Which career do you think it would be most difficult to break into and why?

Answers

Answer 1

Answer:

Fashion and interior design.

I hope it will help you.


Related Questions

Physics Homework
1. A swimmer is in Lake Lanier practicing a 100 m individual medley event. They swim East 25
m using butterfly, West 25 m using backstroke, East 25 m using breaststroke, and finally West
25 m using freestyle. This event takes them 70 seconds to complete.
T
a. What was the swimmer's average speed?
b. What was the swimmer's average velocity?

Answers

Explanation:

a. Average speed = distance / time

= 100 m / 70 s

= 1.43 m/s

b. Average displacement = displacement / time

= 0 m / 70 s

= 0 m/s

Distance is the length of the path traveled.  Displacement is the difference between the final position and initial position.

PLEASE EXPLAIN AND YOU WILL GET BRAINLIST Ms. R is curious if the type of gasoline she uses in her car affects how many miles she can drive on a single tank of gas. (Fuel efficiency). Which of the following would be the BEST scientific question for her to test?

1) How does driving farther affect the type of gas used?

2) How does a Mazda compare to a Civic?


3) How does changing the type of fuel affect the number of miles a car can be driven on a single tank of gas?


4)How does the color of the car affect its internal temperature?

Answers

Option 3 is the most reasonable

I hope this helped <3

Please give brainliest :)

The diagram shows the layers formed when 10 mL each of corn starch, water, and vegetable oil were slowly poured into a glass cylinder. A tall cylinder with 3 layers is shown. The top layer is labeled Oil, the middle layer is labeled Water and the bottom layer is labeled Corn Starch. A paper clip released gently into the liquid settles at the bottom of the cylinder. What best compares the densities of the substances? Oil is denser than the other liquids, and all liquids are denser than the clip. The clip is denser than the three liquids, and water is denser than oil. Oil is denser than water but less dense than the clip. Corn starch is denser than the other liquids and the clip.

Answers

Answer:

The clip is denser than the three liquids, and water is denser than oil.

Explanation:

In this exercise, the Archimedes principle must be used, on the thrust that is equal to the weight of the dislodged liquid

          B = ρ_liquid g V_body

when a body is placed on a liquid, the equilibrium equation must be fulfilled

          W - B = 0  

          W = B

            ρ_body g V_body =  ρ _liquid  g V’

from this expression we see that we have three possibilities

* the density of the body is less than the density of the liquid, therefore the body floats

* The density of the body is equal to the density of the liquid, the body is in equilibrium with the liquid, neither floats nor sinks

* the density of the body greater than that of the liquid, the body sinks.

Based on this, the liquids are arranged in the cylinder according to their density.

           ρ_oil ​​ <  ρ_water  <  ρ_starch

as the clip sinks

the density of the clip is higher than that of liquids

We review the final statements and the correct one is: Clip is denser than liquids and water is denser than oil

Answer:   D

Explanation:

The density of a certain type of glass is 25g/cm3. A piece of the glass has a mass of 125g. Calculate its volume

Answers

Given:-

Density = 25 g/cm³

Mass = 125 g

To be calculated:-

Calculate its volume.

Formula used:-

Density = Mass/volume

=> 25 = 125/Volume

=> Volume = 125/25

=> Volume = 5 cm³

For a body of Mass ‘m’ moving in a circle of radius ‘r’ if its velocity is halved, what will be the effect on the value of centripetal force?

Answers

Explanation:

F = mv²/r

If the velocity is halved:

F' = m(v/2)²/r

F' = ¼ mv²/r

F' = ¼ F

The centripetal force is reduced by a factor of 4.

A car with a mass of 1,500 kg is traveling at a speed of 30 m/s. What force must be applied to stop the car in 3 seconds?​

Answers

Explanation:

F = ma

F = m Δv / Δt

F = (1500 kg) (0 m/s − 30 m/s) / 3 s

F = -15,000 N

A sack is pushed from rest , find the velocity after 6 m while moving at 10 m/s 2

Answers

Answer:

The velocity after 6 m while moving at 10 m/s² ≈ 10.95 m/s

Explanation:

The given parameters are;

The given distance of the sack movement = 6 m

The acceleration, a of the sack = 10 m/s²

The velocity of the is given from the relation;

v² = u² + 2×a×s

Where;

u =The initial velocity = 0

Which gives;

v² = 2×a×s

v² = 2×10×6 - 120

v = √120 = 2·√30 m/s

The velocity after 6 m while moving at 10 m/s² is 2·√30 m/s or approximately equal to 10.95 m/s.

8. What is the kinetic energy of a car that has a mass of 1000 kg and is moving at a speed of 30 m/s?

Answers

Answer:

Hope it will help you :)

Explanation:

What should you do if...
3. You are in doubt about any procedure?

4. Your clothes catch on fire?

5. You broke a glass?

6. Chemical splashes in your eyes?

7. To prevent chemical splashes into an eye or  a foreign object gets stuck in one?

8. You injure yourself or lab partner?

9. You use hot plate in the experiment?

Answers

Answer:

3. you need to ask your available lab instructors what to do.

4. You immediately have to drop down your cloth and roll it to extinguish the fire or move to the emergency shower if available

5. You have too keep calm and report to the lab instructor but do no shout.

6. Move immediately to the eye rinse basin if available and wash your eyes gently and thoroughly

I NEED HELP WITH 59-61

PLEASE HELP ME!!!!!

60. What value would the acceleration on the object above have now? Does it change anytime during its fall?

Describe the motion of its fall.

61. If there was no air resistance, which object falls faster: an unfolded piece of paper or an anvil?

Answers

Answer:

Explanation:

59 ) Graph has been given in the file attached .

60)  Since the  v- t graph is a straight line so the acceleration is constant . This acceleration does not change with time . It is also called acceleration due to gravity . Its value is 10 m /s²

61 ) If there is no resistance , both the objects will fall together and reach the earth simultaneously if fallen from same height . it is so because each and every object falls under gravity without any obstruction with equal acceleration which is equal to 10 m /s ² .

se the IUPAC nomenclature rules to give the name for this compound - CaS.

Answers

Answer:

Calcium sulphide

Explanation:

If we look at the compound, we will discover that it is an ionic compound. The compound is comprised of Ca^2+ and S^2-.

The cation Ca^2+ is the calcium ion while the anion S^2- is the sulphide ion hence the compound is rightly named calcium sulphide.

a cheetah has a speed of 100 km/h. if the cheetah runs for 5 hours, then what’s it’s speed ?

Answers

Answer:

Explanation:

idk

convert 0.0079 cm to mm

Answers

Answer: 0.079mm

Explanation:

Hope this helps^^

Explain Any Ten Forces Briefly.​

Answers

Answer:

--->

Explanation:

1. Air Resistance- this is a type of frictional force that acts upon objects as they travel through air. It usually opposes the motion of an object and it is mathematically difficult to predict its value.

2. Gravity- the force of gravity is the force that the earth, and moon use to attract an object towards itself. The moon has far less gravity than earth. All objects on earth experience a force of gravity that pulls them downward, towards the center of the earth.

3. Tension- the tension force is the force that is transmitted through a string, rope, cable or wire when it is pulled from opposite ends. The tension force is directed along the length of the wire and pulls equally on the objects on the opposite ends of the wire

4. Friction- this is the force exerted by a surface when an object moves across it. Friction results from the two surfaces being pressed together closely.

5. Electromagnetic force- although they don't seem similar, electricity and magnetism are related. Flowing electrons produce magnetism, and a moving magnet produces electricity.

6. Upthrust- this is the upward force that a liquid or gas exerts on a body floating in it.

7. Spring force- The spring force is the force exerted by a compressed  spring upon any object that is attached to it. This object is always acted upon by a force that restores the object to its rest or equilibrium position.

8. Applied force- An applied force is a force that is applied to an object by a person or another object.

9. Electrostatic force- The types of forces exerted by all electrically charged bodies on another charged bodies in the universe are ‘electrostatic forces’. They can be either positively or negatively charged.

10. Nuclear force- these are the forces that act between two or more nucleons. They bind protons and neutrons into atomic nuclei. The nuclear force is about 10 millions times stronger than the chemical binding that holds atoms together in molecules.

You are heating a substance in a test tube. Always point the open end of the tub

Answers

Away from all people? It’s safest

-I could be wrong but I am pretty sure since you wouldn’t point something dangerous towards others :/

Answer:

Away from all ppl

Explanation:

Assume each mark on the scale represented 1 g. Estimate how much a sheet of paper would mass. A sheet of paper is 28 cm by 21.7 cm.

Answers

Answer:

607.6g

Explanation:

Assume each mark on the scale represented 1 g. That is 1 cm = 1g

To estimate how much a sheet of paper would mass a sheet of paper is 28 cm by 21.7 cm, first calculate the area.

Area = 28 × 21.7 = 607.6 cm^2

Mass = 607.6 × 1g = 607.6 g

Therefore, the estimation will be 607.6g

32.What is the area under the curve between 0 seconds and 2 seconds?

33. At what timeſs) is the car not moving?

Answers

Explanation:

32. The area under the curve from t = 0 and t = 2 is the area of the triangle.  The base of the triangle is 2 seconds, and the height of the triangle is 2 m/s.  The area is therefore:

A = ½ bh

A = ½ (2 s) (2 m/s)

A = 2 m

33. The car is not moving when the velocity is 0 m/s.  This occurs at t = 0, t = 6, and t = 10.

Friends tell you that on a recent trip their average velocity was +20 m/s. Is it possible that at any time during their trip their velocity was -20 m/s? Explain, and give an example to justify your answer. PLEASE HELP

Answers

Answer: Yes. Please find the answer in the explanation.

Explanation:

Yes. Since velocity is a vector quantity, that is, it has both magnitude and direction.

If the displacements covered are not of the same direction, the velocity will not also of the same direction.

Take for instance, if the velocity in a positive is 40 m/s and velocity in the opposite direction is - 20 m/s . Then, the resultant velocity will be 40 - 20 = 20 m/s

Therefore,  it is possible that at any time during their trip their velocity was -20 m/s.

A capacitor of capacitance C has charge Q and stored energy is U if the charge is increased to 2Q then energy will be A)4U B)2U C)U/2 D)U/4

Answers

Answer:

2u

Explanation:

2u

W = Vq

q = CV

W = V.CV

W = CV²

W/C = V²

V = √(W/C)

√(W1/C1) = √(W2/C2)

√(u/c) = √(x/2c)

x = 2u

Tech A says that batteries should be charged as fast as possible. Tech B says that the ideal charging rate is the CCA divided by 70. Who is correct?

Answers

Answer:

Neither A nor B

Explanation:

The charge rate of a battery is the rate at which charge is added to the battery in a given time unit. The unit of charge rate is Coulombs/second or amps

The time to charge a battery, is given by  the battery charging formula which is given as follows;

Battery charging time, t = Battery Ah(Ampere hour)/(Charging current, A)

T = Ah/A

Where;

T = Time (Hours)

Ah = The rating of the battery in Ampere Hour

A = The Current applied given in Amperes

The charging current should 10% of the Ah battery rating, such that a 120 Ah battery requires about 12 Amperes charging current

However, due to losses in the system, the current can be set at 13A

the time for charging will then be t = 120/13 = 9.23 hours

How much time does a bike with an acceleration of 2ms-2 take to increase its velocity from 10ms-1 to 30ms-1?​

Answers

Answer:

[tex] \boxed{\sf Time \ taken = 10 \ seconds} [/tex]

Given:

Initial velocity (u) = 10 m/s

Final velocity (v) = 30 m/s

Acceleration (a) = 2 m/s²

To Find:

Time taken (t) by bike to increase its velocity from 10 m/s to 30 m/s with an acceleration of 2 m/s²

Explanation:

[tex]\sf From \ equation \ of \ motion:[/tex]

[tex] \boxed{ \bold{v = u + at}}[/tex]

Substituting values of v, u & a in the equation:

[tex] \sf \implies 30 = 10 + 2t[/tex]

Substract 10 from both sides:

[tex] \sf \implies 30 - 10 = (10 - 10) + 2t[/tex]

[tex] \sf \implies 20 = 2t[/tex]

20 = 2t is equivalent to 2t = 20:

[tex] \sf \implies 2t = 20[/tex]

Dividing both sides by 2:

[tex] \sf \implies \frac{ \cancel{2}t}{ \cancel{2}} = \frac{20}{2} [/tex]

[tex] \sf \implies t = \frac{10 \times \cancel{2}}{ \cancel{2}} [/tex]

[tex] \sf \implies t = 10 \: s[/tex]

So,

Time taken (t) by bike to increase its velocity from 10 m/s to 30 m/s with an acceleration of 2 m/s² = 10 seconds

What is the distance of 0m and jogs 300m east

Answers

Since we’re going east then, you should added double 300 so that makes your answer 600m.

which instrument is most easily used to measure the internal diameter of a pipe? a. manometer b. measuring cylinder c. micrometer d. vernier calipers

Answers

Answer:

vernier calipers....................

Answer:

d. vernier calipers

Explanation:

manometer is used for measuring pressure

measuring cylinder is for liquids

micrometer can only measure objects less than 2.5 cm (like a  thin wire)

so the answer is vernier calipers, they have a measuring range of 1-15 cm.

A ball is pushed down a hill so that it starts with a velocity of 2.0 m/s. It accelerates at a rate of 0.50 m/s2 for the length of the hill, 10.0 m. What is the velocity of the ball at the bottom of the hill?

Answers

Answer:

3.7 m/s

Explanation:

Given:

Δx = 10.0 m

v₀ = 2.0 m/s

a = 0.50 m/s²

Find: v

v² = v₀² + 2aΔx

v² = (2.0 m/s)² + 2 (0.50 m/s²) (10.0 m)

v = 3.7 m/s

A cross-country skier moves 32 meters westward, then 54
meters eastward, and finally 68 meters westward.Whats the magnitude.

Answers

Explanation:

It is given that, a cross-country skier moves 32 meters westward, then 54  meters eastward, and finally 68 meters westward.

The attached figure shows the whole scenario. He starts walking 32 m west and finally it walks 68 m west.

Let west is negative and east is positive.

Displacement = final position - initial position

= -68 - (-32)

= -36 m

The magnitude of displacement is equal to 30 m westwards.

Question 51 pts Which of the following illustrates an increase in potential energy? Group of answer choices a wind-up toy winding down an apple dropping from a tree a person climbs a set of stairs a firecracker explodes

Answers

Answer:

a person climbs a set of stairs

Explanation:

A person climbing a set of stairs increases his height, which also increases his gravitopotential energy. Gravitopotential energy increases with height as you move further away from the surface of the Earth.

A wind up toy winding down is already expending its stored up potential energy. An apple falling from a tree is already losing its gravitipotential energy. A firecracker that explodes is already using up the potential energy stored in its chemical. All these are cases where the potential energy is decreasing.

A car travels for an hour at a speed of 20 km/r, the next two hours at a speed of 65 km/r and the final hour at a speed of 85 km/r. What is the average speed of the car for the entire trip

Answers

Answer:

170km/hr

Explanation:

Vav=v1+v+v3.....

A car travels for an hour at a speed of 20 km/hour, the next two hours at a speed of 65 km/hour, and the final hour at a speed of 85 km/hour, then the average speed of the car in the entire trip would be  56.25 kilometers/hour.

What is speed?

The total distance covered by any object per unit of time is known as speed. It depends only on the magnitude of the moving object.

As given in the problem,if a car travels for an hour at a speed of 20 km/hour, the next two hours at a speed of 65 km/hour, and the final hour at a speed of 85 km/hour,

The total distance traveled by car =  20×1 + 65×2 +85×1

                                                        =225 kilometers

The total time taken by the car = 4  hours

The avearge speed of the car = 225/4

                                                    =56.25 kilometers/hour

Thus,the average speed of the car would be 56.25 kilometers/hour.

                     

To learn more about speed from here,refer to the link;

brainly.com/question/7359669

#SPJ2

A running back with a mass of 70 kg travels down the field with a velocity of 5.0 ms . Calculate the kinetic energy of the football player.

Answers

Kinetic energy=0.5*mass*(velocity²)=0.5*70*5*5=875 J


Recall the definition of a parsec.

Answers

Explanation:

One parsec is the distance to an object whose parallax angle is one arcsecond. The radius of the Earth's orbit equals one astronomical unit (AU), so an object that is one parsec distant is 206,265 AU (or 3.26 light-years) away

Answer:

Parsec is a unit of distance used in astronomy, equal to about 3.26 light years (3.086 × 10^13 kilometres). One parsec corresponds to the distance at which the mean radius of the earth's orbit subtends an angle of one second of arc.

Hope this helps!

which one is smaller a hectogram, dekagram, kilogram, centigram, or milligrams?

Answers

a kilogram is smaller
Other Questions
In a nutritious diet, the foods provide sufficient quantities of essential nutrients, fiber, and energy to maintain health and body weight. This principle of diet planning is called _____. Group of answer choices si la economa produce actualmente dos unidades de armas y cuatro unidades de mantequilla cul es el costo de oportunidad de aumentar la produccin de mantequilla de 4 unidades 11 unidades Can anyone help me? Please 73) Find the surface area. Don't forget yourlabel.8 cm10 cm18 cm8 cm __________ are broad statements describing where the organization wants to be in the future. }ons HelpLast edit was 1 hour agokgroundLayoutThemeTransition12356789Problem SolvingD A farmer watered 10/82 of a field. What decimal isequivalent to the fraction of the field the farmerwatered?type here how do you say Im doing good ? (in spanish ) The following reaction proceeds at a rate such that 3 mole of A is consumed per minute. Given this, how many moles of C are produced per minute? 2A+2B4C evaluate the expression O Output = Input + 2Output = 8 - InputO Output = 6 + InputO Output = 8. Inputhelp pls The tires of a car make 77 revolutions as the car reduces its speed uniformly from 92.0 km/h to 60.0 km/h. The tires have a diameter of 0.84 m.1. What was the angular acceleration of the tires?2. If the car continues to decelerate at this rate, how much more time is required for it to stop?3. If the car continues to decelerate at this rate, how far does it go? Find the total distance. What is a difference between Puerto Rico and the US? A) States in the US have electoral votes for the presidential election, but Puerto Rico does not. B) The US president is the leader of the US but not of Puerto Rico. C) English is spoken in the US but not in Puerto Rico. D) Puerto Rico was an important military outpost for Spain but had little military value when the US became involved in Puerto Rico. Select the correct answer.What was the earliest evidence of the significance of astronomy to prehistoric humans?OA. They used the stars as a means of navigation.OB. They based their religions, rituals, and celebrations around celestial bodies.OC. They were curious about the scientific explanation regarding celestial bodies.OD. They feared and worshipped celestial bodies.O E. They influenced the architecture of many civilizations. what is the valence electron of Molybdenum GIVING 25 POINTS! Copernicus introduced a new hypothesis for the movement of the solar system, which stated that the sun was the center of the solar system. This hypothesis was called the _____ . A. heliocentric theory B. geocentric theory C. transparent theory D. concentric theory Adams Manufacturing allocates overhead to production on the basis of direct labor costs. At the beginning of the year, Adams estimated total overhead of $363,800; materials of $404,000 and direct labor of $214,000. During the year Adams Incurred $386,400 in materials costs, $382 200 in overhead costs and $218,000 In direct labor costs. Compute the amount of under- or overapplied overhead for the year. A) $11600 overapplied. B) $18,400 overapplied. C) $11,600 underapplied D) $18,400 underapplied. E) $4.200 underapplied. how plastics are harmful for environment Convert the inequalities into equations, and then use the substitution method to find four possible vertices in the form (x, y, z). A ball is pushed down a hill so that it starts with a velocity of 2.0 m/s. It accelerates at a rate of 0.50 m/s2 for the length of the hill, 10.0 m. What is the velocity of the ball at the bottom of the hill? which one is smaller a hectogram, dekagram, kilogram, centigram, or milligrams?