An atomic orbital is a mathematical function that describes the probability distribution of finding an electron in an atom.
The following are the characteristics of an atomic orbital:
Probabilistic: An atomic orbital describes the probability of finding an electron at a particular point in space, rather than its exact location.
Three-dimensional: Atomic orbitals are three-dimensional functions that describe the electron distribution in all directions.
Energy level: Atomic orbitals are associated with specific energy levels, and the energy level determines the size and shape of the orbital.
Quantized: The energy levels and electron distributions in atomic orbitals are quantized, meaning that they can only have certain discrete values.
Electron cloud: Atomic orbitals can be thought of as an electron cloud, which describes the probability of finding an electron at any point within the orbital.
To learn more about Atomic orbital :
https://brainly.com/question/29561958
#SPJ4
What is an Iron Ring used for in chemistry?
Answer:
A circular iron rod with a clamp for use on a ring stand.
Explanation:
An iron ring is a circular iron rod that has a clamp that can be used to mount it on a ring stand. The iron ring serves to hold glassware, such as a flask, so that the glassware will not tip over, and is usually employed when the glassware may need to be heated, such as a Bunsen burner that can be placed underneath.
how does the existence of atoms explain the conservation of matter?
The presence of atoms provides an explanation for the conservation of matter since they are the smallest units of matter that nevertheless retain the chemical characteristics of the element they represent.
Atoms can only be rearranged into different combinations to produce new compounds because they are indivisible and cannot be created or destroyed.
The law of conservation of matter, which asserts that the overall amount of matter in a closed system stays constant even when individual atoms and molecules may be rearranged by chemical interactions, is based on the concept of indestructible atoms.
In other words, a system has the same number of atoms both before and after a chemical reaction, and its overall mass is constant. The law of conservation of matter holds true for all chemical reactions, which is made possible by the fact that atoms are indivisible and cannot be generated or destroyed.
Want to know more about atoms visit the link which is given below;
https://brainly.com/question/13981855
#SPJ4
What is the mass of 2.80 moles of H2O
The mass of 2.80 moles of H2O is approximately 50.441 grams.
What is a molar mass ?
Molar mass is the mass of one mole of a substance and is expressed in units of grams per mole (g/mol). It is calculated by summing the atomic masses of all the atoms in a molecule, and it is expressed in the same units as atomic mass, which is atomic mass units (amu).
The molar mass of water (H2O) is 18.01528 g/mol (2 hydrogen atoms with atomic mass 1.008 and 1 oxygen atom with atomic mass 15.999).
To find the mass of 2.80 moles of H2O, we can use the following formula:
mass = number of moles x molar mass
Plugging in the values, we get:
mass = 2.80 mol x 18.01528 g/mol
mass = 50.441 g
Therefore, the mass of 2.80 moles of H2O is approximately 50.441 grams.
Learn more about molar mass here : brainly.com/question/22503632
#SPJ1
how to tell if a molecule is polar
When the common pair of electrons between the two molecules is not at an equal distance, the covalent bond compound is said to be polar.
The difference in electronegativity between the two elements must be between 0.5 and 1.6 for a bond to be polar. The bond is nonpolar if the difference in electronegativity is smaller than 0.5. If the ratio is more than 1.6, the molecules instead form charged ions and ionic bonds. We will also be aware of it. The molecule is nonpolar if the arrangement is symmetrical and the lengths of the arrows are equal. The molecule is unstable if the arrows have various lengths and do not balance one another.
To know more about Polar molecule, visit,
https://brainly.com/question/1433127
#SPJ4
How do you find the molecular weight of HCl?
Hydrogen chloride HCl has a molecular weight of 36.458.
HCl has a molecular weight of 1.008 plus 35.45.
To find the molecular weight of HCl (hydrogen chloride), you need to know the atomic masses of hydrogen (H) and chlorine (Cl), and then sum them up according to the chemical formula of HCl.
The atomic mass of hydrogen is approximately 1.008, and the atomic mass of chlorine is approximately 35.45. The molecular formula of HCl is H1Cl1, which means it contains one atom of hydrogen and one atom of chlorine.
To find the molecular weight of HCl, you can add the atomic masses of hydrogen and chlorine:
1) Molecular weight of HCl = Atomic mass of hydrogen + Atomic mass of chlorine
2) Molecular weight of HCl = 1.008 + 35.45
3) Molecular weight of HCl = 36.458
The molecular weight of HCl is approximately 36.458 g/mol.
To learn more about Hydrogen chloride :
https://brainly.com/question/19053776
#SPJ4
Mutations occur at a rate of 1 per 1010 base pairs per generation. aureus has 2.8 × 106 base pairs in its genome. Therefore, approximately 0.0028 mutations will occur per cell in the population. At the end of 12 hours, how many mutations will be present in the population of S. aureus in the wound in your foot? What are the implications of this genetic diversity in the context of treating a possible infection?
After, after 12 hours, we would anticipate roughly 27 mutations to be present in the S. aureus population in your foot wound.
Part 1-
First, the size of the S. aureus population in the wound in your foot should be found. Let's assume that the population size is 1 million (1 x 10^6) cells.
The mutations estimated in one generation per cell are:
1 mutation per 10¹⁰base pairs
The base pairs in the genome of S. aureus are 2.8 x 10⁶
Therefore, the expected number of mutations per generation per cell is:
(2.8 x [tex]10^{6}[/tex]) / ([tex]10^{10}[/tex]) = 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation
To estimate the number of mutations in the population which occur after 12 hours the number of generations that have passed needs to be known. The generation time of S. aureus is approximately 30 minutes, so the number of generations in 12 hrs (hours) will be:
12 hrs x (60 minutes/hr) / (30 minutes/generation)
= 24x4 equals 96 generations
In 96 generations the approximate number of mutations per cell is:
96 generations x 2.8 x [tex]10^{-4}[/tex] mutations per cell per generation
= 0.027 mutations per cell
If we multiply mutations per cell by the number of cells in the population, to know the total number of mutations in the population:
i.e.,0.027 mutations taking place per cell x 1 x 10⁶ cells gives 27 mutations
Therefore, after 12 hours, we can expect approximately 27 mutations to be present in the population of S. aureus inside the wound in your foot.
Estimatedly, 0.0028 mutations will take place per cell in the population. After the end of 12 hours, 0.0028 * 16,777,216 = 46,976 new mutations will exist.
Part 2-
The implications of this genetic diversity in the context of treating possible infections is that host genetic diversity is thought to reduce the possibility that the disease will widen in natural populations.
To know more about mutations,
brainly.com/question/14438201
#SP J4
what is the role of detergent, ethanol, and salt in the extraction process?
The use of detergent, ethanol, and salt in the extraction process can help to improve the efficiency and selectivity of the extraction process, depending on the specific requirements of the experiment or application.
Detergent can be used to break up cell membranes and other barriers that might prevent the desired molecules from being extracted. It can also help to solubilize hydrophobic molecules by forming micelles.
Ethanol can be used as a solvent to extract polar and non-polar compounds. It can also be used to precipitate certain molecules, such as nucleic acids, by disrupting the hydrogen bonding and hydrophobic interactions between molecules.
Salt can be used to disrupt the hydrogen bonding and hydrophobic interactions between molecules, and can also be used to increase the solubility of certain molecules. In addition, it can be used to create a salt gradient, which can be useful for separating molecules based on their size or charge using techniques such as dialysis or gel filtration chromatography.
Learn more about chromatography:
https://brainly.com/question/26491567
#SPJ4
Can somebody help me with these (in the pictures) I’m confused! Thanks!
The pressure exerted by the individual gases in a mixture is called the partial pressure. Here the equilibrium partial pressure of PCl₅ is 0.038 , PCl₃ is 0.662 and Cl₂ is 0.662.
What is equilibrium constant?The ratio of the product of molar concentrations of the products to that of the reactants with each concentration term raised to a power equal to its coefficient in the balanced chemical equation is the equilibrium constant.
In terms of partial pressures, equilibrium constant Kp is:
Qp = pPCl₅ / (pPCl₃ ) (pCl₂)
= 0.20 / 0.5 × 0.5
= 0.8
Here Qp > Kp, so the reaction shift towards reactant side.
The ICE table is:
PCl₃ + Cl₂ ⇄ PCl₅
I 0.50 0.50 0.20
C +x +x -x
E 0.50 + x 0.50 + x 0.20 - x
Kp = 0.200 -x / (0.5+x)(0.5+x)
0.0870 = 0.200 -x / (0.5+x)(0.5+x)
x = 0.162
The equilibrium partial pressures of PCl₃ and Cl₂ are:
0.5 + x = 0.5 + 0.162 = 0.662 atm
The equilibrium partial pressures of PCl₅ is:
0.200 - 0.162 = 0.038 atm
Thus the equilibrium partial pressures of PCl₃ , PCl₅ and Cl₂ are determined.
To know more about equilibrium constant, visit;
https://brainly.com/question/30620209
#SPJ1
what does homogeneous mean
Homogeneous is a term used to describe a mixture or substance that is uniform in composition and properties throughout.
In other words, it is a mixture or substance that has the same appearance and consistency throughout its entirety. This is in contrast to a heterogeneous mixture or substance, which has different compositions and properties in different parts of the mixture or substance.
An example of a homogeneous mixture is a solution of salt and water, where the salt is uniformly distributed throughout the water. An example of a heterogeneous mixture is a bowl of cereal, where there are different types of cereal and pieces of fruit mixed together.
Homogeneous mixtures and substances are easier to work with in scientific experiments and industrial processes, as they have predictable and consistent properties.
To know more about Homogeneous here:
https://brainly.com/question/30583932#
#SPJ11
N8H10 help for Chen pleased
How could your understanding of erosion and deposition help identify where to pan for gold?
Erosion is the process through which the earth's surface wears away. Erosion is a process that lowers the surface. And the process of deposition, which is the collection of materials transported by streams and slopes, rebuilds the surface.
What is erosion ?Earthen materials are worn away during erosion, a geological process in which they are moved by wind or water. Weathering, a related process that does not involve movement, dissolves or breaks down rock.
Inside a medium-sized pan, panning employs water to separate heavy gold particles from other lighter ones. In this procedure, water and sediment or ore presumed to contain gold are added to a large, curved pan. In order to discharge lighter sediments, the miner moves the pan repeatedly.
Thus, In streams and rivers, it has increased pollution and sedimentation, blocking these waterways and resulting in a loss in fish and other species.
To learn more about the erosion, follow the link;
https://brainly.com/question/30587260
#SPJ9
Which group would generally have the lowest first ionization energy?A) Transition MetalsB) Alkali MetalsC) Noble GasesD) Alkaline Earth MetalsE) Halogens
Alkali metals exhibit the lowest first ionization energy.
Alkali metals are a group of elements. Their standard valence shell setup is ns1. Sodium (Na), Potassium (K), Rubidium (Rb), Cesium (Cs), Lithium (Li), Hydrogen (H), and Lithium are some of them (Cs).
The alkali metal with the lowest ionization energy is cesium.
What is ionization energy?Ionization energy is the energy required to remove an electron from a neutral atom or a positive ion. It is a measure of the tendency of an atom or ion to lose an electron and become a cation. The ionization energy is usually expressed in units of electron volts (eV) or kilojoules per mole (kJ/mol). The first ionization energy is the energy required to remove the outermost electron from an atom in its ground state, while the second ionization energy is the energy required to remove the second outermost electron, and so on. Generally, the ionization energy increases as we move across a period in the periodic table, and decreases as we move down a group. This is because as we move across a period, the effective nuclear charge increases, which makes it more difficult to remove an electron from the outermost shell.
To learn more about the ionization energy, click the given link ;
brainly.com/question/20658080
#SPJ4
In a region where there is a uniform electric field, the potential, v1, is 1. 3 v at position y1=26 cm. At position y2=28 cm , the potential, v2, is 3. 9 v. What is the potential at position y3=32 cm ?.
The magnitude of the y-component of the electric field in this region exists 1.3 V/cm.
What is meant by magnitude?The measurement or absolute value of an amount is known as a magnitude. Positive real numbers are used to express magnitudes. The size of some quantity is known as its magnitude, to put it simply.
A seismic event's magnitude is its numerical value. It is a particular value independent of the epicentre's location or direction.
One cannot have a negative magnitude. The part of the vector's length that lacks direction is its length (positive or negative). The values in the summation are squared in the formula and are therefore positive.
Since [tex]V_1[/tex] exists 1.3 V at position [tex]y_1[/tex] = 26 cm. At position [tex]y_2[/tex] = 28 cm, the potential, [tex]V_2[/tex], is 3.9 V
Let the equation be
[tex]$& E=\frac{V_2-V_1}{Y_2-Y_1} \\[/tex]
substitute the values in the above equation, we get
[tex]$& =\frac{3.9-1.3}{28-26} \\[/tex]
simplifying the equation, we get
[tex]$& =\frac{2.6}{2} \\[/tex]
= 1.3 V/cm
Therefore, the potential at position [tex]y_3[/tex] = 32 cm be 1.3 V/cm.
To learn more about magnitude refer to:
https://brainly.com/question/30337362
#SPJ4
Give group 18 periodic table
The group 18 in the periodic table is the noble gases. The elements are The elements are helium , neon , argon, krypton, xenon, radon, and oganesson.
The group 18 group belongs to the noble gases in the periodic table and the elements belongs to the group 18 is as follows :
Helium Neon Argon Krypton Xenon Radon Oganesson.The Group 18 is also called as the zero group because the elements belongs to this group have the zero valency or the tendency to react with other elements also is zero. That means they are chemically unreactive and they are the most stable elements in the periodic table.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
Why is KNO3 ionic and covalent?
Potassium nitrate, KNO3 has both ionic and covalent bonds. Ionic bond due to the attraction between oppositely charged particles and covalent due to the presence of a double bond.
KNO₃ (potassium nitrate) consists of potassium (an alkali metal) and nitrogen and oxygen (which are both gases and "non-metals"). We have a molecule of potassium nitrate, KNO₃, it contains the cation K⁺ and the polyatomic anion NO³⁻. An ionic bond is one in which one or more valence electrons from one atom are completely transferred to another atom, forming two oppositely charged atoms or ions. A covalent bond is formed when electron pairs are shared by both atoms. Now the bond in potassium nitrate is ionic, resulting from the electrostatic attraction between the K⁺ and NO³⁻ ions. There is also a covalent bond that works in the nitrate anion. The usual Lewis structure shows a quaternized nitrogen (ie nitrogen with a formal positive charge), an N=O double bond, and a single covalent bond. So both ionic and covalent bonding between nitrogen and oxygen atoms in NO³⁻ exist.
To learn more about ionic bond, refer:
https://brainly.com/question/957239
#SPJ4
True or False? the rate limiting step in a reaction is the slowest step in the reaction sequence.
The given statement is true. The rate limiting step in a reaction is the slowest step in the reaction sequence.
In chemical kinetics, the slowest step, sometimes referred to as the rate-determining step or rate-limiting step, frequently roughly determines the total pace of a reaction.
The reaction's slowest step is used to generate the rate equation. Writing rate equals the rate constant of the slowest step times the concentrations of the reactant or reactants raised to their reaction order is how you build up a rate equation.
2A + B → C + D using the following two stages, the first step is referred to as the rate-determining step of the reaction since the total rate of the reaction is equal to the rate of the slow first step. The rate of the reaction in the aforementioned equation depends on the rate constant k.
Learn more about rate limiting step here brainly.com/question/14923179
#SPJ4
2. 100cm³ of 0. 05M tetraoxosulphate (VI) acid was placed in a flask and a small quantity of anhydrous sodium trioxocarbonate (IV) was added. The mixture was boiled to expel CO2, cooled and the volume restored by the addition of distilled water to 100cm³. 22cm³ of the solution then required 15cm³ of 0. 10M NaOH solution to neutralize it. What was the mass of sodium trioxocarbonate (IV) added?
The mass of sodium trioxocarbonate (IV) added is 0.106 g.
To find the mass of sodium trioxocarbonate (IV) added, we need to use the balanced chemical equation and the concept of molarity.
The balanced chemical equation for the reaction is:
H₂SO₄ + Na₂CO₃ → Na₂SO₄ + H₂O + CO₂From the question,
We know that the volume of tetraoxosulphate (VI) acid is 100 cm³ and its molarity is 0.05 M. We also know that the volume of NaOH solution required to neutralize the solution is 15 cm³ and its molarity is 0.10 M.1. Using the formula M₁V₁ = M₂V₂, where M₁ and V₁ are the molarity and volume of the first solution and M₂ and V₂ are the molarity and volume of the second solution, we can find the moles of NaOH required to neutralize the solution:
0.10 M × 15 cm³ = 0.05 M × V₂V₂ = 30 cm³
2. Since the balanced chemical equation shows that 1 mole of NaOH is required to neutralize 1 mole of H₂SO₄, we can use the same formula to find the moles of H₂SO₄ in the solution:
0.05 M × 100 cm³ = 0.10 M × V₂V₂ = 50 cm³
3. Since the volume of the solution after the addition of sodium trioxocarbonate (IV) is 100 cm³, the moles of H₂SO₄ that reacted with sodium trioxocarbonate (IV) is:
50 cm³ - 30 cm³ = 20 cm³Using the formula M₁V₁ = M₂V₂,
4. We can find the moles of sodium trioxocarbonate (IV) that reacted with H₂SO₄:0.05 M × 20 cm³ = 0.10 M × V₂V₂ = 10 cm³
Since the balanced chemical equation shows that 1 mole of Na₂CO₃ is required to react with 1 mole of H₂SO₄, the moles of Na₂CO₃ is equal to the moles of H₂SO₄:10 cm³ × 0.10 M = 1 × 10⁻³ moles of Na₂CO₃
5. To find the mass of sodium trioxocarbonate (IV) added, we can use the formula mass = moles × molar mass:The molar mass of Na₂CO₃ is 106 g/mol, so the mass of sodium trioxocarbonate (IV) added is:1 × 10⁻³ moles × 106 g/mol = 0.106 gTherefore, the mass of sodium trioxocarbonate (IV) added is 0.106 g.
Learn more about sodium trioxocarbonate at: https://brainly.com/question/19039594
#SPJ11
What is the empirical formula for a compound with a molecular formula of C12H18N606?
Type the subscripts in the blanks
The empirical formula for a compound with a molecular formula of C₆H₉N₃O₃.
What is empirical formula?Empirical formula of a compound is defined as the simplest whole number ratio of atoms which are present in a compound.It does not make any mention of the arrangement of atoms or the number of atoms. The empirical formula gives information about the ratio of number of atoms which are present in a compound.
Molecular formula is determined from the empirical formula by dividing the molar mass of a compound by the empirical formula mass. The resultant which should be a whole number or very close to the whole number , then the subscripts are multiplied by the whole number to get the molecular formula.The mentioned empirical formula is obtained by dividing molecular formula by 2.The empirical formula is obtained as , molecular formula/2=C₁₂H₁₈N₆O₆/2=C₆H₉N₃O₃
Learn more about empirical formula,here:
https://brainly.com/question/14044066
#SPJ9
as the temperature increases, does the reaction rate increase or decrease?
The reaction rate increases as the temperature increases.
What is a temperature?
Temperature is a measure of the average kinetic energy of the molecules in a substance, typically measured in units of degrees on the Celsius (°C) or Fahrenheit (°F) scale. It is a fundamental physical property that determines whether a substance is a solid, liquid, or gas. Temperature also affects the properties of a substance, such as its boiling and freezing points, the speed at which chemical reactions occur, and the density of a substance.
This is because as the temperature rises, the molecules gain more energy and move around faster, increasing the number of collisions between the reactant molecules. This increases the probability of successful collisions that lead to the formation of the desired product, resulting in an increase in reaction rate.
Therefore, reaction rate increases as the temperature increases.
To learn more about temperature from the link
https://brainly.com/question/11464844
#SPJ4
what term is used to describe the substance that is totally consumed in a chemical reaction?
Answer:
limiting reagent is used to describe the substance that is totally consumed in a chemical reaction
PLEASE HELP ---- S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
In the above equation how many moles of water can be made when 85 moles of HNO3 are consumed?
2moles of H2O are made when 6moles of HNO3 are consumed
75 mole of HNO3 produces = [tex]\frac{2}{6}[/tex]× 75 ⇒ 25 moles of water
Limiting Reagent Method
The limiting reagent is the reactant that is completely used up in a reaction and thus determines when the reaction stops.
S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
6 mole of HNO3 produces [tex]\frac{2}{6}[/tex] = 2 moles of H₂O
1 mole of HNO3 produces = mole of H₂O
∴ 75 mole of HNO3 produces = [tex]\frac{2}{6}[/tex] × 75 ⇒ 25 moles of water
6. How many grams of CO₂ will be formed in a reaction that should produce 1600 grams but proceeds with a 87% yield?
If the reaction has a 87% yield, then it will produce 1392 grams of CO₂.
What are limiting reactants?The limiting reactant, also known as the limiting reagent, is a substance in a chemical reaction that is fully consumed before the other reactants and determines the maximum amount of product that can be formed. In a reaction mixture, the limiting reactant is the one that runs out first and therefore limits the amount of product that can be formed.
The amount of limiting reactant in a reaction determines the amount of product that can be formed, and the amount of other reactants will be left over. If the reaction yields 87%, it will generate 1600 x 87% = 1392 grams of CO2.
Learn more on limiting reactants here: https://brainly.com/question/14222359
#SPJ1
What alkaline earth metal is used in fireworks?
Alkaline earth metals which are used in fireworks are aluminium, antimony, calcium etc.
The alkaline earth metals are six compound components in bunch 2 of the periodic table. They are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). The components have very much like properties: they are gleaming, shimmering white, fairly responsive metals at standard temperature and pressure.Fundamentally, they (along with helium) share for all intents and purpose an external s-orbital which is full — that is, this orbital contains its full supplement of two electrons, which the basic earth metals promptly lose to frame cations with charge +2, and an oxidation condition of +2.
Helium itself is a noble gas and not an alkaline earth metal, however it is conjectured to have a few likenesses to beryllium when constrained into holding and has once in a while been recommended to have a place with group 2.
To know more about alkaline earth metals,visit here:
https://brainly.com/question/12835232
#SPJ4
draw the structure of the product formed when benzoic acid is treated with aqueous sodium hydroxide.
The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group
When benzoic acid is treated with aqueous sodium hydroxide, it undergoes a base-catalyzed reaction known as saponification. The products of this reaction are sodium benzoate and water. The balanced chemical equation for this reaction is:
C6H5COOH + NaOH → C6H5COONa + H2O
In this equation, NaOH is the sodium hydroxide and C6H5COOH is the benzoic acid. The product, C6H5COONa, is sodium benzoate, which is a white crystalline powder that is soluble in water.
The structure of sodium benzoate can be represented as follows:
O
||
-C-O-Na+
||
C
The sodium ion (Na+) is ionically bonded to the carboxylate group of benzoic acid, replacing the hydrogen ion (H+) in the carboxylic acid group. The resulting compound, sodium benzoate, is a salt that is more soluble in water than the original benzoic acid, which is sparingly soluble in water.
For such more questions on Aqueous
https://brainly.com/question/19587902
#SPJ4
Each different signal in a 1H NMR spectrum represents a different__________of hydrogen atom. Hydrogen atoms that are_______________give the same signal.
One type of hydrogen atom is represented by each distinct signal in a 1-H NMR spectrum. The signal is the same for equivalent hydrogen atoms.
In physics, a spectrum is a distribution of some physical quantity as a function of a variable, such as frequency, wavelength, or energy. The term "spectrum" is commonly used to describe the range of colors of visible light, which is known as the visible spectrum and includes all the colors of the rainbow. However, spectra can also refer to other forms of radiation, such as the electromagnetic spectrum, which includes radio waves, microwaves, infrared radiation, ultraviolet radiation, X-rays, and gamma rays. Spectra can be used to identify and study the properties of matter, such as the chemical composition of a substance, the temperature of a hot object, or the motion of a distant star. Spectroscopy is the scientific field that deals with the analysis of spectra and are widely used in many areas of science and technology.
Learn more about spectrum here:
https://brainly.com/question/28898105
#SPJ4
All parts of the question.
HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant. The limiting reactant, also known as the limiting reagent.
What is limiting reactant?In a chemical reaction, the limiting reactant, also known as the limiting reagent, controls how much product is produced. Calculating the theoretical yield of such a reaction is achievable if the limiting reactant has been identified.
Because elements and compounds in a balanced chemical system react in accordance with their mole ratios, there must be a limiting reactant.
HgO + 2Cl[tex]_2[/tex] →HgCl[tex]_2[/tex] + Cl[tex]_2[/tex]O
moles of HgO =11.50/ 216.5=0.05moles
moles of Cl[tex]_2[/tex] =12.46/70.9=0.17moles
To find the limiting reactant, divide the moles by stoichiometry. HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.
Therefore, HgO is the limiting reactant. Cl[tex]_2[/tex] is the excess reactant.
To know more about limiting reactant, here:
https://brainly.com/question/28945068
#SPJ1
The amount of energy required to remove an electron from an isolated atom or molecule is called: ________
The amount of energy required to remove an electron from an isolated atom or molecule is called: ionization energy.
Ionization energy is the amount of energy required to remove an electron from an atom or molecule in the gas phase, resulting in the formation of a positively charged ion.
In other words, it is the minimum energy required to remove an electron from the outermost shell (valence shell) of an atom or molecule.
The ionization energy is measured in units of joules per mole (J/mol) or electron volts (eV).
It is an important property of atoms and molecules, as it determines their chemical reactivity and ability to form chemical bonds. Atoms with low ionization energies tend to be more chemically reactive and are more likely to form chemical bonds with other atoms, while atoms with high ionization energies are less reactive and less likely to form chemical bonds.
Learn more about Ionization energy here: https://brainly.com/question/1445179
#SPJ4
In Part C of the experiment, you added a 6.0 NaOH solution to the aqueous solution of NaCl. Did the addition of the NaOH solution change the identity of the NaCl solute in the water? If so indicate the new identity.
Group of answer choices
a. Yes. Adding NaOH changed the NaCl to NaOH
b. No. Adding NaOH did not change the identity of the NaCl
c. Yes. Adding NaOH changed the NaCl to NaHClO
d. Yes. Adding NaOH changed the NaCl to NaClO
e. Yes. Adding NaOH changed the NaCl to water
No. Adding NaOH did not change the identity of the NaCl. (option b). When NaOH (sodium hydroxide) is added to an aqueous solution of NaCl (sodium chloride), a chemical reaction occurs, which is called a neutralization reaction.
This reaction forms NaCl (sodium chloride) and H2O (water) as the end products. The chemical equation for this reaction can be represented as follows:
NaCl + NaOH -> NaCl + H2O.As we can see from this equation, NaCl is not changed and remains in its original form, only the OH- ions from NaOH react with the H+ ions from HCl to form water. Therefore, the identity of NaCl remains unchanged even after the addition of NaOH solution.
Learn more about Aqueous Solution:
https://brainly.com/question/19587902
#SPJ4
All of the following pairs of ions are isoelectronic except which one?A) Al^3+ and N^3-B) Fe^2+ and Co^3+C) Fe^2+ and Mn^3+D) K^+ and Ca^2+E) Zn^2+ and Cu^+
Isoelectronic ions include O2, F, Na+, Mg2+, and Al3+.
Are Al3+ and Na+ isoelectronic?Despite the fact that Na+ and Al3+ have identical electron configurations, Al3+ has a smaller ionic radius than Na+. Reason: Compared to Na+, Al3+ has a larger effective nuclear charge on the outer shell electrons. Both Assertion and Reason are true, and Assertion's explanation by Reason is accurate.
N3 and Ne are they both electronic?Atoms with the same electronic configuration or equal numbers of electrons are referred to as isoelectronic species. N3-, O2-, F-, Ne, Na+, Mg2+, and Al3+, for instance, are a number of isoelectronic species.
To know more about Isoelectronic visit:-
https://brainly.com/question/24720764
#SPJ1
What is the appearance of 9,10-dihydroanthracene 9 10 α β succinic acid anhydride?
In its relatively pure form, (9,10-dihydroanthracene-9,10-succinic acid anhydride) is probably white and very crystalline.
What is the literature melting point of 9,10-dihydroanthracene 9 10 α β succinic anhydride?Anthracene is a polycyclic aromatic hydrocarbon that gives rise to the chemical molecule 9,10-dihydroanthracene. Dihydroanthracene has a number of isomers, although the most prevalent one is its 9,10 derivative.
This substance's CAS registry number is 5443-16-3 and it is also known as 9,10-dihydroanthracene-9,10-succinic acid anhydride. Even with this number, it may be challenging to locate physical information on this substance. Its melting point is 261-262 °C, and its molecular weight is 267.2861 g/mol.
In its relatively pure form, (9,10-dihydroanthracene-9,10-succinic acid anhydride) is probably white and very crystalline. Crystals without colour are produced after recrystallization; their melting point is 260–263 °C.
The remaining substance in the vial most likely ranges in hue from yellow-green to dark green and is primarily composed of 9,10-dihydroanthracene-9,10-succinic acid anhydride. It is coloured due to minute levels of oxidised anthracene.
To learn more about succinic acid anhydride refer to:
https://brainly.com/question/15719562
#SPJ4