Answers
Answer:
43
Explanation:
you divide 2600 by 60 and your answer is 43.3333333
I just took the quiz and got it right!
Related Questions
What type of fossils were found near Macon Georgia?
Answers
Answer:
I believe whale fossils were found.
If you hold a piece of copper wire in an open flame, which of the following will most likely happen?
The heat will travel through the wire to your hand.
The light will change into electricity.
The flame will absorb heat from the wire.
The ſame will get brighter.
Answers
Answer:
The heat will travel through the wire to your hand.
Explanation:
Thats the one that makes the most sense.
Why is the sunlight not deflected when passes through either an electric field or a magnetic field?
Answers
Who? What? Where? When? Why?
Answers
Give reasons.
A stone thrown upward returns back to the earth surface.
Answers
Answer:
Gravity
Explanation:
Due to earths gravity, anything that goes into the air returns back to the surface unless it is given the ability to fly.
Hope this helps!
is it better to walk or run in the rain?
Answers
Answer:
Not gonna lie. I actually had to think about this a lot XD
Running in the rain can cause you to slip and get hurt. Which I think isn't what you would want.
Walking in the rain (although it is sad), is actually a better idea than running.
Hope this helps!
Answer:
Walk
Explanation:
Running might stop you from being outside for as long, but running on wet ground will most likely result in a not-so-graceful faceplant.
Question 11(Multiple Choice Worth 3 points)
(01.01 LC)
Which of the following actions will decrease the gravitational force between two objects?
o
Increasing the mass of the objects
d
Increasing the density of the objects
O
Increasing the distiyance between the objects
Increasing the temperature of the objects
Answers
Answer:
Explanation:
The only thing that decreases the gravitational pull between 2 objects is if you increase the distance.
The formula is F = G*m*m/r^2
As r^2 gets larger and G and m1 and m2 remain the same, F has to get smaller because r^2 divides into G*m1*m2
If the length of an ax is 20 cm and the width is 5 cm what is the MA of a knife?
O 2
0 4
O 10
O6
Answers
Answer:
4
Explanation:
From the question given above, the following data were obtained from:
Length of an axe = 20 cm
Width = 5 cm
Mechanical advantage (MA) =.?
The mechanica advantage is simply defined as the ratio of the length to the width of the axe. Mathematically, it is expressed as:
Mechanical advantage = length /width
With the above formula, we can obtain the mechanical advantage of the axe as follow:
Length of an axe = 20 cm
Width = 5 cm
Mechanical advantage (MA) =.?
MA = 20/5
MA = 4
Therefore, the mechanical advantage (MA) of the axe is 4
A graph of kinetic energy vs the mass of an object is ______________?
Answers
Answer:
The shape of the MASS vs ENERGY graph has a NON-LINEAR RELATIONSHIP.
Explanation:
Your Welcome Friend! :)
A graph of kinetic energy vs the mass of an object is non-linear.
What is the nonlinear relationship?
Changes in the output are not proportional to changes in any of the inputs in a nonlinear connection.
When a linear connection is plotted on a graph, it produces a straight line; however, when a nonlinear relationship is plotted on a graph, it produces a curve.
When graphed, motion energy is proportional to the mass of the moving item, resulting in a linear connection, and it expands with the square of its speed, resulting in a non-linear relationship.
Hence a graph of kinetic energy vs the mass of an object is non-linear.
To learn more about the nonlinear relationship refer to the link;
https://brainly.com/question/14304469
Use the drop-down menus to order the steps for writing chemical formulas.
- Identify the elements in the compound.
- Write the chemical symbols in the order shown in the name.
- Use the periodic table to find the symbols of elements in the compound.
- Use prefixes to determine the number of each type of atom in the compound.
- Use subscripts to show the number of each type of atom in the compound.
Answers
Answer:
1,3,2,4,5
Explanation:
Because I had right
Following these steps will help write chemical formulas by identifying the elements, finding their symbols, arranging them in order, and determining the appropriate prefixes representing them with subscripts.
Here is the correct order for writing chemical formulas :
1) Identify the elements in the compound.
2) Use the periodic table to find the symbols of elements in the compound.
3) Write the chemical symbols in the order shown in the name.
4) Use prefixes to determine the number of each type of atom in the compound.
5) Use subscripts to show the number of each type of atom in the compound.
Therefore, Following these steps will help you correctly write chemical formulas by identifying the elements, finding their symbols, arranging them in the correct order, determining the appropriate prefixes for the number of atoms, and representing them with subscripts.
To know more about the chemical formulas:
https://brainly.com/question/32018188
#SPJ4
A Coolie raises a box of mass 20 kg to a height of 1.5m. If the force of gravity on 1 kg is 10N. The work done by the Coolie is
Answers
Mass(m)=20kg
Displacement (s)=1.5m
For 1 kg force of gravity=10N
We have,
F=mg
or,10=1xg
or g=10m/s^2
Then,
Total work done by the coolie(W)=force x displacement
or,W=mxgxs
=20x10x1.5
=300J
What happens when light hits a transparent material like water or glass? What is
the phenomenon called?
HELP
Answers
The phenomenon where light passes through different mediums is REFRACTION
Hope this helps!
The answer pleaseeeeeee
Answers
Two forces are described below:
Force 1: The squeezing force applied to remove water from a wet cloth
Force 2: The gravitational force exerted by Earth on the moon
Which statement is true about the forces? (3 points)
Both are contact forces.
Both are non-contact forces.
Force 1 is a non-contact force and Force 2 is a contact force.
Force 1 is a contact force and Force 2 is a non-contact force.
Answers
Answer:
its Force 1 is a contact force and Force 2 is a non-contact force.
Explanation:
I took the test!
Answer:
Force 1 is a contact force, Force 2 is a non-contact force :)
Explanation:
Because Force 1 is an object touching something and Force 2 is a force that is not touching something (hope this helps)
A source of sound produce waves in air of wavelength 3.42m . If the speed of sound in air is 330m/s, What is the period of vibration?
Answers
Explanation:
wavelength=3.42m
velocity=330m/s
T=?
v=f×wavelength
f=330÷3.42
f=96.5Hz
T=1/f
=1/96.5
T=0.01s
Which of the following is the primary force that shapes the Earth's landscape?
Answers
For a balloon to rise in the air, the lifting force
must be greater than which force: Gravity,
Normal, or Friction?
Help please
Mark brainlist
Answers
Answer:
gravity
Explanation:
Please help I don’t know how to do this
Answers
Answer:
3.176 hoursExplanation:
given:
distance = 270 km
speed = 85 km/h
find:
how long does it take to get into his audition in hours?
solution:
velocity = distance / time
85 km/h = 270 km
t
85 (t) = 270
t = 270 / 85
t = 3.176 hours
True or false- Normally, all objects are electrically positively charged
Answers
A 57 kg paratrooper falls through the air. How much force is pulling him down?
Answers
Answer:
Explanation:
Force = Mass * acceleration due to gravity.
Given
Mass of the paratrooper = 57kg
Acceleration due to gravity = 9.81m/s²
Required
Force pulling him down
Substitute unto formula;
F = 57 * 9.81
Force = 559.17 N
Hence the force pulling him down is 559.17N
The force pulling the paratrooper as he falls down is 558.6 N.
The given parameters;
mass of the paratrooper, m = 57 kgacceleration due to gravity, g = 9.8 m/s²The force pulling the paratrooper is force of gravity and the magnitude can be determined by applying Newton's second law of motion as shown below;
F = mg
F = 57 x 9.8
F = 558.6 N
Thus, the force pulling the paratrooper as he falls down is 558.6 N.
Learn more here:https://brainly.com/question/19887955
3. A substance has a density of 19.3 g/ml. What is the volume of 20.2 g of the
substance? Hint: density can be used as a conversions factor
Answers
Answer:
The answer is 1.05 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question we have
[tex]volume = \frac{20.2}{19.3} \\ = 1.04663212...[/tex]
We have the final answer as
1.05 mLHope this helps you
Velocity of a car traveling in a straight line increases from 0 m/s to 30 m/s in eight seconds what is the average acceleration of the car
Answers
Average acceleration is how much the car increases (on average) per second. So, since it increases by 30 m/s in 8 s, then dividing 30 by 8 will give you an average acceleration of 3.75 m/s^2 (remember that acceleration is ever increasing, so the unit is s^2, not just s)
Types of muscle tissue includes
Skeletal muscle
Cardiac muscle
Smooth muscle
All of the above
Answers
Answer:
D. all of the above
Explanation:
hope it helps
Doctors were furious. Their patients didn't care about regular medicine anymore. All they wanted was a wave of Dr. Mesmer's wand. The doctors griped — and groused — and fussed — and fumed. What is most likely the meaning of the word furious?
A quietly curious B quite thrilled C mildly annoyed D extremely angry
Answers
Answer:
am pretty sure the answer is d
Explain why a golf ball that is hit on the moon travels much farther than a golf ball that is hit with the same force on Earth.
Answers
Answer:
the reason why is that if it is hit with the same force the moon has a lot less gravity than the earth dose so the golf ball will hit the ground on earth first before the golf ball on moon dose
2. When our sun expands and cools, it will turn into a.
Answers
Answer:
Red giant star
Explanation:
If you walk North for 40 feet and then walk East for 30 feet, what is your total distance
travelled? What is your displacement?
Answers
Answer:
The person travelled a total distance of (40+30) feet = 70 feet
Displacement= 50feet (im not positive on the displancement)
displacemeny is the shortest distance between two pionts
Explanation:
The fuel is ignited in a model rocket sitting on a launch pad, which blasts the rocket upward. The rocket goes up because: Group of answer choices air friction pushes on the escaping fuel. the downward force of gravity is less than the downward momentum of the fuel. None of the above. the fuel pushes on the launch pad. the downward force of gravity is greater than the downward momentum of the fuel.
Answers
Answer: The fuel pushes on the launch pad.
Explanation: This is a case of Newton's Third Law of Motion which states for every action in nature, there is an opposite and equal reaction.
Inside the rocket, the fuel is combusted creating a force that exerts on the launch pad by pushing it. As a reaction, the pad pushes the rocket upward, allowing it to go up. This is an example of Newton's Third Law of motion.
A child (mass Me) pulls a sled (mass Ms) holding a baby (mass m) across the snow (assume the snow is frictionless). When the child starts the sled moving the baby brother slips off the sled instead of moving with the sled. The child tries again with a slightly smaller force and the baby stays on the sled due to the friction between the baby and the sled. Write a symbolic solution for the coefficient offriction between the baby and the sled if the maximum acceleration ofthe sled for the baby to stay on the sled is a. The solution may include the variables MC: Ms, m: a and g but does not need to have all ofthem_ The computer Ivill not recognize any other variables. Do not include any numbers (or the in your answer). Fill in the blank
Answers
Answer:
symbolic solution for the coefficient of friction between the baby and the sled is
[tex] \mu = \frac{m + M_s}{m} * \frac{a}{g}[/tex]
Explanation:
From the question we are told that
The mass of the boy is [tex]M_e =[/tex]
The mass of the shed is [tex]M_s[/tex]
The mass of the baby is [tex]m[/tex]
The maximum acceleration for the baby to stay is a
Generally the frictional force between the baby and the shed is mathematically represented as
[tex]F_f = \mu N[/tex]
Here N is the normal force acting on the baby which is mathematically represented as
[tex]N = m * g[/tex]
=> [tex]F_f = \mu * m * g[/tex]
Now for the baby not the slip off the shed the frictional force between the baby and the shed must be equal to the the force applied by the child
The force applied by the child is mathematically represented as
[tex]F = [M_s+m] * a[/tex]
So
[tex] \mu * m * g = [M_s+m] * a[/tex]
=> [tex] \mu = \frac{m + M_s}{m} * \frac{a}{g}[/tex]
When two objects collide and stick together, what will happen to their speed, assuming momentum is conserved?
Answers
If they are moving in the same direction, the faster moving object will slow down and the slower moving object will speed up.
If they are moving in opposite directions the faster will slow down and the slower one will change direction.
Answer:
They will move more slowly.
Explanation:
When the two objects stick together, they can be treated like one larger mass. By increasing mass, and keeping momentum the same, velocity must decrease (a larger object moves slower if all other variables stay the same) by p = mv.