When you climb stairs, you expend energy to do work against gravity. The energy you use to climb will convert into an equal amount of gravitational potential energy, so Suppose a 65 kg man uses 10 s to climb a staircase up to a height of 6 m How much power does he use, and how does this power compare to the power used by your highest-consuming device?

Speed of a man at the base of the hill is 93.27m/sec  if a man skies down from the top of hill 1450m high.

In actual sciences, mechanical energy is the amount of possible energy and motor energy. The rule of preservation of mechanical energy expresses that in the event that a disengaged framework is subject just to moderate powers, the mechanical energy is consistent. In the event that an item moves the other way of a moderate net power, the potential energy will increment; and if the speed (not the speed) of the item changes, the dynamic energy of the item likewise changes.

In every single genuine framework, nonetheless, non-conservative powers, for example, frictional powers, will be available, however in the event that they are of irrelevant greatness, the mechanical energy changes nearly nothing and its protection is a valuable estimation. In flexible crashes, the active energy is moderated, yet in inelastic impacts some mechanical energy might be changed over into nuclear power. The comparability between lost mechanical energy and an expansion in temperature was found by James Prescott Joule.

At 1450m height,mechanical energy is equal to potential energy. Potential energy is all due to position of man.

Potential energy=mgh where m is the mass and g is the acceleration due to gravity and h is the height.

So,potential energy=m×10×1450Joules.

Now,when he starts from rest and losses 70% of energy in friction,it means 30% mechanical energy will convert into kinetic energy.

So,30% of mechanical energy=kinetic energy of man.

=>(30/100) ×m×10×1450=(1/2)×m×v²

=>3×1450×2=v²

=>v²=8700

=>v=√8700

=>v=93.27m/sec.

Hence,speed of man at base is 93.27m/sec.

To know more about mechanical energy,visit here:

https://brainly.com/question/22371364

#SPJ4

The total charge to conserved that is Q=-6C,Now the sum of the total charges on both the pieces should be Q=Q1+Q2 = -6C,given that one charge is Q1 =2C,  there fore -6 =2+Q2, There fore the charge on other piece is Q2 = -6-2 = -8C.

In accordance with the principle of charge quantization, the total charge on an object must be an integer multiple of the basic charge, which is the fee on an electron (e).Not an integer, this.Thus, a body charged at 2.810-18 C is not possible.

If there are greater proton than electrons, the charge density of the thing is positive.If an object has more electrons than protons, it has a negative net charge.If there are an equal number of protons and electrons, the thing is neutral.

To know more bout charges visit:

https://brainly.com/question/23484909

#SPJ4

Answer:

OPTION C is correct.

Explanation:

A circuit composed solely of components connected in series is known as a series circuit; likewise, one connected completely in parallel is known as a parallel circuit.

The tension in the rope is equal to the weight of the woman, which is 120 lb. Since the woman is not accelerating, the forces acting on her must be balanced, meaning the tension in the rope must equal her weight. Therefore, the tension in the rope is 120 lb.

What is tension?

Tension is a state of mental or emotional strain, resulting from opposing forces or influences. It is a feeling of inner strain caused by a clash of emotions, ideas, or beliefs. It can also result from physical causes such as a lack of sleep, worry, physical exertion, and even hunger.

Tension can manifest itself in physical symptoms such as headaches, neck pain, muscle tightness, and fatigue. It can also lead to emotional problems such as anxiety, irritability, and depression. It is important to recognize and address tension in order to maintain good mental and physical health.

To learn more about tension

brainly.com/question/2008782

#SPJ4

Steam is produced when the cooling agent is heated by nuclear fusion. Turbines, or wheels turned by a flowing current, are rotated by the steam. The generators, which are engines that produce power, are driven by the turbines. Above process is followed in a nuclear power station to generate electrical energy.

Electrical energy is the energy that emerges from the kinetic or potential energy of charged particles. It is referred to be energy that has undergone transformation from overall electric potential energy.

Electrical energy can be described as the result of electrons travelling between two points. The movement of charged particles along or through a medium is known as electricity or current (like a wire).

The basic unit of electrical energy is the joule, also referred to as a watt-second. One joule of electrical energy is produced when one amp of current flows through a circuit for one second while a potential difference of one volt is applied across it.

Learn more about nuclear fusion

https://brainly.com/question/12701636

Answer:

The orbit of the earth about the sun is very slightly elliptical

(about 91.5 to 93.5) million miles

Object whose position throughout time is represented by a graph Which point in position 6 has the highest speed

A body and object's velocity determines the direction of its motion. Speed is fundamentally a scalar quantity. It is a vector term in its purest form. It refers to the rate at which distance varies.

Any object's velocity is a measurement of how swiftly it moves. Therefore, it can be described as the shift in an object's position divided by time. Both a magnitude (a number) and a direction are associated with velocity. Meters a second (meter/second) is the unit used to measure velocity.

To know more about speed visit:

brainly.com/question/18084516

#SPJ4

In Plato's philosophy, Socrates believed that he should follow the laws of the state of Athens because he believed in the idea of the "philosopher-king."

Who was Socrates?

Socrates was a classical Greek philosopher, credited as one of the founders of Western philosophy. He is best known for his method of inquiry, called the Socratic method, and for his teaching style, which was dialogic and aimed at getting students to think critically and develop their own ideas.

According to Socrates, the laws of the state were a reflection of the absolute and unchanging moral values that exist in the world. He believed that as a philosopher, it was his duty to live in accordance with these moral values, and thus to follow the laws of the state. In this way, Socrates saw himself as a servant of the divine, and believed that by following the laws, he was serving the greater good and promoting the welfare of the city.

Hence, In Plato's philosophy, Socrates believed that he should follow the laws of the state of Athens because he believed in the idea of the "philosopher-king."

To learn more about Socrates:

https://brainly.com/question/334635

#SPJ4

Physical properties of a mineral is mainly due to the atomic structure as well as the crystalline structure of the mineral. Each mineral will have its own characteristic crystalline structure.

The important physical properties are color, crystal form, hardness, cleavage, density and  specific gravity. All these properties are based on the arrangement of atoms. It atoms are tightly packed harder will be the mineral, greater the density.

The location of atoms or ions in the crystalline structure determines the cleavage. It happens through the line where the bonds are weakest.  The more the space between the atoms, less the density and specific gravity.

So all these physical properties are imparted due to the atomic structure and arrangement of atoms in its crystal.

For more information regarding the Physical properties of minerals, kindly refer

https://brainly.com/question/17180923

#SPJ4

100N of horizontal force is required to hold a 3kg book vertically against the wall to prevent it from falling if the coefficient of static friction between the book and the wall is 0.3.

What is friction?

Friction=μN, where N is the normal force.

N = friction/μ.

N = mg/μ

m = 3 kg

g = 10m/s²

μ = 0.3

N = mg/μ

N = 300/3

= 100N

To know more about friction, click the link given below:

https://brainly.com/question/13000653

#SPJ4

The energy difference between the staggered and eclipsed populations of ethane depends on various factors such as bond length, bond angle, and bond energy.

In general, the energy difference between these two populations is proportional to the difference in their molecular structure.]

If the difference in molecular structure between the staggered and eclipsed populations of ethane had only been 30-fold instead of the almost three orders of magnitude, it would result in a proportionally smaller energy difference between them. However, without more specific information about the specific molecular structure and bond energies involved, it is not possible to determine the exact energy difference.

In general, it's important to note that the magnitude of the energy difference between the staggered and eclipsed populations of ethane can be influenced by various factors such as temperature, pressure, and the presence of other molecules. These factors can affect the magnitude of the energy difference and make it difficult to determine an exact value.

Learn more about bond energy here

https://brainly.com/question/26141360

#SPJ4

The amount of potential energy that converted into thermal energy is  468 kJ.

Energy, which is observable in the execution of labor as well as in the form of heat and light, is the quantitative quality that is transferred to a body or to a physical system in physics.

Energy is a preserved resource, energy can only be transformed from one form to another and cannot be created or destroyed.

Hence, form conservation of energy;

the amount of potential energy that converted into thermal energy =

Initial potential energy - final kinetic energy

= 1500 × 9.8 × 135  - 1/2×1500×45²

=  465750 Joule

= 468 kJ

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

Answer:

The momentum of the steel ball is 0.28 kg m/sec.

Explanation:

The momentum of an object can be calculated using the formula: momentum = mass x velocity. In this case, the mass of the steel ball is 100 g, which is equivalent to 0.1 kg. The velocity of the ball is 2.8 m/sec. Plugging in the values into the formula, we get:

momentum = 0.1 kg x 2.8 m/sec

momentum = 0.28 kg m/sec

So the momentum of the steel ball is 0.28 kg m/sec.

The sine refraction of the two angles, or sin(c, red) - sin(c, green), is equal to the difference between the critical angles for red and green light.

The critical angle is the angle of incidence (angle between the incoming light and the surface normal) where no more refraction takes place and the refracted ray is just skimming the surface. Beyond this angle, the light won't enter the second medium and will instead begin to reflect back into the first.

Flint glass has red and violet light refractive indices of 1.613 and 1.632, respectively. The refractive indices of the materials define the critical angle.

To know more about refraction visit:-

https://brainly.com/question/14760207

#SPJ4

Answer:

Below

Explanation:

All of the Kinetic energy ( 1/2 mv^2) will be converted to Gravitational Potential Energy ( mgh)  ....so

1/2 m v^2   = mgh     divide both sides of the equation by 'm'

1/2 v^2 = gh                ( not that the mass of the jumper is irrelevant !)

(1/2 v^2 ) /g  = h

(1/2) (9.8 m/s)^2  / (9.8 m/s^2 ) =   4.9 m

Because we already know that this function is exponential, that sort of function that describes the amplitude of damped oscillatory motion is exponential. [tex]y=A\times e^{\frac{-b}{2m} }[/tex][tex]\times cos\omega t[/tex]    

The maximum displacement or distance a point on a vibrating body or wave can move in relation to its equilibrium location is referred to as the amplitude in physics. It is equivalent to the half-length of the vibration path. The bob swings halfway across the pendulum's amplitude when it shifts from one side to the other. Waves are produced by vibrating sources, and the amplitude of the waves is inversely proportional to the amplitude of the source. The largest deviation of any point on a transverse wave, such as the wave on a plucked string, from its position when the wave is at rest, is used to determine the wave's amplitude.

[tex]y=A\times e^{\frac{-b}{2m} }[/tex][tex]\times cos\omega t[/tex]    [tex]\rightarrow(1)[/tex]

here function is [tex]A\times e^{\frac{-b}{2m} }[/tex]    is amplitude

as per equation ( 1 ) it is exponential

Learn more about amplitude

brainly.com/question/8662436

#SPJ4

The heat capacity has to do with the amount of heat that can be added to cause a temperature change.

The question is incomplete but I will give you an overview of the experiment determination of the heat capacity.

The heat capacity can be experimentally determined using the method of calorimetry. This involves measuring the change in temperature of a substance as heat is added to it or taken away from it. By knowing the heat added or removed and the resulting change in temperature, the heat capacity of the substance can be calculated using the equation:

C = ΔQ / ΔT

where C is the heat capacity, ΔQ is the amount of heat added or removed, and ΔT is the resulting change in temperature.

Learn more about heat capacity:https://brainly.com/question/28302909

#SPJ1

a) The heat energy transferred to the outside air is 6.04 × 10^4 J.

b) The net change in the internal energy of the refrigerant is 1.51 × 10^4 J.

c) amount of work done inside is -1.51 × 10^4 J.

d) The net change in the internal energy is 9.06 × 10^4 J

a. The amount of energy transferred as heat to the outside air is the difference between the amount of heat removed from the air inside the refrigerator and the work done on the refrigerant: 7.55 × 10^4 J - 1.51 × 10^4 J = 6.04 × 10^4 J.

b. The net change in the internal energy of the refrigerant is the work done on the refrigerant: 1.51 × 10^4 J.

c. The amount of work done on the air inside the refrigerator is negative of the work done on the refrigerant, as energy is transferred from the air to the refrigerant: -1.51 × 10^4 J.

d. The net change in the internal energy of the air inside the refrigerator is the heat removed from the air minus the work done on the air: 7.55 × 10^4 J - (-1.51 × 10^4 J) = 9.06 × 10^4 J.

Learn more on heat energy here https://brainly.com/question/934320

#SPJ1

A refracting and reflecting telescope have the same diameter; the refracting telescope will be much longer than the reflector'

The answer choice is true.

Because refracting and reflecting telescopes are designed differently, they can have different lengths even though they have the same diameter. Refracting telescopes, commonly known as refractors, bend and concentrate light to create images. The length of a refractor is mostly dictated by the size of its objective lens, which is the primary light-gathering lens at the front of the telescope. A bigger lens necessitates a longer tube in order to accommodate it, resulting in a greater overall length of the telescope.

Reflecting telescopes, also known as reflectors, on the other hand, employ mirrors to gather and focus light. The length of a reflector telescope is dictated by the size of its primary mirror. A longer optical tube is required to accommodate a larger mirror, but it does not have to be as long as a refractor of the same diameter because the light from the mirror travels a shorter distance before reaching the eyepiece.

Even if a refractor and a reflector have the same diameter, the refractor will be considerably longer due to the length necessary to accommodate its huge lens, but the reflector will have a lower overall length since the light it gathers travels a shorter journey.

For more such questions on Reflection, click on:

https://brainly.com/question/26655381

#SPJ4

Equation describes the connection between a mass-spring system's input force and output velocity, m(d^2x/dt^2) + b(dx/dt) + kx = f(t).

The relationship between the input force and the output velocity of a mass-spring system is given by the equation m(d^2x/dt^2) + b(dx/dt) + kx = f(t), where m is the mass of the object, b is the damping coefficient, k is the spring constant, x is the displacement of the mass from its equilibrium position, and f(t) is the input force as a function of time.

Thus, the relationship between the input force and the output velocity is mediated by the mass, spring constant, damping coefficient, and displacement of the system.

To know more about the spring, here

brainly.com/question/12975035

#SPJ4

The following equations provide the maximum speed at which an automobile may travel in a circular turn without skidding, (* g * r) = v max As a result, the car can travel at a maximum speed of about 3.23 m/s before skidding during the turn.

A car is a vehicle made specifically to move people and cargo over roads. Although electric and hybrid models have increased in popularity recently, internal combustion engines that use fossil fuels still provide the majority of the power for cars. The steering system, engine, gearbox, suspension, and brakes are a few of the crucial parts of a car. Modern vehicles frequently include a number of extra conveniences, such power windows, air conditioning, and sophisticated safety systems. The introduction of automobiles, which offer a practical and effective mode of transportation and enable the growth of new industries like travel and commuting, has had a significant impact on society.

Learn more about car here:

https://brainly.com/question/1819290

#SPJ4

The increase in the reading on the balance as Magnet 2 was lowered towards Magnet 1 was due to the interaction between the magnetic fields of the two magnets and the orientation of their magnetic poles, leading to an increase in the overall magnetic field strength.

When Magnet 2 was lowered towards Magnet 1, the reading on the balance increased because of the interaction between the magnetic fields of the two magnets.

Magnet 1, with its North pole facing upwards, creates a magnetic field with lines of force flowing out of the North pole and into the South pole. This creates a magnetic field that is stronger near the North pole and weaker near the South pole.

When Magnet 2 was brought near Magnet 1, the magnetic field of Magnet 2 interacts with the magnetic field of Magnet 1.

If the North pole of Magnet 2 is facing the South pole of Magnet 1, the magnetic fields of the two magnets will reinforce each other, leading to an increase in the overall magnetic field strength.

This increase in magnetic field strength can be detected by the balance, causing the reading to increase.

It's important to note that the orientation of the magnetic poles and the direction of the magnetic field lines play a crucial role in the magnetic field interactions between two magnets.

If the North pole of Magnet 2 was facing the North pole of Magnet 1, the magnetic fields would repel each other, causing the reading on the balance to decrease.

To know more about Magnet:

https://brainly.com/question/2841288

#SPJ4

At the top of the mountain where the ambient pressure is 11.5 psi, your tire pressure gauge reads 28 psig. After riding down the mountain to sea level where the ambient pressure is 14.7 psi. The tire pressure gauge at sea level will read 24.8 psig.

In this case, we can start by converting the gauge pressure at the top of the mountain (28 psig) to absolute pressure (pa) using the formula:

pa = gauge pressure + ambient pressure

pa = 28 psig + 11.5 psi

pa = 39.5 psi

At sea level, the ambient pressure is 14.7 psi, so the gauge pressure (pg) can be calculated as:

pg = pa - ambient pressure

pg = 39.5 psi - 14.7 psi

pg = 24.8 psig

So, the tire pressure gauge at sea level will read 24.8 psig.

Here you can learn more about the tire pressure gauge

brainly.com/question/14959478

#SPJ4

The angular velocity of the tip of the blade is angular velocity = 2 * π * 1200 rotations / minute = 7539.82 rad/min.

(a) To find the distance the tip of the blade moves in one revolution, we can use the circumference of a circle:

distance = 2 * π * radius = 2 * π * 0.15 m = 0.94 m

So, the tip of the blade moves a distance of 0.94 meters in one revolution.

(b) To find the linear velocity of the tip of the blade, we can use the formula for linear velocity:

linear velocity = distance / time = 2 * π * radius * rotations / minute

Since the fan completes 1200 revolutions per minute, the linear velocity is:

linear velocity = 2 * π * 0.15 m * 1200 rotations / minute = 94.25 m/s

To find the angular velocity of the tip of the blade, we can use the formula for angular velocity:

angular velocity = 2 * π * rotations / minute

So, the angular velocity of the tip of the blade is:

angular velocity = 2 * π * 1200 rotations / minute = 7539.82 rad/min.

Learn more about angular velocity here

https://brainly.com/question/29557272

#SPJ4

Important Formulas:

[tex]v=\lambda f[/tex]

velocity(measured in m/s) = wavelength(measured in meters) * frequency(measured in hertz)

[tex]T=\dfrac{1}{f}[/tex]

period(measured in seconds) = 1 / frequency(measured in hertz)

__________________________________________________________

Given:

[tex]v=33m/s[/tex]

[tex]f=11Hz[/tex]

[tex]\lambda=?[/tex]

[tex]T=?[/tex]

__________________________________________________________

Rearrange formula for velocity to make wavelength the subject:

[tex]v=\lambda f[/tex]

[tex]\dfrac{v}{f} =\dfrac{\lambda f}{f}[/tex]

[tex]\lambda=\dfrac{v}{f}[/tex]

__________________________________________________________

Finding wavelength:

[tex]\lambda=\dfrac{v}{f}[/tex]

[tex]\lambda=\dfrac{33}{11}[/tex]

[tex]\lambda=3m[/tex]

__________________________________________________________

Finding period:

[tex]T=\dfrac{1}{f}[/tex]

[tex]T=\dfrac{1}{11}[/tex]

[tex]T=0.09[/tex]

__________________________________________________________

Answer:

[tex]\boxed{\lambda=3 \texttt{ meters}}\\\boxed{T=0.09 \texttt{ seconds}}[/tex]

Answer:

60m/s

Explanation:

Whenever two objects are moving in opposite direction the relative speed is obtained by adding the speeds of the two objects.

Here the two vehicles are moving with speed 20m/s and 40m/s .

So the relative speed of the car relative to that of the truck will be,

(40 + 20 ) m/s

60m/s

hope this helps!

Answer:

F = Q E       force exerted by field on charge Q

F = M g    weight of sphere

M g = Q E

E = M g / Q = .0064 kg * 9.80 m/s^2 / 3E-9 C

E = 2.09E7 Newtons/Coulomb  

150N--->7kg, 5) 140N--->5kg, 1) 130N--->7kg, 4) 120N--->3kg, 6) 140N--->3kg and 2) 150N--->1kg. The normal force acting on each box is determined by the weight of the box.

What is force?

Force is an influential physical quantity that can cause an object to change its velocity and/or shape. It is a vector quantity meaning it has both magnitude and direction.

Forces can cause objects to accelerate, decelerate, or change direction. Examples of forces include gravitational force, electromagnetic force, and frictional force. Force is measured in units of Newtons (N). Force is an important concept in physics as it is one of the fundamental concepts of the subject.

Since the weight of each box is determined by its mass, the box with the largest mass will have the greatest.

To learn more about force

brainly.com/question/12785175

#SPJ4

In this situation, both balls will exert electrostatic force on each other in the first example.

Here, in the first scenario, both balls will interact electrostatically. The two balls will reject one another as a result of this electrostatic force.In addition, there will be a vertical downward gravitational force acting on the two balls.

Now that we know, the angle between the two balls will be greater as the horizontal force separates the two balls as the electrostatic force of repulsion between the two balls increases.

As we decrease the charge on one ball, the net electrostatic force between the two balls also reduces since we know that the net electrostatic force between two balls depends on the product of two charges.

The two balls then travel closer to one another as the angle between them diminishes. Additionally, we can see from the free body diagram of two balls that all of the forces acting on the balls are the same; as a result, both balls' angles of inclination with respect to the vertical are same.

Because of this, the angle created by ball l with the vertical equals the angle formed by ball 2.

For more information on charge kindly visit to

brainly.com/question/12104179

#SPJ4

The uncertainty in the position of the electron moving at 30.0 m/s is 0.0003 m.

Electron is an open-source framework that allows developers to create cross-platform desktop applications using web technologies like JavaScript, HTML, and CSS. It is based on the Chromium web browser and Node.js runtime, and developers can use it to build applications for Windows, Linux, and macOS. Electron is used by many popular applications, including Slack, Visual Studio Code, and Atom. It provides a range of powerful tools and APIs to help developers create feature-rich applications quickly and easily.

The uncertainty in the position of the electron is determined by the uncertainty in its velocity, which is 0.00100%.
This means that the uncertainty in the position of the electron is equal to 0.00100% of 30.0 m/s, or 0.0003 m.
Therefore, the uncertainty in the position of the electron moving at 30.0 m/s is 0.0003 m.

To learn more about electron
https://brainly.com/question/860094
#SPJ4