What is the volume in liters of 3.17 kg of ethylene glycol?

Equations are balanced using the idea of chemical reactions. to ensure that the reactant side and product side are in equilibrium the steps are below

Balancing chemical equations means making sure that the same number of atoms of each element are present on both sides of the equation. Here are the steps to balance a chemical equation:

It's important to keep in mind that the coefficients should be kept in their lowest whole number ratios, and you can use fractional coefficients if necessary. If the equation is already balanced, no further action needs to be taken.

Lean more about chemical equations at:

https://brainly.com/question/11231920

#SPJ1

The number of moles of hydrogen gas produced from 1.2 g of water is 0.06 moles. Then, the partial pressure of hydrogen gas is 4.9 atm.

The partial pressure of a gas in a mixture is the contribution of the gas to the total pressure of the mixture.

The molar mass of water = 18 g/mol

mass = 1.2 g

number of moles  = 1.2/18 =0.06 moles.

now the total pressure p = nRT/v

V = 0.20 L

T = 30°C =303 K

then  p = (0.06 mol × 0.082 L atm/ K mol × 303 K) / 0.20 L = 7.4 atm.

Now, 2 moles of water gives 2 moles of hydrogen gas and one mole of oxygen. Then 0.06 moles of water gives 0.06 moles of hydrogen and 0.03 moles of oxygen.

Then, mole fraction of hydrogen = 0.06/(0.03 + 0.03) = 0.66.

Partial pressure of hydrogen = total pressure × mole fraction

= 0.66 × 7.4 atm = 4.9 atm.

Therefore, the partial pressure of hydrogen gas is 4.9 atm.

Find more on partial pressure :

https://brainly.com/question/13199169

#SPJ1

Answer:

Explanation:

The velocity of electrons can be calculated using the equation v = h / (mλ), where h is Planck's constant (6.63 x 10^-34 Js), m is the mass of the electron, and λ is the wavelength of the radiation.

For sodium, the electron energy is given as Φ = 4.41 × 10–19 J. To find the velocity of the electrons, we first need to convert the energy into wavelength using the equation λ = hc / Φ, where c is the speed of light (3 x 10^8 m/s).

So, for sodium:

λ = hc / Φ = 6.63 x 10^-34 x 3 x 10^8 / 4.41 x 10^-19

λ = 290 nm.

And then using the velocity equation,

v = h / (mλ) = 6.63 x 10^-34 / (9.11 x 10^-31 x (290 x 10^-9))

For potassium, the electron energy is given as Φ = 3.68 × 10–19 J, and the wavelength can be calculated in the same way as for sodium:

λ = hc / Φ = 6.63 x 10^-34 x 3 x 10^8 / 3.68 x 10^-19

λ = 290 nm.

And then using the velocity equation,

v = h / (mλ) = 6.63 x 10^-34 / (9.11 x 10^-31 x (290 x 10^-9))

Note: m is the mass of an electron, which is 9.11 x 10^-31 kg.

So, both the velocity of the electrons from sodium and potassium would be the same, given that they are both exposed to the same wavelength radiation of 290 nm.

Answer:The velocity of electrons from sodium and potassium can be calculated using the equation E=hf, where E is the energy of the electron, h is Planck's constant and f is the frequency of the radiation.

From the equation E=hf, f can be calculated using the wavelength of the radiation:

f = c/λ

where c is the speed of light.

Then, using E=hf and the values for E (Φ) for sodium and potassium, the velocity of the electrons can be calculated using the equation:

v = sqrt(2E/m)

where m is the mass of the electron.

Explanation:

The velocity of electrons from sodium and potassium can be calculated using the equation E=hf, where E is the energy of the electron, h is Planck's constant and f is the frequency of the radiation.

From the equation E=hf, f can be calculated using the wavelength of the radiation:

f = c/λ

where c is the speed of light.

Then, using E=hf and the values for E (Φ) for sodium and potassium, the velocity of the electrons can be calculated using the equation:

v = sqrt(2E/m)

where m is the mass of the electron.

Answer :Hydrophobicity is measured in terms of the contact angle of the water drops to the surface of textiles

Explanation:

Mole is one of the International System of Units' seven foundation units, in reality (SI). Units are created when preexisting ones are insufficient. Therefore, 11.2moles of NO[tex]_2[/tex] is produced.

Simply put, a mole is a measuring unit. It's one of the International System of Units' seven foundation units, in reality (SI). Units are created when preexisting ones are insufficient.

At the same time that using official figures of atoms, molecules, or ions would be unclear, chemical reactions frequently occur at low concentrations where using grams would've been inappropriate. Therefore, the mole was created by scientists to fill the gap between extremely small and extremely huge quantities.

2N[tex]_2[/tex]O[tex]_5[/tex](g)→4NO[tex]_2[/tex](g)+O[tex]_2[/tex](g)

moles of N[tex]_2[/tex]O[tex]_5[/tex] = 5.6 mol

the mole ratio between N[tex]_2[/tex]O[tex]_5[/tex] and NO[tex]_2[/tex] is 1:2

moles of NO[tex]_2[/tex] = 2× 5.6=11.2moles

Therefore, 11.2moles of NO[tex]_2[/tex] is produced.

To learn more about mole, here:

https://brainly.com/question/14676971

#SPJ1

In the PhET activity, "Properties of Gases", when pressure is kept the same and heat the volume increases. Therefore, option D is correct.

Charles' law states that if the pressure remains constant, the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature.

This law states that a gas's volume and temperature have a direct relationship: as temperature rises, volume rises when pressure remains constant. When a gas is heated, the kinetic energy of the particles increases, causing the gas to expand.

Thus, option D is correct.

To learn more about the charle's law, follow the link;

https://brainly.com/question/16927784

#SPJ1

Explanation:

To calculate the number of oxygen atoms in a sample of 288 amu, you would need to know the atomic mass of oxygen and the chemical formula of the sample.

Assuming that the sample is made of pure oxygen (O2), the atomic mass of oxygen is 16 amu. So, 288 amu / 16 amu/atom = 18 atoms of oxygen.

The amount, in grams of KCl that will be produced, would be 5.00 grams.

KClO3 decomposes when heated to produce KCl and O2 according to the following equation:

[tex]2KClO_3 -- > 2KCl + 3O_2[/tex]

Equivalent mole of 5.0 g KClO3 = 5/122.5 = 0.0408 mol

Since the mole ratio of KClO3 to KCl is 1:1, the mole of KCl formed will also be 0.0408 mol.

Mass of 0.0408 mol KCl = 0.0408 x 122.55

                                        = 5.00 grams

In other words, the mass of KCl that would be produced is 5.00 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/29856106

#SPJ1

The molecular weight of the ascorbic acid (vitamin C), given that 0.9 g of the acid was dissolved in 95 g of water is 170.7 g/mol

We'll begin by obtaining the mole of the ascorbic acid in the solution. Details below

Mole = Molality × mass of water (in kg)

Mole of ascorbic acid = 0.0555 × 0.095

Mole of ascorbic acid = 0.0052725 mole

Finally, we shall determine the molar mass of the ascorbic acid. Details below

Molar mass = mass / mole

Molar mass of ascorbic acid = 0.9 / 0.0052725

Molar mass of ascorbic acid = 170.7 g/mol

Learn more about molar mass:

https://brainly.com/question/15874532

#SPJ1

Lead is one example of a heavy metal. Cobalt and cadmium. They belong to a class of chemicals known as "heavy metals". The answer is option (c).

Lead is one example of a heavy metal. Cobalt and cadmium. They belong to a class of chemicals known as "heavy metals." Metallic substances with a relative high density when compared to water are referred to as heavy metals. Assuming that weight and toxicity are connected, heavy metals have included metalloids like arsenic, which can cause toxicity at low exposure levels.

Although heavy metals are generally found in nature and are necessary for life, they can become poisonous when they build up in organisms. Among the heavy metals that can poison the environment, arsenic, cadmium, and mercury are the most prevalent.

To know more about heavy metals, visit:

https://brainly.com/question/5472180

#SPJ1

A + BC → AB + C "single replacement reaction" while ammonia synthesis is a "synthesis reaction".

A single replacement reaction is a reaction by which one element replaces an/another element in a compound.

It can be represented generically as: A + B-C → A-C + B This will most often occur if A is more reactive than B, thus giving a more stable product.

A chemical reaction known as a synthesis occurs when two or more simple chemicals combine to create a more complex result. The result is always a chemical, while the reactants can be either elements or other compounds.

Example: ammonia synthesis,

N₂ + 3H₂ ⇄ 2NH₃

Read more about ammonia here:

https://brainly.com/question/14854495

#SPJ1

Lewis structures are useful for visualizing both ionic and covalent bonds. In the idealized ionic bond.

In covalent bonding, nonmetallic elements part electrons so that both elements can have a full valence shell. Covalent bonds can be meant with electron dot formulas. These are often mentioned as Lewis structures and are a little different than the electron dot formulas used to constitute ionic bonds.

Lewis one atom gives up an electron to the other, forming positive and negative ions. The state for bonds is that the total structure charge is zero and that each atom must have a gentle gas electron configuration. In covalent combination, the Lewis Dot Structures must show

So we can conclude that Using Lewis structure Symbols to relate Covalent Bonding.

Learn more about Lewis's here: https://brainly.com/question/28353159

#SPJ1

The original concentration of the Pb(NO₃)₂ solution in mol/L would be 0.00036 moles / 0.64 L = 0.0000056 mol/L = 0.056 mM (rounded to 3 significant figures).

We must do a mass-to-moles conversion to ascertain the Pb(NO3)2 solution's initial concentration. The following equation describes the precipitation reaction between Pb(NO₃)₂  and H₂SO₄:

Pb(NO₃)₂ + H₂SO₄ -> PbSO₄ + 2HNO₃

PbSO₄ has a molar mass of 303.2 g/mol. 

Therefore, 0.00036 moles of PbSO₄ are equal to 0.109 g of PbSO₄  divided by 303.2 g/mol. 

Therefore, 0.00036 moles of PbSO₄ are equal to 0.109 g of PbSO₄  divided by 303.2 g/mol.  Since the ratio of Pb(NO₃)₂  to PbSO4 in the reaction is 1:1, we can infer that the initial solution included the same number of moles of Pb(NO₃)₂  

Since the ratio of Pb(NO₃)₂  to PbSO₄  in the reaction is 1:1, we can infer that the initial solution included the same number of moles of Pb(NO₃)₂   The Pb(NO₃)₂  solution's initial concentration would therefore be 0.00036 moles / 0.64 L = 0.0000056 mol/L = 0.056 mM. (rounded to 3 significant figures).

Learn more about precipitation here: brainly.com/question/18109776?

#SPJ4

The distribution coefficient measures the ratio of a compound's ionized and non-ionized species in a solution. Therefore, 1.57 is the distribution coefficient.

The distribution coefficient measures the ratio of a compound's ionized and non-ionized species in a solution of two separate immiscible phases. This phenomena can be designated as "D."

Here, water or perhaps an aqueous phase is basically one of the immiscible phases. Typically, the other phase is a hydrophobic phase that is inimical to water (or any other aqueous phase we use here). Because it is such a tiny value, we typically express it as a logarithmic value.

distribution coefficient = mass sorbed / mass of solid ÷ mass in solution/ volume of solution

distribution coefficient = 2.00g / 3.00g÷ 3.00g /70

                                    = 0.66/ 0.42

                                     =1.57

Therefore, 1.57 is the distribution coefficient.

To learn more about distribution coefficient, here:

https://brainly.com/question/29737006

#SPJ1

The intermolecular force present in butter is London dispersion forces. In kerosene, covalent bonding between carbon and hydrogen atoms are present.

Intermolecular forces are force exerted between two molecules which can be of attraction or repulsion. The intermolecular force of attraction make the atoms binded in a compound or molecule.

In butter, the hydrocarbon molecules exerts a London dispersion forces between two non-polar molecules. In kerosene, the hydrocarbon molecules are bound by covalent bonding between carbon atoms.

In ethanol, the OH group make it possible to form hydrogen bonds between ethanol molecules. In the case of calcium fluoride, dipole, dipole forces exists. Since the compound is ionic and have a permanent dipole moment.

Find more on intermolecular forces:

https://brainly.com/question/9007693

#SPJ1

New moon is when the Moon cannot be seen because we are looking at the unit half of the Moon.

The new moon phase occurs when the Moon in directly between the Earth and Sun. A solar eclipse can only happen at new moon.

A waxing crescent moon is when the Moon looks like crescent and the crescent increases ("waxes") in size from one day to the next. This phase is usually only seen in the west.

The first quarter moon (or a half moon) is when half of the lit portion of the Moon is visible after waxing crescent phase. It comes a week after new moon.

A waxing Gibbous moon occurs when more than half of the lit portion of the Moon can be seen and the shape increases ("waxes") in size from one day to the next. The waxing gibbous phase occurs between the first quarter and full moon phases.

A full moon is when we can see the entire lit portion of the Moon.

The total lunar eclipse when the Moon is on the eclipse can only happen at opposite side of the Earth from the Sun, called opposition.

A lunar eclipse can only happen at full moon.

A waxing gibbous moon occurs when more than half of the lit portion of the Moon can be seen and the shape decreases ("waxes") in size from one day to the next. The waning gibbous phase occurs between the full moon and third quarter phases. after th

The full moon generally occurs on the 14th day after the new moon phase. The full moon occurs when the position of the earth is between the moon and the sun in a relatively straight line. The entire sunlit side of the moon becomes visible so that on a full moon, the moon looks completely round and very bright.

During the full moon many parts of the Moon can be seen from Earth, and most of it is the surface form in the form of craters. Because at full moon, some of the craters on the surface of the moon look like there are emission lines coming from the center of the crater.

These lines come from the scattering of particles that were thrown up when meteorites fell to the surface of the moon and formed craters.

Learn more about full moon at

https://brainly.com/question/15024267

#SPJ1

a. 225.0 has 4 significant figures.

b. 1000.0 has 4 significant figures.

c. 0.0003210 has 6 significant figures.

d. 0.0067 has 4 significant figures.

e. 1,000,000 has 7 significant figures.

f. 2.00001 has 6 significant figures.

Question 2

a. 15.9994 rounded to three significant figures is 16.0.

b. 1.0080 rounded to three significant figures is 1.01.

c. 0.6654 rounded to three significant figures is 0.665.

d. 4885 rounded to three significant figures is 4885.

e. 87,550 rounded to three significant figures is 88,000.

f. 0.027225 rounded to three significant figures is 0.0272.

Question 3

a. 77.981 x 2.33 = 181.081 (rounded to 3 significant figures)

b. 4 x 0.0665 = 0.266 (rounded to 3 significant figures)

c. 17,344,900 + 23.1 = 17,344,923.1 (rounded to 7 significant figures)

d. 9.80 - 4.762 = 5.038 (rounded to 3 significant figures)

e. 3.9 x 6.05 x 420 = 8,595.89 (rounded to 2 decimal places)

f. 14.1 / 5 = 2.82 (rounded to 2 decimal places)

g. 1001 + 16.23 = 1017.23 (rounded to 4 significant figures)

h. 424.5 + 2.8461 = 427.3461 (rounded to 4 decimal places)

i. 9.9 - 9.54 = 0.36 (rounded to 2 decimal places)

j. 7.3778 / 0.000265 = 27,864.345 (rounded to 3 decimal places)

k. (24.358) x (6.4) = 156.3712 (rounded to 4 decimal places)

(48.6) x (0.6959) = 33.88594 (rounded to 5 decimal places)

Significant figures of a number in positional notation are described as digits in the number that are reliable and necessary to indicate the quantity of something.

Decimal places on the other hand are described as positions of the digits to the right of a decimal point. Rounding numbers to decimal places is shortening a decimal number to a given degree of accuracy.

Learn more about Significant figures at:  https://brainly.com/question/24630099

#SPJ1

The number of molecules for 229 mg

The atomic mass from

Molecular mass is the sum of all the atomic mass in the compound.

According to Stoichiometry to calculate the number of moles of a compound

n = m ÷ M

X = n × L

Calculating the number of molecules

Learn more about number of molecules here: https://brainly.com/question/30193523

#SPJ1

False, using changes in tempo and dynamics can make a musical cliché more effective. Hence, option C is correct.

Tempo in a music refers to pace of the music especially in high pitch sound waves. The most common unit of measurement for tempo is beats per minute (BPM), which is just the quantity of beats that may be captured in a minute at a certain pace.

A musical segment or composition is slower when the beats per minute  is lower than when the BPM is greater. While a higher BPM is more likely to make the listener feel excited, a lower BPM is more likely to have a calming and/or sad effect on the listener.

Changing dynamics is some more effective way to make musical cliché. Hence, option C is correct.

Find more on musical tempo:

https://brainly.com/question/29574317

#SPJ1

The mass of sulfur in a sample of CaSO4 with a mass of 67.0 g would be 15.73 grams.

11.5 grams of CaSO4 contains 3.39 grams of Ca and 5.41 g of O.

Mass of sulfur = 11.5 - (3.39 + 5.41) = 2.7 grams

11.5 grams of CaSO4 contains 2.7 grams of sulfur. The mass of sulfur in 67.0 grams of CaSO4 can be estimated as:

11.5 grams CaSO4 = 2.7 grams S

67.0 grams CaSO4  = 67.0 x 2.7/11.5

                                 = 15.73 grams

In other words, if 11.5 grams of CaSO4 contains 2.7 grams of S, then 67.0 grams will contain 15.73 grams of sulfur.

More on dimensional analysis can be found here: https://brainly.com/question/30303546

#SPJ1

When a cracker dissolves in your mouth, then this is a chemical change. A chemical reactions is an atomic rearrangement-based chemical process.

An alteration of one or more compounds as one or maybe more new and distinct substances is referred to as a chemical change or chemical reaction. In other terms, a chemical reactions is an atomic rearrangement-based chemical process.

A chemical change normally cannot be reversed unless through additional chemical processes, although a physical change may frequently be done so. The power of the system changes when a chemical shift takes place. When a cracker dissolves in your mouth, then this is a chemical change.

Therefore, when a cracker dissolves in your mouth, then this is a chemical change.

To learn more about chemical change, here:

https://brainly.com/question/29760166

#SPJ1

The ion concentration of 0.05 M [tex]CaCl_2[/tex] would be 0.05 mol Ca ions and 0.1 mol Cl ions respectively.

[tex]CaCl_2[/tex] contains two ions according to the following equations:

[tex]CaCl_2 -- > Ca^{2+} + 2Cl^-[/tex]

1 mole           1 mole   2 moles

0.05 M CaCl2 contains 0.05 moles of the solute in 1 liter of the solution. Thus, the equivalent mole of Ca ion would be 0.05 moles while that of Cl ion would be 0.10 mole (0.05x2).

Concentration of Ca ions = 0.05 moles

Concentration of Cl ions = 0.05 x 2 = 0.010 moles

In other words, the ion concentrations of 0.05 M CaCl2 would be 0.05 moles of Ca ions and 0.10 moles of Cl ions.

More on ion concentrations can be found here: https://brainly.com/question/12726151

#SPJ1

One mole or 12 g of carbon reacts with one of oxygen molecule weighs 32 g will produce one mole of carbon dioxide. One mole of carbon dioxide weighs 44 g.

Carbon dioxide is an inorganic gas formed by the covalent bonding between carbon and oxygen gas. Carbon dioxide is an essential gas to maintain the living atmosphere in earth.

The balanced chemical equation of the reaction between oxygen gas and carbon is given below:

[tex]\rm C+O_{2} \rightarrow CO_{2}[/tex]

As per this equation, one mole of carbon reacts with one mole of oxygen gas:

Atomic mass of carbon = 12g

molecular mass of oxygen = 32 g

then molar mass of carbon dioxide = 32+ 12 = 44 h=g.

Therefore, 44 g of carbon dioxide is produced in this reaction.

Find more on CO₂:

https://brainly.com/question/29827893

#SPJ1

1) number of valence electrons

2) number of principal energy levels

The periodic table is a tabular arrangement of the chemical elements, organized on the basis of their atomic number, electron configurations, and chemical properties. It is a useful tool for predicting the chemical behavior of an element and helps in understanding the relationships between elements and their chemical and physical properties.

The periodic table consists of rows and columns, where each element is placed in a specific position based on its atomic number and electron configuration. The elements in the same row (period) have similar electron configurations and exhibit similar chemical behavior, while the elements in the same column (group) have similar chemical and physical properties.

Learn more about the periodic table:https://brainly.com/question/11155928

#SPJ1

Photosynthesis is the process in which plants use sunlight, water, and carbon dioxide to make oxygen and energy in the form of sugar. During each step of photosynthesis that is Sunlight absorption, Light-dependent reactions, Light-independent reactions explain in below description.

Sunlight absorption: Special pigments in photosynthetic cells absorb light energy. Plant pigment molecules absorb light with wavelengths ranging from 400 nm to 700 nm. This wavelength range is known as photosynthetically active radiation (PAR).

Light-dependent reactions: Light energy is used in light-dependent reactions to create two molecules required for the next stage of photosynthesis: the energy storage molecule ATP and the reduced electron carrier NADPH. Light reactions occur in the thylakoid membranes of chloroplast organelles in plants.

Light-independent reactions: Photosynthesis's light-independent reactions occur within the stroma. It contains enzymes that, in collaboration with ATP and NADPH, "fix" carbon from carbon dioxide into molecules that can be used to make glucose. The stroma also stores the chloroplast's own genetic material.

Thus, These are the steps of photosynthesis.

To learn more about the photosynthesis, follow the link;

https://brainly.com/question/29775046

#SPJ1

In the electrolysis of brine, the gas collecting in the tube above the anode will be chlorine gas, which is greenish yellow in color.

Electrolysis is a process where an electric current is passed through a solution containing ions (called an electrolyte) to bring about a chemical reaction. This reaction splits the electrolyte into its component ions and distributes them to the electrodes (anode and cathode) connected to the source of electric current.

At the anode, negatively charged ions (anions) gain electrons and become neutral, while at the cathode positively charged ions (cations) lose electrons and become neutral. Chlorine gas is greenish yellow in color due to its chemical properties. When chlorine gas is formed at the anode during the electrolysis of brine, it is produced as a result of the oxidation of chloride ions (Cl-) present in the brine solution.

Learn more on electrolysis here: https://brainly.com/question/12994141

#SPJ1

Ca(C2H3O2)2 has 30.41% carbon by volume, according to calculations.

By dividing the atomic mass of the element by the molar mass of the compound, then by 100%, one can get the percentage of the element in a compound.

The percentage form of the mixture is obtained by multiplying this ratio by 100.

By dividing the atomic mass of the element by the molar mass of the compound, then by 100%, one can get the percentage of the element in a compound.

Atomic mass of C divided by the molar mass of Ca(C2H3O2) yields the percentage of carbon.

₂ × 100%

Ca(C2H3O2)2 has an atomic mass of 40 plus (24 plus 3 plus 32).

2 = 158g/mol \s % C = 12.01(4)/158 × 100 \s % C = 30.41%.

To learn more about percentage composition refer to:

brainly.com/question/11952337

#SPJ1

The nitrite and sulfite ions would change the colour after the addition of acidified potassium permanganate. Therefore, option A and D are correct.

An ion is a positively charged atom or molecule. It is charged because the number of electrons in the atom or molecule does not equal the number of protons.

Depending on whether the number of electrons in an atom is greater or less than the number of protons in the atom, an atom can acquire a positive or negative charge.

When potassium permanganate crystals are dissolved in water, a purple solution is formed. It is a strong oxidizing agent that does not produce toxic byproducts. It's usually made from other minerals like manganese oxide.

Thus, option A and D are correct.

To learn more about the ion, follow the link;

https://brainly.com/question/14982375

#SPJ1

The balanced chemical equation for the reaction is:

N2SO4 + 2NaOH → Na2SO4 + 2H2O

From the equation, we can see that for every 1 molecule of sodium sulfate (Na2SO4), 2 molecules of water (H2O) are produced. Therefore, to find the number of molecules of water produced, we need to determine the number of molecules of sodium sulfate produced in the reaction.

To do this, we need to use the molar mass of sodium sulfate and Avogadro's number. The molar mass of sodium sulfate is 142.04 g/mol, and Avogadro's number is 6.022 x 10^23.

The number of molecules of sodium sulfate produced in the reaction can be calculated as follows:

(2.0 g) / (142.04 g/mol) = 0.01405 mol

And the number of molecules of water produced can be calculated as follows:

0.01405 mol x 2 molecules/mol = 0.0281 x 6.022 x 10^23 molecules/mol = 1.69 x 10^23 molecules

Round 1.69 to 2.0 and your answer is  2.0 x 1023 molecules