What is a 3 sided called?

Anael can not use the fourth board measurement. This can be solved by using the concept of inch scale.

A centimeter is smaller than an inch. On the other side of the centimeter ruler, inches are denoted by the large, continuous hash marks that are inscribed above the digits. On a ruler, the inch is the largest unit and is denoted by the longest line. There is a number next to each 1-inch line on the ruler that designates.

Since the international yard was adopted in the 1950's and 1960's, standards for the precise length of an inch have fluctuated, but the inch is now based on the metric system and is defined as precisely 25.4 mm.

The question given here,

the first board measurement: [tex]99\frac{3}{4} =[/tex] 99 inch ± 0.75 inch

the second board measurement: [tex]99\frac{7}{8} =[/tex] 99 inch ± 0.875 inch

the third board measurement: [tex]100\frac{1}{6} =[/tex] 100 inch ± 0.16 inch

the fourth board measurement: [tex]100\frac{5}{16} =[/tex] 100 inch ± 0.3125 inch

the fifth board measurement: [tex]99\frac{13}{16} =[/tex] 99 inch ± 0.8125 inch

Thus, Anael can not use the fourth board measurement.

To know more about inch scale refer to:

https://brainly.com/question/261465

#SPJ1

I think that the answer would be 14

Answer:

28.2, 27.63, 27.54, 27.5, 27.22

Answer: 28.2, 27.62,27.5,27.22

Step-by-step explanation:

Answer: (2x+6y)^2 = (2x+6y)(2x+6y) = 4x^2 +12xy + 12yx + 36y^2 = 4x^2 + 24xy + 36y^2

So the result of (2x+6y)^2 is 4x^2 + 24xy + 36y^2

Answer:

0.07

Step-by-step explanation:

lets make a chart first

           small | medium | large

hot     |   5      |     48     |    22

cold   |   8      |       1      |     5

1. add all the hot drinks

5+48+22=75

2. find 5/75,

5/75=0.0666666

The value of all four numbers will be 91, 98, 105, 112 respectively.

Let the first multiple be 7x

As the multiple of any number can be determined by simply multiplying the given number by the natural number or the counting numbers.

So, the value of the second multiple of 7 will be 7(x+1)

The value of third multiple of 7 will be = 7(x+2)

The value of fourth multiple of 7 will be = 7(x+3)

As all the multiple are consecutive so we have taken the multiplying factor as x, (x+1), (x+2) and (x+3)

From the data given in the question:

Sum = 7x+7x+7+7x+14+7x+21 = 406

=>28x+42=406

=>28x=364

=>x=(364/28)=13

So, the value of first multiple = 7x = (7*13) =91

So, the value of the second multiple of 7 will be 7(13+1)=98

The value of third multiple of 7 will be = 7(x+2)=7(13+2)=105

The value of fourth multiple of 7 will be = 7(x+3)=7(13+3)=112

For such more questions on Consecutive numbers

https://brainly.com/question/26024768

#SPJ4

The final value of a_5 is 27a.
The equation a_n=a_{n-1}+5a is a recursive formula that gives the value of a_n in terms of the value of a_{n-1}. To find the value of a_5, we need to apply this formula repeatedly, starting with the given initial value of a_1=7a.

Using the recursive formula:

a_2 = a_1 + 5a = 7a + 5a = 12a

a_3 = a_2 + 5a = 12a + 5a = 17a

a_4 = a_3 + 5a = 17a + 5a = 22a

a_5 = a_4 + 5a = 22a + 5a = 27a

so a_5 = 27a

This is the final result and no need to calculate more.

Thus the final value of a_5 is 27a.

To learn more about recursive formula,

Visit; brainly.com/question/8972906

#SPJ4

Answer:

1.centre

2.chord

3.chord

4.radius

5.diameter

BRAINLY ME PLEASE IF HELPFUL!!!

The graph of the following equation will be a Parabola. The y=1 will be the line of symmetry.

Three different parabolas exist. Vertex form, standard form, and intercept form are the three forms. You can access a unique key feature for the graph on each form.

A set of points in a plane that are equally spaced apart from a directrix or focus are known as parabolas. The difference in distances between a group of points that are situated in a plane and two fixed points—which is a positive constant—is what is referred to as the hyperbola.

To know more about hyperbola visit:-

brainly.com/question/28989785

#SPJ1

The Diwali occurred on 0.408 or 40.8% of the year in 2017.

To find the fraction of the year that Diwali occurred in 2017, we need to divide the number of days between Diwali and the start of the year by the total number of days in the year.

Diwali occurred on Thursday, October 19, 2017. The start of the year 2017 is January 1, 2017 which is a Sunday.

There are 365 days in a non-leap year. Since 2017 is not a leap year, there are 365 days in that year.

So the fraction of the year that Diwali occurred in 2017 can be calculated as: (days between Diwali and the start of the year) / (total days in the year) = ( 19 + 31 + 30 + 31 + 30 + 19 ) / 365 = (148) / 365 = 0.408

So, the Diwali occurred on 0.408 or 40.8% of the year in 2017.

Therefore, Diwali occurred on 0.408 or 40.8%

To learn more about fractions,

Visit; brainly.com/question/10354322

#SPJ4

The range between 3/16 & 3/8 is where the line plot with the difference of daily mileage logged by each racer in a group is still most obvious.

A line graph, liner plot, or line chart is a graph that uses lines to link the individual data points. For a specific time period, quantitative values are displayed as a line graph. Line graphs are widely used in finance to depict the past market movements of a securities or asset.

Here,

calculation

The number line indicates that there's more than or equal to 3 marks when there are 7 markings either on or to the right of 3. The fraction must first have the same denominators.

=> 3/8 x 2 = 6/16

=> 1/2 x 8 = 8/16, 3/8 x 2 = 6/16

=> 5/8 x 2 = 10/16, 1/2 x 8 = 8/16

Since they all have the same numerator, we can now compare them.

=> 3/16 - 1/16 = 2/16

=> 6/16 - 3/16 = 3/16

=> 8/16 - 6/16 - 2/16

=> 10/16 - 8/16 = 2/16

The largest distinction is between 3/16 and 3/8 (6/16 vs. 3/16).

The range between 3/16 and 3/8 is where the line plot with the difference in daily mileage logged by each runner in a group is most obvious.

To know more about line plot visit :-

brainly.com/question/29573088

#SPJ1

The complete question is " Coach Taylor asked his team to record the distance they ran during practice The line plot shows the number of miles the individual members in a group of runners run each day. How many runners run at least 3 miles per day?."

Answer:

13/4 as an improper fraction

3 1/4 as a mixed number fraction

Step-by-step explanation:

Turn 3 1/2 into an improper fraction

7/2 - 1/4

To write 7/2 as a fraction with a common denominator, multiply by 2/2

7/2 x 2/2 = 14/4

14/4 - 1/4 = 13/4

Time taken to cross the field will be 3.36 seconds.

Velocity is the rate and direction of an object's movement, whereas speed is the time rate at which an object is moving along a path. In other words, velocity is a vector, whereas speed is a scalar value. There are four different types of speed. constant speed, varying speed, an average rate, instantaneous speed.

Solution,

Given,

speed=60 mph

length of football field=0.056 miles

time taken to cross it = distance/speed

time=0.056/60=0.00093 hour = 3.36 seconds.

To know more about average visit:-

brainly.com/question/29829527

#SPJ4

Answer:

1) 39

2) 13

3) 2

Step-by-step explanation:

1) She had 22 books, she now has 61 books, so she bought 61-22 = 39 books at the yard sale.

2) 143/11 = 13

3) 6-4 = 2

Answer:

13/25

I hope this is the correct answer.

The total surface area of the hemisphere is 108 pi cm^2.

Surface area is the amount of space covering the outside of a three-dimensional shape. We calculate the surface area for three dimensional objects. The surface area of a 3-D object is not same as its volume.

The surface area of a sphere with the radius r is 4 pi r^2

The surface area of a hemisphere with the radius r = 2 pi r^2 +   pi r^2

where pi r^2 represents the area of the circular base of the hemisphere of radius r.

The surface area of a hemisphere sphere with the radius r is 3 pi r^2

For radius r=6cm

TSA of  the hemisphere is 3 pi (6x6) cm^2

TSA = 108 pi cm^2

108 pi cm^2 is the total surface area of a hemisphere with the radius 6 cm.

To know more  about sphere:

https://brainly.com/question/9994313

#SPJ4

The domain of a function with two variables is the set of all possible inputs (x-values and y-values) that make the function defined. To find the domain, first identify all of the restrictions on the x-values and y-values, then combine them into a single set of restrictions.

The domain of a function with two variables is the set of all possible inputs (x-values and y-values) that make the function defined. To find the domain, first identify all of the restrictions on the x-values and y-values. These restrictions may come from the function itself, such as any values that would make the function undefined, or from outside sources, such as boundaries placed on the function’s input. Once all of the restrictions are identified, they must be combined into a single set of restrictions. This set of restrictions defines the domain. For example, if the function is defined for all x-values between 1 and 5 and all y-values between -3 and 7, then the domain is all x-values between 1 and 5 and all y-values between -3 and 7. The domain of a function with two variables is an important part of understanding how the function behaves, as it defines the range of inputs for which the function is valid.

Learn more about domain here

https://brainly.com/question/13113489

#SPJ4

Step-by-step explanation:

bhshshssf just use some time and fouries and fouries and I don't have a car but who wants the French

Answer:

Step-by-step explanation:

These are the tests for similar triangles:

AA - if 2 pairs of corresponding angles are equal.  

SSS - if corresponding sides have the same ratio.

SAS - if 2 pairs of corresponding sides have the same ratio and the included angles are equal.

This diagram does not indicate any of these relationships exist.

Therefore the triangles are not similar.

Speed of the given object in centimeters per hour

= 0.23 cm / hour

Unit conversion is a process with multiple steps that involves multiplication or division by a numerical factor or, particularly a conversion factor. The process may also require selection of the correct number of significant digits, and rounding. Different units of conversion are used to measure different parameters.

Like 1 yard = 91.44 cm

1 month = 730 hrs.

Given,

Distance covered by the object = 11 yards

Distance covered in cm = 11 × 91.44 = 1005.84 cm

Time taken to cover 11 yards = 6 months

Time taken in hours = 6 × 730 = 4380 hrs.

Speed of the object = distance covered by the object / Time taken

Speed of the object = 1005.84/4380 = 0.2296 ≈ 0.23 cm per hour

Hence,  in centimeters per hour,

the speed of the object is 0.23 cm / hour.

Learn more about unit conversion here:

brainly.com/question/7171227

#SPJ1

Answer: 348

Step-by-step explanation: 12*29 = 348, which is the largest multiple less than 350.

Answer:

∠T = 130°

Step-by-step explanation:

The figure we are given is a quadrilateral, a 4 sided shape.

There are many different types of quadrilaterals, such as a rhombus, rectangle, etc.

How will we know which quadrilateral the given figure is?

We will have to look at the given properties of the figure to find out.

We are given that there are two adjacent pairs of congruent sides.

RS = RU, and ST = UT.

Thus, the given quadrilateral is a kite.

Now that we know that the given figure is a kite, we can utilize a kite's angle properties to find out ∠T.

In a kite, the non-vertex angles (∠S and ∠U) are congruent.

If ∠S = 60°, then ∠U = 60°.

In a kite, the sum of the interior angles is 360°.

Hence:

∠R + ∠S + ∠T + ∠U = 360°

Therefore, we can substitute the angles we know into the equation and solve for ∠T.

∠R + ∠S + ∠T + ∠U = 360°

110 + 60 + ∠T + 60 = 360

110 + 120 + ∠T = 360

230 + ∠T = 360

∴ ∠T = 130°

if this response helped you, please mark it the brainliest :)

Answer:

-8 [tex]\leq[/tex] -8

Step-by-step explanation:

-8[tex]\leq[/tex]2-10

-8[tex]\leq[/tex]-8

Answer:

-8

Step-by-step explanation:

-8≤2-10
2-10 = -8
-8≤-8

The side length of each square represent for the rectangle to correctly represent (0, 3) · (0, 5) is 1 units.

A rectangle represented by (0, 3) · (0, 5) has length 3 units and breadth 5 units. To represent that rectangles with minimum number of squares of same size, we calculate the highest common factor.

Highest Common Factor is a mathematical concept used to find the greatest number that divides two or more numbers without leaving a remainder. It is also known as the greatest common divisor (GCD) or the greatest common factor (GCF).

Highest common factor of 3 and 5 is 1 as both are prime numbers. So squares with side length 1 unit best represent the rectangle to correctly represent (0, 3) · (0, 5).

To know more on HCF

https://brainly.com/question/29114178

#SPJ4

Just re dot the points like mirror it on where ever on the graph

Use the same x-coordinate and the y-opposite coordinate's to reflect a point on the x-axis. Use the same y-coordinate and the x-opposite coordinate's to reflect a point on the y-axis.

A point can be reflected in the x-axis, y-axis, or both axes.

Due to identical x-coordinates and opposing y-coordinates, the red spots on the x-axis are mirror reflections of one another. Thus, in opposing directions and 3 units away from the x-axis, are the red spots. A reflection in the x-axis is shown by the red spots.

Due to the identical y-coordinates and opposing x-coordinates, the blue spots on the y-axis are mirror reflections of one another. the blue points are thus

To be learn more about identical refer to:

https://brainly.com/question/20427661?referrer=searchResults

#SPJ1

The correct option regarding the high tide and the low tide is given as follows:

B. high tide at 6 a.m. and 6 p.m., depth of 28 ft.

low tide at 12 midnight and 12 noon, depth of 20 ft.

The cosine function is defined as follows:

g(x) = acos(bx+c)+d.

The coefficients have these following roles:

The amplitude for this problem is of 4, with a vertical shift of 24, hence the low and high tides are given as follows:

The function is reflected over the x-axis, due to the multiplication by the negative number, hence the low tide is at midnight.

The period of the function is given as follows:

2π/(π/6) = 12 hours.

Thus the low tide also happens at noon, meaning that option B is correct.

More can be learned about cosine functions at brainly.com/question/21558626

#SPJ1

The graph that is not a straight line does not represent a direct variation.

Direct variation of a quantity {y} with respect quantity {x} means that the value of {y} increases as the the value of {x} increases. Mathematically -

y = Kx

K = y/x

where -

{K} is scale factor.

Given are the graphs representing direct variation.

Direct variation is represented by the equation -

y = kx

The graphs representing the direct variation are straight lines. Since all the graphs are not given, any graph that is not a straight line does not represent a direct variation.

Therefore, the graph that is not a straight line does not represent a direct variation.

To solve more questions on direct variation, visit the link below -

brainly.com/question/14254277

#SPJ1

David's deposit of $220 compounded continuously at a rate of 1.7% will become $260 after 10 years.

Here we have been given that David invested $220.

The interest rate was 1.7%

Since the amount was compounded continuously, there is no fixed date of when it was compounded, the whole process is taken as an exponential distribution.

There were no withdrawals or additional deposits to this, so our Principal is constant. Hence we can write the formula

Amount = Principal X eᵃˣ

where a = rate of interest/100

x = time

Therefore, we can say that

Ampunt after 10 years = 220 X e¹⁰ ˣ ⁰°⁰¹⁷

= $260.76707

rounding off to the nearest 10 dollars we get

= $260

Hence David's deposit of $220 compounded continuously at a rate of 1.7% will become $260 after 10 years.

To learn more about Compound Interest visit

https://brainly.com/question/19522540

#SPJ4

The two angles that have the sum of angles as 90° are called as Complementary Angles .

What are Complementary Angles ?

The two angles are said to be complimentary Angles when the sum of two angles is 90° .

In other words, we can say that if the measure of two angles add up to form a right angle, then these angles are called as Complementary Angles.  We can also say that  the two angles complement each other.

For Example : the angles having the measure of 30 degree and 60 degree can be called as Complimentary as their sum adds up to 90 degree .

Learn more about Complimentary Angles here

https://brainly.com/question/1425570

#SPJ4