what is the concentration of H in a solution with ph 4? answer should be in units of M. do not round.

The mass in g of agarose required to make 200 ml of a 1.2% agarose gel is 2.4 g.

Agarose gel is defined as a three-dimensional matrix which is formed from helical agarose molecules in supercoiled bundles that are aggregated into three-dimensional structures with channels and pores through which biomolecules can pass.

Agarose gel electrophoresis is the main use of agarose gel which has proven to be an efficient and effective way of separating nucleic acids.

1.2% refers that 1.2 g of agarose is required to make 100 ml of agarose gel.

So, 200 ml of agarose gel will require 2.4 g of agarose.

Learn more about agarose gel from the link given below.

https://brainly.com/question/5661562

#SPJ4

There are several units for distance, but the most commonly used unit in the International System of Units (SI) is the meter (m). The meter is defined as the distance traveled by light in a vacuum during a time interval of 1/299,792,458 of a second.

What is Distance?

Distance is a measure of the amount of space between two points. It is the length of the path taken by an object or person moving from one point to another, regardless of the direction taken. Distance is a scalar quantity, meaning it has magnitude but not direction.

Distance can be measured using a variety of units, such as meters, kilometers, miles, or feet, depending on the context and the scale of the distance being measured. For example, we might measure the distance between two cities in kilometers, the distance between two buildings in meters, or the distance between two points on a map in miles.

Other units for distance include:

Kilometer (km): 1,000 meters

Centimeter (cm): 1/100th of a meter

Millimeter (mm): 1/1,000th of a meter

Micrometer (µm): 1/1,000,000th of a meter

Nanometer (nm): 1/1,000,000,000th of a meter

There are also larger units for distance, such as the astronomical unit (AU) which is used to measure distances within the solar system.

Learn more about Distance from given link

https://brainly.com/question/26550516

#SPJ1

If you have 0.0102 moles of CaCl2, how many moles of Na2CO3 are necessary to reach stoichiometric quantities. 1.08g of Na₂CO₃ are necessary to reach stoichiometric quantities.

The term stoichiometric quantity is defined as the amount of product or reactant specified by the coefficients in a balanced chemical equation.

The balanced chemical reaction is as follows:

CaCl₂ + Na₂CO₃ → 2NaCl + CaCO₃

1 mole of CaCl₂ reacts per mole of Na₂CO₃

For calculate how many moles of CaCl2•2H2O are present in 1.50 g.

To solve this question we must find the moles of CaCl2•2H2O using its molar mass (147.0146g/mol).

These moles = Moles CaCl₂ = Moles of Na₂CO₃ necessaries to reach stoichiometric quantities.

To find then the mass we must use molar mass of Na₂CO₃ (105.99g/mol):

Moles CaCl₂.2H₂O:

1.50g × (1mol / 147.0146g)

= 0.0102 moles CaCl₂.2H₂O

= 0.0102moles CaCl₂

Moles Na₂CO₃:

0.0102 moles Na₂CO₃

Mass Na₂CO₃:

0.0102 moles × (105.99g / mol)

= 1.08g of Na₂CO₃ are present

Thus, 1.08g of Na₂CO₃ are necessary to reach stoichiometric quantities.

To learn more about the stoichiometry quantity, follow the link;

https://brainly.com/question/9743981

#SPJ1

Answer:The mass of 12 M&Ms can be calculated by multiplying the average mass of an M&M (0.625 g) by the number of M&Ms (12):

0.625 g * 12 = 7.5 g

The answer should be reported to three significant figures, so it would be 7.5 g.

There are no significant figures associated with 12 M&Ms because it is a whole number and does not have any uncertainty. Significant figures are used to indicate the degree of accuracy or precision of a measurement, and whole numbers are considered to be exact values without any uncertainty.

Explanation:

Iron has four naturally occurring isotopes: iron-54, iron-56, iron-57, and iron-58 are mentioned below.

What is isotope ?

The element's isotopes, though they belong to the same family of elements, differ in the number of neutrons they contain. According to the Periodic Table, an element's atomic number is based on how many protons it has.

What is iron ?

Several processes in our bodies require iron. Hemoglobin, a protein formed in part of iron, is one that carries oxygen from the lungs to every cell in the body. It helps our muscles retain and use oxygen. Iron is also found in a wide variety of other proteins and enzymes. Your body needs the recommended dosage of iron.

Least abundance means having least percentage , So iron-58 is 0.28% hence iron-58 is least abundant isotope of iron.

Most abundant means having highest percentage, so iron-56 is 91.72% ,hence most abundant isotope.

Therefore, Iron has four naturally occurring isotopes: iron-54, iron-56, iron-57, and iron-58 are mentioned above.

Learn more about isotope from the given link.

https://brainly.com/question/364529

#SPJ1

a. The amount of saltwater in the 11% solution is 2.86 liters.

b. The amount of saltwater in the 34% solution is  6.8 liters.

c. The total amount of solution in the mixture is  46 liters.

d. The amount of saltwater in the mixture is  9.66 liters.

e. The pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

To solve this problem, we need to use a system of two equations in two variables. Let x be the amount of the 11% solution and y be the amount of the 34% solution. Then we have:

a. The amount of saltwater in the 11% solution = 0.11x

b. The amount of saltwater in the 34% solution =  0.34y

c. The total amount of solution in the mixture is 46 liters, so we have the equation x + y = 46.

d. The amount of saltwater in the mixture is the sum of the amount of saltwater in the 11% solution and the amount of saltwater in the 34% solution. This is given by 0.11x + 0.34y = 0.21(46) = 9.66.

So we have the system of equations:

x + y = 46

0.11x + 0.34y = 9.66

To solve this system, we can use substitution or elimination. Here we will use elimination:

Multiply the first equation by 0.11:

0.11x + 0.11y = 5.06

Subtract this from the second equation:

0.23y = 4.6

y = 20

Substitute y = 20 into the first equation:

x + 20 = 46

x = 26

Therefore, the pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

So,

a. The amount of saltwater in the 11% solution is 0.11x = 0.11(26) = 2.86 liters.

b. The amount of saltwater in the 34% solution is 0.34y = 0.34(20) = 6.8 liters.

c. The total amount of solution in the mixture is x + y = 26 + 20 = 46 liters.

d. The amount of saltwater in the mixture is 0.21(46) = 9.66 liters.

e. The pet store owner needs 26 liters of the 11% solution and 20 liters of the 34% solution.

Learn more about amount of saltwater in the 11% solution here:https://brainly.com/question/21078392

#SPJ1

Answer:20

Explanation:

One mole of sodium contains 6.02 × 10²³ Na atoms. Therefore, 3.25 moles of sodium contains 1.95 × 10²⁴ Na atoms.

One mole of a substance is its amount containing 6.02 × 10²³  atoms or molecules. This number is called Avogadro number. One mole of every elements contains Avogadro number of atoms.

Similarly one mole of every compound contains 6.02 × 10²³  molecules. Mass of one mole of an element is called its atomic mass. The mass of one mole of compound is called its molar mass.

No.of atoms in 3.25 moles of Na  = 3.25    × 6.02 × 10²³  = 1.95 × 10²⁴

Hence, there will be  1.95 × 10²⁴ Na atoms in 3.25 moles of Na.

Find more on Avogadro number:

brainly.com/question/11907018

#SPJ1

Primary alcohols and alkynes can be oxidized to give carboxylic acid products.

Addition of an oxidizing agent such as potassium permanganate (KMnO4) to acidic, alkaline, or neutral media shows the oxidation of primary alcohols to carboxylic acids. Aldehydes can be converted to carboxylic acids by using mild oxidizing agents. Oxidation of primary alcohols is a common method for the synthesis of carboxylic acids.

RCH2OH → RCOOH. This requires strong oxidants, most commonly chromic acid (H2CrO4), potassium permanganate (KMnO4), and nitric acid (HNO3). Primary alcohols and aldehydes are typically oxidized to carboxylic acids with potassium dichromate(VI) solution in the presence of dilute sulfuric acid.  

Learn more about oxidizing

brainly.com/question/29458295

#SPJ4

For ³₁H and ³₂He, Protons are NOT equal, Electrons are not equal, Neutrons are not equal and for ¹⁴₇N and ¹⁵₇N, Protons are Not equal, Electrons are Not equal, Neutrons are equal.

Atomic isotopes are frequently represented by the nuclear symbol. Isotopes are different versions of an element's atoms. In comparison to other atom types, isotopes contain a varied number of neutrons.

Three components make up the nuclear symbol: the element's symbol, the atomic number, and the mass number. The usual notation for an element's nuclear symbol is anX, where an is the element's mass number and n (or frequently z) is the atomic number.

The total number of protons and neutrons in the atom's nucleus is represented by the mass number, or a.

The quantity of protons in an atom's nucleus, or "atomic number," is known.The amount of neutrons in the isotope determines the difference between the mass number and the atomic number.

The hyphen notation is another symbol used to signify isotopes. The element's name, a hyphen, and the isotope's mass number are used in this notation. For instance, the isotope 126C can alternatively be written as carbon - 12 when employing the hyphen notation.

Learn more about Neutrons here:

https://brainly.com/question/5084702

#SPJ4

If 546 mol of octane combusts,102772.3 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.

The ideal gas law states that the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant.

It is represented by PV = nRT

Given:

Moles of octane = 546 moles

According to the given reaction:-

2C8H18(l)+25O2(g)⟶16CO2(g)+18H2O(l)

2 moles of octane on reaction produces 16 moles of carbon dioxide

1 mole of octane on reaction produces 16/2 moles of carbon dioxide

546 moles of octane on reaction produces 8 × 546 moles of carbon dioxide

Moles of carbon dioxide = 4368 moles

Given:  

Pressure = 0.995 atm

Temperature = 12.0 °C

The conversion of T( °C) to T(K) is shown below:

T(K) = T( °C) + 273.15  

T₁ = (12.0 + 273.15) K

= 285.15 K  

By using ideal gas equation as:

PV=nRT

where,  

P is the pressure

V is the volume

n is the number of moles

T is the temperature  

R is Gas constant having value = 0.0821 L.atm/K.mol

Applying the equation as:

0.995 atm × V = 4368 mol × 0.0821 L.atm/K.mol × 285.15K  

V = 102772.3

Thus, If 546 mol of octane combusts,102772.3 L volume of carbon dioxide is produced at 12.0 ∘C and 0.995 atm.

To learn more about an ideal gas equation, follow the link;

https://brainly.com/question/28837405

#SPJ1

Answer:

Explanation:

Here is a labeled data table for recording sand and water temperatures at various points:

Point Sand Temperature (°C) Water Temperature (°C)

1  

2  

3  

4  

5  

The table is 5 columns wide and 3 rows long, with the first column labeled "Point" to indicate the location being observed, and the second and third columns labeled "Sand Temperature (°C)" and "Water Temperature (°C)" respectively to indicate the type of temperature being measured. The cells under the "Sand Temperature (°C)" and "Water Temperature (°C)" columns are left blank to allow the experimenter to record the corresponding temperature readings for each point.

The rate laws of the following elementary reactions are:

The rate of a chemical reaction is a measure of how quickly a reaction occurs. It is usually expressed as the change in concentration of a reactant or product per unit time. The rate of a reaction is affected by a number of factors, including temperature, concentration of the reactants, surface area of the reactants, and the presence of catalysts.

Learn more about elementary reactions:

https://brainly.com/question/14234763

#SPJ4

14 electrons in an atom could have these sets of quantum numbers ℓ=3.  Quantum numbers are eigenvalues of operator

Quantum numbers are used in quantum chemistry and physics to explain the values of state maintains in the dynamic of either a quantum system. Quantum numbers are eigenvalues of operator that commute with Harmonic oscillator that may be known with accuracy while also knowing time as the program's energy as well as eigenspaces.

A description of every one of the quantum numbers of such a quantum system, when combined, completely characterizes the system's basic state and may, in theory, be measured collectively. ,ℓ=3 represents f subshell, which can occupy total 14 electrons.

Therefore, ,ℓ=3 represents f subshell, which can occupy total 14 electrons.

To learn more about quantum numbers, here:

https://brainly.com/question/2193783

#SPJ1

A homogenous mixture varies from a heterogenous mixture in that a homogenous mixture has properties that do not vary in the mixture. The correct answer is A.

A homogeneous mixture is a mixture in which the properties and composition are uniform throughout the mixture. This means that if you took a sample from any part of the mixture, you would find the same properties and composition in that sample as you would find in the entire mixture.

In contrast, a heterogeneous mixture is a mixture in which the properties and composition vary throughout the mixture. For example, a salad is a heterogeneous mixture because you can see different ingredients such as lettuce, tomatoes, and croutons, each with different properties and composition.

So, in a homogeneous mixture, the properties do not vary, while in a heterogeneous mixture, the properties vary throughout the mixture.

Learn more about homogenous mixture here: https://brainly.com/question/1307383

#SPJ4

The law of definite proportion best explains this phenomenon.

Heptane has been reported to constantly contain 84% carbon and 16% hydrogen. This indicates that heptane will always contain 84% carbon and 16% hydrogen, regardless of where it was produced or how it was produced. This accords with the law of definite proportion, which stipulates that regardless of the compound's origin or the chemical reaction that created it, a given compound will always contain its constituents in an unaltered mass ratio.

The law of definite proportions, commonly referred to as Proust's law or the rule of constant composition, holds that a chemical compound's constituents are always present in a predetermined ratio regardless of the source or method of synthesis (by mass).

The law of definite proportion serves as an example of this.

To know more about atomic theory

https://brainly.com/question/25176189

#SPJ4

Chloromethane and methanol are both capable of exhibiting hydrogen bonding, while methane does not.  The correct answer A and B.

Chloromethane and methanol both contain hydrogen atoms that are covalently bound to a more electronegative atom (chlorine and oxygen, respectively), which creates a partial positive charge on the hydrogen atom. This partial positive charge can interact with a partial negative charge on a nearby molecule, forming a hydrogen bond.

When hydrogen bonding occurs, the hydrogen atom acts as a bridge between two molecules, allowing them to interact and creating a strong bond. The hydrogen bond is formed when the partial positive charge on the hydrogen atom interacts with a partial negative charge on an electronegative atom of a nearby molecule.

Learn more about hydrogen bonding:

https://brainly.com/question/1420470

#SPJ4

%Protein = (Protein content in Milk / Total Weight of Milk) x 100

%Phosphate = (Phosphate content in Milk / Total Weight of Milk) x 100

%Fat = (Fat content in Milk / Total Weight of Milk) x 100

Define weight?

Weight is a measure of the force of gravity on an object. It is the amount of mass an object has and is usually measured in kilograms (kg) or pounds (lbs). Weight is related to mass, but not the same; mass is the amount of matter in an object, while weight is a measure of the strength of gravity on that object. Weight is a vector quantity, which means it has both magnitude and direction. Weight is an important factor to consider when designing objects and structures, as it affects how much a material can support and the amount of stress it can withstand.

To learn more about weight

Here: https://brainly.com/question/229459

#SPJ1

The theoretical yield of methoxy benzaldehyde is 1.47 g.

We must determine the quantity of p-methoxybenzyl alcohol consumed in the process in order to compute the theoretical yield of methoxy benzaldehyde.

The amount of methoxy benzaldehyde produced will be equal to the amount of p-methoxybenzyl alcohol consumed in the reaction because it is the limiting reactant.

Because the molar mass of 1.5 g of p-methoxybenzyl alcohol is 138.15 g/mol, its moles can be computed as follows:

moles of p-methoxybenzyl alcohol = 1.5 g / 138.15 g/mol = 0.0108 mol

Methoxy benzaldehyde's theoretical yield can be computed as follows:

Theoretical yield (g) = p-methoxybenzyl alcohol moles × the methoxy benzaldehyde molar mass (g/mol) = 0.0108 mol x 136.15 g/mol, or 1.47 g.

To Learn More About methoxy benzaldehyde click

brainly.com/question/14414155

#SPJ4

When pseudomonas uses nitrate as a final electron acceptor in anaerobic respiration. Here the statement which is wrong is they require light. Option e is the correct answer.

Pseudomonas can survive both in aerobic and anaerobic conditions as it is capable of both aerobic and anaerobic respiration. The process require an electron donor. Nitrate ion acts as the donor. Nitrite ions are produced during anaerobic respiration. Nitrate reductase convert nitrates to nitrites.

This process does not require oxygen because nitrate acts as the electron donor. This process yield less ATP compared to aerobic respiration.

So the statement which is not true is option e. They require light.

For more information regarding anaerobic respiration, kindly refer

https://brainly.com/question/12605249

#SPJ4

The correct answer is "4".There are four  neighboring hydrogen atoms are there to the hydrogen atoms that produce signa CAs per the graph, signal C is spitted into quartet (i.e. four part).

According to given [tex]^{1}H[/tex] NRM spectrum:

Signal C is spitted into four numbered as 2.50, 2.45, 2.40, and 2,35.

It started from 2.50 and ended at 2.35, the difference is of 2.03.

So, As per the graph, signal C is spitted into quartet (i.e. four part).

Therefore, Among all the options of 3, 4, 4, 6, 2; there are four  neighboring hydrogen atoms are there to the hydrogen atoms that produce signa C.

Full question:

Consider the below 1H NMR spectrum. How many neighboring hydrogen atoms are there to the hydrogen atoms that produce signa C?

A) 3

B) 5

C) 6

D) 4

E)  2

To know more about hydrogen atoms:

brainly.com/question/130662

#SPJ4

The ph meter should be settled down, after that only it can able analyse it.

What is ph ?

A determination of how acidic or basic a substance or solution is. Calculating pH involves using a scale from 0 to 14. On this scale, a pH of 7 indicates neutrality, which means it is neither acidic nor basic. More acidic chemicals have pH values below 7, while more basic substances have pH values above 7.

What is temperature ?

Temperature is a unit used to represent how hot or cold something is. It can be stated using the Celsius or Fahrenheit scales, among others. Temperature shows which way heat energy will naturally flow, i.e., from a hotter (body with a higher temperature) to a colder (body with a lower temperature) (one at a lower temperature).

Therefore, ph meter should be settled down, after that only it can able analyse it.

Learn more about ph from the given link.

https://brainly.com/question/26424076

#SPJ4

E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.

The London dispersion force, the dipole-dipole interaction, and the ion-dipole interaction are the three main categories of intermolecular forces.

A force that attracts the protons or positive parts of one molecule to the electrons or negative parts of another molecule is known as an intermolecular force. A substance's various physical and chemical properties are influenced by this force.

The forces that attract opposing positive and negative charges when two interacting molecules come into contact are known as intermolecular forces of attraction, or IMFA. These include the London dispersion force, hydrogen bonding, dipole-dipole, and ion-dipole forces.

To learn more about intermolecular forces of attraction here:

https://brainly.com/question/10941007

#SPJ1

Full Question = Hydrogen bonds account for which of the following observation? a) hydrogen naturally exists as a diatomic molecule b) it is easily combustible with oxygen c) water molecules are bent or "v-shaped" d) air is more dense than hydrogen bonds e) for its molar mass, water has a high boiling point

Answer:

E) Water's high boiling temperature and molar mass are accounted for by hydrogen bonding.

The energy absorbed by the water is qH₂0 is 1690.8 J.

Energy is the capacity to do work or produce heat. It can be found in many different forms, such as chemical, kinetic, gravitational, electrical, nuclear, and thermal energy. Chemical energy is stored in the bonds of atoms and molecules, which can be released through chemical reactions. Kinetic energy is the energy of motion, and is generated by moving objects.

The energy absorbed by the water can be calculated using the equation q = m * c * ∆T, where m is the mass of the water, c is the specific heat capacity of water, and ∆T is the change in temperature.
m = 100.0 mL * (1.00 g/mL) = 100.0 g
c = 4.18 j/g•C
∆T = 27.8 °C - 23.7 °C = 4.1 °C
Therefore, the energy absorbed by the water is qH₂0 = 100.0 g * 4.18 j/g•C * 4.1 °C = 1690.8 J.

To learn more about energy
https://brainly.com/question/874116
#SPJ1

The field strength is measured in Volts / meter (V/m). The voltage is 50V. The distance is 'halfway between' 25cm ( = .25m), or .125m. The field strength is thus = 50V / .125m = 400 V/m

Equipotential surfaces are surfaces where the potential difference is constant. In the given scenario, the two parallel metal plates are connected across a 50.0V battery, and the equipotential surfaces due to these plates will intersect the paper in the region between the plates.

The lines representing the equipotential surfaces will be perpendicular to the electric field lines and will be parallel to each other. The equipotential surfaces will start at the low-potential plate and be 10.0V apart, with the potential increasing as you move away from the low-potential plate. The equipotential surfaces will be closer together near the high-potential plate and further apart near the low-potential plate.

Learn more about voltage:

brainly.com/question/29445057

#SPJ4

Two very large metal parallel plates that are 25cm apart, oriented perpendicular to a sheet of paper, are connected across the terminals of a 50.0V battery. Draw to scale the lines where the equipotential surfaces due to these plates intersect the paper. Limit your drawing to the region between the plates, avoiding their edges, and draw the lines for surfaces that are 10.0 V apart, starting at the low-potential plate.

The results of research on this particular pathway logically support the following statement: The inefficient activity of argininosuccinase causes cellular argininosuccinate to accumulate.

The enzymes argininosuccinase synthetase and argininosuccinase control the urea cycle, a metabolic process that helps the body get rid of excess nitrogen. Cells build up argininosuccinate because dormant argininosuccinase activity prevents the final step in the conversion of argininosuccinate to arginine and fumarate.

The urea cycle breaks down waste nitrogen into urea, which the body excretes. The enzymes argininosuccinate synthetase and argininosuccinase are necessary for this cycle. There is an accumulation of argininosuccinate inside the cell because argininosuccinase is unable to convert it to arginine and fumarate.

Learn more about argininosuccinate:

https://brainly.com/question/29870174

#SPJ4

A sample of 0.53 gNa₂CO3, is added to 101 ml of 0.1 N H₂SO4 solution. Therefore, solution will be Neutral.

Depending on how fully an acid separates into its ions when placed in water, it can be classified either as strong or weak. In water, a powerful acid, like hydrochloric acid, totally dissociates into its ions. A weak acid barely partially separates into its ions, leaving the acid in the solution together with water and ions.

The terms Arrhenius bases, Brnsted bases, while Lewis bases refer to the three meanings of the word base that are most often used. According to every definition, bases are materials that react to acids. When hydronium as well as hydroxide ion concentrations are equal, a solution is neutral.

Na₂CO₃ + H₂SO₄ → NA₂SO₄ + CO₂ + 2H₂O

Equivalent weight of Na₂CO₃.H₂O = 62 g

weight of Sodium carbonate (Na₂CO₃) = 0.62 g.

W = {N × E × V}/{1000}

0.62 = ( N x 62 x 100 ) / 1000

N = 0.62 x 1000 / 62 x 100

N = 620/6200

N= 0.1

Normality of Na₂CO₃ and H₂SO₄ is Same that is 0.1 N . Solution will be Neutral.

Therefore, solution will be Neutral.

To know more about acid, base and neutral solution, here:

https://brainly.com/question/602584

#SPJ9

Energy sources found underground Oil, natural gas, and coal are collectively called fossil fuels.

sources of energy are fossil fuels formed within the Earth from dead plants and animals over millions of years—hence the name “fossil” fuels. They are established in underground layers of rock and dregs. Nonrenewable energy resources involve coal, natural gas, and oil, ... They are found in underground layers of rock and lees.

Still oil and natural gas will pursue to be the world's top two energy sources accounting for about 60 percent of global demand main energy sources are generally restricted as renewable or nonrenewable on the basis of whether they draw on an exhausted energy resource.

So we can conclude that Even today, oil, coal, and gas serve about 80 chunks of our energy source needs.

Learn more about energy here: https://brainly.com/question/13881533

#SPJ1

The major organic product when trans-1-chloro-2-methylcyclohexane is heated with concentrated sodium ethoxide in ethanol/dimethyl sulfoxide (DMSO) as the solvent is expected to be 2-methylcyclohexanol.

This reaction is a nucleophilic substitution reaction where the sodium ethoxide acts as a nucleophile and attacks the chlorine atom, replacing it with an ethoxide ion and forming an intermediate alkoxide. The intermediate alkoxide can then undergo an elimination reaction, leading to the formation of the alcohol product. The reaction is expected to occur with Markovnikov's rule, meaning that the hydrogen from the alkoxide will add to the less substituted carbon in the intermediate, leading to the formation of 2-methylcyclohexanol. the major organic product when trans-1-chloro-2-methylcyclohexane is heated with concentrated sodium ethoxide [dissolved in ethanol/dimethyl sulfoxide (DMSO) as the solvent]. Cl

Learn more about 2-methylcyclohexanol. here:

https://brainly.com/question/28921179

#SPJ4

Compounds give a NMR spectrum with two signals in a ratio of 2:3 are

4 or 3:2)

Hydrogen is a chemical element with symbol H and atomic number 1 on the periodic table. At standard temperature and pressure, hydrogen is a colorless, odorless, nonmetallic, monovalent, and highly flammable diatomic gas.

Hydrogen can also be produced from water by electrolysis, but this process is commercially more expensive than producing hydrogen from natural gas. The most abundant isotope of hydrogen in nature is protium, whose nucleus has only one proton and no neutrons.

For more information about the hydrogen atom, see https://brainly.com/question/29695801

#SPJ4