Answer:
The action of measuring the size, length, or amount of something, as established is called measurement.
Explanation:
“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.
Do you believe in aliens? And if so, what's your reasoning for believing in them?
Answer:
I believe in aliens but I do not think everyone should. I started to believe in aliens since the US government said they would be taking extraterrestrial life seriously. They will be in our lives sooner or later, so we shouldn't be ignoring their presence. I believe them because surveys show that nearly half of Americans believe that aliens have visited the Earth, either in the ancient past or recently. That percentage has been increasing. Belief in alien visitation is greater than belief that Bigfoot is a real creature, but less than belief that places can be haunted by spirits. Also there have been a lot of UFO sightings, and a Navy Jet has a video of that as well. These small things is just hard to ignore, and they make me and hopefully others believe in aliens.
A particle is moving on a circular path of radius R. What will be its displacement and distance covered after 3 ½ round?
(please help fast)
Answer:
2r or diameter
Explanation:
After 3 1/2 rounds it will end up on the other side of the circle and displacement will be 2 x the radius = d
Distance = 7 π R
Displacement = 2 R from the starting point directed through the center of the circle
When a rope is wrapped around a wheel (or pulley) and pulled, the lever arm is the ________ Blank 1 of the wheel and the angle between this and the force is ALWAYS ________ degrees. Blank 2
Answer:
the DISTANCE between the lever arm and the force is always 90º
Explanation:
In this exercise, you are asked to complete the missing words so that the phrase makes sense.
note that the torque is
τ = F x r
where bold indicates vectors
When the rope is pulled, the DISTANCE between the lever arm and the force is always 90º
In a whispering gallery, a person standing at one focus of the ellipse can whisper and be heard by another person standing at the other focus, because all sound waves that reach the ceiling from one focus are reflected to the other focus. A hall 120 feet in length is to be designed as a whispering gallery. Of foci are located 40 feet from the center, how high will the ceiling be at the center
Answer:
Hence, the height of the ceiling at the center is 44.72 feet.
Explanation:
Consider that a whispering gallery has a length of 120 feet, and the foci are located 40 feet from the center.
Assume that the shape is a horizontal semi-ellipse with a center (0,0) and has the equation,
[tex]\frac{x^{2} }{ a^{2} } + \frac{y^{2} }{b^{2} } =1[/tex] where a>b,
so,
2a = 120
a = 60
and
c = 40
Therefore, the equation of the ellipse is,
[tex]c^{2} = a^{2} -b^{2} \\\\40^{2} = 60^{2} -b^{2}\\\\b^{2} =2000\\\\b= 44.72.[/tex]
total distance divided by total time
Explanation:
average speed is the total distance divided by total time
what is chemical change ??
Answer:
the combination,decomposition or replacement that occurs in the molecules of matter during chemical change called chemical reaction
Answer:
A chemical change happens when one chemical substance is transformed into one or more different substances, such as when iron becomes rust. ... A chemical change is different from a physical change, which doesn't rearrange atoms or molecules and produce a completely new substance.
(Q020) Stars a. all explode cataclysmically when they die and contribute their matter to future star generations. b. begin as protostars, which fire up when they collapse and become denser and hotter. c. have unlimited amounts of fuel and therefore exist indefinitely. d. create elements by splitting the nuclei of small atoms into the nuclei of larger atoms.
Answer:
Option (b).
Explanation:
A star is a heavenly body which emits a tremendous amount of energy by the reaction of nuclear fusion.
Sun is the smallest star in the universe.
The star stars from the proto star, this is the process of birth of a star. Then it collapse due to the gravitational pull and then it tarts emit light and energy and become a star.
After the long long time, it starts to decay and become a neutron star or the black hole.
So, the correct option is (b).
Gas to liquid with explanation on the basis of kinetic model and condensation point.
Answer:
Explanation:
1)Melting:
Melting is the process by which a substance changes from the solid phase to the liquid phase. ... Melting occurs when the internal energy of a solid increases, usually through the application of heat or pressure, such that the molecules become less ordered.
2) liquefication:
In physics and chemistry, the phase transitions from solid and gas to liquid (melting and condensation, respectively) may be referred to as liquefaction. The melting point (sometimes called liquefaction point) is the temperature and pressure at which a solid becomes a liquid.
3) vaporization:
Vaporization, conversion of a substance from the liquid or solid phase into the gaseous (vapour) phase. If conditions allow the formation of vapour bubbles within a liquid, the vaporization process is called boiling. Direct conversion from solid to vapour is called sublimation.
4) Sublimation occurs as molecules of a substance in the solid state go to the vapor state directly, rather than through the liquid state. ... ⭕In terms of the kinetic molecular theory, we know that molecules are in constant random motion, even when the substance is below the melting point.
What is the period? Blank seconds.
Answer:
Period refers to the time for something to happen and is measured in seconds/cycle
Answer:
What is the period of time? 5.62 Seconds
What is the amplitude? 1 Centimeters
Explanation:
it just makes sense
The reservoir stores 6 500 000 m3 of water. The density of the water is 998 kg/m3. Calculate the mass of water in the reservoir. Give your answer in standard form.
Answer:
Mass = 64,870,000,000 kilograms
Explanation:
Given the following data;
Density = 998 kg/m³
Volume = 6,500,000 m³
To find the mass of water in the reservoir;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
Density = mass/volume
Making mass the subject of formula, we have;
Mass = density * volume
Mass = 998 * 6,500,000
Mass = 64,870,000,000 kilograms
A flywheel turns through 40 rev as it slows from an angular speed of 1.5 rad/s to a stop. (a) Assuming a constant angular acceleration, find the time for it to come to rest. (b) What is its angular acceleration
Answer:
The time of motion is 333.3 s
The angular acceleration is -0.0045 rad/s²
Explanation:
Given;
angular distance of the flywheel, θ = 40 rev
initial angular speed, [tex]\omega_i[/tex] = 1.5 rad/s
When the wheel comes to rest, the final angular speed, [tex]\omega_f[/tex] = 0
The angular acceleration is calculated as follows;
[tex]\omega_f^2 = \omega_i^2 + 2\alpha \theta \\\\0 = (1.5 \ rad/s)^2 + 2\alpha (40 \ rev\times \frac{2\pi \ rad}{1 \ rev} )\\\\0 = 2.25 + 160\pi \alpha\\\\160\pi \alpha = - 2.25\\\\\alpha = -\frac{2.25 }{160\pi} \\\\\alpha = -0.0045 \ rad/s^2[/tex]
The time of motion is calculated as;
[tex]\omega_f = \omega _i + \alpha t\\\\0 = 1.5 + (-0.0045t)\\\\0 = 1.5 - 0.0045t\\\\0.0045t = 1.5\\\\t = \frac{1.5}{0.0045} = 333.3 \ s[/tex]
why is the value of g more in terai than in the mountain
The solution and answer are well written in the Pic above.
If displacement has a magnitude AND direction is it a scalar or vector quantity?
scalar
vector
Explanation:
Obviously vector quantity
A student places a block on a table and hangs one mass from the block. The student lets the block go and observes the block accelerate toward the end of the table where the mass was located. The student then places the block on the table and hangs a second, larger mass from the opposite end of the block. The block accelerates in the opposite direction from the first trial. What does this experiment demonstrate? Answer:
Magnitude of acceleration
Explanation:
We know that acceleration can increase depending in the force applied on an object, any object with a greater mass will apply a greater force. F = M(a).
This Newton's second law establishes a relationship between the summary of the external force and the acceleration of the body, It is demonstrated with the change in the direction and magnitude of the acceleration in the experiment
Newton's second law establishes a relationship between the net force and the acceleration, according to the expression
∑ F = m a
where ∑F is the sum of the external forces, m the mass and the acceleration of the body
In this case we have an initial situation, the block and a baking mass, therefore an acceleration is created towards the hanging mass given by
W₁ = M₁ g
F = ma
M₁ g = m a
a = [tex]\frac{M_1}{m} \ g[/tex]
where W₁ and M₁ are the weight and the masses of the mass of the body hanging under the acceleration of gravity.
In the second case, perhaps you have two masses, one on each side,
∑ F = W₁ -W₂
∑F = (M₁ -M₂) g
let's use Newton's second law
(M₁ -M₂ ) g = m a
a = [tex]\frac{M_1 - M_2}{m} \ g[/tex]
We can see that in the second case the acceleration depends on the difference of the hanging masses. This is a proof of Newton's second law where the effect on acceleration is due to the sum of all external forces and not of each force individually.
In conclusion with the realization of this experiment demostrate the valid true of Newton's second law
Learn more about Newton's second law here: https://brainly.com/question/19860811
please help me with this question
Answer:
(4) A = 3 A, A₂ = 11 A
(5) 7 A
Explanation:
(4)
From the diagram,
A = 3+6+2
A = 11 A
V = A₂R
A₂ = V/R₂............ Equation 1
Given: V = 12 V, R₂ = 4 Ω
Substitute these values into equation 1
A₂ = 12/4
A₂ = 3 A
(5) Applying,
V = IR'
I = V/R'............ Equation 1
Where V = Voltage, I = cuurent, R' = total resistance.
But,
1/R' = (1/3)+(1/4)
1/R' = (3+4)/12
1/R' = 7/12
R' = 12/7 Ω
Given: V = 12 V
Substitute these values into equation 1
I = 12/(12/7)
I = 7 A
Therefore
A = 7 A
Help Meeeeeeeee. Have a nice day:)
Answer:
01.
Explanation:
Half the acceleration. Its heavier and moves slower. If it moved the same acceleration, the forces would also have to be doubled since the mass was.
¿ Sobre que superficie se desplazara mas rápidamente un tejo, sobre cemento o sobre cerámica? ¿por que?
Answer:
cemento potque es plano
Two parallel conducting plates are separated by 12.0 cm, and one of them is taken to be at zero volts. (a) What is the magnitude of the electric field strength between them, if the potential 5.6 cm from the zero volt plate is 450 V
Answer:
-8.036 kV/m
Explanation:
The electric field E = -ΔV/Δx where ΔV = change in electric potential = V - V' where V = electric potential at x = 5.6 cm = 450 V and V' = electric potential at x = 0 cm, = 0 V . So, ΔV = V - V' = 450 V - 0 V = 450 V.
Δx = distance between the 0 V plate and the 450 V point = 5.6 cm = 0.056 m
So, E = -ΔV/Δx
Substituting the values of the variables into the equation, we have
E = -ΔV/Δx
E = -450 V/0.056 m
E = -8035.7 V/m
E = -8.0357 kV/m
E ≅ -8.036 kV/m
Since the electric field between two parallel conducting plates is constant, the electric field between the plates is E = -8.036 kV/m
A student walks 350 m [S], then 400 m [E20°N], and finally 550 m [N10°W]. Using the component method, find the resultant (total) displacement). Round your answer to the appropriate significant figures. Round your angle to the nearest degree.
In component form, the displacement vectors become
• 350 m [S] ==> (0, -350) m
• 400 m [E 20° N] ==> (400 cos(20°), 400 sin(20°)) m
(which I interpret to mean 20° north of east]
• 550 m [N 10° W] ==> (550 cos(100°), 550 sin(100°)) m
Then the student's total displacement is the sum of these:
(0 + 400 cos(20°) + 550 cos(100°), -350 + 400 sin(20°) + 550 sin(100°)) m
≈ (280.371, 328.452) m
which leaves the student a distance of about 431.8 m from their starting point in a direction of around arctan(328.452/280.371) ≈ 50° from the horizontal, i.e. approximately 431.8 m [E 50° N].
A piano string of density 0.0050 kg/m is under a tension of 1,350 N. Find the velocity with which a wave travels on the string.
Answer:
519.62 m/s
Explanation:
Applying,
v = √(T/m').............. Equation 1
Where v = velocity of the wave, T = Tension on the string, m' = mass per unit length of the string
From the question,
Given: T = 1350 N, m' = 0.005 kg/m
Substitute these values into equation 1
v = √(1350/0.005)
v = √(270000)
v = 519.62 m/s
Liquid to solid with explanation on the basis of kinetic model and freezing point.
Answer:
As a liquid is cooled its molecules lose kinetic energy and their motion slows. When they've slowed to where intermolecular attractive forces exceed the collisional forces from random motion, then a phase transition from liquid to solid state takes place and the material freezes.
hope this helps you..!!!!what is a weed (question answer)
Answer:
A weed is a plant considered undesirable in a particular situation, "a plant in the wrong place". Examples commonly are plants unwanted in human-controlled settings, such as farm fields, gardens, lawns, and parks
Please help meeeee will mark as brainliest
Answer:
a) pressure means force acted on a body per unit area
If a rock has a speed of 12 m/s as it hits the ground, from what height did it
fall, assuming its initial speed was zero? Its mass is 50 kg.
A. 600 m
B. 4.2 m
C. 12 m
D. 7.3 m
Answer:
To find the height the following formula should be used:
v 2 = u 2 + 2aH
Explanation:
Assuming this occurs on earth, a= 9.8 ms -2
-2 2
12=0+2 x9.8 x H
144
_______ =H
2 x 9.8
H= 7.35m
the weight of body is less at moon than its weight is more at earth
Answer:
Gravity
Explanation:
There's no gravity on space so you're floating
At a 1500 m race, Ken ran at an average speed of 200 m/min. How long did it take for Ken to finish the race? (meter = m, minute = min) min
[tex]speed = \frac{distance}{time} \\ = > \frac{200m}{min} = \frac{1500m}{t} \\ = > \frac{200m}{60s} = \frac{1500m}{t} \\ = > \frac{10m}{3s} = \frac{1500m}{t} \\ = > t = 1500m \times \frac{3s}{10m} \\ = > t = 150 \times 3s \\ = > t = 450s \: [/tex]
This is the answer.
Hope it helps!!
Try working backward from the desired goal to the starting point or current state. This advice describes a
Answer:
heuristic.
Explanation:
Psychology can be defined as the scientific study of both the consciousness and unconsciousness of the human mind such as feelings, emotions and thoughts, so as to understand how it functions and affect human behaviors in contextual terms.
This ultimately implies that, psychology focuses on studying behaviors and the mind that controls it.
A heuristic is an automatic mental shortcut or rule of thumb that avail people the opportunity to make quick and efficient judgement in decision-making process, as well as proffering solutions to a problem. Thus, it allows people to make decisions, pass probability judgement or proffer solutions to problem quickly and efficiently while applying minimal mental effort.
Basically, a heuristic helps an individual to shorten the decision-making time while paying less attention on thinking of his or her next course of action.
Hence, when you're advised to try working backward from the desired goal to the starting point or current state. This advice describes a heuristic.
kettles heated on stoves used to be made of copper. was this a good choice?
Kettles heated on stoves are used to be made up of copper. This is because copper is a good conductor of heat and electricity.
Why copper is used in making kettles?Copper is used in making kettles. This is because copper is an excellent choice for a tea kettle as it is an excellent conductor of heat and electricity. This means that copper heats up quickly and evenly, making it ideal for the purpose of boiling water and preparing tea. Copper is also a durable material which can last for many years with proper care.
Copper kettles are polished from the outer surface as it is subject to corrosion that is caused by salts and sulfates. If the kettles are not cleaned completely, this corrosion, even as a slight film, will affect the taste of what is prepared in that copper kettle, giving a metallic sensation to taste.
Learn more about Copper here:
https://brainly.com/question/13677872
#SPJ2
A car took 5 minutes to travel from town A to town B which are 12km apart.Calculate the average speed of the path.
Speed = distance / time
Speed = 12km / 5 minutes
Speed = 2.4 km per minute
Speed is measured per hour, 1 hour has 60 minutes.
2.4 km per minute x 60 minutes = 144 km per hour
Which forms of energy determine temperature: translational kinetic energy, rotational kinetic energy, vibrational kinetic energy, or all of these
oh this question seems to be difficult I don't think I can answer this