what is a biotic animal that lives in two terrestrial ecosystems

The reading on a scale could be less after leaving the top floor and heading downward due to the effect of gravity on the body.

Gravity is a fundamental force of nature that exists between all objects that have mass or energy. It is the force that pulls two objects towards each other, and it is what keeps objects like planets, stars, and galaxies in their orbits.

The force of gravity is directly proportional to the masses of the objects and inversely proportional to the square of the distance between them. This means that the greater the mass of the objects and the closer they are to each other, the greater the force of gravity between them.

Gravity is responsible for many phenomena that we observe in our daily lives, such as keeping us and other objects on the surface of the Earth, causing tides in the ocean, and making objects fall to the ground when we drop them. It is also a key concept in the fields of astronomy and astrophysics, as it is what allows us to understand the motion and behavior of celestial objects in the universe.

Hence, The reading on a scale could be less after leaving the top floor and heading downward due to the effect of gravity on the body.

To know more about gravity visit :

https://brainly.com/question/9934704

#SPJ4

Answer:

sorry I'm not smart

Explanation:

 (c) n=3,1=2,m=1,s=+1/2 this set of quantum number represents the highest energy of atom

Correct option is C)

The sets of the quantum numbers and the corresponding orbitals are as shown below.

a)n=3,l=0 means 3s− orbital

b)n=3,l=1 means 3p− orbital

c)n=4,l=2 means 4d− orbital

d)n=4,l=0 means 4s− orbital

Increasing order of energy among three orbitals is 3s<3p<4s<4d

∴4d has highest energy.

Hence, the set c of quantum numbers (n=4,l=2,m=1,s=+1/2)  represents the highest energy of an atom.

Learn more about quantum number here:

https://brainly.com/question/16977590

#SPJ4

The given statement " Living cells contribute to the turbidity of a culture, and this contribution can be a disadvantage of the indirect spectrophotometer method, is True.

The indirect spectrophotometer method, which measures the turbidity of a culture to estimate cell density, assumes that the only contributor to turbidity is the cells themselves. However, other factors such as debris, bubbles, and extracellular materials can also contribute to the turbidity, leading to inaccuracies in cell density measurements. In microbiology, turbidity is a measure of the cloudiness or haziness of a liquid culture, and it is often used as an indirect measure of cell density. The more cells there are in the culture, the more turbid it will appear.

To know more about turbidity, here

https://brainly.com/question/26612834

#SPJ4

Answer:

  2.32 m/s

Explanation:

If an 8.90 kg block of ice slides down a 1.15 m frictionless ramp to reach a speed of 2.87 m/s, you want to know its final speed if there were friction opposing the motion with a force of 11.0 N.

The kinetic energy at the bottom of the frictionless ramp is ...

  KE = 1/2mv²

  KE = 1/2(8.90 kg)(2.87 m/s)² = 36.654205 J

When friction is introduced, the work done to oppose the friction is ...

  W = Fd

  W = (11 N)(1.15 m) = 12.65 J

Hence the remaining energy of the block at the bottom of the ramp with friction is ...

  KE' = 36.654205 -12.65 J = 24.004205 J

This corresponds to a speed of ...

  v = √(2·KE/m) = √(2·24.004205/8.9) ≈ 2.32 . . . . m/s

The speed at the bottom of the ramp with friction is about 2.32 m/s.

__

Additional comment

We can find the slope of the ramp by equating the ending kinetic energy to the beginning potential energy. As you can see, that is not relevant to the problem, since the opposing force is parallel to the ramp.

a. Upthrust on the solid:

[tex]Upthrust = volume of solid * density of fluid * g = 1000 kg/m^3 * volume of solid * 10 m/s^2[/tex]

b. Volume of the solid:

[tex]volume = mass/density = 1.3 kg / (1000 kg/m^3) = 1.3 x 10^-3 m^3[/tex]

c. Density of the solid:

So,[tex]density = mass/volume = 1.3 kg / (1.3 x 10^-3 m^3) = 1000 kg/m^3[/tex]

Upthrust is the upward force exerted on an object immersed in a fluid. It is equal to the weight of the fluid displaced by the object and acts in the opposite direction to gravity. Upthrust helps to counteract the weight of the object and keep it afloat.

a. The upthrust on an object immersed in a fluid is equal to the weight of fluid displaced by the object. The weight of fluid displaced can be calculated using the formula:

Weight of fluid = volume of fluid * density of fluid * g

Since the solid is completely immersed in water, the volume of the fluid displaced is equal to the volume of the solid. The density of water is given as 1000 kg/m^3, and the acceleration due to gravity is given as[tex]10 m/s^2.[/tex]

Learn more about upthrust, here:

https://brainly.com/question/22131315

#SPJ9

The maximum length of runway needed and tension in the towrope will be 175.05 m and 5999N.

For solving this question we will use the laws of Kinematics as well as the Newton's Laws of Motion. According to the third law of Kinematics

v² = u² + 2aS ; where v is the final velocity, u is the initial velocity, a is the acceleration and S is the displacement.

According to Newton's Laws of Motion we know that the net force is equal to product of mass and acceleration that is

F = ma ; where F is net force, m is mass of the body and a is the acceleration.

Now, form the free body diagram of the gliders, we balance the forces by Newton's law of motion as:

For glider 1 the forces in x axis will be:

T₁ - T₂ - f = ma                                                    ......(1)

where T₁ and T₂ are tensions on glider 1 and 2 respectively and f is the frictional force.

In y axis the forces will be:

N₁ - W = 0 ; where N₁ is the normal on first glider and W is the weight due to gravity.

For glider 2 the forces in x axis will be:

T₂ - f = ma                                                           ......(2)

where T₂ is tensions on glider 2 and f is the frictional force.

In y axis the forces will be:

N₂ - W = 0 ; where N₂ is the normal on second glider and W is the weight due to gravity.

From equation (1) and (2) we get

T₁ - 2f = 2ma

a = T₁ - 2f/2m

a = 12000 - 2(2800)/2(700)

a = 6400/1400

a = 4.57 m/s²

Now from laws of Kinematics we have

v² = u² + 2aS; here the initial velocity is zero so u = 0 and v = 40 m/s

(40)² = 0 + 2 × 4.57 × S

S = 1600/9.14

S = 175.05 m

Now for the tension in the second rope of glider we use equation (2) that is

T₂ - f = ma

T₂ = ma + f

T₂ = 700 × 4.57 + 2800

T₂ = 3199 + 2800

T₂ = 5999 N

Learn more about Tension at:

brainly.com/question/12792944

#SPJ4

The reaction to the action force of the impact of the ball against the player's glove is option B): "the force the glove exerts on the ball".

This is known as Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. So, as the ball exerts a force on the glove, the glove exerts an equal and opposite force on the ball, allowing the player to catch the ball. The other options listed (A, C, and D) are not directly related to the action-reaction force pair involved in the catch.

You can learn more about Newton's Third Law of Motion at

https://brainly.com/question/62770

#SPJ4

The angular momentum of the system is  225,540 kg [tex]m^{2} /s[/tex] and the distance between the modules that would give an effective acceleration of gravity equal to g is 24.8 m.

(a) The angular momentum of the system is given by L = Iω.

The moment of inertia of an equilateral triangle of mass M and side length a is I = (1/6)M[tex]a^{2}[/tex]

The mass of each capsule is 100 people × 75.0 kg/person = 7,500 kg.

Therefore, the total mass of the system is M = 3 × 7,500 kg = 22,500 kg.

The radius of the circle is half the side length of the equilateral triangle, so r = 41.0 m.

Therefore, the angular velocity of rotation is given by ω = (g/2)/r = 0.120 rad/s.

Using these values, the angular momentum of the system is L = (1/6)M[tex]a^{2}[/tex]ω = (1/6) × 22,500 kg × (82.0 [tex]m^{2}[/tex]) × 0.120 rad/s = 225,540 kg[tex]m^{2} /s[/tex]

(b) If the modules are pulled closer together, the moment of inertia of the system will decrease, because the mass of the system will be closer to the axis of rotation. According to the conservation of angular momentum, if the moment of inertia decreases, the angular velocity of rotation must increase in order to keep the angular momentum constant. Therefore, pulling the modules closer together would increase the rotational rate of the space station.

(c) The effective acceleration of gravity is given by g_eff = (g/2) + ([tex]v^{2}[/tex]/r), where v is the linear velocity of the space station. At the current rotational rate, the linear velocity of the space station is v = rω = 41.0 m × 0.120 rad/s = 4.92 m/s.

g.eff = (g/2) + ([tex]v^{2}[/tex]/r) = g

([tex]v^{2}[/tex]/r) = (g/2)

r = (2[tex]v^{2}[/tex])/g

Substituting the values for v and g, we get:

r = (2 × [tex]4.92m/s ^{2}[/tex])/9.81 [tex]m/s^{2}[/tex] = 24.8 m

Therefore, the distance between the modules that would give an effective acceleration of gravity equal to g is 24.8 m.

Learn more about angular momentum here:

https://brainly.com/question/15898158

#SPJ4

1. As the Tsunami wave approaches the beach, water levels will start to rise, and the ocean may appear to recede away from the shoreline.

2. The ocean may become very calm, and the surface may appear glassy.

3. Strong currents may be felt, and debris such as seaweed, branches, and shells may be seen rushing away from the shoreline.

4. Animals such as birds may be seen fleeing from the shoreline, and a loud roar may be heard as the wave approaches.

5. The wave will eventually reach the beach, and the water levels will quickly rise to a high level. The wave will then crash into the shore, causing destruction and flooding.

A  Tsunami is a powerful series of ocean waves caused by an underwater disturbance, such as an earthquake, volcano, or landslide. These waves travel across the ocean at high speeds and can reach up to hundreds of feet in height when they reach coastlines, causing severe flooding and destruction. Tsunamis are also known as seismic sea waves, and they can occur anywhere in the world.As the wave energy travels, it causes the sea level to rise and creates a “wave” that can travel up to 500 miles per hour. Tsunamis can reach heights of up to 100 feet and can cause extensive damage to coastal areas. The strength of the wave depends on the intensity of the earthquake or eruption that caused it.

Tsunamis usually arrive onshore suddenly and without warning, leaving little time for people to evacuate to safety and are often accompanied by strong currents and large amounts of debris, making them even more destructive.

To know more about Tsunami, visit:

https://brainly.com/question/11687903

#SPJ4

The kinetic energy of the brick equal the elastic potential energy at the top of the hill. Using this, the speed of the brick is 14 m/s.

The elastic potential of a spring is directly proportional to the squire of the displacement.

Then,

p = 1/2 k x²

Given that, spring constant k = 500 N/m

height of the hill x = 2 m

weight of the load = 100 N

then mass = 100N/9.8 m/s² =10.20 Kg.

At the top of the hill, kinetic energy of the hill is equal to the elastic potential.

then, 1/2 mv² =  1/2 k x²

speed v of the brick  = √kx²/m

v = √(500 N/m × 2 m²/10.20 kg)

  = 14 m/s.

Therefore, the speed of the brick at the top of the hill is 14 m/s.

Find more on elastic potential :

https://brainly.com/question/12807194

#SPJ1

A. The magnitude of C can be determined.
D. The magnitude of C is between 1m and 10m.

When two vectors are added, the magnitude of the resulting vector can be found using the law of cosines. For the vectors A and B, the magnitude of their sum C is given by:
|C|² = |A|² + |B|² + 2|A||B|cosθ,

where θ is the angle between the vectors A and B. Since the directions of A and B are unknown, θ could take any value between 0 and 180 degrees. However, the minimum value of cosθ is -1, which occurs when θ = 180 degrees. Therefore, the minimum magnitude of C is:

|C|min = |A| - |B| = 1 m - 10 m = 9 m.

The maximum value of cosθ is 1, which occurs when θ = 0 degrees. Therefore, the maximum magnitude of C is:

|C|max = |A| + |B| = 1 m + 10 m = 11 m.

Therefore, the magnitude of C is between 1m and 10m, and it can be determined.

Learn more about magnitudes here:

https://brainly.com/question/15681399

#SPJ4

correct question

Which of the following statements are true about the magnitude of the vector C, which is defined as the sum of two given vectors A and B with magnitudes 1m and 10m respectively, but unknown directions? (Choose all that apply.)

A. The magnitude of C can be determined.
B. The magnitude of C is less than 10m.
C. The magnitude of C is less than 1m.
D. The magnitude of C is between 1m and 10m.
E. The magnitude of C is greater than 11m.

(1) The potential difference between the two spheres will cause charges to flow from Sphere 1 to Sphere 2 until their potentials are equal.(2)  Since the total charge is conserved, the total charge on both spheres after the switch is closed will be equal to the charge on Sphere 1 before the switch is closed.

a) The potential difference between the two spheres will cause charges to flow from Sphere 1 to Sphere 2 until their potentials are equal. Since Sphere 1 has a positive charge, electrons will flow from Sphere 2 to Sphere 1 until their potentials are equal. This means that Sphere 1 will end up with a lower potential than its initial potential and Sphere 2 will end up with a higher potential than its initial potential. Therefore, Vi is smaller than V2.

b) Since the total charge is conserved, the total charge on both spheres after the switch is closed will be equal to the charge on Sphere 1 before the switch is closed. Therefore, the final charge on Sphere 2, Q2, will be equal to the initial charge on Sphere 1. Hence, Qi is equal to Q2.

c) The electric field strength at the surface of a charged conductor is proportional to the surface charge density. Since Sphere 1 has a larger radius than Sphere 2, it has a larger surface area and therefore a lower surface charge density. This means that E1 will be smaller than E2. Additionally, as charges move from Sphere 1 to Sphere 2, the surface charge density on Sphere 1 decreases, leading to a decrease in E1. Therefore, E1 will be smaller than E2 after the switch is closed.

Learn more about potential difference here:

https://brainly.com/question/12198573

#SPJ4

The east would be the location of the Sun's rising and setting are the changes would you anticipate seeing.

Annual motion, which is a direct result of the Earth's rotation around the sun, is the visible yearly move of the stars as seen from Earth. The ecliptic is a line on the surface of a sphere around which the revolves around the sun 360 degrees each year.

We, the watchers on Earth, whirl past this foreground of far-off stars as the planet rotates on its axis. The stars seem to travel throughout our darkness of space from east to west as Earth spins for the same reason.

To know more about motion visit :

https://brainly.com/question/22810476

#SPJ4

300 N of force must be applied by the mechanic perpendicular to the end of the wrench.

The SI unit of force is the newton, denoted by the letter N. Base units that are pertinent to force are: The symbol for the length unit of a metre is m. the kilogramme (kg), a unit of mass. S represents the second, a measure of time.

The following formula can be used to resolve this issue:

Torque equals force times distance times sin (angle), where:

Torque is the 84 mN desired torque.

Force is the unknowable force that we must discover.

Distance is the length of the wrench in meters, which is 0.28 m

Angle is the angle between the wrench and the direction of the force, which is 90 degrees for a perpendicular force (sin(90) = 1)

Plugging in the values, we get:

84 mN = Force x 0.28 m x 1

Solving for Force, we get:

Force = 84 mN / 0.28 m

Force = 300 N

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

half I think that's just a guess though

part a.

the work done by gravity is approximately 1690 J.

part b.

the work done by the normal force is 0.

part c.

the work done by friction is approximately -671 J

part d.

the total work done is approximately 1019 J

work done is described  as the multiplication of magnitude of displacement d and the component of the force that is in the direction of displacement.

For part a, the work done by gravity can be found using the formula:

W_gravity = mgh

h = dsin(37°) = 8sin(37°) = 4.83 m

W_gravity = (35 kg) * (9.81 m/s^2) * (4.83 m) ≈= 1690 J

In conclusion, the same pattern can be followed to calculate for b, c and d.

Learn more about work done at: https://brainly.com/question/8119756

#SPJ1

Answer:

Explanation:

The Root Mean Square (RMS) pressure of a waveform can be defined as the square root of the average of the square of the pressure values over one period of the wave. The RMS pressure provides a measure of the effective pressure of a waveform and is often used to compare the strength of different waveforms.

For a square wave, the RMS pressure can be found as follows

P_RMS = sqrt((1/T) * ∫_0^T (P_square(t))^2 dt)

Where T is the period of the waveform and P_square(t) is the pressure value of the square wave at time t. The integral is taken over one period of the waveform.

For a triangular wave, the RMS pressure can be found as follows:

P_RMS = sqrt((1/T) * ∫_0^T (P_triangular(t))^2 dt)

Where T is the period of the waveform and P_triangular(t) is the pressure value of the triangular wave at time t. The integral is taken over one period of the waveform.

The RMS pressure of a sinusoidal wave is given by the equation:

P_RMS = (A/sqrt(2))

Where A is the amplitude of the waveform.

Comparing the RMS pressures of the three waveforms, it can be seen that the RMS pressure of a sinusoidal wave is (A/sqrt(2)) which is smaller than the RMS pressure of a square wave or a triangular wave. This is because the square wave and triangular wave have sharper transitions from positive to negative values compared to the sinusoidal wave, which results in higher peak pressure values and hence a higher RMS pressure.

It is worth noting that while the RMS pressures of the three waveforms are different, they provide a measure of the effective pressure of the waveforms and can be used to compare their strengths.

Here is a definition of each variable used in the equation:

P_RMS: The Root Mean Square (RMS) pressure of the waveform. It is a measure of the effective pressure of the waveform.

T: The period of the waveform. It is the time it takes for the waveform to repeat itself.

P_square(t): The pressure value of the square wave at time t.

P_triangular(t): The pressure value of the triangular wave at time t.

∫_0^T: The integral symbol. It represents the sum of the pressure values over one period of the waveform, from time t = 0 to time t = T.

A: The amplitude of the waveform. It is the maximum positive or negative deviation from the zero line of the waveform.

sqrt: The square root symbol. It is used to find the square root of a value.

(A/sqrt(2)): The RMS pressure of a sinusoidal wave. It is calculated as the amplitude divided by the square root of 2.

The estimated total amount of positive charge in a 70 kg person is 5.88 Coulombs (C).

Since the human body is mostly made of water, we can assume that the total amount of positive charge is equal to the total amount of sodium ions (Na+) and other positively charged ions in the body.

The concentration of sodium ions in the human body is approximately 140 milliequivalents per liter (mEq/L), which is equivalent to 0.140 moles per liter (mol/L).

Assuming that the total volume of water in a 70 kg person is approximately 42 liters, we can estimate the total amount of sodium ions in the body as follows:

Total amount of sodium ions = concentration x volume of water
Total amount of sodium ions = 0.140 mol/L x 42 L
Total amount of sodium ions = 5.88 mol

Since each sodium ion has a charge of +1, the total amount of positive charge in a 70 kg person is also 5.88 C.

Therefore, the estimated total amount of positive charge in a 70 kg person is 5.88 Coulombs (C).

Learn more about ions here: brainly.com/question/14982375

#SPJ4

(1) If this were the case, 1000g of this would consist of 965.5 grams of water and 34.5 grams of salt.

(2) Increase in either salinity or temperature leads to an increase in the density of seawater and vice versa.

The salinity of seawater is typically measured in "parts per thousand" (ppt), which means that for every 1000 parts (by weight) of seawater, 34.5 parts are salt.

So it implies that  in 1000g of seawater with a salinity of 34.5 ppt, there would be 34.5g of salt and 965.5g of water.

Salinity has a direct effect on the density of seawater because the dissolved salts in seawater increase its mass, which in turn increases its density.

Temperature also affects the density of seawater because as the temperature increases, the water molecules move faster and the spaces between them increase, leading to a decrease in the density of the water.

Learn more about salinity of seawater here: https://brainly.com/question/2792456

#SPJ1

The general formula for acceleration is:

[tex]a = (v_f - v_i) / t[/tex]

where a is the acceleration, [tex]v_f[/tex]  is the final velocity[tex], v_i[/tex] is the initial velocity, and t is the time interval during which the change in velocity occurs.

Acceleration is the rate of change of an object's velocity over time. It is a vector quantity that is defined as the change in velocity divided by the time interval during which the change occurs. Acceleration can be positive, negative, or zero, and it is measured in units of meters per second squared [tex](m/s^2).[/tex]

To find the time that has passed given the acceleration formula, we would need to rearrange the formula to solve for time "t" in terms of the other variables. For example, if we know the initial velocity, final velocity, and acceleration, we can use the formula to find the time interval during which the velocity changes.

Learn more about acceleration, here:

https://brainly.com/question/12550364

#SPJ9

At a height of 8.0 cm from the bulb's center, the radiation pressure caused by a 75-w bulb is calculated as current=watts divided by voltage=75/120=0.625 amperes.

The mechanical stress that is applied to any surface as a result of the electrical waves and the object exchanging momentum is known as radiation pressure. When photons hit the object's surface in this instance, momentum is transferred.

The development of cometary tail, in which dust particles ejected by cometary nuclei are driven by solar radiation into distinctive trailing patterns, is another visually striking example of radiation pressure. With the development of, it became possible to apply radiation pressure to terrestrial environments.

To know more about momentum visit :

https://brainly.com/question/15415203

#SPJ4

A single photon of violet color has the greatest amount of energy among the visible colors of the electromagnetic spectrum. This is because violet light has the shortest wavelength and the highest frequency among the visible colors.

According to the equation E = hf, where E is the energy of a photon, h is Planck's constant, and f is the frequency of the radiation ,Because the wavelengths of electromagnetic radiation are inversely proportional to their frequencies, according to the equation c = λf, where c is the speed of light, λ is the wavelength of the radiation, and f is its frequency. Therefore, photons of violet light, having the highest frequency, also have the highest energy.

To know more about Electromagnetic spectrum ,here

https://brainly.com/question/23727978

#SPJ4

If a lining is ciliated, then it is covered in hair. Thus, the correct option is D.

Cilia are the small, slender, hair-like structures which are present on the surface of all the mammalian cells. They are primitive in nature and could be single or many types.

Cilia play a major role in the locomotion of body parts. Cilia are also involved in the mechanoreception. The organisms which possess the cilia are known as ciliates.

The bronchus present in the lungs are lined with the hair-like projections called cilia which move the microbes and debris up and out of the airways in the respiratory tract. Scattered throughout the cilia are the goblet cells which secrete mucus that helps in protection of the lining of the bronchus and trapping the microorganisms.

Therefore, the correct option is D.

Learn more about Ciliated lining here:

https://brainly.com/question/15599233

#SPJ1

Answer:

It's hair!

Explanation:

I got it right on me test~

The resulting amplitude of the two waves is 1.25 m

When two waves of different amplitudes interfere, the resulting wave pattern is determined by the relative phase and amplitude of the two waves. If the two waves are in phase, meaning that their peaks and troughs line up, they will reinforce each other and produce a wave with a larger amplitude. This is known as constructive interference.

In this case the amplitude of the resulting wave would be a combination of two amplitudes of the waves and that would be 1.25 m

Learn more about interference of waves:https://brainly.com/question/16622714

#SPJ1

It will take the car 3.2 seconds to hit the ground.

Using the kinematic equation,

y = yo + vot + 1/2a*t^2

where y is the displacement (in this case, y = -58 m), yo is the initial displacement (yo = 0), vo is the initial velocity (vo = 0), a is the acceleration due to gravity (a = -9.81 m/s^2), and t is the time we want to find.

We can solve for t by rearranging the equation:

t = sqrt(2*y/a)

t = sqrt(2*(-58)/(-9.81))

t = 3.2 seconds (to two significant figures)

Time taken is 3.2 seconds.

To know more about the time, here

brainly.com/question/13286600

#SPJ4

Answer:

The gravitational force between the Sun (mass = 1.99 × 1030 kg) and Mercury (mass = 3.30 × 1023 kg) is 8.99 × 1021 N

Explanation:

Answer:

Average force of gravitation between Mercury and the Sun is approximately 3.54 x 10^20 N.

Explanation:

The following equation determines the gravitational force between two objects:

F = G * (m1 * m2) / d^2

In this equation, F is the gravitational force, G is the gravitational constant (G = 6.67 x 10-11 Nm2/kg2), m1 and m2 are the objects' masses, and d is the space between their centres.

We need the masses of Mercury and the Sun as well as their typical separation in order to compute the average gravitational force between them.

The Sun's mass is roughly 1.989 x 1030 kg, while Mercury's mass is roughly 3.285 x 1023 kg. Mercury and the Sun are typically separated by around 57.9 million kilometres (0.39 astronomical units).

With these values entered into the formula, we obtain:

F is equal to G * (3.285 x 1023 kg) * (1.989 x 1030 kg) * (57.9 x 106 m) * 2

F is equal to G * (3.285 x 1023 kg) * (1.989 x 1030 kg) * (57.9 x 106 m) * 2

F = 3.54 x 10^20 N

To learn more about force of gravitation visit: https://brainly.com/question/21500344