what was the most important difference in development between isaac newton's theory of planetary motion and that of johannes kepler?

Answers

Answer 1

The most important difference in development between Isaac Newton's theory of planetary motion and that of Johannes Kepler was the explanation of why planets move in the way that they do.

Kepler's laws of planetary motion were based on extensive observations of the positions of the planets in the sky, and he discovered that planets move in elliptical orbits around the sun, with the sun located at one of the foci of the ellipse.

Isaac Newton, on the other hand, was able to provide a physical explanation for why planets move in elliptical orbits around the sun. Newton's law of universal gravitation stated that all objects in the universe are attracted to each other with a force that is proportional to the product of their masses and inversely proportional to the square of the distance between them.

Using this law, Newton was able to demonstrate that the gravitational attraction between a planet and the sun causes the planet to move in an elliptical orbit.

For more similar questions on planetary:

https://brainly.com/question/22424027

#SPJ11


Related Questions

what is the angular momentum of a thin loop of radius 2m and mass 1 kg, rotating at a velocity of 4 rad/s?

Answers

The angular momentum of a thin loop of radius 2m and mass 1 kg, rotating at a velocity of 4 rad/s is 8 kg·rad/s

What is angular momentum?

The rotational equivalent of linear momentum is angular momentum, often known as moment of momentum or rotational momentum. It is a conserved quantity, meaning that the total angular momentum of a closed system stays constant, making it a significant physical quantity. Both the direction and the amplitude of the angular momentum are always conserved. The functional characteristics of motorbikes, frisbees, bullets, and gyroscopes are due to the conservation of angular momentum.Angular momentum conservation also explains why storms occur.

Given :  m=1 kg       w=4 rad/s        r=2 mm

So, angular momentum   L=mwr

⟹ L=1×4×2

= 8 kg rad /s

To know more about angular momentum, click the link given below:

https://brainly.com/question/29897173

#SPJ4

A marble is rolling at a velocity 100cm/sec with a momentum of 10,000 g-cm/sec. What is it’s mass?

Answers

Answer:

100g

Explanation:

Use the formula,

momentum = mass* velocity

Now substitute the respective values,

10,000g - cm/s = m * 100 cm/s

m = 10⁴ g-cm/s / 100 cm/s

m = 100g

And we are done!

determine the moment of each of the three forces about point b MF1(B)=? MF2(B)=? MF3(B)=?

Answers

MF1(B)= 149.52 N - m, MF2(B)= 600 N - m, MF3(B)= ON - m.

Explain about force?

Force is a vector quantity that is defined as the rate of change of momentum of an object with respect to time. It is measured in Newtons (N) and is the product of mass and acceleration, according to Newton's second law of motion. Force can be applied by pushing, pulling, or twisting an object and can be used to create motion, stop motion, or change the direction of motion. Force can also influence the shape of an object through compression, tension, and shear.

(MF₁) B = F₁ cos 30° (3) – F₁ sin 30° (4)

           = 250 cos 30° (3) — 250 sin 30° (4)

           = 649.52 - 500

           = 149.52 N - m

(MF₂) B = F₂ cos 60° (4) – F₂ sin 60° (0)

            = 300 cos 60° (4) — 300 sin 60° (0)

            = 600 - 0

            = 600 N - m

As the force F3 passes through point B, moment of the force F3 about point B is zero.

(MF3)B = ON - m

Therefore, MF1(B)= 149.52 N - m, MF2(B)= 600 N - m, MF3(B)= ON - m is the answer.

To learn more about force from the link

https://brainly.com/question/13191643

#SPJ4

Activity 3 A driver parked his car in the open on a hot day because he wanted to go for lunch in a small town A man in the tow. advised the driver to park the car under a tree shade but the driver refused. Task: Prepare a comprehensive message with reasons that would convince the driver to pack the car under the shade.​

Answers

Answer:

Dear driver,

I hope this message finds you well. I am writing to you today because I noticed that you have parked your car in the open on this hot day. I understand that you are planning to go for lunch in the town, but I would like to respectfully offer you some advice.

I strongly recommend that you park your car under the shade of a tree. There are several reasons for this that I would like to share with you. Firstly, parking your car in direct sunlight can cause the interior to become extremely hot and uncomfortable, which can make it difficult to get back into your vehicle after lunch. This can also cause the steering wheel and other interior surfaces to become too hot to touch, which can be dangerous.

Furthermore, parking your car in direct sunlight can also have a negative impact on the health of your car. The intense heat can cause the dashboard, upholstery, and other materials to fade and deteriorate over time. It can also increase the risk of interior damage from sun exposure and make the car look older than it actually is.

Finally, parking under the shade of a tree will help to keep your car cooler, which can make it more comfortable for you to get back into and drive when you are ready to leave. This can also help to extend the life of your car and maintain its appearance.

I hope that these reasons have convinced you to park your car under the shade of a tree during your time in the town. If you have any further questions or concerns, please don't hesitate to reach out to me.

Thank you for your time and consideration.

Explanation:

a bicycle with 19-in.-diameter wheels has its gears set so that the chain has a 6-in. radius on the front sprocket and 4-in. radius on the rear sprocket. the cyclist pedals at 190 rpm. find the linear speed of the bicycle in in/min (correct to at least two decimal places)

Answers

The linear speed of the bicycle is approximately 14145.1 in./min if a bicycle with 19-in.-diameter wheels has its gears set so that the chain has a 6-in. radius on the front sprocket and 4-in. radius on the rear sprocket.

We can use the principle of similar triangles to find the linear speed of the bicycle.

Let's consider a single revolution of the front sprocket. During this revolution, the chain moves through an arc of 6 inches on the front sprocket and 4 inches on the rear sprocket. These two arcs form similar right triangles with the radius of the sprocket as the hypotenuse and half of the circumference of the sprocket as the other two sides.

So, the ratio of the length of the arcs is equal to the ratio of the radii of the sprockets:

Arc length on front sprocket / Arc length on rear sprocket = 6 in. / 4 in. = 3/2

Next, we can find the linear speed of the bicycle. We can start by finding the circumference of each wheel and then the linear speed of one revolution of the front sprocket.

Circumference of the front wheel = pi * 19 in. = 59.08 in.

Circumference of the rear wheel = pi * 19 in. = 59.08 in.

Linear speed of one revolution of the front sprocket = Circumference of the front wheel * Arc length on front sprocket / (2 * pi) = 59.08 in. * 6 in. / (2 * pi) = 74.49 in.

Finally, we can find the linear speed of the bicycle by multiplying the linear speed of one revolution of the front sprocket by the number of revolutions per minute made by the cyclist.

Linear speed of the bicycle = Linear speed of one revolution of the front sprocket * Cyclist's pedal rate (RPM) = 74.49 in. * 190 RPM = 14145.1 in./min

So, the linear speed of the bicycle is approximately 14145.1 in./min.

Learn more about linear speed here

https://brainly.com/question/12707353

#SPJ4

can the internal forces within a soccer ball produce an impulse on the soccer ball to change its momentum why or why not

Answers

The internal forces within a soccer ball can produce an impulse on the soccer ball to change its momentum. When the ball is struck by a player's foot, the internal forces within the ball cause it to compress and rebound.

What is the compress ?

Compression is the process of reducing the size of a file or data set by encoding information using fewer bits. It is used to reduce the amount of data sent over a network or stored on a hard drive. Compression is generally done by compressing data into smaller data sets, which are then decompressed when needed. Compression can also be used to reduce the size of images, allowing them to be stored or transmitted more quickly. Compression algorithms such as lossless and loss can also be used to reduce the amount of data loss when transmitting or storing data.

To learn more about compress

https://brainly.com/question/29563259

#SPJ4

Similarities and differences between thermionic emission and liquid evaporation

Answers

There are both similarities and differences between thermionic emission and liquid evaporation elaborated below.

Vapourization is the process by which the liquid state transforms into the vapour state, and thermonic emission is the thermally induced inflow of charge carriers.

The thermally convinced ingress of charge carriers from a face or over an implicit-energy barrier is known as thermionic emission. This happens because, as we are aware, the thermal energy applied to the carrier overrides the material's ability to perform its intended function.

The process through which a liquid transforms into a gas is known as vaporisation. The molecules' kinetic energy increases along with the temperature. The force of attraction between the molecules weakens as a result of this increase in kinetic energy, allowing them to escape into the environment as vapours.

To know more about thermionic emission:

https://brainly.com/question/28826625

#SPJ4

how many peaks appear in the proton-decoupled 13c nmr spectrum of 2-methyl-2-butene?

Answers

In the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene, each peak corresponds to a unique carbon environment in the molecule.

2-methyl-2-butene has the following carbon atoms:

A tertiary carbon attached to three other carbons (CH3 group)
A secondary carbon attached to two other carbons and a hydrogen (CH2 group)
A secondary carbon attached to two other carbons and a hydrogen (CH2 group)
Thus, in the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene, we expect to see three distinct peaks, each corresponding to one of the three unique carbon environments in the molecule

The number of peaks in the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene is three, and this reflects the three distinct carbon environments present in the molecule.

In nuclear magnetic resonance (NMR) spectroscopy, the number of peaks observed in a spectrum is related to the number of distinct chemical environments that the nuclei experience. The 13C NMR spectrum of 2-methyl-2-butene, a molecule with the chemical formula C6H12, can provide valuable information about the structure and bonding of the molecule. In this context, the question is asking how many peaks will be observed in the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene.

Answer:

To determine the number of peaks in the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene, we need to consider the different carbon atoms present in the molecule and the chemical environments they experience.

2-methyl-2-butene has six carbon atoms, labeled as C1 to C6 in the following diagram:

markdown

Copy code

       H

       |

H-C=C-C-H

|   | | |

H   H H H

|   | | |

C2  C1-C3-C4-C5-C6

   |   | | | |

   H   H H H H

Carbon atoms C1, C3, and C4 are part of the main chain of the molecule and are all bonded to two other carbon atoms and one hydrogen atom. As a result, these carbon atoms experience similar chemical environments and will produce a single peak in the 13C NMR spectrum.

Carbon atoms C2, C5, and C6, on the other hand, are part of the methyl groups attached to the main chain. These carbon atoms are each bonded to three hydrogen atoms and experience a slightly different chemical environment compared to the carbon atoms in the main chain. As a result, these carbon atoms will each produce a separate peak in the 13C NMR spectrum.

Therefore, the proton-decoupled 13C NMR spectrum of 2-methyl-2-butene will show three peaks, corresponding to the three distinct carbon environments in the molecule.

Here you can learn more about NMR spectrum

https://brainly.com/question/30546657#

#SPJ11

according to newton's law of universal gravitation, if the moon were four times further from earth, the force by earth on the moon would:

Answers

According to Newton's Law of Universal Gravitation, if the Moon were four times further from Earth, the force by Earth on the Moon would be one-sixteenth (1/16) of the current gravitational force between the two bodies.

This is because the gravitational force between two objects is inversely proportional to the square of the distance between them. Therefore, as the distance between the Earth and the Moon increases, the gravitational force between them decreases.

Learn more about  newton's law of universal gravitation:

https://brainly.com/question/29628754

#SPJ4

The asteroid or comet that killed the dinosaurs was probably about how large in diameter?

Answers

Thought to have been between 10 and 15 kilometers broad, the asteroid's speed during the encounter created the second-largest crater on the planet, which is now 150 kilometers in diameter.

Large, stony rocks called asteroids orbit the Sun. Their diameter ranges from a few to several hundred meters. A meteorite is any piece of an asteroid that survives impact with our planet. The most widely recognized idea for the catastrophic extinction at the end of the Mesozoic Era is the Alvarez hypothesis, which at first caused controversy.

Paul asserts, "Since we've located the crater, we have pretty strong evidence supporting an asteroid impact. It is currently mostly submerged on the ocean floor off the coast of Mexico.

Learn more about asteroid Visit: brainly.com/question/11996385

#SPJ4

describe how you would use an uncalibrated force probe and the springs in question 1 to develop a quantitative

Answers

By using two known mass pans or objects, we can create the calibrated force probe using the uncalibrated force probe and springs that are already provided.

What occurs when an object is subjected to force from both sides?

Newton's third law states that if object A exerts a force on object B, then object B must exert a force of equal size and in the opposite direction on object A. This law serves as an example of how forces always exist in pairs in nature and how no body can exert a force without also experiencing one.

What distinguishes a balanced force from an imbalanced force?

When forces are balanced, they cancel one another out, causing the item they are acting on to remain in motion. conflicting forces don't cancel out each other and cause the thing they are acting on to modify its motion.

To know more about calibrated force visit:-

https://brainly.com/question/13575672

#SPJ4

a block weighing 55 lb is being pushed by a 13 lb force on a smooth surface. determine the acceleration of the block rounded to three significant figures.

Answers

On a flat surface, a 55 kg block is being dragged by something like a 13 lb force. The block accelerates at a rate of 7.64 feet per second.

What are example and force?

As a response, the body's motion, shape, height, etc., could also alter. An alternative would be to firmly push or shove a door. Force is a vector quantity, hence it has a magnitude and direction. According to Newton's second law, pressure is the "service offering of a body's normal and acceleration."

What characteristics does force have?

Therefore, the characteristics of columns of force are just that they begin at a positively charged ions and end at a negative charge, never cross, are proportionate to charge, and cannot pass through a conductor.

W = 55lb

m = w/g

g = 32.18 ft/s2

= 55/ 32.18

= 1.70 lbm

F = 13 lb

F = ma

13 = 1.70 * a

a = 7.64 ft/s2

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

If a nearsighted person has a far point df that is 3. 50m from the eye, what is the focal length f1 of the contact lenses that the person would need to see an object at infinity clearly? Express your answer in meters. If a farsighted person has a near point that is 0. 600m from the eye, what is the focal length f2 of the contact lenses that the person would need to be able to read a book held at 0. 350m from the person's eyes? Express your answer in meters

Answers

(-3.5 m) (-0.22man) The focal length f1 of the lenses contacts infinity clearly if a nearsighted person has a distant point df that is 3. 50 m from the eye.

What is focal distance vs focal length?

The focal length of a lens, when focussed at infinity, is the distance between its rear nodal point and the focusing plane (where the camera's sensor is located). This is a characteristic of the lens that controls both the angle of vision and the perspective.

The focal length is the distance from the principal focus to the concave lens' optical centre.

The magnification at which a lens pictures far-off objects depends on its focal length. It is equivalent to the separation between the image plane and a pinhole that can capture distant objects that are the same size as the target lens.

Therefore, The sign convention dictates that the focal length of a concave lens always is negative.

Learn more about focal distance here:

https://brainly.com/question/13654218

#SPJ4

g if you changed the source wavelength to a longer wavelength, e.g. 600nm, how would the distance between the zero order maximum and the third order maximum change?

Answers

There would be an increase in the maximum order.

How will the wavelength change?

If you change the source wavelength to a longer wavelength, for example, from 500 nm to 600 nm, the distance between the zero order maximum and the third order maximum would increase.

The distance between the diffraction peaks in a diffraction grating is proportional to the wavelength of the light. As the wavelength increases, the distance between the diffraction peaks also increases. The diffraction peaks are also proportional to the order of the diffraction. Therefore, as the wavelength increases, the distance between the zero order maximum and the third order maximum also increases.

Learn more about wavelength:https://brainly.com/question/13533093?

#SPJ1

A steel wrecking ball is moving with 30,000 J of kinetic energy. The ball collides witha spring and comes to a complete stop. If the spring has a k = 50,000 N/m how much is the spring compressed?

Answers

Answer:

1.02 m

Explanation:

We are here given that ,

Kinetic energy= 30,000 J spring constant= 50,000N/m

We need to find out the compression in the spring. As we know that,

[tex]\longrightarrow E = \dfrac{1}{2}kx^2 \\[/tex]

where [tex]x[/tex] is the compression in the spring. So that,

[tex]\longrightarrow 30,000 J = \dfrac{1}{2}\times 50,000 \times x^2 \\[/tex]

[tex]\longrightarrow x^2=\dfrac{60,000}{50,000} \\[/tex]

[tex]\longrightarrow x^2=\dfrac{6}{5}= 1.2m^2\\[/tex]

[tex]\longrightarrow x=\sqrt{1.2} m \\[/tex]

[tex]\longrightarrow \underline{\underline{ x \approx 1.02 \ m }} \\[/tex]

and we are done!

how does a simple cell work

Answers

Answer:

A simple cell can be made by connecting two different metals in contact with an electrolyte

A simple cell consists of two solid electrodes placed in an electrolyte connected together by an electrical conductor such as wire. The two electrodes must be two different metals. The electrolyte can be acid solution, alkaline solution, salt solution or even a fruit such as orange or lemon.

germanium is a matalloid. this means it has the same properties as a_ and a_

Answers

Germanium is a metalloid. this means it has the same properties as a metal and a nonmetal.

What is metalloid?

In chemistry, a chemical element that forms a simple substance with properties in-between those of a conventional metal and a typical nonmetal is referred to as a metalloid.

The name is typically used to describe a collection of six to nine elements (boron, silicon, germanium, arsenic, antimony, tellurium, and maybe bismuth, polonium, and astatine) that can be found close to the main block of the periodic table, also known as the P-block.

Learn more about metalloid here:

https://brainly.com/question/20114909

#SPJ1

there is an electric space heater that operates at 120v. two heating elements are used with resistances r1 and r2. they can be operated in parallel, series, or separately. the highest power setting is 1440w and the lowest is 320w. what are the values of r1 and r2? what are the intermediate power settings?

Answers

The values of R1 = 11.27 ohms  and R2 = 60 ohms. P = 201.6W In this way, by adjusting the configuration of the heating elements and the resistance values, a range of power settings can be achieved.

A) To determine the values for R1 and R2, we need to first find the maximum and minimum current values for the heating elements. We can use Ohm's law to calculate the current, I, in the circuit:

I = V / R, where V is the voltage and R is the resistance.

For the maximum power setting of 1280W, we have:

I_max = P_max / V = 1280W / 120V = 10.67A

For the minimum power setting of 240W, we have:

I_min = P_min / V = 240W / 120V = 2A

To calculate the resistance of each heating element, we can use Ohm's law again:

R = V / I

For R1, using the maximum current value:

R1 = V / I_max = 120V / 10.67A = 11.27 ohms

For R2, using the minimum current value:

R2 = V / I_min = 120V / 2A = 60 ohms

B) The intermediate power settings can be achieved by varying the resistance of the heating elements. By connecting the heating elements in series or parallel, the total resistance of the circuit can be adjusted, which will change the current in the circuit and thus the power.

For example, to achieve a power setting of 720W, we can connect the heating elements in series, which will give us a total resistance of 11.27 + 60 = 71.27 ohms. Using Ohm's law, we can then calculate the current:

I = V / (R1 + R2) = 120V / 71.27 ohms = 1.68A

And the power:

P = I × V = 1.68A × 120V = 201.6W

In this way, by adjusting the configuration of the heating elements and the resistance values, a range of power settings can be achieved.

Learn more about power:

brainly.com/question/27442707

#SPJ4

We are designing an electric space heater to operate from 120VDC. Two heating elements with resistance R1 and R2 are to beused that can be operated in parallel, seperately, or inseries. The highest power is to be 1280W, and the lowestpower is to be 240W. Draw a cicuit diagram.

A) What are the values needed for R1 and R2?

B) What intermediate power settings are available?

20 points !! An ultraviolet wave from the Sun traveling at the speed of light has a wavelength of 3 × 10−8m. Calculate the frequency of this wave.

Answers

Answer:

[tex]1.0 \times 10 {}^{16} per \: second[/tex]

or simply

1.0×10¹⁶/s

Explanation:

Greetings !!

Given values :-

speed of light= 3×10⁸

wavelength= 3×10-⁸

required value :-

frequency= ?

solution:-

Firstly, recall the velocity-wavelenght equation

V=f λ

Substitute known variables into the equation

(3×10⁸) = f(3×10-⁸)

Solve for frequency

f= 1.0×10¹⁶/s.

If you have any questions or unclear ideas tag on comment box

Hope it helps!!!

I’m only answering so that you can give him brainliest because he deserves it

2. a solid conducting sphere (or any shaped conductor), charged either positively or negatively, has no electric field inside it. how is this so?

Answers

It has a consistent distribution of the charges in a solid conducting sphere (or any shaped conductor), charged either positively or negatively, has no electric field inside it.

When retained in an electric or magnetic field, the basic physical characteristic of matter, electric charge, produces a force. A moving electric charge creates a magnetic field, and an electric charge is related with an electric field. Magnetic and electric fields combine to form the electromagnetic field. The interaction of the charges results in the electromagnetic force, which is the fundamental force in physics. Tell us about electric charges, their varieties, and their characteristics throughout this session. A scalar quantity is an electric charge. In addition to having a magnitude and direction, a quantity must also abide by the laws of vector addition, such as the parallelogram law of vector addition and the triangle law of vector addition. The quantity is only referred to as a vector quantity after vector addition.

Learn more about Charges

brainly.com/question/3412043

#SPJ4

as the sun angle , the amount of energy reaching the surface . question 16 options: increases; decreases increases or decreases; remains constant increases; increases decreases; increases

Answers

As the sun angle decreases, the amount of energy reaching the surface decreases.

The sun angle refers to the angle between the sun and the horizontal surface. The higher the sun angle, the more direct the sun's rays are reaching the surface, which results in a higher amount of energy.

On the other hand, when the sun angle is lower, the sun's rays are more spread out and less direct, leading to a decrease in the amount of energy reaching the surface.

Additionally, the sun angle changes throughout the day as the earth rotates and also changes seasonally as the earth orbits the sun. Understanding the relationship between the sun angle and the amount of energy reaching the surface is important for various applications, including solar energy generation and building design to optimize energy use.

To learn more about solar energy visit: https://brainly.com/question/17711999

#SPJ4

Your question seems incomplete, but I suppose the question was:

"as the sun angle _______, the amount of energy reaching the surface ______.

question options: increases; decreases increases or decreases; remains constant increases; increases decreases; increases."

A rhinoceros is at the origin of coordinates at time t1=0. For the time interval from t1 to t2= 10.0s, the rhino's average velocity has x-component -3.20 m/s and y-component 5.40 m/s.
*At time t2=10.0s what is the x-coordinate of the rhino?
*At time t1=10.0s what is the y-coordinate of the rhino?
*How far is the rhino from the origin?

Answers

At t2=10.0s, the x-coordinate of the rhino is -32 and at time t1=10, the y-coordinate of the rhino is 64.8m. The rhino is 72.27 m.

Given:

x-component of avg. velocity is 3.20 m/s.

x-component of avg. velocity 5.40 m/s.

initial position of rhino, (x1,y1)= (0,0)

initial time, t1=0s

final time, t2=12s

a) As we know that average velocity is total displacement per unit time.

Position of x-coordinate of the rhino:

Vx= x2/t2

-3.20= x2/10

x2= -32m

Position of y-coordinate of the rhino:

Vy= y2/t2

5.40= y2/12

y2= 64.8 m

Now the distance from the origin:

s=[tex]\sqrt{x2^{2} +y2^{2} }[/tex]

s=[tex]\sqrt{(-32)^{2} } + (64.8)^{2} \\[/tex]

s=[tex]\sqrt{1024}+ 4199.04[/tex]

s=72.27 m

Learn more about displacement:

brainly.com/question/29307794

#SPJ4

a student has built a 10-cm-long pinhole camera for a science-fair project. she wants to photograph her friend, who is 180 cm tall, and have the image on the film be 5 cm high. how far should the front of the camera be from her friend

Answers

The distance between both the student's friend and camera is d = 360 cm or 3.6 m.

What is the structure of light?

Light not only moves in waves; it also moves with a flow of small particles. Scientists call these tiny particles of light as photons. The packets contain the energy which makes up the energy of the light. The scientists measure something called the relative energy for different types of light.

The light traveling in any one direction in a straight line is called a ray of light. Meanwhile, a group of light rays given out from a source is called a beam of light.

In this case, camera’s height was 10 cm.

The height of student's friend was 180 cm.

That picture on camera has a length of 5 cm.

Now, let d represent the space among both the friend and device's face. Its identical triangles as in figure attached show how the lengths were connected.

So, to find out the distance, we can use the following equation:

5 cm / 10 cm = 180 cm / d

d = 10 cm * 180 cm / 5 cm

d = 360 cm

d = 3.6 m

Hence, the distance among both the friend and device's face is 360 cm or 3.6 m.

Learn more about structure of light at: https://brainly.com/question/29428653

#SPJ4

why might the unemploymeht rate cometimes increase when the pace of job creation exceeds the increase in population

Answers

The unemployment rate is a measure of the percentage of the labor force that is currently unemployed and actively seeking employment. When the pace of job creation exceeds the increase in population, it would be expected that the unemployment rate should decrease, as there are more job opportunities available for job seekers.

It's important to note that unemployment rates are often subject to seasonal fluctuations, with certain times of the year seeing more job losses than others. For example, there may be a decrease in employment in certain industries during the winter months, or during the summer months when school is out. These seasonal fluctuations can lead to temporary increases in unemployment rates, even if job creation is occurring.

To know more about Job creation, here

https://brainly.com/question/30573111

#SPJ4

suppose that 2 j of work are needed to stretch a spring from its natural length of 30 cm to a length of 42 cm. how much work (in j) is needed to stretch it from 35 cm to 40 cm?

Answers

The work needed to stretch the spring from 35 cm to 40 cm is 0.35 Joule. The result is obtained by using the formula for potential energy of a spring.

How to count the potential energy of a spring?

The potential energy can be expressed as

P.E = ½kx²

Where

k = spring constantx = spring displacement

Suppose that 2 J of work are needed to stretch a spring from its natural length of 30 cm to a length of 42 cm. Find work (in Joule) is needed to stretch it from 35 cm to 40 cm!

We have P.E₁ = 2 J when

x₁ = (42 - 30) cm

x₁ = 12 cm

x₁ = 0.12 m

The spring constant is

P.E₁ = ½kx₁²

2 = ½k(0.12)²

4 = 0.0144k

k = 277.77

k ≈ 278 N/m²

When it stretches for

x₂ = (40 - 35) cm

x₂ = 5 cm

x₂ = 0.05 m

The work needed will be

P.E₂ = ½kx₂²

P.E₂ = ½(278)(0.05)²

P.E₂ = 139(0.0025)

P.E₂ = 0.35 Joule

Hence, to stretch it from 35 cm to 40 cm, the work needed is 0.35 Joule.

Learn more about spring-mass system here:

https://brainly.com/question/30196303

#SPJ4

A weight hangs motionless from a spring, with a spring constant of 75 N/m. The spring stretched from its original length by 0.333 meters. How much weight hangs from the spring?

Group of answer choices

15 N

45 N

35 N

25 N

Answers

Answer:

25 N

Explanation:

You can just observe the units of the numbers given to know that

75 N/m * .333 m = 25 N

in parallel association, should the equivalent resistance be smaller or bigger than any individual resistor in the circuit? justify your answer.

Answers

The equivalent resistance is always less than the smallest resistor in the parallel network.

Then the inverse of the equivalent resistance of two or more resistors connected in parallel is the algebraic sum of the inverses of the individual resistances.

If the two resistances or impedances in parallel are equal and of the same value, then the total or equivalent resistance, [tex]R_t[/tex] is equal to half the value of one resistor. That is equal to R/2 and for three equal resistors in parallel, R/3, etc.

Note that the equivalent resistance is always less than the smallest resistor in the parallel network so the total resistance, [tex]R_t[/tex] will always decrease as additional parallel resistors are added.

To know more about the equivalent resistance, here

brainly.com/question/21538325

#SPJ4

reflects from the mirror, and reaches point b. how far below the top edge does the ray strike the mirror?

Answers

The distance below the top edge at which the ray strikes the mirror depends on the angle of incidence.

What is ray strikes?

Ray tracing is a computer graphics rendering technique for generating an image by tracing the path of light as it interacts with an object or scene. Ray tracing is capable of producing a very high degree of visual realism, including effects like reflections, refractions, and shadows.

The distance below the top edge at which the ray strikes the mirror depends on the angle of incidence. The angle of incidence is the angle between the incident ray and the normal to the mirror surface. The distance below the top edge can be found using the law of reflection which states that the angle of incidence is equal to the angle of reflection. If we denote the angle of incidence as θ and the distance below the top edge as h, then we can calculate h using the tangent of θ.

h = tan(θ) * distance from point a to the top edge of the mirror

Therefore, the distance below the top edge at which the ray strikes the mirror depends on the angle of incidence.

To learn more about ray strikes
https://brainly.com/question/29716248
#SPJ4

a 1500kg ferry boat has a momentum of 25000 kg-m/a. What is the speed of the ferry boat

Answers

The speed of the ferry boat is 16.67 meters per second.

The Pythagorean theorem is what?

At a velocity of 10.0 m/s, the boat crossed the calm sea. Un = 2.00 m/s, river water speed Let v represent the ferry's effective river crossing speed, allowing it to travel directly to the location on the opposite side. We can then express their velocities as shown below.

What made Pythagoras well-known?

Greek philosopher Pythagoras made significant contributions to mathematics, astronomy, and music theory. Although the Babylonians were aware of the theorem 1000 years before Pythagoras, he may be the first to use it.

We can use the formula for momentum:

p = mv

where p is momentum, m is mass, and v is velocity or speed.

Rearranging this formula to solve for velocity, we get:

v = p/m

Substituting the given values, we get:

v = 25000 kg-m/s / 1500 kg

v = 16.67 m/s

Therefore, the speed of the ferry boat is 16.67 meters per second.

To know more about Pythagoras visit:

brainly.com/question/28757057

#SPJ1

a 66-kg skier starts from rest at the top of a 1200-m -long trail which drops a total of 240 m from top to bottom. at the bottom, the skier is moving 11 m/s . part a how much energy was dissipated by friction?

Answers

The energy dissipated by friction is approximately 15,840 J.

The energy dissipated by friction can be calculated as the difference between the initial potential energy and the final kinetic energy.

The initial potential energy can be calculated using the formula:

PE_initial = mgh

where m is the mass of the skier, g is the acceleration due to gravity, and h is the height difference from the top to the bottom of the trail.

The final kinetic energy can be calculated using the formula:

KE_final = 0.5m[tex]v^{2}[/tex]

where v is the final velocity of the skier at the bottom of the trail.

Subtracting the final kinetic energy from the initial potential energy gives the energy dissipated by friction:

E_dissipated = PE_initial - KE_final

Using the given values, the energy dissipated by friction can be calculated as approximately:

E_dissipated = (66 kg)×(9.8 m/[tex]s^{2}[/tex])×(240 m) - 0.5×(66 kg)×[tex](11 m/s)^{2}[/tex] = 15,840 J.

Therefore, the energy dissipated by friction is approximately 15,840 J.

Learn more about friction:

brainly.com/question/28356847

#SPJ4

Other Questions
Is 20 - 5x = 50- 10x true ? Compare using >,, convert 720 kilograms into tons. Round to the nearest hundredth A sample of 0.53 gNaCO3, is added to 101 ml of 0.1 N HSO4 solution. a. Will the resulting b solution be acidic, basic or neutral? HELPThe mean daily pocket money of 35 pupils in another class is m cents. Given that the mean daily pocket money of the 80 pupils from these two classes is 72.25 cents, calculate the value of m. What is one of the NASAs flagship satellites and what is it studying about our planet? describe an atom: atoms are the basic units of matter. an atom has a dense containing positive and neutral surrounded by mostly empty and negative in the electron adam is standing next tot he palmetto building in columbia, south carolina. he is 6 feet tall and the length of his shadow is 9 feet. if the length of the shadow of the building is 322.5 feet, how tallis the building? Given: number of free throws made by a basketball player varies directly withnumber of attempts the player has. If she makes 12 out of 40 attempts, howmany would she make during the season if she had 135 total attempts? the first step in an involuntary resocialization process in which individuals are stripped of their former selves through practices such as being denied privacy and being assigned institutional clothing is referred to as If an increase in the price of a good has no impact on the total revenue in that market, demand must be: __________ URGENT!! ILL GIVEBRAINLIEST! AND 100 POINTS Which of the following elements is false regarding Phase 3, Limited Integration, of supply management strategy development?a. Supplier quality focus.b. Global sourcing.c. Ad hoc supplier alliances.d. Volume leveraging.e. Long-term contracts. What is population interaction between species? Thunderbird Amusement ParkBalance Sheet as of June 30 Assets: 2007 | 2008 Cash $13,221 |$ 11,729 Accounts receivables 31,323 | 37,909 Inventory 77,244 | 91,617 Total current assets $121,788 | $141,255 Fixed Assets 444,712 | 563,255 Less: AD (100,000 | (172,487) Net fixed assets 344,712 | 390,836 Total assets $466,500 | $532,091 Liabilities and Stockholders' Equity: Accounts payable $38,549 | $42,881 Notes payable 12,004 | 16,753 Deferred taxes 21,934 | 16,788 Total current liabilities $ 72,487 | $76,422 Long-term debt 78,445 | 61,290 Common stock 125,000 | 175,000 Retained earnings 190,568 | 219,379 Total liabilities and stockholders' equity $466,500 | $532,091 The company had a net income of $248,462, and depreciation expenses were equal to $72,487. What is the firm's cash flow from financing activities? Given that someone has $5,000 in debt, the monthly payment is $75, and the interest rate is 16% per year, how long will it take to pay off the debt? Please show as much work as possible. The formula is attached if you need it. I will mark you as brainliest. General Sherman, a tree located in Sequoia National Park, stands 275 feet tall. To see the top of the tree, Carlos looks up at a 15 angle of elevation. If Carlos is 6 feet tall, how far is he from the base of the tree to the nearest foot? There are 4 options A.1004 B.1020 C.1026 D.1049 jack corporation has a profit margin of 9.70 percent, total asset turnover of 1.49, and roe of 18.70 percent. what is the firm's debt-equity ratio? what position did the populist party take on laissez-faire economics? a. they supported laissez-faire economics because it promoted competition. b. they supported laissez-faire economics because it reinforced the gold standard. c. they opposed laissez-faire economics because it rejected government reg the function g is defined by g of x equals 3 over x period what is the instantaneous rate of change at x