When you stand on tiptoes on a bathroom scale, there is an increase in

A) weight reading.
B) pressure on the scale, not registered as weight.
C) both weight and pressure on the scale.
D) none of the above

Answer:

W/7

Explanation:

By principle of moments,

Sum of clockwise moment = sum of anticlockwise moment

Weight × 7d = W × d

Weight = W/7

Since the two children are in rotational equilibrium, the weight of the second child is W/7.

The weight of the second child can be determined from the principle of moments.

The principle of moments states that for a body in equilibrium, the sum of the clockwise moments and anticlockwise moments about a point is zero.

Let the weight of the second child be X

From the principle of moments:

W × d = 7×d × X

X = W/7

Therefore, the weight of the second child is W/7.

Learn more about principle of moments at: https://brainly.com/question/20298772

Answer:

A) nm, um, mm, cm

B) 1mm, 1cm, 1m, 1km

A) 3500g, B) 2500m, C) 7200 seconds

Answer:

Due to the applied filed the electrons move in a particular direction.

Explanation:

Initially when the switch is off, the free electrons move here and there in any random directions in the conductor with the random speeds called thermal velocity.  So, tat the net flow is almost zero.

When the battery is connected is switch is ON, the random motion of the electrons aligned in a particular direction due to the force applied by the electric filed, so the net flow is not zero it increases and thus the current flow.

Answer:

elative magnitude of the two forces is the same and they are applied in a constant direction.

Explanation:

Newton's second law states that the sum of the forces is equal to the mass times the acceleration  

              ∑ F = m a

in this case there are two forces on the x axis

             F_applied - fr = 0

since they indicate that the velocity is constant, consequently

             F_applied = fr

the relative magnitude of the two forces is the same and they are applied in a constant direction.

Answer:

Following are the solution to the given question:

Explanation:

Please find the complete question in the attached file.

The cost after 30 days is 60 dollars. As energy remains constant, the cost per hour over 30 days will be decreased.

[tex]\to \frac{\$60}{\frac{30 \ days}{24\ hours}} = \$0.08 / kwh.[/tex]

Thus, [tex]\frac{\$0.08}{\$0.12} = 0.694 \ kW \times 0.694 \ kW \times 1000 = 694 \ W.[/tex]

The electricity used is continuously 694W over 30 days.

If just resistor loads (no reagents) were assumed,

[tex]\to I = \frac{P}{V}= \frac{694\ W}{120\ V} = 5.78\ A[/tex]

Energy usage reduction percentage = [tex](\frac{60\ W}{694\ W} \times 100\%)[/tex]

This bulb accounts for [tex]8.64\%[/tex] of the energy used, hence it saves when you switch it off.

Answer:

The mass of each object is 2kg and 3 kg.

Explanation:

Given that,

Gravitational force,[tex]F=1\times 10^{-8}\ N[/tex]

The distance between masses, d = 20 cm = 0.2 m

The total mass of the two objects, M + m = 5 kg

M = 5-m

The formula for the gravitational force is :

[tex]F=G\dfrac{Mm}{d^2}\\\\1\times 10^{-8}=6.67\times 10^{-11}\times \dfrac{(5-m)m}{(0.2)^2}\\\\\frac{1\times10^{-8}}{6.67\times10^{-11}}=\frac{(5-x)x}{(0.2)^{2}}\\\\\frac{1\times10^{-8}}{6.67\times10^{-11}}\cdot(0.2)^{2}\\\\5.99=(5-x)x\\\\x=2\ kg\ and\ 3 \ kg[/tex]

So, the mass of each object is 2kg and 3 kg.

Answer:

yes sir

Explanation:

Answer:

A) q = 1.67 × 10^(-7) C

B) q = 1.67 × 10^(-10) C

Explanation:

We are given;

Potential; V = 30 KV = 30000 V

Radius of sphere; r = diameter/2 = 0.1/2 = 0.05 m

A) To find the charge of the sphere, we will use the formula;

V = kq/r

Where;

q is the charge

k is electric force constant = 9 × 10^(9) N.m²/C²

Thus;

q = Vr/k

q = (30000 × 0.05)/(9 × 10^(9))

q = 1.67 × 10^(-7) C

B) Now, potential energy here is a formula; U = qV

However, for the drop of paint to move, the potential energy will be equal to the kinetic energy. Thus;

qV = ½mv²

q = mv²/2V

Where;

v is speed = 10 m/s

V = 30000 V

m = mass = 0.100 mg = 0.1 × 10^(-6) Thus;

q = (0.1 × 10^(-6) × 10²)/(2 × 30000)

q = 1.67 × 10^(-10) C

Answer:b

Explanation:

Answer:

the rock speed is increased

A rock is initially at rest concerning the earth, but the speed of the rock will increase when it hits the ground.

The resistance to something rolling or moving over another solid object is called friction. Even though frictional forces can be helpful, like the traction needed to walk without slipping, they also present a considerable amount of resistance to motion. About 20% of the engine power in a car is used to combat frictional forces in the moving parts.

The primary cause of friction between metals appears to be the forces of attraction, also known as adhesion, between the contact zones of the surfaces, which are always microscopically unequal. Because of friction caused by the imperfections of the tougher surface rubbing up against the softer surface, these "welded" connections are sheared.

To know more about Friction :

https://brainly.com/question/13000653

#SPJ2

Relative density is the ratio of the density of a substance to the density of a given material.

Answer:

Jupiter

Explanation:

Answer:

The answer is Jupiter.

Explanation:

Jupiter is an orange/yellow colored planet.

[tex]E_0=1.5033×10^{-10}\:\text{J}[/tex]

Explanation:

The rest energy [tex]E_0[/tex] of a proton of mass [tex]m_p[/tex] is given by

[tex]E_0 = m_pc^2[/tex]

[tex]\:\:\:\:\:\:\:=(1.6726×10^{-27}\:\text{kg})(2.9979×10^8\:\text{m/s})^2[/tex]

[tex]\:\:\:\:\:\:\:=1.5033×10^{-10}\:\text{J}[/tex]

Answer:

because the mass of the apple is very less compared to the mass of earth. Due to less mass the apple cannot produce noticable acceleration in the earth but the earth which has more mass produces noticable acceleration in the apple. thus we can see apple falling on towards the earth but we cannot see earth moving towards the apple.

Answer:

False

Explanation:

You have a circle so think back to circular motion. Theres 2 directions, centripetal and tangential. The problem tells you there's a constant tangential speed so tangential acceleration is 0. However there is a centripetal acceleration acting on the ball that holds it in its circular motion (i.e. tension, or gravity). Since centripetal is perpendicular to the tangential direction, acceleration and velocity are in different directions.

Answer:

0.5 V

Explanation:

The electric potential distance between different locations in an electric field area is unaffected by the charge that is transferred between them. It is solely dependent on the distance. Thus, for two electrons pushed together at the same distance into the same field, the electric potential will remain at 1 V. However, the electric potential of one of the two electrons will be half the value of the electric potential for the two electrons.

Answer:

[tex]\lambda=550nm[/tex]

Explanation:

From the question we are told that:

The slit spacing [tex]d_s=0.120mm=>0.120*10^{-3}[/tex]

Screen distance [tex]d_{sc}=2.0m[/tex]

Third Distance  [tex]X=2.75cm=>2.75*10^{-2}[/tex]

Generally the equation for Wavelength is mathematically given by

[tex]\lambda=\frac{Xd_s}{n*d_{sc}}[/tex]

Where

n=number of screens

[tex]n=3[/tex]

Therefore

[tex]\lambda=\frac{2.75*10^{-2}*0.120*10^{-3}}{3*2}[/tex]

[tex]\lambda=0.055*10^{-5}[/tex]

[tex]\lambda=550nm[/tex]

Answer:

Yes, when an apple falls towards the earth, the apple gets accelerated and comes down due to the gravitational force of attraction used by the earth. The apple also exerts an equal and opposite force on the earth but the earth does not move because the mass of the apple is very small, due to which the gravitational force produces a large acceleration in it (a = F/m) but the mass of the earth is very large, the same gravitational force produces very small acceleration in the earth and we don't see the earth rising towards the apple.

Answer:

Explanation:

Speed= distance/time

Or time = distance/speed

According to your question

Speed=15m/s

and. Distance=1.2km. ,we must change kilometer in meter because given speed is in m/s

D= 1.2km = 1.2×1000m =1200meter

Time = distance/ speed

1200/15 =80second

Or. 1min and 20 sec will be your answer.

Answer:

Look at work

Explanation:

a) I am not sure if you want tangential or centripetal but I will give both

Centripetal acceleration = r*α

Since ω is constant, α is 0 so centripetal acceleration is 0m/s^2

Tangential acceleration = ω^2*r

convert 200rev/min into rev/s

200/60= 10/3 rev/s

a= 100/9*1.2= 120/9= 40/3 m/s^2

b) Rotational Kinetic Energy = 1/2Iω^2

I= mr^2

Plug in givens

I= 43.2kgm^2

K= 1/2*43.2*100/9=2160/9=240J

Answer:

Units. Torque has the dimension of force times distance, symbolically T−2L2M. Although those fundamental dimensions are the same as that for energy or work, official SI literature suggests using the unit newton metre (N⋅m) and never the joule. The unit newton metre is properly denoted N⋅m.

Dimension: M L2T−2

In SI base units: kg⋅m2⋅s−2

Other units: pound-force-feet, lbf⋅inch, ozf⋅in

Answer:

hope it is helpful to you

☆☆☆☆☆☆☆☆☆☆☆

The acceleration will increase by 61.3%.

Explanation:

The centripetal acceleration [tex]a_c[/tex] is given by

[tex]a_c = \dfrac{v^2}{r}[/tex]

If the velocity of the object increases by 27.0%, then its new velocity v' becomes

[tex]v' = 1.270v[/tex]

The new centripetal acceleration [tex]a'_c[/tex] becomes

[tex]a'_c = \dfrac{(1.270v)^2}{r} = 1.613 \left(\dfrac{v^2}{r} \right)[/tex]

[tex]\:\:\:\:\:\:\:\:\:= 1.613a_c[/tex]

Answer:

95.0 colomb

Explanation:

Make sure to understand the concept

Answer:

The speed of the car, v = 21.69 m/s

Explanation:

The diameter is  = 48.01 m

Therefore, the radius of the loop R = 24.005 m

Weight at the top is n = mv^2/R - mg

Since the apparent weight is equal to the real weight.

So, mv^2/R - mg = mg

v = √(2Rg)

v = √[2(24.005 m)(9.8 m/s^2)]

The speed of the car, v = 21.69 m/s

Answer:

The speed is 15.34 m/s.

Explanation:

Diameter, d = 48.01 m

Radius, R = 24.005 m

Let the speed is v and the mass is m.

Here, the weight of the car is balanced by the centripetal force.

According to the question

[tex]m g = \frac{mv^2}{R}\\\\v =\sqrt{24.005\times9.8}\\\\v = 15.34 m/s[/tex]

Answer:

answer is 18.58 because

Answer:

My answer is d.25.1 because

Let the point where A is launched act as the origin, so that the horizontal positions at time t of the respective projectiles are

• A : x = (19.5 m/s) cos(30°) t

• B : x = 62.2 m + (19.5 m/s) cos(60°) t

These positions are the same at the moment one projectile is directly above the other, which happens for time t such that

(19.5 m/s) cos(30°) t = 62.2 m + (19.5 m/s) cos(60°) t

Solve for t :

(19.5 m/s) (cos(30°) - cos(60°)) t = 62.2 m

t = (62.2 m) / ((19.5 m/s) (cos(30°) - cos(60°))

t ≈ 8.71 s

Answer:

The voltage across 150 ohm resistor is 6 volts.

Explanation:

Given that,

Resistors having resistances 150 ohms and 300 ohms are in series. Their equivalent is :

R = 150 + 300

R = 450 ohms

Let I is the current in the circuit. Using Ohm's law,

V = IR

[tex]I=\dfrac{V}{R}\\\\I=\dfrac{18}{450}\\\\I=0.04\ A[/tex]

The current in series remains the same while potential divides. So,

[tex]V_1=IR_1\\\\V_1=0.04\times 150\\\\=6\ V[/tex]

So, the voltage across 150 ohm resistor is 6 volts.

Answer:

a. True

Explanation:

A semiconductor can be defined as a crystalline solid substance that has its conductivity lying between that of a metal and an insulator, due to the effects of temperature or an addition of an impurity. Semiconductors are classified into two main categories;

1. Extrinsic semiconductor.

2. Intrinsic semiconductor.

An intrinsic semiconductor is a crystalline solid substance that is in its purest form and having no impurities added to it. Examples of intrinsic semiconductor are Germanium and Silicon.

Basically, the number of free electrons in an intrinsic semiconductor is equal to the number of holes. Also, the number of holes and free electrons in an intrinsic semiconductor is directly proportional to the temperature; as the temperature increases, the number of holes and free electrons increases and vice-versa.

In an intrinsic semiconductor, each free electrons (valence electrons) produces a covalent bond.

Generally, a process referred to as doping can be used to increase the conductivity of an intrinsic semiconductor such as silicon or germanium, by adding small amounts of impurities found in group 3A or group 5A elements.

Solids cannot diffuse.