(a) The value of the reaction quotient before any reaction occurs is 0.10 M.
(b) The value of the equilibrium constant for the reaction is 0.38.
The reaction between NO2 and N2O4 can be written as:
2NO2(g) ⇌ N2O4(g)
The reaction quotient (Q) is defined as the ratio of the concentrations of the products raised to their stoichiometric coefficients, to the concentrations of the reactants raised to their stoichiometric coefficients.
At the beginning of the reaction, before any reaction occurs, the concentration of NO2 is 0.10 M, and there is no N2O4. Therefore, the value of Q at this point would be:
Q = (N2O4^2)/(NO2^2)
= 0
The value of the reaction quotient at equilibrium can be found from the given concentrations, [NO2] = 0.016 M and [N2O4] = 0.042 M.
Q = (0.042^2)/(0.016^2)
= 0.38
The value of the equilibrium constant (Kc) is equal to the value of the reaction quotient at equilibrium. Therefore, Kc = 0.38.
Learn more about reaction quotient(Q) here:
https://brainly.com/question/12693045
#SPJ4
calculate how much 10 mg/ml bovine gamma-globulin is needed to prepare 50 ul of 0.5 mg/ml bovine gamma-globulin
You would need 50 μl of the 10 mg/ml bovine gamma-globulin solution to prepare 50 μl of 0.5 mg/ml bovine gamma-globulin solution.
How to prepare the bovine gamma-globulin solution?
To calculate the amount of 10 mg/ml bovine gamma-globulin needed to prepare 50 μl of 0.5 mg/ml bovine gamma-globulin, we can use the following formula:
C1 * V1 = C2 * V2
where C1 is the concentration of the starting solution (10 mg/ml), V1 is the volume of the starting solution needed, C2 is the desired concentration (0.5 mg/ml), and V2 is the desired volume (50 μl).
We want to find V1, so we can rearrange the formula to:
V1 = (C2 * V2) / C1
Plugging in the values, we get:
V1 = (0.5 mg/ml * 50 μl) / (10 mg/ml)
V1 = 0.05 ml = 50 μl
So, you would need 50 μl of the 10 mg/ml bovine gamma-globulin solution to prepare 50 μl of 0.5 mg/ml bovine gamma-globulin solution.
To learn more about bovine gamma-globulin solution:
https://brainly.com/question/27924273
#SPJ4
How many formula units are in a 35.6 g sample of an imaginary compound XM3?
Atomic mass of X = 29 g/mol
Atomic mass of M = 34.5 g/mol
There are 0.560 formula units in a 35.6 g sample of an imaginary compound XM₃.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
Formula units are calculated as 29+ 34.5/35.6=0.560
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ1
help i could use all the help and will be posting more questions later
you need to add 9L of water to 10mL of the solution of HCl with a pH of 3 to change the pH of 6.
First, calculate the amount of HCl present in 10mL of the solution with a pH of 3:
10mL x 0.1M = 1 mmol HCl
Then, calculate the amount of HCl required to raise the pH to 6:
1 mmol HCl x (10^3 - 10^6) = 9 mmol HCl
Finally, calculate the amount of water required to add 9 m mol of HCl to the solution:
9 mmol HCl x (1L/1000 mmol HCl) = 9L water
Hence, you need to add 9L of water to 10mL of the solution of HCl with a pH of 3 to change the pH of 6.
What is ph?
pH is a measure of acidity and alkalinity. It is measured on a scale of 0 to 14, with 0 being the most acidic and 14 being the most basic (alkaline). A pH of 7 is neutral.
Therefore, you need to add 9L of water to 10mL of the solution of HCl with a pH of 3 to change the pH of 6.
To learn more about ph
Here: https://brainly.com/question/12609985
#SPJ1
what is the temperature change the propane undergoes as it is throttled from its saturation pressure to the ambient pressure in the burner? is it gas?
The temperature change that propane undergoes as it is throttled from its saturation pressure to the ambient pressure in a burner depends on the specific conditions and pressure changes involved.
However, it is generally known that throttling a gas leads to a decrease in temperature due to the reduction in pressure. Propane is indeed a gas. Saturation pressure refers to the pressure at which a substance (typically a liquid) changes phase into a gas at a specific temperature. It is the pressure at which the vapor pressure of the liquid equals the pressure surrounding the liquid. When a liquid is heated at constant pressure, its temperature will increase until it reaches its boiling point and begins to vaporize into a gas. At this point, the saturation pressure is reached and further increases in temperature will cause the liquid to boil rapidly, converting it into a gas.
Learn more about boiling point here:
https://brainly.com/question/2153588
#SPJ4
when the ph of was measured, it was found to be 1.2. what are the values of and of chlorous acid? (b) the ph of a 0.10 m propylamine, , aqueous solution was measured as 11.86. what are the values of and of propylamine?
The pH of 0.10 m HClO2(aq) was measured, and it was determined to be 1.2, with chlorous acid concentrations of 0.1072 and 0.9695. A 0.10 m propylamine, C3H7NH2, the aqueous solution was tested.
the pH was found to be 11.86 with propylamine concentrations of 5.65 x 104 and 3.25.
In order to figure this out, we must put down the chemical equation describing the two processes in question.
a) A 0.10 M solution of HClO2 with a pH of 1.2
Let's get first with the pH the concentration of the H3O+ in equilibrium:
[H₃O⁺] = 10^(-pH)
[H₃O⁺] = 10^(-1.2) = 0.063 M
Now, let's write the equilibrium reaction for this acid:
HClO₂ + H₂O <-------> H₃O⁺ + ClO₂⁻
Now, an ICE chart for this reaction:
HClO₂ + H₂O <-------> H₃O⁺ + ClO₂⁻
I: 0.1 0 0
C: -x +x +x
E: 0.1-x x x
This allows us to create the following expression for Ka:
Ka = [H₃O⁺] [ClO₂⁻] / [HClO₂] = x² / 0.1 - x
calculate it above and it's 0.063 M, so, all we have to do is replace this value in the expression, and solve for Ka:
Ka = (0.063)² / 0.1 - 0.063
Ka = 0.1072
Then the pKa is:
pKa = -logKa
pKa = -log(0.1072)
pKa = 0.9695
With this, we use the same procedure for part b) but instead of using pH and H₃O⁺, we will use OH⁻ and pOH.
b) 0.1 M of a C₃H₇NH₂ solution with pH = 11.86
Like in part a) we calculate the concentration of [OH⁻] instead because this is a base so, to get that, we use pOH:
14 = pH + pOH
pOH = 14 - pH
pOH = 14 - 11.86 = 2.14
[OH⁻] = 10^(-pOH)
[OH⁻] = 10^(-2.14) =7.24x10⁻³ M
Now, we use an ICE chart again and do the same procedure as part a) so:
C₃H₇NH₂ + H₂O <-------> C₃H₇NH₃⁺ + OH⁻
I: 0.1 0 0
C: -x +x +x
E: 0.1-x x x
Kb = (7.24x10⁻³)² / (0.1 - 7.24x10⁻³)
Kb = 5.65x10⁻⁴
pKb = -log(5.65x10⁻⁴)
pKb = 3.25
Learn more about concentrations here:
https://brainly.com/question/29276511
#SPJ4
The required Ka and pKa of HClO2 are 0.1072 and 0.9695 while the values of Kb and pKb of propylamine are 5.65x10⁻⁴ and 3.25 respectively.
Given the pH of HClO2 = 1.2
The concentration of HClO2 = 0.1M
(a) We know that [H₃O⁺] = 10^(-pH) then,
[H₃O⁺] = 10^(-1.2) = 0.063 M
the equilibrium reaction for this acid be:
[tex]HClO2 + H2O < ------- > H3O+ + ClO2-[/tex]
The ICE chart for this equation is :
[tex]HClO2 + H2O < --- > H3O+ + ClO2-[/tex]
I: 0.1 0 0
C: -x +x +x
E: 0.1-x x x
Then, Ka = [H3O+] [ClO2-] / [HClO2] = x² / 0.1 - x = 0.63 * 0.63/1 - 0.63
Ka = 0.1072
Then, pKa = -logKa
pKa = -log(0.1072) = 0.9695
(b) concentration of propylamine = 0.1M
The pH of propylamine = 11.86
As [OH] is a base, we determine the concentration of [OH].
14 = pH + pOH
pOH = 14 - 11.86 = 2.14
[OH⁻] = 10^(-pOH) = 10^(-2.14) = 7.24x10⁻³ M
The ICE chart for this reaction be:
[tex]C3H7NH2 + H2O < --- > C3H7NH3+ + OH-[/tex]
I: 0.1 0 0
C: -x +x +x
E: 0.1-x x x
Kb = (7.24x10⁻³)² / (0.1 - 7.24x10⁻³) = 5.65x10⁻⁴
pKb = -log(5.65x10⁻⁴) = 3.25
To learn more about concentration click here https://brainly.com/question/3045247
#SPJ4
complete question: When the pH of 0.10M HClO2(aq) was measured, it was found to be 1.2. (a). What are the values of Ka and pKa of chlorous acid? (b). The pH of a 0.10M propylamine, C3H7NH2, aqueous solution was measured as 11.86. What are the values of Kb and pKb of propylamine?
how much of the water (in ml m l ) contains 165 mg m g of pb p b ? (assume a density of 1.0 g/ml g / m l .)
The Volume of water contains 165 mg of pb is 0.165ml
The amount of matter in a particle or object is represented by the dimensionless quantity mass (symbolised m). The kilogramme (kg) is the accepted unit of mass in the International System (SI).
We can use the following formula to determine how much water has 165 mg of lead in it:
Volume times Density = Mass
Since we are aware of the density of water (1.0 g/ml) and the amount of
lead (165 mg), we can modify the formula to determine the volume:
Mass x Density = Volume
Unit conversion to SI units:
165 mg is equal to 0.165 g
We can now determine the volume:
volume is equal to 0.165 g / 1.0 g/ml (0.165 ml).
To learn more about Volume :
https://brainly.com/question/28273980
#SPJ4
Explain why there would be no reaction between Potassium Chloride and Zinc
Zinc and potassium chloride wouldn't react with each other. There is no reaction because potassium has a higher degree of reactivity than zinc.
Potassium cannot be removed from a compound by zinc. Since zinc is replacing potassium, it must have a greater activity level. It is, however, lower, therefore there is no interaction between these two molecules.
When potassium hydroxide and zinc metal combine, potassium zincate is created as well as hydrogen gas.
Nitric acid being a potent oxidizing agent prevents zinc from reacting with it. It reduces itself to an oxide while oxidizing the hydrogen gas produced by the interaction of zinc with nitric acid to make water.
Learn more about zinc reactions :
brainly.com/question/12083266
There would be no reaction between Potassium Chloride and Zinc as zinc is less reactive than potassium.
What is zinc?Zinc has the chemical symbol Zn and the atomic number 30. At room temperature, zinc is a somewhat brittle metal with a shiny-greyish look when oxidation is eliminated. It is the first element in periodic table group 12 (IIB).
Zinc is the twenty-fourth most prevalent metal in the Earth's crust, with five stable isotopes. Sphalerite (zinc blende), the zinc sulfide mineral, is the most common zinc ore. There would be no reaction between Potassium Chloride and Zinc as zinc is less reactive than potassium.
Therefore, there would be no reaction between Potassium Chloride and Zinc as zinc is less reactive than potassium.
To learn more about Zinc, here:
https://brainly.com/question/1370574
#SPJ1
If 15 grams of solid aluminum reacts with excess hydrochloric acid, how much of each product will be produced? The reaction is a single displacement reaction which produces aluminum chloride and hydrogen gas.
According to the stoichiometry of the given chemical equation, 74.13 g of aluminium chloride and 1.66 g of hydrogen gas are formed.
What is stoichiometry?It is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.
53.96 g aluminium gives 266.68 g aluminium chloride, thus 15 g aluminium will give 15×266.68/53.96=74.13 g and 53.96 g aluminium gives 6 g hydrogen , thus 15 g will give 15×6/53.96=1.66 g of hydrogen.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ1
When pressure and temperature of an ideal gas is doubled and volume is halved the number of molecules of the gas?
When volume is halved, pressure and temperature are doubled, but the number of molecules in an ideal gas remains constant.
This is thus because the number of molecules in a gas depends only on the number of atoms present, and is not affected by factors like pressure, temperature, or volume. PV = nRT, where P is pressure, V is volume, n is the number of moles, R and T are constants, is the formula for the ideal gas law. The number of molecules in the gas remains constant since the number of moles, n, does not change. The only way to change the number of molecules of an ideal gas is to add or remove atoms from the gas. When pressure and temperature are doubled and volume is halved, the density of the gas increases, meaning that the same number of molecules are now occupying a smaller space. This can create greater pressure on the walls of the container, which can be observed as an increase in pressure.
Learn more about from ideal gas
brainly.com/question/28257995
#SPJ4
a red blood cell is placed into each of the following solutions. indicate whether crenation, hemolysis, or neither will occur. solution a: 4.47 % (m/v) nacl solution b: 3.73 % (m/v) glucose solution c: distilled h2o solution d: 8.81 % (m/v) glucose solution e: 5.0 % (m/v) glucose and 0.9 % (m/v) nacl
The behaviour of a red blood cell in each of the solutions can be explained by osmosis:
Solution A (4.47% NaCl): Red blood cells are placed in a hypertonic solution, meaning the concentration of solute (NaCl) is higher outside the cell than inside. This results in a net movement of water out of the cell, causing the cell to shrink or "crenate."
Solution B (3.73% glucose): Red blood cells are placed in an isotonic solution, meaning the concentration of solute (glucose) is equal inside and outside the cell. This results in no net movement of water and no change in the shape of the cell.
Solution C (distilled water): Red blood cells are placed in a hypotonic solution, meaning the concentration of solute is lower outside the cell than inside. This results in a net movement of water into the cell, causing the cell to swell and potentially burst, which is known as "haemolysis."
Solution D (8.81% glucose): Like solution A, red blood cells placed in this hypertonic solution will experience crenation.
Solution E (5.0% glucose and 0.9% NaCl): Red blood cells placed in this solution will experience neither haemolysis nor crenation because the concentration of solute is not high enough to cause either effect.
To know more about haemolysis, visit the link given below:
https://brainly.com/question/30522109
#SPJ4
nonpolar molecules tend to aggregate in water because they are forced to come into close proximity with each other due to
Nonpolar molecules tend to aggregate in water because they are forced to come into close proximity with each other due to hydrophobic interactions.
Nonpolar molecules are compressed together because they are hydrophobic and do not readily dissolve in water. The water-averse portions of the molecules all face in the same direction and push together to create cell membranes in this manner. This prevents water from reaching the molecules. The membrane prevents water from passing through.
The propensity of nonpolar compounds to collect in an aqueous solution and keep out water molecules is known as the hydrophobic effect. The difference between water and nonpolar substances, which increases hydrogen bonds between water molecules and limits the area of contact between them, is known as being hydrophobic, which literally translates as "fearful of water."
To know more about hydrophobic visit
https://brainly.com/question/30074618
#SPJ4
Charged molecules cannot be dissolved in water. This claim regarding water is untrue. The best choice is A.
Positive and negative charges make up each molecule; the positive charges are referred to as anions, and the negative charges are referred to as anions that form during dissociation. Water is a polar solvent with the inherent ability to dissociate into charge-containing molecules and make bonds with other solvents, although it cannot form bonds with any solvent. As a result, Option A is accurate, refuting the claim that charged molecules cannot dissolve in water. The measure of disorder or unpredictability in a system or element is called entropy. Entropy, often known as the hydrophobic effect in thermodynamics, is the free energy shift caused by water around a solute. The effect of hydrophilic is thereby enhanced by the present negative free charges, leading to the aggregation of non-polar molecules.
Learn more about Charged molecules here:
https://brainly.com/question/13209311
#SPJ4
Write the balanced net ionic equation for the addition of aqueous sodium carbonate to a solution of aqueous iron(II) nitrate.
Balanced equation: Fe(NO₃)₂(aq) + Na₂CO₃(aq) ----> FeCO₃(s) + 2NaNO₃(aq) Ionic equation: Fe²⁺(aq) + 2NO₃⁻(aq) + 2Na⁺(aq) + CO₃²⁻(aq) ----> FeCO₃(s) + 2Na⁺(aq) + 2NO₃⁻(aq).
What are Balanced equation?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction.
It is typical to balance chemical equations for both mass and charge in aqueous solutions. Equal numbers and types of atoms are produced on both sides of the equation when balancing for mass.
When the charge is balanced, there is no net charge on either side of the equation. Only the ions are depicted in the equation's state of matter (aq), which denotes that they are in water.
Therefore, Balanced equation: Fe(NO₃)₂(aq) + Na₂CO₃(aq) ----> FeCO₃(s) + 2NaNO₃(aq) Ionic equation: Fe²⁺(aq) + 2NO₃⁻(aq) + 2Na⁺(aq) + CO₃²⁻(aq) ----> FeCO₃(s) + 2Na⁺(aq) + 2NO₃⁻(aq).
To learn more about Balanced equation, refer to the link:
https://brainly.com/question/7181548
#SPJ1
bond energy what makes a reaction endothermic or exothermic why? chemical reaction can be. alot like playing with legos
Exothermic, where less heat is released than it is taken and in exothermic more heat is released in making bonds.
Exothermic reactions in solution give out energy and the temperature increases, while endothermic reactions take in energy and the temperature decreases. Bonds are broken and made in reactions.
Breaking and making bonds can be described as follows-
exothermic - if more heat energy is released in forming bonds in the products than is taken in when breaking bonds in the reactants. Bond energy is less.
endothermic - if less heat energy is released in forming bonds in the products than is taken in when breaking bonds in the reactants. Bond energy is more.
To know more about the Bond energy, here
brainly.com/question/26141360
#SPJ4
of 12
-
+ Automatic Zoom
Coriolis Effect and Atmospheric Circulation for AP Environmental Science Student Guide
Discussion Questions
1. How does the rotation of the earth affect global
air circulation? Examine this simplified diagram of
the earth's major wind belts, and explain how the
Coriolis effect influences the direction of the polar
easterlies, the westerlies, and the trade winds.
As the Earth rotates, the circulating air is deflected. Instead of flowing straight, air deflects to the right in the Northern Hemisphere and to the left in the Southern Hemisphere, creating curved paths.
What does Coriolis effect influence?Hurricanes, for example, spin counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere due to the Coriolis effect. The Coriolis effect deflects air from all directions as it flows toward the low-pressure area at the center of a storm.
Winds flowing from the equator to the North Pole and from the North Pole to the equator are deflected to the right by Coriolis Force, while winds flowing north-south and south-north in the southern hemisphere are deflected to the left.
Thus, The Coriolis effect refers to this deflection.
To learn more about Coriolis effect, follow the link;
https://brainly.com/question/14290551
#SPJ1
a 2.0 l container of oxygen had a pressure of 3.2 atm. what volume would be necessary to decrease the pressure to 1.0 atm?
decrease the pressure of a 2.0 L container of oxygen from 3.2 atm to 1.0 atm, the volume of the container would need to be 6.4L
In order to decrease the pressure of a 2.0 L container of oxygen from 3.2 atm to 1.0 atm, the volume of the container would need to be increased. This can be calculated using Boyle's Law, which states that the pressure and volume of a gas are inversely proportional. Therefore, in order to reduce the pressure from 3.2 atm to 1.0 atm, the volume would need to be increased to 6.4 L. This can be found by solving the equation PV = nRT for V, with P1 being 3.2 atm, P2 being 1.0 atm, n being 1 mol, R being 0.0821, and T being 300 K. Solving this equation gives V2 = 6.4 L. Thus, the volume of the container would need to be increased to 6.4 L in order to decrease the pressure to 1.0 atm.
Learn more about pressure here:
https://brainly.com/question/12971272
#SPJ4
PLEASEE HELP IM DESPERATE
You'll have 20.5 g of hydrochloric acid (HCl) left, which is the answer to your query.
The least amount of hydrochloric acid that can be produced?Data
HCl = 31.4 g
NaOH = 12 g
insufficient HCl =?
equilibrium in a chemical reaction
NaCl and H2O are produced from HCl and NaOH.
HCl's molar mass is equal to 1 + 35.5 = 36.5 g.
NaOH's molar mass is 40 g (23 + 16 + 1)
Figure out the limiting reactant.
Theoretical yield: 36.5/40 = 0.9125 for HCl/NaOH.
Research yield: HCl/NaOH = 31.4/12 = 2.62
Conclusion
Because of the increasing experimental yield, NaOH is the limiting reactant.
The excess reactant's mass should be determined.
35. 5 g of HCl ———————— NaOH weight 40 g
x ———————— NaOH in 12 g
x = (12 x 36.5) / 40
x = 438 / 40
x = 10.95 grams of HCl
Surplus HCl = 31.4 - 10.95
= 20.5 g
You'll have 20.5 g of HCl left, which is the answer to your query.
The complete question is,
To create aqueous sodium chloride and liquid water, aqueous hydrochloric acid must be combined with solid sodium hydroxide. Consider combining 12.g of sodium hydroxide with 31.4g of hydrochloric acid. Determine the smallest amount of hydrochloric acid that could possibly remain after the reaction. The quantity of significant digits in your response must be accurate.
To learn more about reactant's mass refer to:
https://brainly.com/question/19958395
#SPJ1
which functional groups are associated with a dehydration reaction? group of answer choices sh and oh cooh and sh oh and nhh oh and nhh h and oh
The functional groups associated with a dehydration reaction are the "OH" (hydroxyl) and "H" (hydrogen) groups.
A dehydration reaction is a chemical reaction in which a molecule of water (H2O) is eliminated from a reactant, usually an alcohol or an acid. This reaction results in the formation of a new bond between the carbon and the oxygen atoms that were previously bonded to the hydroxyl group.
During a dehydration reaction, the hydroxyl group (OH) loses a hydrogen ion (H) and becomes a double bond between the oxygen and carbon atoms. This results in the elimination of a water molecule and the formation of a new, stronger bond between the carbon and oxygen atoms.
So, the functional groups associated with a dehydration reaction are the "OH" (hydroxyl) and "H" (hydrogen) groups.
To know more about functional group
https://brainly.com/question/29858163
#SPJ4
The combustion of methane is shown in the
following equation: CH4 +202
CO₂ + 2H₂
According to the equation, if 65.5L of methane
undergoes combustion how many liters of
carbon dioxide gas will be produced if the
reaction is carried out at STP?
-D-0
The volume (in liters) of the carbon dioxide gas produced if the reaction is carried out at STP is 65.5 L
How do I determine the volume of carbon dioxide gas produced?We'll begin by examining the eqaution for the reaction to get useful information about the reaction. Details below:
CH₄ +2O₂ -> CO₂ + 2H₂
From the balanced equation above,
1 L of methane, CH₄ reacted to produce 1 L of carbon dioxide, CO₂
With the above information, we can obtain the volume of carbon dioxide, CO₂ produced when 65.5 L of methane, CH₄ reacts at STP. Details below:
1 L of methane, CH₄ reacted to produce 1 L of carbon dioxide, CO₂
Therefore
65.5 L of methane, CH₄ will also react to produce 65.5 L of carbon dioxide, CO₂
Thus, the volume of carbon dioxide, CO₂ produced is 65.5 L
Learn more about volume:
https://brainly.com/question/9614052
#SPJ1
the half-life of radium-226 is 1590 years. if a sample contains 500 mg, how many mg will remain after 1000 years?
The remaining amount after 1000 years is 323.33 mg.
What is radioactivity decay?
An atom's nuclei exhibit radioactivity as a result of nuclear instability. Henry Becquerel made this discovery in 1896. The process of radioactivity is when an unstable atom's nucleus releases radiation to lose energy. In a drawer containing photographic plates, a small quantity of uranium compound was placed after being wrapped in black paper. When these plates were later examined, the findings showed that an exposure had occurred. The phrase "radioactive decay" is used to describe this occurrence. Radioactive elements are those elements or isotopes that emit radiation and undergo radioactivity.
The formula of half-life is
[tex]t_{\frac{1}{2}[/tex] = ln 2/λ
Given that the half-life of radium-226 is 1590 years.
λ = ln 2/ 1590
The formula of radioactivity decay is
N = N₀e^(-λt)
N = final amount
N₀ = initial amount
t = time
Given that
The initial amount is N₀ = 500 mg, λ = ln 2/ 1590, and t = 1000 years
N = 500 e^(- (ln 2/ 1590) ×1000)
N = 323.327737322
N = 323.33
To learn more about half-life, click on the below link:
https://brainly.com/question/17227438
#SPJ4
the molecules of which phase have the greatest intermolecular forces, compared to their kinetic energies? responses solid solid plasma plasma liquid liquid gas
The phase with the greatest intermolecular forces compared to their kinetic energies is the solid phase.
In a solid, the particles are packed closely together and are held in fixed positions by strong intermolecular forces such as covalent bonds or hydrogen bonds. These strong forces keep the particles from moving freely, giving the solid its characteristic rigidity and resistance to change of shape. The kinetic energy of the particles in a solid is much lower than in a liquid or gas, where the particles are more free to move and are not held in fixed positions. This difference in intermolecular forces and kinetic energy gives solids their unique physical properties and makes them behave differently than liquids or gases.
Learn more about intermolecular forces:
brainly.com/question/9007693
#SPJ4
consider the reaction: 3h2 n2 --> 2nh3. if a mixture of 3.0 mole of h2 and 3.0 mole n2 is taken, how many moles of excess reactant remain unused?
There are 2 moles of excess reactant remain unused.
The given reaction: -
3H2(g) + N2 -----> 2NH3(g)
3 mole 1 mole 2 mole
Here in the given reaction we see that 3 mole of H2 reacts with 1 mole of N2 to produced 2 mole of NH3.
The mixture contain 3.0 mole of H2 and 3.0 mole of N2,
So, 1.0 mole of N2 can react with 3.0 mole of H2.
So (3.0 - 1.0) = 2.0 moles of N2 remain unused.
2.00 mole of N2 reactant remain unused.
Reactants are the substances that are involved in a chemical reaction and undergo changes to produce new substances, known as products. In a chemical reaction, the reactants are the starting materials that are combined to form the end products. These reactants are characterized by their molecular formula and chemical properties, which determine the type of reaction that will occur.
The amount of reactants used in a reaction is an important factor in determining the amount of product produced. In some reactions, only a small amount of reactant is needed to produce the desired product, while in others, large amounts of reactants are required. The type of reactants used in a reaction also determines the rate at which the reaction will proceed and the amount of energy required to initiate the reaction.
To learn more about Reactant visit here:
brainly.com/question/30129541
#SPJ4
cetic acid (hc2h3o2) is the active ingredient in vinegar. calculate the mass percent composition of oxygen in acetic acid.
Acetic acid (hc2h3o2) is the active ingredient in vinegar. 26.67 grams mass percent composition of oxygen in acetic acid.
Acetic acid, also known as HC2H3O2, is composed of two hydrogen atoms, two carbon atoms, and two oxygen atoms. To calculate the mass percent composition of oxygen in acetic acid, we must first find the molar mass of acetic acid. The molar mass of acetic acid is 60.052 g/mol. The molar mass of oxygen is 16.00 g/mol. Therefore, the mass percent composition of oxygen in acetic acid is 26.67%. This means that for every 100 grams of acetic acid, there are approximately 26.67 grams of oxygen atoms. the pressure of a gas is equal to the number of moles of the gas multiplied by its temperature and the universal gas constant, divided by the volume of the container.
Learn more about Acetic acid here:
https://brainly.com/question/15202177
#SPJ4
For each of the following descriptions of reactions below:
Write a balanced chemical equation
Write a balanced complete ionic equation
Circle the spectator ions in the complete ionic equation
Write a balanced net ionic equation
Draw a square around the precipitate in the net ionic equation
If no reaction takes place, then only include the balanced chemical equation and write "no reaction" instead of the other four parts.
A) Aqueous solutions of lithium bromide and silver nitrate are mixed.
B) Aqueous solutions of ammonium iodide and lead (II) nitrate are mixed.
C) Aqueous solutions of ammonium sulfide and potassium hydroxide are mixed
Do this in another file or on a piece of paper and upload that file or picture to this question. You need to upload as a pdf, jpeg, png, or heic. There is a blue "Attach A File" button at the bottom of this question.
The balanced chemical reaction between lithium bromide and silver nitrate is written as follows:
[tex]\rm LiBr (aq) + AgNO_{3} (aq) \rightarrow LiNO_{3} (aq) + AgBr (s)[/tex]
Here, the spectator ions are Li+ and NO₃-. Hence, the net ionic equation is: [tex]\rm Ag^{+} (aq) + Br^{-}(aq) \rightarrow AgBr (s)[/tex]
What is balanced equation of reactions ?The balanced equation of a reaction shows the perfect stoichiometry of reactants and products. The number of each elements in the reactants must be equal to their number in the product side.
Net ionic equation of a reaction is written in terms of the ions which are giving the solid product. Remaining ions are called spectator ions.
The remaining reactions can be completed as following :
[tex]\rm NH_{4}I (aq) + Pb(NO_{3}) _{2}(aq) \rightarrow NH_{4} NO_{3} (aq) + PbI_{2} (s)[/tex]
Here, the spectator ions are NH4+ and NO₃-.
Then, net ionic equation is:
[tex]\rm Pb^{2+} (aq)+ I^{-} (aq) \rightarrow PbI_{2} (s)[/tex]
The third reaction can be written as follows:
[tex]\rm (NH_{4})_{2}S + KOH \rightarrow NH_{4}OH + K_{2}S[/tex]
Here, the solid product is potassium sulphide. The net ionic reaction is written as follows:
[tex]\rm K^{+} (aq) + S^{2-} (aq) \rightarrow K_{2} S(s)[/tex]
Find more on balanced chemical equations:
brainly.com/question/13103210
#SPJ1
how many grams of ca(oh)2 are contained in 100 ml of 0.50 m ca(oh)2 solution? the molar mass of ca(oh)2
The molecular mass Ca(OH)2 = 40.078 g/mol
Grams of Ca(OH)2 = 275.935 g
Ca(OH)2 is calcium hydroxide, a compound composed of calcium, oxygen, and hydrogen atoms. The chemical formula for calcium hydroxide is Ca(OH)2, and the equation for its formation is: CaO + H2O → Ca(OH)2
Ca(OH)2 -> Ca2+ + 2OH-
The equation represents the dissociation of calcium hydroxide, Ca(OH)2, in water to form calcium ions (Ca2+) and hydroxide ions (OH-) in solution.
Molarity (M) = [tex]\frac{moles of solute}{liter of solution}[/tex]
Moles of Ca(OH)2 = Molarity x Volume x Molecular Weight
Moles of Ca(OH)2 = [tex]0.50 M * 0.100 L * 74.10 g/mol[/tex]
Moles of Ca(OH)2 = [tex]3.705 moles[/tex]
Grams of Ca(OH)2 = Moles of Ca(OH)2 x Molecular Weight
Grams of Ca(OH)2 = [tex]3.705 moles * 74.10 g/mol[/tex]
Grams of Ca(OH)2 = [tex]275.935 g[/tex]
learn more about calcium hydroxide Refer:brainly.com/question/14424859
#SPJ4
how to separate copper and salt step by step method
We can separate the mixture of copper and salt by putting both mixtures in water. Salt will dissolve and copper will not. We can separate them easily.
Salt can dissolve in water because it is a soluble substance. Salt is made up of the negative ion of an acid and the positive ion of the base. When an acid and base dissolve neutralization reaction occurs.
Copper doesn't dissolve in water because copper is a metal. Not even in salty water. Copper has great metal conductivity. The melting and boiling point of copper is very high, that is, 1084.32 degrees Celsius and 2562 degrees Celsius.
Copper metal doesn't dissolve in water however exposure to such metals to air adds a layer of oxide to the metal. The oxide layer does dissolve in water to a slight extent.
Read more about soluble and insoluble substances: https://brainly.com/question/29046275
A pH strip was used to test the pH of a glass of water. The image shows the results.
Use the scale below to determine the pH value of the water, and determine whether the water is acidic, alkaline, or
neutral. Then predict what will happen to the pH if someone were to place a straw into the water and blow.
The pH strip is used to test the pH of a solution. The pH of water is neutral which is around 7.
What is pH?The pH is known as the power of hydrogen. The pH is used to measure the degree of basicity and acidity of a solution. The amount of hydrogen ion concentration in a solution determines the pH of the solution. Mathematically, pH is given by the formula:
pH -= -log [H⁺]
The pH strip is a strip of litmus paper with which a person can measure the pH value of a liquid solution. The substance in the pH paper causes the paper to show a different color at different acidity values. The official pH scale is between the pH values of 0 to 14, where 0 is very acidic and 14 very alkaline and 7 is neutral pH.
Learn more about pH here:
https://brainly.com/question/15289714
#SPJ1
Answer:
The pH value of the water is 7. And I don't exactly know what would happen if you put a straw into it and blew into it, but if I had to make a guess then I would guess that the pH value would go down because the water is moving around.
the covalent bond formed between two amino acids is called a(n) a. glycosidic bond b. peptide bond c. phosphodiester bond d. ester bond e. hydrolytic bond
The covalent bond formed between two amino acids is called a peptide bond.
Peptide bonds are formed by the condensation reaction between the carboxyl group (-COOH) of one amino acid and the amino group (-NH2) of another, resulting in the release of a molecule of water (H2O). This reaction forms a covalent bond, known as a peptide bond, which links the two amino acids together in a linear sequence.
Peptide bonds are critical in the formation of polypeptides and proteins, as they determine the sequence and structure of these biomolecules. The peptide bond is a single bond, and its formation and stability are due to the partial double bond character that it possesses. This partial double bond character is due to the delocalization of electrons in the bond and the contribution of resonance from the atoms on either side of the bond.
In summary, a peptide bond is a type of covalent bond that forms between two amino acids and is critical in the formation and stability of polypeptides and proteins.
Learn more about peptide bond:
brainly.com/question/28295128
#SPJ
why would the distribution of water vapor change across the globe in the way that you identified in q13?
The distribution of water vapor across the globe changes in response to differences in temperature, pressure, and humidity. As temperatures increase, the air can hold more water vapor and the relative humidity decreases.
What is humidity ?Humidity is the amount of water vapor or moisture present in the air. It is measured in terms of relative humidity, which is the amount of water vapor present in the air relative to the amount that would be present if the air were saturated. Humidity levels can vary greatly from place to place, and different amounts of humidity can make the air feel more or less comfortable. High humidity levels can cause discomfort due to the feeling of sticky air, while low levels of humidity can lead to dryness in the skin, eyes, and throat. Humidity also affects the rate of evaporation, which can influence the rate of cooling in hot climates. Additionally, humidity can affect the human body's ability to cool off through perspiration, as the sweat won't evaporate as quickly in high humidity.
To learn more about humidity
https://brainly.com/question/21494654
#SPJ4
Given the balanced chemical equation for the decomposition for INO, and the rate of disappearance of INO, write the expressions for the rates of appearance of I_2 and NO.
2 INO(g) > I_2(g) + 2 NO(g)
Reactant Product (I_2) Product (NO)
- ?[INO] x y
--------- = ------- = --------
2 ?t w z
Fill w,x,y,z.
According to chemical equilibrium, [tex]\frac{d[I_2]}{dt}[/tex] and [tex]\frac{d[NO]}{dt}[/tex] is the expressions for the rates of appearance of I₂ and NO respectively.
Chemical equilibrium is the state that develops during a reversible chemical reaction when there is no net change in the ratio of reactants to products. When a chemical reaction is reversible, the products immediately after they are generated combine to form the reactants once more. There is no net change in the quantity of the chemicals involved in the chemical reaction when the two opposing processes are in equilibrium and happening at equal rates. When the reaction is in equilibrium, it is deemed finished. The quantitative formulation identifies the conditions needed for equilibrium. Changes in concentration, changes in pressure and temperature, and the presence of a catalyst are all factors that influence chemical equilibrium.
Learn more about chemical equilibrium.
brainly.com/question/3920294
#SPJ4
Calculate the specific heat capacity for a 32.3-g sample of titanium that absorbs 392 j when its temperature increases from 42.1 °c to 65.3 °c.
The specific heat for the given sample will be 0.522 J/g°C
Q= mcΔT,
here Q is the heat energy absorbed,
m is the mass of the sample,
ΔT is the change in temperature.
Q= m*c*ΔT,
Q= m*c*(T2-T1)
since we have to find the specific heat capacity therefore,
c= Q*(T2-T1)/m
putting values,
c= 392/(65.3-42.1)*32.3
c= 392/23.2*32.3
c= 392/749.36
c=0.522 J/g°C
The specific heat capacity is the amount of heat absorbed by a unit mass of a material when it's temperature is increased by 1°C.
The S.I unit for Specific heat capacity is Joule per kelvin per kilogram.
To know more about Specific heat capacity,
https://brainly.com/question/27862577