Answer:
helium
The ionization energy decreases from top to bottom in groups, and increases from left to right across a period. Thus, helium has the largest first ionization energy, while francium has one of the lowest.
Complete and balance each of the following equations for acid-base reactions.
H3PO4(aq) + Sr(OH)2(aq) →
Explanation:
Sr(OH)2 + H3PO4 = Sr3(PO4)2 + H2O - Chemical Equation Balancer.
Answer:
3Sr(OH)2 + 2H3PO4 → Sr3(PO4)2 + 6H2O
Explanation:
please check the image for accurate answer
Group the elements into pairs that would most likely exhibit similar chemical properties. It does not matter which pair of elements is pair 1, pair 2, or pair 3, so long as the correct elements are paired. elements are N, As, Br, Mg, Sr, F
The elements in a group containing similar physical properties are
Pair 1 -- K and Li
Pair 2 -- S and Te
Pair 3 -- Br and F
Those elements which belong to the same group in the periodic table have similar number of valence electrons in the last shell and such elements exhibit similar properties.Potassium(K) and Lithium(Li) belong to a similar group i.e group 1.Sulfur (S) and Tellurium (Te) belong to a similar group i.e. group 16.Bromine(Br) and Flourine (F) belong to a similar group i.e. group 17Elements in a group exhibit similar periodic properties be it physical or chemical.It is in accordance with the periodic rules.To learn more periodic properties visit:
brainly.com/question/2396573
#SPJ1
A tree burns down and forms ashes
Physical or
Chemical
Answer:
It is a chemical change.
Explanation:
A tree burning down would be a chemical change because the composition of the tree is what changes, not just the physical characteristics.
what is the formula for sodium hydrogen phosphate
Answer: Na2HPO4
Explanation: this is the formula
Answer:
Na3PO4
Explanation:.
Suppose during volleyball practice, you drank 900 grams of water. If your body released 800 calories of energy into the water, what would be the temperature change of the water?
Answer:
75 degrees
Explanation:
how many protons electrons and nuetrons does as have
Problem PageQuestion Nitric acid and nitrogen monoxide react to form nitrogen dioxide and water, like this: (aq)(g)(g)(l) At a certain temperature, a chemist finds that a reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition: compound amount Calculate the value of the equilibrium constant for this reaction. Round your answer to significant digits. Clears your work. Undoes your last action. Provides information about entering answers.
Answer:
3.4
Explanation:
Nitric acid and nitrogen monoxide react to form nitrogen dioxide and water, like this: 2 HNO₃(aq) + NO(g) ⇄ 3 NO₂(g) + H₂O(l)
At a certain temperature, a chemist finds that a 9.5L reaction vessel containing a mixture of nitric acid, nitrogen monoxide, nitrogen dioxide, and water at equilibrium has the following composition:
compound amount
HNO₃ 15.5g
NO 16.6g
NO₂ 22.5g
H₂O 189.0g
Calculate the value of the equilibrium constant Kc for this reaction. Round your answer to 2 significant digits.
Step 1: Write the balanced equation.
2 HNO₃(aq) + NO(g) ⇄ 3 NO₂(g) + H₂O(l)
Step 2: Calculate the molar concentration of the species at equilibrium
We will use the following expression.
M = mass of solute / molar mass of solute × liters of solution
[HNO₃] = 15.5g / 63.01 g/mol × 9.5 L = 0.026 M
[NO] = 16.6g / 30.01 g/mol × 9.5 L = 0.058 M
[NO₂] = 22.5g / 46.01 g/mol × 9.5 L = 0.051 M
We do not calculate the molarity of water because it is a pure liquid and will not be included in the equilibrium constant.
Step 3: Calculate the equilibrium constant (Kc)
Kc = [NO₂]³/[HNO₃]²×[NO]
Kc = 0.051³/0.026²×0.058
Kc = 3.4
What is the main limitation of flame tests? Check all that apply.
1. It takes a long time to perform
2.Inability to determine the identity of mixtures
3.Some metals have similar flame test results
4.Color is subjective
Answer:
All of the above are correct.
Explanation:
The Flame Test Shortcomings
Small quantities of most molecules can not be measured by the examination.
The signal's intensity ranges from one test to the next.
The test findings are impaired by impurities or toxins.
The test is not capable of differentiating between all components.
Question 2
1 pts
Which compound would you predict to be most soluble in water and why: NH,Br or NHACI?
Assume Br is larger than CI.
O NH Br because the distance between the lons is shorter
O NH Br because the distance between the lons is longer
These are equally soluble because their lons have the same charge
O NH CI because the distance between the lons is longer
O NHACI because the distance between the lons is shorter
With regard to Lewis structures, what is the importance of the octet rule?A. Orbitals fill one electron at a time.
B. All elements contain eight electrons at all times.
C. Elements with less than eight valence electrons are reactive.
D. No more than two electrons can share an orbital.
Compare Solution X to Solution A, Solution B, and Solution C. Beaker with a zoom view showing eight shperes, four groups of particles each consisting of two differently colored spheres. Beaker with a zoom view showing four spheres of a single color Beaker with a zoom view showing eight spheres of a single color Beaker with a zoom view showing eight shperes, two groups of particles each consisting of four spheres, three of one color and one of a different color. Which of the solutions have the same molar concentration as Solution X? C
Answer:
SOLUTION A
Explanation:
Molarity is one of the most common measure of concentration
The correct option that gives the solution that has the same molar concentration as solution X is the option;
Solution A
Reason:
The descriptions of the content or each beaker are;
Content of beaker X = Eight spheres of four groups of two differently colored spheres
Content of beaker with solution A = Four spheres of a single color
Content of beaker with solution B = Eight spheres of a single color
Content of beaker with solution C = Eight spheres in two groups of four having three spheres of one color and one sphere of a different color
The concentration of a solution given by the molarity is defined as the number of moles per liter of the solution
A mole is a quantity of matter that contains 6.023 × 10²² elementary particles
Considering each group of spheres as representing one mole of a substance, we have;
Beaker with solution X contains, Four moles containing two elements each, per volume of the solution, such as HClBeaker with solution A contains, four moles of a single (one) element compound per volume of the solutionBeaker with solution B contains, eight moles of a compound having one element eachBeaker with solution C contains, two moles having four elements each, three of one type and one of another element, such as CH₃Therefore, the solution that has the same molar concentration, (the same number of moles per volume of the solution) is solution A
Learn more about molar concentration here:
https://brainly.com/question/16717948
In a chemistry laboratory, a student filled a 10.0 L container with two (2) different gases. The
gases are nitrogen gas taken from 24.0 L container at 2.00 atm and 12.0 L container of
oxygen at 2.00 atm. If the temperature of the gases is 273 K, calculate the partial pressure
of both gases in the resulting mixture and the total pressure.
Answer:
[tex]P_N=1.33atm\\\\P_O=0.67atm[/tex]
[tex]P_T=2.00 atm[/tex]
Explanation:
Hello.
In this case, the first step is to compute the moles of nitrogen and oxygen given their initial P, T and V conditions via the ideal gas equation:
[tex]n_{N}=\frac{P_{N}V_{N}}{RT} =\frac{2.00atm*24.0L}{0.082\frac{atm*L}{mol*K}*273K}\\ \\n_{N}=2.144molN\\\\n_{O}=\frac{P_{O}V_{O}}{RT} =\frac{2.00atm*12.0L}{0.082\frac{atm*L}{mol*K}*273K}\\ \\n_{O}=1.072molO[/tex]
After that, since the total volume now, once the mixture is formed is the addition between the initial volumes (12.0 L + 24.0 L) is 36.0 L, the partial pressure of each gas turns out:
[tex]P_N=\frac{2.144mol*0.082\frac{atm*L}{mol*K}*273K}{36.0L}\\\\P_N=1.33atm\\\\P_O=\frac{1.072mol*0.082\frac{atm*L}{mol*K}*273K}{36.0L}\\\\P_O=0.67atm[/tex]
Thus, the final total pressure is:
[tex]P_T= P_N+P_O=1.33atm+0.67atm\\\\P_T=2.00 atm[/tex]
Best regards.
ILL IBE BRAINLY Asian Tsunami 2004:
2. In decomposition, how are other parts of the ecosystem affected?
3. Under which type of change would more organisms be able to survive? Why?
4. What are some positive effects of a rapid change to an ecosystem?
5. What are some positive effects of a slow change to an ecosystem?
A student trying to determine if a liquid was a mixture or a pure substance made several following observations. Which observation would best support the conclusion that the liquid was a mixture?
Answer:
Distillation
Explanation:
By using the method of distillation we'll identify if there is other properties of liquid by looking the temperatures,the ordor or the boiling point.
How do you round 3795 to THREE sig figs?
Answer:
The answer is 380.
Explanation:
Significant figures:
All non-zero digits are consider significant figures like 1, 2, 3, 4, 5, 6, 7, 8, 9.
Leading zeros are not consider as a significant figures. e.g. 0.06 in this number only one significant figure present which is 6.
Zero between the non zero digits is consider significant like 108 consist of three significant figures.
The zeros at the right side e.g 6300 are also significant. There are four significant figures are present.
How to round the value to three significant figures.
First of all we will place the vertical line after 3rd digit.
379/5
Now we will look at the 4th digit. If it is five or more than five then one is added to 3rd digit. If it is less than five the 3rd digit remain same. In given value 4th digit is 5 thus one is added into 9 and the value become 380.
The answer is 380.
A container of hydrogen at 172 kPa was decreased to 85.0 kPa producing a new volume of 3L. What was the original volume?
Answer:
The answer is 1.48 LExplanation:
In order to find the original volume we use the same for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
where
P1 is the initial pressure
P2 is the final pressure
V1 is the initial volume
V2 is the final volume
Since we are finding the original volume
[tex]V_1 = \frac{P_2V_2}{P_1} \\[/tex]
From the question
P1 = 172 kPa = 172000 Pa
P2 = 85 kPa = 85000 Pa
V2 = 3 L
We have
[tex]V_1 = \frac{85000 \times 3}{172000} = \frac{255000}{172000} = \frac{255}{172} \\ = 1.482558139...[/tex]
We have the final answer as
1.48 LHope this helps you
Are strong acids more readily attracted to strong bases than to weak bases?
The isotopes K-37 and K-42 have the same
What is the mass number of neon (Ne)?
A. 20
B. 18
C. 10
D. 2
Answer:
A
Explanation:
it is round up to 20
Answer:
20 is the answer (A)
Explanation:
Neon/Atomic mass
20.1797 u
this is approximately 20 so 20 is the answer (A)
hope this helps!
write 0.006 in exponential form
[tex]\huge\pink{Answer}[/tex]
0.0006 in scientific notation is 6 × 10-4
Step by step Explanation:All numbers in scientific notation or standard form are written in the form
m × 10n, where m is a number between 1 and 10 ( 1 ≤ |m| < 10 ) and the exponent n is a positive or negative integer.
To convert 0.0006 into scientific notation, follow these steps:
Move the decimal 4 times to right in the number so that the resulting number, m = 6, is greater than or equal to 1 but less than 10
Since we moved the decimal to the right the exponent n is negative
n = -4
Write in the scientific notation form m × 10n
= 6 × 10-4
Therefore,
6 × 10-4 is the scientific notation form of 0.0006 number and 6e-4 is the scientific e-notation form for 0.0006
HOPE IT HELPS ☺️The abiotic factor is primary source of energy for all organisms.
Answer:
True, abiotic factors are the primary resources.
Answer: The abiotic factor sunlight is the primary source of energy for living organisms.
Explanation: edmentum/plato
Test (Speed, Velocity and Acceleration)
A dog can run as fast as 15 miles per hour for a short distance. If a dog ran at this speed 0.10 of an hour, how far would it run?
Answer:
1.5 miles
Explanation:
Given that,
Speed of dog, v = 15 mph
Time taken by the dog, t = 0.1 h
We need to find the distance travelled by the dog. We know that, distance is the product of speed and time. So,
d=vt
[tex]d=15\times 0.1\\\\d=1.5\ \text{miles}[/tex]
Hence, the dog will cover a distance of 1.5 miles.
Ammonium cyanate (NH4CNO) reacts to form urea (NH2CONH2). at 65 degrees celsius, the rate constant, K is 3.60 L mol^-1 s^-1. what is the rate law for this reaction
Answer:
v = 3.60Lmol⁻¹s⁻¹ [NH₄CNO]²
Explanation:
The reaction at 65°C of ammonium cyanate to produce urea is:
NH₄CNO → NH₂CONH₂
The general rate law is:
v = K [NH₄CNO]ˣ
Where v is rate of the reaction, K is rate constant and x represents the order of reaction
Based on the units of the rate constant (Lmol⁻¹s⁻¹ = M⁻¹s⁻¹) the reaction must be order 2 and the rate law:
v = K [NH₄CNO]²
v = 3.60Lmol⁻¹s⁻¹ [NH₄CNO]²
The net ionic equation for the reaction between aqueous nitric acid and aqueous sodium hydroxide is ________. The net ionic equation for the reaction between aqueous nitric acid and aqueous sodium hydroxide is ________. H+ (aq) + Na+ (aq) + OH- (aq) → H2O (l) + Na+ (aq) HNO3 (aq) + OH- (aq) → NO3- (aq) + H2O (l) H+ (aq) + HNO3 (aq) + 2OH- (aq) → 2H2O (l) + NO3- (aq) H+ (aq) + OH- (aq) → H2O (l) HNO3 (aq) + NaOH (aq) → NaNO3 (aq) + H2O (l)
Answer:
H+ (aq) + OH- (aq) → H2O (l)
Explanation:
The net ionic equation is the main reaction going on in the system. The reaction between nitric acid and sodium hydroxide is a neutralization reaction.
In a neutralization reaction, the main reaction is the combination of hydrogen ions and hydroxide ions to form water. This reaction has been shown in the answer box.
what is it called when you apply science and mathematics to real life problems
Answer:
I think S.T.E.M but i'm not 100% sure
Explanation:
9.81g of manganese(iv) oxide react with 6.54 g of aluminum to make 5.65g of aluminum oxide and an unknown mass of manganese determine the limiting reagent theorectical yield and percent yielf
Answer:
MnO₂ is limiting reactant
7.68g is theoretical yield
73.6% is percent yield
Explanation:
The reaction of the question is:
3MnO₂ + 4Al → 2Al₂O₃ + 3Mn
To determine limiting reactant we need to convert each reactant to moles and, based on the chemical equation determine the moles you need of the other reactant for a complete reaction:
Moles MnO₂ -Molar mass: 86.937g/mol-:
9.81g * (1mol / 86.937g) = 0.113 moles
Moles Al -Molar mass: 26.98g/mol-:
6.54g * (1mol / 26.98g) = 0.242 moles
For a complete reaction of 0.242 moles of Aluminium you will require:
0.242mol Al * (3MnO₂ / 4Al) = 0.182 moles of MnO₂
As there are just 0.113moles of MnO₂, MnO₂ is limiting reactant
Now, with limiting reactant we need to determine theoretical moles and grams of Al₂O₃ produced:
Moles:
0.113 moles MnO₂ * (2Al₂O₃ / 3MnO₂) = 0.0753 moles Al₂O₃
Grams (Molar mass: 101.96g/mol):
0.0753 moles Al₂O₃ * (101.96g/mol) = 7.68g is theoretical yield
Percent yield is 100 times the ratio between actual yield (5.65g) and theoretical yield:
5.65g/7.68g * 100 =
73.6%How does a scientist make two solutions with the same molarity? A By dissolving the maximum amount of each substance in the B. By dissolving the same number of grams of each substance in the OC. By dissolving 1 mole of each substance in enough water to make same volume of water same volume of water sure dissolving is complete By dissolving the same number of nmoles of each substance in the same volume of water OD.
Answer: The answer is “ By dissolving the same number of nmoles of each substance in the same volume of water ”
Explanation:
By dissolving the same number of moles of each substance in the same volume of water. Hence, option D is correct.
Define the molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution.
Adding water to a solution and the number of moles of the solvent stay the same while the volume increases.
If there is no flow of solute into or out of the volume during the addition of the solvent, the number of moles of solute remains the same.
Hence, option D is correct.
Learn more about moles here:
brainly.com/question/8455949
#SPJ2
Which graph represents a function?
Answer:
I need to se the options
1. 500 grams of sugar occupies a volume of 315 ml. What is the density of the sugar in g/mL? Show
your work.
Answer:
The answer is 1.59 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 500 g
volume = 315 mL
We have
[tex]density = \frac{500}{315} = \frac{100}{63} \\ = 1.587301...[/tex]
We have the final answer as
1.59 g/mLHope this helps you
Which carries information by copying an original sound?
Answer:
frequency
Explanation:
i just did it
Answer:
A: analog signal
Explanation:
on edge2021!