the usual trend of the plant growth. Thus, the growth cycle contractions in the plant include slowdowns as well as absolute declines in the activity, whereas business cycles contractions include only the absolute declines or recessions.

Potatoes are the plant species which are closely related to tomatoes and just like tomatoes, not all the tubers will be full size when the plant dies back in time. So, it is neither the genetics nor the environmental factors but the inherent life and growth cycle of the potato plants that account for the tuber size difference in the plants which are genetically identical to each other.

Learn more about Potato here:

https://brainly.com/question/27648708

#SPJ2

Why the water is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance?

Answers

Why is water colorless?

It is actually not. It is weakly blue which becomes apparent when a lot of it is gathered in one place. It is definitely not very strongly colored though. That is very common. Very few pure simple substances are strongly colored. Pure salt and sugar are transparent and colorless too. In bulk they look white because the tiny crystals scatter light, but snow does the same. A liquid forms one homogeneous mass.

In nature, of course, substances are rarely pure. Therefore not so many things look colorless. It only takes a little bit of a strongly colored impurity to color the whole thing. Just look at Himalaya salt or unrefined sugar or orange juice.

Why is water tasteless?

Because we don’t need to taste it. We get a good idea of the water content of food from the feel of it. Other liquids are usually oils, which feel very different. Besides it is not all that important exactly how much water is in one particular food item, if we need hydration then we drink stuff which is definitely mostly water.

The sense of taste not registering water frees up capacity to detect other things.

Why is water odorless?

Likewise because we don’t need to smell it. There is no real evolutionary advantage to be able to instantly tell the moisture content of the air. Better to use the sense of smell to detect poisons, food nearby, relatives or strangers etc. than to tell how the weather is today. We can tell how the weather is by other means.

Answer:

Water is inorganic, transparent, delicate, odourless, and almost colourless.

Explanation:

How colourless is the water?

In fact, it isn't. It's weakly blue, and when many of them are gathered together, it gets obvious. However, it's obviously not very colourful. This is a pretty common occurrence. Very few simple materials are coloured intensely. Pure salt and sugar are also colourless and clear. They look white in mass because the little crystals disperse light, but the snow does the same. A fluid forms a uniform bulk.

Substances are seldom pure in nature, of course. Not so much looks colourless, therefore. It takes just a few colourful uncleanness to colour the whole thing. Look for Himalayan salt or sugar or orange juice unprocessed.

Why is water odourless?

We don't have to taste it because of this. From that feeling, we obtain a decent estimate of the water content of food. The oils, which feel much different, usually are other liquids. Moreover, the exact amount of water in a certain food item is not all so important, if we need moisture we will certainly drink things that are primarily water.

The sensation of taste without water releases the ability to discern other things.

Why does water smell?

We don't have to smell it, too. There is no genuine advantage of being able to identify the humidity of the air instantaneously. It's better to use the sense of smell to detect poisons, nutrients, relatives or strangers, etc. IN various ways, we can tell how the weather is.

Which statement about inheritance is true?
Girls get most of their traits from their moms; boys get most of their traits from their dads.
Male offspring will always have an X-linked genetic disease if the mom is a carrier.
Fathers always determine the gender of the offspring in humans.
Males never have Y chromosomes.

Answers

Answer:

The correct answer is the third statement.

Explanation:

In humans, the males possess one X and one Y chromosome, while the females possess two X chromosomes. Thus, the female always donates X chromosome to the gamete. In any case, the female always generates a similar kind of gamete. While the male either pass X or the Y chromosome to the progeny.  

When the gamete with the X chromosome combines with the female gamete than the offspring would possess XX chromosomes and will be a female. On the other hand, when the gamete comprising the Y chromosome combines with the female gamete than the offspring would possess the XY chromosome and will be a male. Thus, it is the father who determines the gender of the offspring.

Wrong answersGirls get most of their traits from their moms; boys get most of their traits from their dads.

This is wrong. Parents gender does not affect traits passed on.

Males never have Y chromosomes.

This is wrong, Males have to have a Y chromosome. (XY)

Male offspring will always have an X-linked genetic disease if the mom is a carrier.

This is wrong. The male offspring have a 50/50 chance if the mother is a carrier, if she has the deseace than all the sons will have the decease.

Correct answerFathers always determine the gender of the offspring in humans.

This is because the mom is XX and the dad is XY. The mom gives the X in the gene, and the dad gives the X for daughters (X,X) and gives the sons a Y (X,Y) Males are always XY.

If the mom is a carrier, h,  then it will get passed down  50% of the time, and when it gets passed down to the males, they wiill have the deseace. If the mom passes the deacease down to the daughters, 50% will be a carrier too if the dad does not have the deseace. If the dad has the deacease, than 50% of the daughters will have the deacease, and the other 50% will be carrier, and still, 50% of the sons will have the deacease, while the other 50% will be completely clean. So in total 25% of the offspring will be a carrier, 50% will have the deacease, and the other 25% will not have the deacease or be a carrier.  

Sejak bilakah mereka berkawan?​

Answers

What does this mean?

The spinal cord extends from the foramen magnum of the skull to the first or second lumbar vertebra, where it terminates in the __________.

Answers

Answer:

conus medullaris

Explanation:

Given their size and complexity, biological molecules such as carbohydrates, proteins, lipids, and nucleic acids can also be referred to as ____________.

Answers

Answer:

This question lacks options, the options are;

A. Enlarged molecules

B. Macromolecules

C. Inorganic molecules

The answer is B

Explanation:

As mentioned in this question, carbohydrates, proteins, lipids, and nucleic acids are the basic biomolecules found in nature. They are all polymeric substances, hence, are made up of smaller units called monomers.

Asides from being biomolecules, these four molecules are also referred to as MACROMOLECULES based on their large size and complex nature. Macromolecules are molecules that are relatively large in size composing of an aggregate of monomer. Hence, these biomolecules are macromolecules.

A friend who is not taking your Biology course fills a cup with ice and then a drink. The friend asks you why the ice in the cup is floating, and you are able to say that Group of answer choices water vapor is less dense than liquid water. ice is denser than liquid water. convection currents caused by temperature differences push upwards on the ice. the molecules are closer together in ice than in liquid water. the molecules are farther apart in ice than in liquid water.

Answers

Answer:

the molecules are farther apart in ice than in liquid water.

Explanation:

The correct answer would be that the molecules of water are farther apart in ice than in liquid water.

Water molecules in ice form are usually less dense than water molecules in liquid form. The water molecules in ice usually arrange themselves in a lattice form, unlike the random form in liquid water. This arrangement makes water molecules in ice to be more evenly spread out than in their liquid counterpart. Thus, ice is usually less dense than liquid water and will obey the principle of flotation by floating on water.

The ice in the cup is floating is due to: the molecules of water are farther apart in ice than in liquid water.

The density of a substance is the mass of the substance per unit of its volume. The formula to calculate the density is :

[tex]D = \frac{m}{v}[/tex], where D = density, m = mass of the substance, and v = volume

The density is the factor that determines if a substance will float or sink. The less-dense substance floats whereas, the more-dense object sinks.When water freezes to form ice then water molecules show expansion to create an open cage-like structure.This cage-like structure decreases the density of ice than the water so mass ice will have more volume as compared to liquid water.

Thus, the ice floats on water - the molecules of water are farther apart in ice than in liquid water.

Learn more about the density:

https://brainly.com/question/17569847

MCQ ...help me........​It's a last question

Answers

It would be C !!!!!!!

After a severe burn, new skin may grow outward from the hair follicles. Why would new growth originate at the hair follicles

Answers

Answer:

xsdcfvgbhnj

Explanation:

Which of the following characteristics must an object possess in order to be considered alive? Select all that apply

Answers

Explanation:

responds to the environment.

It grows and develops.

It produces offspring.

It maintains homeostasis.

It has complex chemistry.

It consists of cells.

flexbooks dot ck12 dot org 

What is a limiting factor?
A. A factor in the ecosystem that causes population growth
to decrease.
B. A factor in the ecosystem that eliminates several
members of different species.
C. A factor in the ecosystem that targets one specific
species and greatly reduces their numbers.

Answers

Answer:

A

Explanation:

limiting factor is based on the predominant importance in restricting the size of a population

how to get remove black tartar from teeth.please help thank you​

Answers

Answer:

1. Brush regularly

2. Electronic or powdered toothbrushes may get rid of it

3. Rinse daily

4. Don't smoke

Explanation:

Hope this helps!

Brush your teeth regularly 2 times a day .
Avoid electric brush

Inside a skeletal muscle cell, a set of small cylinders called _______ are assembled into larger cylinders called _______.

Answers

Answer:

Myofibrils

Intercalated disc

Explanation:

Myofibrils in a skeletal muscle cell are a set of cylinders which are repeated form of sacromeres.

Intercalated discs are assembled into larger cylinders and are involved in cell to cell communications, they link cells to get her and transmit electrical impulses within the sacrolemma

What is one way a mountain might form?
A. Ocean wave force
B. Gravitational pull
C. Glacier movement
D. Volcanic activity
(A p e x)

Answers

Answer:

D.) Volcanic Activity

Explanation:

B is the answer i think

Compare and contrast the cell structures / organelles found in plant and animal cells.

list 3 organelle/structures plant and animal cells have that are the same
list 2 organelles/structures plant and animal cells have that are different

Answers

Answer:

Same: Mitochondria,Cell membrane,Vacuole

Different: Cell wall,Chloroplast

Explanation:

I hope this helps :)

Other Questions
The average defect rate on a 2010 Volkswagen vehicle was reported to be 1.33 defects per vehicle. Suppose that we inspect 100 Volkswagen vehicles at random. (a) What is the approximate probability of finding at least 157 defects A Blue Cross/Blue Shield insurance plan that allows members to choose any provider, but offers higher levels of coverage when members obtain services from network providers would be an example of: Consider golfers who led the Professional Golfers' Association of America (PGA) in winnings at different points in time. Note that the winnings are nominal figures (unadjusted for inflation).Year Golfer Nominal Winnings (Dollars) U.S. CPI (1983 = 100) Winnings in 2009 Dollars1965 Jack Nicklaus 140,752 31.5 1970 Lee Trevino 157,037 38.8 1982 Craig Stadler 446,462 96.5 2009 Tiger Woods 10,508,163 214.5 10,508,163Fill in the missing values in the table above. What does the verse in Song of Solomon 5:16 mean His mouth is most sweet thank you very much 14.With earned value management (EVM), the Government can determine if a program is currently experiencing a/n f(x) = 2 9xFind f(-2) Ava graphs the function h(x) = x2 + 4. Victor graphs the function g(x) = (x + 4)2. Which statements are true regarding the two graphs? Select three options.Avas graph is a vertical translation of f(x) = x2.Victors graph is a vertical translation of f(x) = x2.Avas graph moved 4 units from f(x) = x2 in a positive direction.Victors graph moved 4 units from f(x) = x2 in a positive direction.Avas graph has a y-intercept of 4. can books and stories about characters and event that are not real teach us anything useful Given that g(x) = 2x ^ 2 - 2x + 8 , find each of the following. a) g(0) b) g(- 2) C) g(3) d) g(- x) e) g(1 - t) A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).a. Plot the data as engineering stress versus engineering strain.b. Compute the modulus of elasticity.c. Determine the yield strength at a strain offset of 0.002.d. Determine the tensile strength of this alloy.e. What is the approximate ductility, in percent elongation?f. Compute the strain energy density up to yielding (modulus of resilience).( Load in N Load in lb Length in mm Length in in. 2.000 2.002 2.004 2.006 2.008 2.010 2.020 2.040 2.080 2.120 2.160 2.200 2.240 2.270 2.300 2.330 Fracture 50.800 7330 15,100 3400 23,100 5200 30,400 6850 34,400 7750 38,400 8650 41,3009300 44,800 10,100 46,200 10,400 53, 47,300 10,650 54.864 47,500 10,700 55.880 46,100 10,400 44,800 10,100 42,600 9600 3,400 8200 Fracture Fracture Fracture 50.851 50.902 50.952 51.003 51.054 1650 51.308 51.816 52.832 848 56.896 57.658 58.420 59.182 could use some help on this please The first excited state of a particular atom in a gas is 6.1 eV above the ground state. A moving electron collides with one of these atoms, and excites the atom to its first excited state. Immediately after the collision the kinetic energy of the electron is 3.2 eV. What was the kinetic energy of the electron just before the collision Think of 5 positive integers that have a mean, median, mode, and range of 6. Suppose the population of a country is 1.1 million and the labor force is 800,000. 760,000 are employed. Assume that full-employment occurs at a 4 percent unemployment rate at a real GDP level of $100 billion. Based on the information above use Okun's Law to find how much potential GDP has been lost because the economy is not at full employment The beginning inventory of BG Action Figures is understated by $7 million at December 31, 20x8. What is the effect on 20x8 cost of goods sold? Group of answer choices $7 million overstated $7 million understated no effect none of the above A retired couple has up to $50,000 to invest. As their financial adviser, you recommend that they place at least $35,000 in Treasury bills yielding 1% and at most $10,000 in corporate bonds yielding 3%. Write and graph the system of equations of linear inequalities that describes the possible amounts of each investment. An element of the environment that causes a population the decrease is A) the birthrate minus the death rateB) the carrying capacity C) a limiting factorD) the death rate A number cube has faces numbered 1 to 6.What is true about rolling the number cube one time? What groups are generally in charge of running private or volunteer health organizations?A. local groupsB. government employeesC. concerned individualsD. healthcare workers Bims Corporation uses the weighted-average method in its process costing system. The Assembly Department started the month with 2,400 units in its beginning work in process inventory that were 70% complete with respect to conversion costs. An additional 62,000 units were transferred in from the prior department during the month to begin processing in the Assembly Department. There were 20,000 units in the ending work in process inventory of the Assembly Department that were 60% complete with respect to conversion costs. What were the equivalent units for conversion costs in the Assembly Department for the month