What is one way that gas giants differ from the terrestrial planets?

A. The gas giants have hard surfaces.

B. The gas giants have massive atmospheres.

C. The gas giants are much smaller.

D. The gas giants are made of rocks and ice.

Answer:

The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.

Explanation:

so the answer is D

Answer:

electric force

Explanation:

its a contact and noncontact force

Answer:

Explanation:

(A)

Force is said to be the rate of change of momentum.

At the instant, the parallel component of the change of momentum is zero. SInce centripetal force always acts towards the center, hence the direction upwards ( along the positive y-axis).

[tex]\dfrac{dp}{dt} = F(+\hat y)[/tex]

[tex]= \dfrac{mv^2}{r}(+\hat y) \ \\ \\ = \dfrac{28 \ kg \times (7 \ m/s)^2}{3.3 \ m }( + \hat y) \\ \\ = \mathbf{416 \ N ( + \hat y)}[/tex]

(B)

The net force acting on the child is:

[tex]F_{net} = \dfrac{mv^2}{r}( + \hat y) \\ \\[/tex]

[tex]= \dfrac{28 \ kg \times (7 \ m/s)^2}{3.3 \ m }( + \hat y) \\ \\ = \mathbf{416 \ N ( + \hat y)}[/tex]

Answer:

If the angular acceleration is a constant A, then this constant times the time will be equal to the angular velocity.

We know that after accelerating for 10 seconds, the angular velocity is 0.4 rad/s

Then:

A*10s = 0.4 rad/s

If we solve this for A we get:

A = (0.4 rad/s)/10s = 0.04 rad/s^2

This is the angular acceleartion.

Now we assume that the angular speed remains constant at 0.4 rad/s, and we know that the radius of the carousel is 20m, we want to find the linear velocity of the children.

We know that for an angular velocity W and for a radius R, the linear velocity is:

V = R*W

Then in this case the linear velocity is:

V = 20m*(0.4 s^(-1)) = 8 m/s

Answer:

-11.600N

Explanation:

lol

Answer:

OMG IM ON THE SAME QUESTION

Explanation:

Answer:

a) the plastic tube need to be 24.7 m long

b) the kilometer of copper wire required is 15.7

c) the resistance of this solenoid is 5538.8 2 ohms

Explanation:

Given the data in the question;

we determine the length of the plastic tube. assuming the solenoid is long.

the self inductance of a long solenoid is;

L = μ₀n²πr²l

μ₀ = 4π × 10⁻⁷ T-m/A

where

n = number of turns per unit length

r = radius of the solenoid = 8cm (as the diameter of the plastic hollow tube is 16 cm)

l = length of the solenoid or the length of the plastic tube

we find n = number of turns per unit length

given that, the copper wire to be wound around the solenoid is 0.79 mm in diameter

number of turns per meter = n = 1 / ( 0.79 × 10⁻³ m ) = 1265.8 turns/meter

So from our previous formula, we find l

L = μ₀n²πr²l

we substitute

1.0 H = (4π × 10⁻⁷ T-m/A)( 1265.8 )²(3.14)(0.08)² ( l)

1 = 0.04048 × l

l = 1 / 0.04048

l = 24.7 m

Therefore, the plastic tube need to be 24.7 m long

b)  

n = number of turns per unit length = 1265.8 turns/metre

so, the length of the plastic tube over which the copper wire is to be wound,

number of turns of copper wire required = n × l

= 1265.8 turns/meter × 24.7 m

= 31,265.26 turns

Now each turn of the copper wire is to be wound across the 18cm diameter of the plastic tube.

so for each turn length of copper wire required = 2π × r

= 2π × 0.08 m

= 0.5026548 m

So copper wire required for 31,265.26 turns will be;

⇒ 31,265.26 × 0.5026548 = 15715.63m = 15.7 km

Therefore, the kilometer of copper wire required is 15.7

c)

p = resistivity of copper = 1.68 × 10⁻⁸ ohm-m

Resistance = pl/a

where l is length of copper wire, a is cross sectional area;

diameter of copper wire is 0.79-mm

radius of copper wire is 0.79/2 = 0.395 mm = 0.000395 m

area of cross section of copper wire a = πr² = π( 0.00395)² = 4.9 × 10⁻⁷ m²

Resistance = pl/a

we substitute

Resistance = [(1.68 × 10⁻⁸ ohm-m)( 15715.63m )] / [ 4.9 × 10⁻⁷ m² ]

Resistance =  5538.8 2 ohms

Therefore,  the resistance of this solenoid is 5538.8 2 ohms

Kinetic energy decreases if either the mass or the velocity of the object decreases or if both decrease. and  Kinetic energy increases if either the mass or the velocity of the object increases or if both increase.

Explanation:

These statements explain the relationship between mass, velocity, and kinetic energy .i.e KE = ½mv², (3) Kinetic energy decreases if either the mass or the velocity of the object decreases or if b decrease. (4)Kinetic energy increases if either the mass or the velocity of the object decreases or if both decrease.

When a body has a mass of m kg and travels a velocity of v m/s then the kinetic energy is given by,

KE=1/2mv²

In the above relation, it is clearly shown that,

Kinetic energy is directly proportional to the mass of the body,

i.e

KE∝m

and also Kinetic energy directly varies with the square of the velocity of the body.

I.e

KE∝v²

Therefore, From the given expression we can conclude that when mass and velocity increased either one of them or both, the kinetic energy also gets increased.

And when mass and velocity decreased either one of them or both, the kinetic energy also gets decreased. Hence options (3) and (4) are correct.

To learn more about kinetic energy click:

brainly.com/question/26472013

#SPJ3

Answer:

An Oven

Explanation:

The heat is higher, so it moves faster. Shile in a freezer the particles are extremely slow!

Answer:

The frequency of the oscillation is 2.45 Hz.

Explanation:

Given;

mass of the spring, m = 0.5 kg

total mechanical energy of the spring, E = 12 J

Determine the spring constant, k as follows;

E = ¹/₂kA²

kA² = 2E

k = (2E) / (A²)

k = (2 x 12) / (0.45²)

k = 118.519 N/m

Determine the angular frequency, ω;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\omega = \sqrt{\frac{118.519}{0.5} } \\\\\omega = 15.396 \ rad/s[/tex]

Determine the frequency of the oscillation;

ω = 2πf

f = (ω) / (2π)

f = (15.396) / (2π)

f = 2.45 Hz

Therefore, the frequency of the oscillation is 2.45 Hz.

Explanation:

रात में घूमने वाला arthaarat निशाचर

Answer:

20 J/s

Explanation:

Given data

Kinetic energy=100 J

Time= 5 seconds

Hence the rate at which the kinetic friction work is

=100/5

=20 J/s

Therefore the answer is 20 J/s

Answer:

261

Explanation:

Acellus

Explanation:

When hot water is poured on the can in a bucket of cold water, the can crushes off means it gets unshaped

Answer:  I'm not sure, but I think it would be a total lunar eclipse

When the moon passes through the penumbra of Earth’s shadow it is referred to as partial lunar eclipse. The correct option is C.

A partial lunar eclipse occurs when the moon is not completely immersed in the umbra of the earth's shadow.

During a partial solar eclipse, the Moon, Sun, and Earth do not align perfectly straight, and the Moon casts only the penumbra of its shadow on Earth. From our vantage point, it appears that the Moon has eaten the Sun.

A shadow's penumbra is the lighter outer edge. Partial solar eclipses are caused by the Moon's penumbra, while penumbral lunar eclipses are caused by the Earth's penumbra. The penumbra is a type of lighter shadow.

The Penumbra is a half-shadow region that occurs when an object only partially covers a light source.

Thus, the correct option is C.

For more details regarding lunar eclipse, visit:

https://brainly.com/question/28679608

#SPJ2

Answer:

distance = 112 miles

Explanation:

its 12 miles every 0.6 in a hour

Answer:

320 J

Explanation:

From the question,

KE = 1/2mv².................. Equation 1

Where KE = Kinetic Energy, m = mass of the rock, v = velocity of the rock

Given: m = 40 kg, v = 4m/s

Substitute these values into equation 1

KE = 1/2(40)(4²)

KE = 20×16

KE = 320 J

Hence the kinetic energy of the rock is 320 J

Answer:

hydrogen, helium, lithium, beryllium, boron, carbon, nitrogen, oxygen, fluorine, neon, sodium, magnesium, aluminum, silicon, phosphorus, sulfur, chlorine, argon, potassium, calcium, scandium, titanium, vanadium, chromium, maganese, iron, cobalt, nickel, copper, zinnc, gallium, germanium, aresnic, selenium, bromine, krypton, rubidium, strongtium, yttrium, zirconium, niobium, molybdenum, technetium, ruthenium, rhodium, palladium, silver, cadmium, indium, tin, atimony, tellurium, iodine, xenon, cesium, barium, lanthanum, cerium, praseodyumium, neodymim, promethium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, luteium, hafnium, tantalum, tungsten, rhenium, osmium, irdium, platinum, gold, mercury, thallium, lead bismuth, polnium, astatine, radon, rancium, radium, actinum, thorium, protactinium

Explanation:

Answer:

Regular reflection

Explanation:

Regular reflection occurs when light reflects off a very smooth surface and forms a clear image.

i hope this helps a bit.

According to the context, a sharp image is formed when light reflects from a regular reflection.

It is reflection without diffusion that obeys the laws of geometrical optics, as in mirrors.

This reflection of light happens when the angles that the two rays determine with the surface are equal.

Therefore, we can conclude that according to the context, a sharp image is formed when light reflects from a regular reflection.

Learn more about regular reflection here: https://brainly.com/question/3778324

#SPJ2

Answer:

[tex]3.52\times 10^{25}\ \text{J}[/tex]

Explanation:

G = Gravitational constant = [tex]6.674\times 10^{-11}\ \text{Nm}^2/\text{kg}^2[/tex]

M = Mass of Sun = [tex]1.989\times 10^{30}\ \text{kg}[/tex]

m = Mass of Earth = [tex]5.972\times 10^{24}\ \text{kg}[/tex]

[tex]r_i[/tex] = Initial radius of orbit = [tex]1.5\times 10^{11}\ \text{m}[/tex]

[tex]r_f[/tex] = Final radius of orbit = [tex]((1.5\times 10^{11})+2\times 10^3)\ \text{m}[/tex]

Energy required is given by

[tex]E=\dfrac{1}{2}\Delta U\\\Rightarrow E=\dfrac{GMm}{2}(\dfrac{1}{r_i}-\dfrac{1}{r_f})\\\Rightarrow E=\dfrac{6.674\times 10^{-11}\times 1.989\times 10^{30}\times 5.972\times 10^{24}}{2}(\dfrac{1}{1.5\times 10^{11}}-\dfrac{1}{(1.5\times 10^{11})+2\times 10^3})\\\Rightarrow E=3.52\times 10^{25}\ \text{J}[/tex]

The energy required would be [tex]3.52\times 10^{25}\ \text{J}[/tex].

Answer:

8.45 m

Explanation:

From the question given above, the following data were obtained:

Mass (m) = 90 Kg

Initial velocity (u) = 13 m/s

Final velocity (v) = 0 m/s

Height (h) =?

NOTE: Acceleration due to gravity (g) = 10 m/s²

The height of the hill can be obtained as follow:

v² = u² – 2gh (since the cart is going against gravity)

0² = 13² – (2 × 10 × h)

0 = 169 – 20h

Rearrange

20h = 169

Divide both side by 20

h = 169/20

h = 8.45 m

Therefore, the height of the hill is 8.45 m

Answer:

J = -0.522 m/s

Explanation:

Given that,

The mass of the baseball, m = 0.145 kg

Initial velocity, u = 14.5 m/s

Final velocity, v = 10.9 m/s

aWe need to find the direction of the impulse that the glass imparts to the baseball. Impulse is equal to the change in momentum such that,

[tex]J=m(v-u)[/tex]

Substitute all the values,

[tex]J=0.145\times (10.9-14.5)\\\\=-0.522\ kg-m/s[/tex]

The direction of impulse is opposite to the direction of velocity.

Answer:

the oscillations of the electrons must be in the 10⁸ Hz = 100 MHz range

Explanation:

The speed of a wave of radio, television, light, heat, all are manifestations of electromagnetic waves that are oscillations of electric and magnetic fields that support each other, the speed of all these waves is the same and the vacuum is equal to c = 3 108 m / s

All waves have a relationship between the speed of the wave, its frequency and wavelength

          c = λ f

          f = c /λ

for this case lam = 1 m

          f = 3 10⁸/1

          f = 3 10⁸ Hz

the oscillations of the electrons must be in the MHz range

It should be clarified that the speed of light in air is a little lower

          n = c / v

          v = c / n

the refractive index of vacuum is n = 1 and the refractive index of air is n = 1.000002

Answer:

The right solution is "126 Psi".

Explanation:

The given values are:

P₁ = 130 psig

i.e.,

   = [tex]130\times 6.894[/tex]

   = [tex]896.22 \ Kpa[/tex]

or,

   = [tex]896.22\times 10^3 \ Pa[/tex]

Z₂ = 10ft

    = 3.05 m

[tex]\delta[/tex] = 1000 kg/m³

According to the question,

Z₁ = 0

V₁ = V₂

As we know,

⇒  [tex]\frac{P_1}{\delta_g} +\frac{V_1^2}{2g} +Z_1=\frac{P_2}{\delta_g} +\frac{V_2^2}{2g} +Z_2[/tex]

On substituting the values, we get

⇒  [tex]\frac{P_1}{\delta_g} +0+0=\frac{P_2}{\delta_g} +0+Z_2[/tex]

⇒  [tex]\frac{896.22\times 10^3}{1000\times 9.8} =\frac{P_2}{1000\times 9.8} +3.05[/tex]

⇒  [tex]P_2=866330 \ P_a[/tex]

i.e.,

⇒       [tex]=866330\times 0.000145[/tex]

⇒       [tex]=126 \ Psi[/tex]

Answer:

Is that your answer

Answer:

a = 72 m/s^2

Explanation:

Since the object is moving in circle, the acceleration points TOWARDS the centre of the circle (it is centripetal acceleration)

a = v^2 / r

a = 60^2 / 50

a = 72 m/s^2

Answer:

The correct answers are: A, C, D, E

Explanation:

The magnetic field is a solenoid is given by

         B = μ₀  [tex]\frac{N}{L}[/tex]   I

where N is the number of turns, I the current and L length of the solenoid.

Using this equation let's examine the different responses to permute increasing the magnetic field

A) True. a thicker wire decreases the resistance and the current can increase the system.

B) False. If there is no voltage source there is no current in the system

C) True. the field is proportional to the number of turns

D) True. the magnetic moments of the core align with the field increasing its value

E) True. When the loops are closer together, more of them can fit per unit length

F) False. If the wire is shorter the number of turns decreases.

The correct answers are: A, C, D, E

Answer:

5.0/s

Explanation:

Answer:

b and a it is this that abewsr