Think of 5 positive integers that have a mean, median, mode, and range of 6.

==========================================================

Explanation:

The graph of [tex]y \ge -\frac{1}{3}x+2[/tex] has the boundary y = (-1/3)x+2 which is a solid line. This line goes through (0,2) and (3,1). We shade above the boundary because of the "greater than" sign.

The graph of y < 2x+3 has a dashed boundary line of y = 2x+3, and we shade below the boundary because of the "less than" sign.

The two regions overlap in the upper right corner where it's shaded in the darkest color. The points (2,2), (3,1) and (4,2) are in this upper right corner region. If we plug the coordinates of each point into each inequality, then we'll get true statements.

For instance, let's try (x,y) = (2,2) into the first inequality

[tex]y \ge -\frac{1}{3}x+2\\\\2 \ge -\frac{1}{3}(2)+2\\\\2 \ge -\frac{2}{3}+2\\\\2 \ge -\frac{2}{3}+\frac{6}{3}\\\\2 \ge \frac{-2+6}{3}\\\\2 \ge \frac{4}{3}\\\\2 \ge 1.33\\\\[/tex]

Which is true since 2 is indeed larger than 1.33, so that confirms (2,2) is in the shaded region for [tex]y \ge -\frac{1}{3}x+2\\\\[/tex]

Let's check the other inequality as well

[tex]y < 2x+3\\\\2 < 2(2)+3\\\\2 < 4+3\\\\2 < 7\\\\[/tex]

That works too. So (2,2) is in BOTH shaded regions at the same time; hence, it's a solution to the system. You should find that (3,1) and (4,2) work for both inequalities also. This will confirm choice A is the answer.

--------------------------------

Extra info (optional section)

A point like (3,-1) does not work for the first inequality as shown below

[tex]y \ge -\frac{1}{3}x+2\\\\-1 \ge -\frac{1}{3}(3)+2\\\\-1 \ge -1+2\\\\-1 \ge 1\\\\[/tex]

Since -1 is neither equal to 1, nor is -1 larger than 1 either. The false statement at the end indicates (3,-1) is not a solution to that inequality.

Based on the graph, the point (3,-1) is not above the blue solid boundary line. All of this means we can rule out choice B.

You should find that (1,-2) is a similar story, so we can rule out choice C. Choice D can be ruled out because (2,0) is not a solution to the first inequality.

Answer:

7/30

Step-by-step explanation:

P = 1/15 + 1/6 = (2+5)/30 = 7/30

Answer:

a) The reorder point necessary to provide a 95 percent service probability is 1557 units.

b) The Z value of 0.74 corresponds to 77% service probability.

Step-by-step explanation:  

Average weekly demand (d) = 315 units  

The standard deviation of weekly demand (\sigmad) = 90 units  

Lead time (L) = 4 weeks  

At 95% service level value of Z = 1.65  

Reorder point = d x L + safety stock  

[tex]= d \times L + (Z \times \sigma d \times \sqrt L)\\\\= 315 x 4 + (1.65 x 90 x \sqrt 4)\\\\= 1260 +(1.65 x 90 x 2)\\\\= 1260 + 297\\\\= 1557 units[/tex]

b) Earlier the safety stock was 297 units(calculated in part a)

Now the safety stock is reduced to 55%.so,55% of 297 = 163.35 units  

So the new safety stock = 297 - 163.35 = 133.65  

[tex]Safety stock = Z \times \sigma d \times \sqrt L\\133.65 = Z x 90 x 2\\133.65 = 180Z\\ Z = 133.65/180\\Z = 0.74[/tex]  

The Z value of 0.74 corresponds to 77% service probability.

Step-by-step explanation:

SAVE

HOME HACKS & ANSWERSBUILDING & REMODELINGWALLS

How to Calculate How Many Bricks to Build a Wall

By KELVIN O'DONAHUE

Hunker may earn compensation through affiliate links in this story.

...

To estimate the number of bricks needed to build a wall, first measure a single brick.

A wall built from brick not only adds security and strength to your property, it also provides a pleasing geometric backdrop for the landscaping. Because of the bricks' size and weight, homeowners generally arrange to have the amount needed for a large project delivered by the masonry company or lumberyard. Doing so requires that you estimate the number of bricks needed before placing the order.

Step 1

Measure the length and thickness of one of the bricks that will be used in the wall. A standard brick is 2-1/4 inches wide and 7-1/2 to 8 inches long. Add 1/2 inch to both the length and thickness to account for the mortar joint between adjacent bricks. For example, a brick that is 2-1/4 inches by 7-1/2 inches, plus mortar joints, will occupy 2 3/4 inches by 8 inches.

Step 2

Measure the length of the space for the wall and convert the number to inches. Divide the length in inches by the length of a brick plus mortar joint. For example, a wall 36 feet, 8 inches long is 440 inches long (36 X 12 = 432 + 8 = 440). Each course (single layer) of bricks will need 440 / 8 = 55 bricks.

SAVE

HOME HACKS & ANSWERSBUILDING & REMODELINGWALLS

How to Calculate How Many Bricks to Build a Wall

By KELVIN O'DONAHUE

Hunker may earn compensation through affiliate links in this story.

...

To estimate the number of bricks needed to build a wall, first measure a single brick.

A wall built from brick not only adds security and strength to your property, it also provides a pleasing geometric backdrop for the landscaping. Because of the bricks' size and weight, homeowners generally arrange to have the amount needed for a large project delivered by the masonry company or lumberyard. Doing so requires that you estimate the number of bricks needed before placing the orderStep 3

Determine the desired height of the wall in inches, and divide the height by the thickness of a brick and mortar joint. For example, a wall 72 inches tall requires 26.18 courses of 2-3/4-inch-wide bricks; rounded up to 27 courses.

Step 4

Multiply the number of bricks per course (55) by the number of courses (27) to obtain the number of bricks in a single-thickness wall or veneer. For our example, the number is 1,485 bricks. Double that number for a double-thickness wall. Bricklayers generally add 5 percent to the estimate to cover broken or wasted bricks, for about 1,560 bricks in this case

Answer:

[tex]P = (7, -\frac{3}{5})[/tex]

Step-by-step explanation:

Given

[tex]A = (-9,5)[/tex]

[tex]B = (11,-2)[/tex]

[tex]m : n = 4 : 1[/tex]

Required

Point P

This is calculated as:

[tex]P = (\frac{m * x_2 + n * x_1}{m + n}, \frac{m * y_2 + n * y_1}{m + n})[/tex]

So, we have:

[tex]P = (\frac{4 * 11 + 1 * -9}{4 + 1}, \frac{4 * -2 + 1 * 5}{4+1})[/tex]

[tex]P = (\frac{35}{5}, \frac{-3}{5})[/tex]

[tex]P = (7, -\frac{3}{5})[/tex]

Answer:

answer is C

Step-by-step explanation:

General equation of a line is expressed as shown:

y = mx+c where;

m is the slope or gradient of the line

c is the intercept of the line

Given the equation of the line graph as y =2.5x

Comparing the given equation with the general equation, it is seen that m = 2.5 and c = 0 (since there is no value for the intercept)

Based on the explanation, the y-intercept of the graph is therefore 0

Answer:

B

Step-by-step explanation:

To find the x-intercept, substitute in

0 for y and solve for x

To find the y-intercept, substitute in 0 for x and solve for y

x-intercept(s): None

y-intercept(s): (0,1)

Answer: 5,987

Step-by-step explanation:

I believe your answer is D.) $900

204 + 96 = 300

300 x 3 = 900

I hope this is correct and helps!

1000 is the correct answer !

Answer:

like about $500 and because of the ca!erlsn

Answer:

2. (x,y) → (x+7,-y)

Step-by-step explanation:

Point A:

The original coordinate of point A was (-6,-6).

The coordinate after the transformation is A'(1,6), which eliminates option 3.

Point B:

The original coordinate of point B was (-2,4).

After the transformation, we have B'(5,-4), which eliminates option 1 and option 4. This means that the correct answer is:

2. (x,y) → (x+7,-y)

Answer:

A is the equation in standard form

Step-by-step explanation:

Answer:

nr.herkyrsfdlufshfsyfs

Step-by-step explanation:

dsfsyfksutryrysyrslufzmfyzydzufmzmhfzl

hdhfuthfzhkrskyrsgj

1 by 4 ^ 256 is equal to 4 and 1 by 4 ^ 64 will be root 4 so here the answer will be 4 into 4 root 4

there option 4 will be correct

Answer:

2

Step-by-step explanation:

Answer:

2

Step-by-step explanation:

Equivalent question: Find the slope of line going through points (1,-5) and (10,13).

Line points up vertically and subtract. Then put 2nd difference on top of first difference.

(1,-5)

(10,13)

---------'subtracting

-9, -18

So the slope of the line gong through point's (1,-5) and (10,13) is -18/-9=2.

The common difference of an arithmetic sequence whose first term is -5 and whose tenth term is 13 is 2.

Thank you for answer Yey can I answer in my subject

Answer: 98%

Step-by-step explanation:

[tex]\frac{77+65+x}{3} =80\\\frac{142+x}{3} =80\\142+x=80*3\\x=240-142=98[/tex]

Answer:

[tex]{ \tt{y = \frac{2 {x}^{2} + 5x + 2}{ {x}^{2} - 4x + 3 } }} \\ x - intercept : y = 0 \\ { \tt{ \frac{2 {x}^{2} + 5x + 2 }{ {x}^{2} - 4x + 3 } = 0 }} \\ \\ { \tt{2 {x}^{2} + 5x + 2 = 0}} \\ x = \frac{1}{2} \: \: and \: \: x = - 2[/tex]

9514 1404 393

Answer:

Step-by-step explanation:

Let c represent the number of messages sent by Chang. Then Keiko sent (c-7) messages, and Abdul sent 4(c-7) messages. The total number sent was ...

  c + (c -7) +4(c -7) = 109

  6c -35 = 109 . . . . . . . . . . simplify

  6c = 144 . . . . . . . . . . . add 35

  c = 24 . . . . . . . . . . . divide by 6

  c-7 = 17

  4(c-7) = 68

Keiko sent 17, Chang sent 24, and Abdul sent 68 text messages.

Answer:

Step-by-step explanation:

I have this saved on my computer in notepad b/c this type of question get asked sooo often :/

point P1 (-4,-2)  in the form (x1,y1)

point P2(3,1)  in the form (x2,y2)

slope = m

m = (y2-y1) / (x2-x1)

My suggestion is copy that above and save it on your computer for questions like this

now use it

Point 1  , P1 = (2,-4)   in the form (x1,y1)

Point 2 , P2 = (4,-1)  in the form (x2,y2)

m = [ -1-(-4) ]  /  [ 4-2]

m =  (-1+4) / 2

m = 3 / 2

so now we know the slope is  3/2  :)  

[tex](a^2 - b^2) = (a + b)(a - b)[/tex]

Answer:

y= (3/2)x - (5/2)

Step-by-step explanation:

Slope-intercept form is y=mx+b. So, 3x-2y=5 can be rearranged to slope-intercept form.

We need to isolate the y and get it by itself, so let's subtract the 3x from both sides.

-> -2y = 5 - 3x

Now we need to get rid of the -2 so that the y will be completely alone. So, divide the -2 from both sides of the equation.

-> y = (5/-2) (-3x/-2)

Now rearrange, and the negatives from the 3x and 2 cancel each other out and we are left with:

-> y = 3/2 x - 5/2

9514 1404 393

Explanation:

Your question covers a good bit of the material in an algebra course. The short answer is, "the same way you solve a numerical equation." The point of algebra is that literals can stand for numbers, and so be manipulated the same way numbers are.

Expressions are evaluated according to the Order of Operations. For equations involving a single variable, the equation specifies what operations are being performed on that variable. To find the vale of the variable (solve for that literal), you need to "undo" the operations that are performed on it. As with many problems that have layers, you work down through the layers from the outside in. Generally, that means working through the list of operations "backwards," undoing the last one first.

Simple example

  y = mx + b . . . . . . solve for x

In this equation, the operations performed on x are ...

In accordance with the above, the first thing we do is "undo" the addition of b. (Note that this could be a number or literal--or even a complicated expression--and the process would be exactly the same.) To "undo" addition, we add the opposite.

  y -b = mx +b -b   ⇒   y -b = mx

Next, we "undo" the multiplication by m. That is, we divide by m, or multiply by the reciprocal of m. Either is the same as the other.

  (y -b)(1/m) = (mx)(1/m)   ⇒   (y -b)/m = x

Now, we have solved this literal equation for x.

_____

Throughout this process you must adhere strictly to the properties of equality. That is, anything you do to one side of the equation must also be done to the other side.

The reason you study inverses and identity elements is so you understand that addition of an additive inverse produces the additive identity element:

  x + (-x) = 0

Similarly, multiplication by the multiplicative inverse (reciprocal) produces the multiplicative identity element.

  x · (1/x) = 1

When other operations are involved, such as raising to a power, trig functions, roots, logs, exponentiation, each of these has an associated inverse function that produces an identity:

  (x^a)^(1/a) = x^1 = x

  arcsin(sin(x)) = x

  (√x)^2 = x

  10^(log(x)) = x   or   log(10^x) = x

Some of these inverse functions have restricted domains, so care must be used when solving equations involving them.

When a variable of interest appears on both sides of the equal sign, then you must figure a way to rearrange the equation so the terms with the variable can be combined.

Example:

  ax + b = cx +d . . . . . solve for x

  ax -cx = d -b . . . . . . subtract (cx+b). (Of course, this is subtracted from both sides of the equation.)

  x(a -c) = d -b . . . . . combine x-terms

  x = (d -b)/(a -c) . . . . divide by the coefficient of x

Note that we had to divide the entire right-side expression by the x-coefficient, so had to enclose it in parentheses.

More Complicated Example:

A recent Brainly problem asked for the solution to ...

  T = 2π√(L/g) . . . . solve for L

Here, L is divided by g, a root taken, and that multiplied by 2π. Undoing these in reverse order, we first divide by 2π, square both sides to undo the root, then multiply by g to undo the division:

  [tex]T=2\pi\sqrt{\dfrac{L}{g}}\\\\\dfrac{T}{2\pi}=\sqrt{\dfrac{L}{g}}\\\\\left(\dfrac{T}{2\pi}\right)^2=\dfrac{L}{g}\\\\\boxed{L=g\left(\dfrac{T}{2\pi}\right)^2}[/tex]

The problem posted on Brainly had numbers where some of these variables are. That does not affect the solution method, except that sometimes numerical values can be combined where literal values cannot.

_____

Key Points