Answer:
According to the kinetic molecular theory of gases, the average speed and kinetic energy of gas molecules would INCREASE.
Explanation:
In the kinetic molecular theory of gases, assumptions were made based on macroscopic properties of gas (pressure, volume and temperature) which are as a result of the microscopic properties like the position and the speed of the gas molecules. The kinetic molecular theory explains the behaviour of gases through the following 5 assumptions made about an ideal gas;
--> Molecules of a gas are in constant and rapid motion in straight lines until they collide with one another and with the walls of their containers.
--> The actual volume occupied by the had is negligible compared with the volume of the container.
--> Forces of attraction or repulsion between the molecules of a gas are negligible
--> The collision between the molecules is perfectly elastic.
--> The average kinetic energy of the gas molecules is proportional to the temperature of the gas.
Because gas molecules are in constant motion, it has kinetic energy which can be altered when there is increase in pressure. An increase in pressure will cause gas molecules to collide more frequently with one another. This in turn leads to increase in average speed and the kinetic energy of the individual molecules.
all stoichiometry problems are solved by convertng the _________ nto the units that are looking for(moles or grams)
All stoichiometry problems are solved by converting the given amount of a substance into the units that you are looking for (moles or grams).
Step-by-step explanation:
1. Identify the given substance and the units (grams or moles) you need to find for the other substance in the reaction.
2. Convert the given amount to moles using the substance's molar mass if it is provided in grams.
3. Use the stoichiometric coefficients (numbers in front of the chemical formulas) from the balanced chemical equation to determine the ratio of moles between the given substance and the substance you are solving for.
4. Multiply the moles of the given substance by the mole ratio to find the moles of the substance you are looking for.
5. If the final answer needs to be in grams, convert the moles of the substance you found into grams using its molar mass.
Thus, you must convert the given amount of a substance into the desired unit (moles or grams) in order to solve stoichiometry questions.
To learn more about stoichiometry visit:
https://brainly.com/question/14935523
#SPJ11
A solution contains 0.0470 M Ca2 and 0.0930 M Ag . If solid Na3PO4 is added to this mixture, which of the phosphate species would precipitate out of solution first
The phosphate species that would precipitate out of solution first when solid Na₃PO₄ is added to a solution containing 0.0470 M Ca²⁺ and 0.0930 M Ag⁺ is Ca₃(PO₄)₂.
When Na₃PO₄ is added to the solution, it will react with the Ca²⁺ and Ag⁺ ions to form insoluble salts. The balanced chemical equation for the reaction between Na₃PO₄ and Ca²⁺ is:
3Ca²⁺ + 2PO₄³⁻ + 3Na⁺ → Ca₃(PO₄)₂ + 3Na⁺
The solubility product constant (Ksp) for Ca₃(PO₄)₂ is 1.3 × 10⁻²⁵, which indicates that it is highly insoluble and will precipitate out of solution first. In contrast, the Ksp for Ag₃PO₄ is 2.8 × 10⁻²⁵, which is also very low, but slightly higher than that of Ca₃(PO₄)₂.
However, Ag₃PO₄ is less likely to precipitate out of solution first because it forms a gelatinous precipitate that can be difficult to filter. Therefore, Ca₃(PO₄)₂ is the species that would precipitate out of solution first.
learn more about Solubility product constant here:
https://brainly.com/question/1419865
#SPJ11
Which is more efficient, a butane lighter or an electric lighter (such as the ones traditionally found on the dashboard of automobiles)
In terms of energy efficiency, an electric lighter is more efficient than a butane lighter. However, as such the choice between a butane lighter and an electric lighter ultimately depends on the specific needs and circumstances of the user.
This is because an electric lighter does not require any fuel to operate, and instead uses electrical energy from a battery or the car's electrical system to generate a spark to light a fire.
On the other hand, a butane lighter requires fuel in the form of butane gas to operate, and some of the energy from the combustion of the butane is lost as heat and not used to produce a flame.
Additionally, butane lighters can release small amounts of unburned fuel into the air, contributing to air pollution.
However, it's worth noting that electric lighters may not be as practical for certain situations, such as camping or other outdoor activities where access to electrical power is limited. In such cases, a butane lighter may be a more suitable option.
To know more about energy efficiency refer here:
https://brainly.com/question/28939461#
#SPJ11
A solution of CaCl2 in water forms a mixture that is 32.5% calcium chloride by mass. If the total mass of the mixture is 404.5 g, what masses of CaCl2 and water were used?
The masses of CaCl_2 and water used were 132.18 g and 361.52 g, respectively.
To solve this problem, we need to first understand that the percentage of calcium chloride in the mixture refers to the mass ratio of calcium chloride to the total mass of the mixture. So, we can set up an equation using this information.
Let x be the mass of CaCl2 used and y be the mass of water used. Then, we have:
- The mass of CaCl2 in the mixture is 0.325x (since the mixture is 32.5% CaCl2 by mass).
- The mass of water in the mixture is y.
- The total mass of the mixture is x + y, which we know is 404.5 g.
Putting these together, we get the equation:
0.325x + y = 404.5
Now, we have one equation with two variables, so we need another equation to solve for x and y. Fortunately, we can use the fact that CaCl2 is a compound with a fixed ratio of elements (one calcium atom for every two chloride ions) to set up another equation.
The molar mass of CaCl2 is 110.98 g/mol, which means that 1 mol of CaCl2 contains 1 mol of calcium and 2 mol of chloride. Since the percentage of CaCl2 in the mixture is 32.5%, we know that the mass ratio of calcium to chloride in the mixture is 1:2 (by mass). Therefore, the mass of calcium in the mixture is 0.325x/3 (since calcium makes up one-third of the total mass of CaCl2) and the mass of chloride in the mixture is 0.325x/3 * 2 (since there are two chloride ions for every calcium ion).
Using the molar mass of calcium (40.08 g/mol) and chloride (35.45 g/mol), we can set up another equation:
(0.325x/3) * 40.08 + (0.325x/3 * 2) * 35.45 = 0.325x
Simplifying this equation, we get:
0.325x/3 * (40.08 + 2 * 35.45) = 0.325x
Solving for x, we get:
x = 132.18 g
Now that we know x, we can use the first equation to solve for y:
0.325(132.18) + y = 404.5
y = 404.5 - 42.98 = 361.52 g
For more such questions on calcium chloride
https://brainly.com/question/9322037
#SPJ11
If only 44 grams of COz are produced, what is the % yield? -
Answer:
To calculate the percent yield, you need to know the theoretical yield, which is the maximum amount of product that could be produced based on the starting materials and reaction conditions, and the actual yield, which is the amount of product that was actually obtained in the experiment. The percent yield is then calculated using the following formula:
Percent Yield = (Actual Yield ÷ Theoretical Yield) x 100%
In this case, we don't have information about the theoretical yield or the reaction conditions, but we know that only 44 grams of CO2 were produced. Without additional information, we cannot calculate the percent yield. The theoretical yield could be more or less than 44 grams, and the actual yield could also be more or less than the theoretical yield.
Therefore, we need more information to determine the percent yield.
The amount of a given gas dissolved in the blood ________. is described primarily by Boyle's law is directly proportional to the partial pressure of the gas increases at higher altitudes All of the choices are correct
The amount of a given gas dissolved in the blood increases at higher altitudes.option (b)
This means that as the partial pressure of a gas in contact with the blood increases, the amount of that gas dissolved in the blood will also increase. However, this relationship is not described primarily by Boyle's law, which relates the pressure and volume of a gas at constant temperature.
At higher altitudes, the atmospheric pressure decreases, which in turn decreases the partial pressure of all gases. As a result, the amount of gas dissolved in the blood will also decrease at higher altitudes. This can lead to altitude sickness or hypoxia if the body does not acclimatize to the lower oxygen levels.
Learn more about gas dissolved
https://brainly.com/question/1350827
#SPJ4
Full Question: The amount of a given gas dissolved in the blood:
a) is directly proportional to the solubility of the gas.
b) increases at higher altitudes.
c) is decreased primarily by Boyle's law.
d) is described by all of the above.
A barge is loaded with concentrated H2SO4 and injected 100 liters of the acid to the lake. Assume the acid was mixed evenly over the depth. What is the maximum concentration of H2SO4 that can be found in the lake one day later, if Dx is 0.2 m2/s and Dy is 0.1 m2/s
The maximum concentration of H2SO4 that can be found in the lake one day later is 0.192 times the initial concentration, assuming that the acid is evenly mixed over the depth and not removed from the lake over time.
To determine the maximum concentration of H2SO4 in the lake one day later, we can use the two-dimensional diffusion equation:
∂C/∂t = D∇^2C
where C is the concentration of H2SO4, t is time, and D is the diffusion coefficient.
Assuming that the acid is mixed evenly over the depth, we can use two-dimensional diffusion in the x and y directions. Thus, we can write:
∂C/∂t = Dx (∂^2C/∂x^2) + Dy (∂^2C/∂y^2)
We also know that the initial concentration of the acid is 100 L/total volume of the lake. Therefore, we can use the boundary condition:
C(x,y,0) = 100/(depth x surface area)
Assuming that the acid is not removed from the lake over time, we can use the boundary condition:
C(x,y,t) → 0 as (x,y) → ∞
Solving this diffusion equation using separation of variables and Fourier series, we can find that the maximum concentration of H2SO4 in the lake one day later is:
C_max = 100/(depth x surface area) x [4/π ∑_(n=1)^∞ (1/n) exp(-(nπ)^2Dt/depth^2)]
Plugging in the given values of Dx, Dy, and 1 day (t = 86400 s), we get:
C_max = 100/(depth x surface area) x 0.192
To learn more about equation visit;
brainly.com/question/10413253
#SPJ11
A series of lines involving a common level in the spectrum of atomic hydrogen lies at 656.46nm, 486.27nm, 434.17nm, and 410.29 nm. what is the next line in the series
The next line in the series is at 397.01 nm.
The given wavelengths correspond to the visible emission lines of hydrogen, which are produced when an electron drops from a higher energy level to the n=2 energy level (also called the Balmer series).
The formula to calculate the wavelengths of the Balmer series is:
1/λ = R(1/2² - 1/n²)
where λ is the wavelength, R is the Rydberg constant (1.097 × 10⁷ m⁻¹), and n is the quantum number of the energy level that the electron drops from.
We can use this formula to find the next wavelength in the series. First, we need to determine the quantum number of the energy level that produces this line.
To do this, we can use the given wavelengths to find the differences between successive lines:
656.46 nm - 486.27 nm = 170.19 nm
486.27 nm - 434.17 nm = 52.10 nm
434.17 nm - 410.29 nm = 23.88 nm
We can see that the differences are getting smaller, which means that the wavelengths are getting closer together as we move to higher energy levels.
Therefore, we can estimate the next difference to be around 20 nm.
Next, we can set up an equation to solve for n:
1/λ = R(1/2² - 1/n²)
1/λ' = R(1/2² - 1/(n+1)²)
where λ' is the next wavelength in the series.
We can rearrange these equations and subtract them to eliminate R:
1/λ - 1/λ' = 1/n² - 1/(n+1)²
Using an estimate of 20 nm for λ - λ', we can solve for n:
1/656.46 nm - 1/676.46 nm = 1/n² - 1/(n+1)²
n ≈ 4
Therefore, the next line in the series corresponds to the transition from the n=5 energy level to the n=2 energy level. Plugging n=5 into the formula for the Balmer series, we can calculate the wavelength:
1/λ = R(1/2² - 1/5²)
λ = 1/(R(1/2² - 1/5²))
λ ≈ 397.01 nm
To know more about wavelengths, refer here:
https://brainly.com/question/12924624#
#SPJ11
Suppose that there were two isotopes of Sodium. 28% of the naturally occuring sodium atoms had a mass of 22 amu, and 72% atoms had a mass of 23 amu. What would be the average atomic mass of Sodium?
The average atomic mass of sodium with two isotopes, considering their respective masses and abundances, is 22.72 amu. Isotope 1 has a mass of 22 amu and an abundance of 28%, while isotope 2 has a mass of 23 amu and an abundance of 72%.
To calculate the average atomic mass of sodium with two isotopes, you'll need to take into account the percentage and mass of each isotope. Here's the formula:
Average atomic mass = (Isotope 1 mass × Isotope 1 abundance) + (Isotope 2 mass × Isotope 2 abundance)
In this case:
Isotope 1: mass = 22 amu, abundance = 28% (or 0.28)
Isotope 2: mass = 23 amu, abundance = 72% (or 0.72)
Average atomic mass = (22 × 0.28) + (23 × 0.72) = 6.16 + 16.56 = 22.72 amu
So, the average atomic mass of sodium in this scenario would be 22.72 amu.
Learn more about sodium: https://brainly.com/question/29327783
#SPJ11
You have determined a percent yield greater than 100% and your iron(III) chloride test gave a pale yellow color. What is a likely cause for the yield being so high
If the iron(III) chloride test gave a pale yellow color, it suggests the presence of a small amount of a compound that contains iron, but not necessarily the desired product.
As for the pale yellow color observed in the iron(III) chloride test, it could be due to the presence of impurities or incomplete reaction. Iron(III) chloride is typically used as a test for the presence of phenols, which produce a purple or violet color when reacted with iron(III) chloride. A pale yellow color suggests that the reaction may not have gone to completion or that the sample may have contained impurities that interfered with the reaction.
What is compound?
A compound is a substance made up of two or more different elements that are chemically bonded together in a fixed ratio.
To know more about the compound visit:
brainly.com/question/13516179
#SPJ11
A current of 4.29 A4.29 A is passed through a Fe(NO3)2Fe(NO3)2 solution. How long, in hours, would this current have to be applied to plate out 5.30 g5.30 g of iron
To calculate the time required to plate out 5.30 g of iron from a Fe(NO3)2 solution with a current of 4.29 A, we need to use the formula:
mass of substance = current x time x atomic mass / (number of electrons x Faraday's constant)
Here, the atomic mass of iron is 55.85 g/mol, the number of electrons transferred per ion of Fe(NO3)2 is 2, and Faraday's constant is 96,485 C/mol.
Substituting the given values, we get:
5.30 g = 4.29 A x time x 55.85 g/mol / (2 x 96485 C/mol)
Solving for time, we get:
time = 5.30 g x 2 x 96485 C/mol / (4.29 A x 55.85 g/mol) = 4.90 hours
Therefore, the current of 4.29 A would have to be applied for 4.90 hours to plate out 5.30 g of iron from the Fe(NO3)2 solution.
To find the time required to plate out 5.30 g of iron using a current of 4.29 A, we need to use Faraday's Law of Electrolysis. First, let's determine the relevant information:
1. Current (I) = 4.29 A
2. Mass of iron to be plated (m) = 5.30 g
3. Molar mass of iron (M) = 55.85 g/mol
4. Number of electrons transferred per atom of iron (n) = 2 (since Fe²⁺ → Fe + 2e⁻)
5. Faraday's constant (F) = 96485 C/mol
Now, we can calculate the number of moles of iron to be plated:
moles of iron = m / M = 5.30 g / 55.85 g/mol ≈ 0.0949 mol
Next, we can find the total charge required to plate the iron:
Charge (Q) = moles of iron × n × F = 0.0949 mol × 2 × 96485 C/mol ≈ 18310 C
Finally, we can calculate the time (t) in seconds, using the formula Q = I × t, and then convert it to hours:
t = Q / I = 18310 C / 4.29 A ≈ 4267 s
Now, converting seconds to hours:
t (hours) = 4267 s / 3600 s/h ≈ 1.19 h
So, it would take approximately 1.19 hours to plate out 5.30 g of iron using a current of 4.29 A.
To learn more about Faraday's Law of Electrolysis Click this!
brainly.in/question/14483155
#SPJ11
A galvanic cell uses a platinum electrode as the anode. Does the mass of the electrode increase, decrease, or remain the same as the reaction proceeds
The mass of the platinum electrode remains the same as the reaction proceeds in a galvanic cell.
In a galvanic cell, the anode undergoes oxidation and loses electrons, while the cathode undergoes reduction and gains electrons. The oxidation reaction occurs at the anode, and as a result, metal atoms from the electrode dissolve into the electrolyte solution as positively charged ions.
However, in the case of a platinum electrode, which is an inert metal, it does not undergo any chemical reaction during the process. Therefore, the mass of the platinum electrode remains unchanged as the reaction proceeds. This is because platinum is an inert metal that is not susceptible to oxidation or reduction under the conditions of the galvanic cell.
In other words, platinum acts as a catalyst for the reaction, facilitating the electron transfer between the two electrodes without being consumed in the process. Hence, the mass of the platinum electrode remains constant throughout the reaction.
To know more about galvanic cell refer here:
https://brainly.com/question/30268944#
#SPJ11
Write the balanced half-reaction equation for when H2O2(aq)H2O2(aq) acts as an oxidizing agent in an acidic solution. Phases are optional.
The balanced half-reaction equation for when H2O2(aq) acts as an oxidizing agent in an acidic solution is:
H2O2(aq) + 2H+(aq) + 2e- -> 2H2O(l)
In this reaction, H2O2(aq) is the oxidizing agent and it undergoes reduction by gaining 2 electrons. The presence of H+ ions in the acidic solution provides the necessary protons for the reduction to occur. The resulting products are 2 molecules of water (H2O). An oxidizing agent is a substance that facilitates oxidation, a chemical reaction in which electrons are lost. It accepts electrons from another substance, which is thereby oxidized. The oxidizing agent itself is reduced, meaning it gains electrons. Common oxidizing agents include oxygen, hydrogen peroxide, halogens, and metal ions such as permanganate and dichromate. Oxidation reactions are essential in various industrial processes such as the production of fertilizers, fuels, and chemicals. In biological systems, many enzymes act as oxidizing agents, facilitating metabolic reactions. Oxidizing agents can also be harmful to living organisms, causing damage to cells and tissues, and are often involved in oxidative stress and aging.
Learn more about oxidizing agent here:
https://brainly.com/question/2743949
#SPJ11
What percent of the first anion that precipitates will be left in solution when the second compound starts to precipitate
the percent of the first anion left in solution when the second compound starts to precipitate depends on the solubility product constants and concentrations of both compounds, as well as the common ion effect and Le Chatelier's principle.
To determine the percent of the first anion left in solution when the second compound starts to precipitate, you need to consider the solubility product constants (Ksp) of both compounds and their respective concentrations. The solubility product constant represents the equilibrium between a solid and its constituent ions in a solution. When the ion product (concentration of cations multiplied by the concentration of anions) exceeds the Ksp, precipitation occurs.
Initially, as you add the precipitating agent, only the first compound will precipitate because its Ksp is lower than that of the second compound. When the ion product of the second compound reaches its Ksp, it will also start to precipitate. At this point, some of the first anion will still be present in the solution.
To calculate the percent of the first anion remaining, you can use the common ion effect and Le Chatelier's principle, taking into account the decrease in concentration of the first anion as the second compound begins to precipitate. You can then divide the concentration of the first anion left in the solution by its initial concentration and multiply by 100 to obtain the percentage.
Learn more about Le Chatelier's principle here:
https://brainly.com/question/29195371
#SPJ11
imultaneous determination of the composition of a mixture of two species is possible with spectroscopy due to it's __________.
Simultaneous determination of the composition of a mixture of two species is possible with spectroscopy due to its ability to measure the absorption or emission spectra of the mixture.
When a sample is exposed to light, some wavelengths are absorbed while others are transmitted or scattered. By measuring the amount of light absorbed at different wavelengths, the composition of the mixture can be determined. This is possible because each species in the mixture has a unique spectral signature, which is determined by its chemical structure and physical properties.
For example, if a mixture contains two species that absorb light at different wavelengths, spectroscopy can be used to measure the absorption spectra of both species simultaneously. The amount of light absorbed by each species is proportional to its concentration in the mixture, allowing the composition of the mixture to be determined.
To know more about spectroscopy visit:-
https://brainly.com/question/28523860
#SPJ11
You will be given a 100. mg/L quinine stock solution that you will use to prepare five dilutions (or standards). Your target range for your standard concentrations is 10.0 - 50.0 mg/L. You decide that you want to make a 10.0 mg/L standard. In order to produce a solution with a final volume of 10.0 mL, what volume of the 100. mg/L quinine stock solution will you need to use
Thus we need to use 1.0 mL of the 100. mg/L quinine stock solution to prepare a 10.0 mg/L standard quinine solution with a final volume of 10.0 mL.
How to determine the volume of a desired concentration of the solution?To prepare a 10.0 mg/L standard quinine solution with a final volume of 10.0 mL from a 100. mg/L quinine stock solution, you will need to use the following steps:
1. Identify the desired concentration: In this case, you want a 10.0 mg/L quinine solution.
2. Identify the final volume required: You want a 10.0 mL solution.
3. Determine the concentration of the stock solution: The given stock solution has a concentration of 100. mg/L.
Now, use the dilution formula C1*V1 = C2*V2, where C1 is the initial concentration, V1 is the volume of the stock solution to be used, C2 is the desired concentration, and V2 is the final volume.
Plugging in the values:
(100 mg/L) * V1 = (10.0 mg/L) * (10.0 mL)
To find V1, divide both sides by 100 mg/L:
V1 = (10.0 mg/L) * (10.0 mL) / (100 mg/L)
V1 = 1.0 mL
To know more about Volume:
https://brainly.com/question/25307719
#SPJ11
How does the wavelength of an X-ray produced from a K-alpha transition in molybdenum compare to that produced from a lower energy K-alpha transition in copper
The wavelength of an X-ray produced from a K-alpha transition in molybdenum is shorter than that produced from a lower energy K-alpha transition in copper. This is due to the fact that the energy difference between the K-shell and L-shell in molybdenum is greater than that in copper.
In a K-alpha transition, an electron from the L-shell fills the vacancy in the K-shell, releasing energy in the form of an X-ray. The energy of the X-ray is determined by the energy difference between the K and L shells. Molybdenum has a higher atomic number than copper, which means that it has more electrons and a larger nucleus.
This results in a stronger attraction between the electrons and the nucleus in molybdenum, leading to a larger energy difference between the K and L shells compared to copper. As a result, the X-ray produced from a K-alpha transition in molybdenum has a shorter wavelength and higher energy than that produced from a lower energy K-alpha transition in copper.
This has practical implications in X-ray spectroscopy, where molybdenum is often used as an X-ray source for its strong K-alpha emission line, which can be used to identify and analyze the chemical composition of materials.
Know more about X-ray here:
https://brainly.com/question/24505239
#SPJ11
When FeCl3 is ignited in an atmosphere of pure oxygen, this reaction takes place. 4 FeCl3(s) 3 O2(g) --> 2 Fe2O3(s) 6 Cl2(g) If 3.00 mol of FeCl3 are ignited in the presence of 2.00 mol of O2 gas, how much of which reagent is present in excess and therefore remains unreacted
In this reaction, FeCl3 and O2 react in a 4:3 mole ratio. So, for every 4 moles of FeCl3, we need 3 moles of O2.
First, we need to determine which reactant is limiting and which is in excess. To do this, we can use the mole ratio of FeCl3 to O2 in the balanced equation.
For every 4 moles of FeCl3, we need 3 moles of O2. So, if we have 3.00 mol of FeCl3 and 2.00 mol of O2, we can see that there is not enough O2 to completely react with all of the FeCl3.
To find out which reactant is limiting, we can calculate the amount of FeCl3 that would react with 2.00 mol of O2:
(2.00 mol O2) / (3 mol O2/4 mol FeCl3) = 1.33 mol FeCl3
Since we only have 3.00 mol of FeCl3, which is more than the 1.33 mol required to react with 2.00 mol of O2, FeCl3 is in excess and O2 is limiting.
Now, we can calculate the amount of excess reagent (FeCl3) remaining after the reaction is complete:
3.00 mol FeCl3 - 1.33 mol FeCl3 = 1.67 mol FeCl3
Therefore, 1.67 mol of FeCl3 is present in excess and remains unreacted.
learn more about reagent
https://brainly.com/question/26905271
#SPJ11
An aqueous solution of PdCl2 is electrolyzed for 33.5 seconds and during this time 0.1064 g of Pd is deposited on the cathode. Calculate the average current used in the electrolysis. The Faraday constant is 96,485 C/mol e-.
The average current used in the electrolysis of the PdCl2 solution is approximately 5.76 amperes.
To calculate the average current used in the electrolysis of an aqueous solution of PdCl2 for 33.5 seconds with 0.1064 g of Pd deposited on the cathode, follow these steps:
1. Determine the moles of Pd deposited.
Divide the mass deposited (0.1064 g) by the molar mass of Pd (106.42 g/mol)
To find the moles of Pd:
0.1064 g / 106.42 g/mol ≈ 0.00100 mol Pd
2. Calculate the moles of electrons involved in the reduction of Pd(II) to Pd(0).
The reduction half-reaction is: Pd2+ + 2e- → Pd
For each mole of Pd deposited, 2 moles of electrons are involved.
So, multiply the moles of Pd by 2:
0.00100 mol Pd × 2 = 0.00200 mol e-
3. Convert moles of electrons to coulombs (charge).
Use the Faraday constant (96,485 C/mol e-) to convert moles of electrons to coulombs:
0.00200 mol e- × 96,485 C/mol e- ≈ 193 C
4. Calculate the average current.
Current (I) is defined as the charge (Q) divided by the time (t).
The charge is 193 C, and the time is 33.5 seconds.
Divide the charge by the time to find the current:
I = Q/t = 193 C / 33.5 s ≈ 5.76 A
To know more about electrolysis refer here:
https://brainly.com/question/24358068#
#SPJ11
How many grams of CO2 are produced by the combustion of 424 g of a mixture that is 37.6% CH4 and 62.4% C3H8 by mass
437.80 g of CO₂ are produced by the combustion of 424 g of a mixture that is 37.6% CH₄ and 62.4% C₃H₈ by mass
To calculate the amount of CO₂ produced by the combustion of the given mixture, we first need to determine the balanced chemical equation for the combustion of methane (CH₄) and propane (C₃H₈):
CH₄ + 2O₂ -> CO₂ + 2H₂O
C₃H₈ + 5O₂ -> 3CO₂ + 4H₂O
Next, we need to calculate the number of moles of CH₄ and C₃H₈ in the given mixture. Assuming a total mass of 424 g, the mass of CH₄ in the mixture is:
0.376 x 424 g = 159.424 g
The number of moles of CH₄ is:
159.424 g / 16.04 g/mol = 9.937 mol
Similarly, the mass of C₃H₈ in the mixture is:
0.624 x 424 g = 264.576 g
The number of moles of C₃H₈ is:
264.576 g / 44.1 g/mol = 6.000 mol
The limiting reactant in the combustion of the mixture will be the one that produces the least amount of CO₂. To determine which reactant is limiting, we need to calculate the number of moles of O₂ required to completely react with each of the reactants:
For CH₄: 1 mol CH₄ x 2 mol O₂/mol CH₄ = 19.874 mol O₂
For C₃H₈: 1 mol C₃H₈ x 5 mol O₂/mol C₃H₈ = 30.000 mol O₂
Since we have 17.951 moles of O₂ available (assuming excess O₂), CH₄ is the limiting reactant.
The number of moles of CO₂ produced by the combustion of 9.937 mol of CH₄ is:
9.937 mol CH₄ x 1 mol CO₂ / 1 mol CH₄ = 9.937 mol CO₂
The mass of CO₂ produced is:
9.937 mol CO₂ x 44.01 g/mol = 437.80 g CO₂
Therefore, the combustion of 424 g of the given mixture will produce 437.80 g of CO₂.
To know more about the combustion refer here :
https://brainly.com/question/15117038#
#SPJ11
During the initial pressure test, the source shutoff valve shall remain closed and the test pressure for pressure gases shall be 1.5 times the system working pressure, but not less than _____________.
During the initial pressure test, the source shutoff valve should remain closed and the test pressure for pressure gases should be 1.5 times the system working pressure, but not less than the minimum specified value.
During the initial pressure test, the source shutoff valve shall remain closed and the test pressure for pressure gases shall be 1.5 times the system working pressure, but not less than the minimum allowable pressure specified by the manufacturer or applicable code requirements.
It is important to follow the specified pressure requirements during testing to ensure the safety and integrity of the system. Any deviations from the specified requirements could lead to dangerous situations, including leaks or ruptures in the system.
Therefore, it is crucial to carefully follow the testing procedures and guidelines provided by the manufacturer or applicable codes.
To know more about initial pressure click on below link :
https://brainly.com/question/23710615#
#SPJ11
Answer:
The test pressure should be 1.5 times the working pressure or the MAWP, whichever is higher.
Explanation:
The MAWP is the maximum pressure at which the system is designed to operate safely.
The minimum pressure required during the initial pressure test for pressure gases can vary depending on the applicable regulations, codes, or standards.
However, a common requirement is that the test pressure shall be 1.5 times the system working pressure, but not less than the maximum allowable working pressure (MAWP) of the system.
Therefore, the test pressure should be 1.5 times the working pressure or the MAWP, whichever is higher.
To know more on MAWP refer,
https://brainly.com/question/19339512#
#spj11
Your neighbor is fertilizing his lawn using a dry chemical fertilizer. As he is placing the fertilizer on the ground, a large gust of wind blows fertilizer all over him. You approach him and he is breathing normally. You would start care by:
A strong gust of wind blasts fertiliser all over him while he is laying the fertiliser on the ground. When you get close to him, his breathing is regular. You would begin your treatment by using a towel or gloved hand to sweep the fertiliser off of him.
Verify the safety of the situation. Body fat, muscles, and skin are examples of soft tissues. Water-rinse the wound. The likelihood of infection will be lower if you keep the wound submerged in flowing water. Soap-wash the area around the wound.
Heat therapy would improve blood flow to the wound site and trigger the inflammatory processes necessary for tissue healing. Heat can also promote mobility by easing muscular stiffness. Is heat beneficial for a shattered bone's healing process. yes.
Learn more about fertiliser visit: brainly.com/question/22283073
#SPJ4
15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm. What is the new volume in liters
The new volume of the gas is 33.3 L. If 15.0 L of an ideal gas at 298 K and 3.36 atm are heated to 383 K with a new pressure of 6.35 atm.
We can use the combined gas law to solve this problem.which relates to the pressure, volume, and temperature of an ideal gas:
(P1 x V1) / T1 = (P2 x V2) / T2
where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas, respectively, and P2, V2, and T2 are the new pressure, volume, and temperature of the gas, respectively.
Substituting the given values, we get:
(3.36 atm x 15.0 L) / 298 K = (6.35 atm x V2) / 383 K
Simplifying and solving for V2, we get:
V2 = (3.36 atm x 15.0 L x 383 K) / (298 K x 6.35 atm)
V2 = 33.3 L
Learn more about combined gas law here:
https://brainly.com/question/30458409
#SPJ11
Which of the following elements will form negative ions? Check
all that apply.
K
S
I
Mg
Answer:
S and I will form a Negative charge
Explanation:
From the Periodic Table, we know that elements having,6,7 valence electrons have the tendency to gain electrons and try to form negative ions.
As per the given question,
K gives up 1 electron to make it a positive charge
And,
Mg gives up 2 electrons to make it a positive charge
And ,
S and I both take electrons making them negatively charged.
Describe how eugenol was extracted from the clove leaf explain how steam distillation works discuss how eugenol was extracted and isolated from the aquous distillate calculate and comment on the % of eugenol recovered from the clove leaf ( what can I say about what I recovered)
Eugenol is a compound found in clove oil that has many medicinal and therapeutic properties. To extract eugenol from clove leaves, steam distillation is commonly used. In this process, water is heated to produce steam which is passed through the clove leaves.
The steam carrying the volatile oil compounds from the leaves is then collected and cooled to form an aqueous distillate.
To isolate eugenol from the aqueous distillate, the distillate is extracted with an organic solvent such as ether. Eugenol is then separated from the ether using a separating funnel. The ether is evaporated to leave behind pure eugenol.
The percentage of eugenol recovered from the clove leaf can be calculated using the formula:
% yield = (mass of eugenol recovered ÷ mass of clove leaves used) x 100
The yield of eugenol obtained depends on various factors such as the quality of the clove leaves, the extraction process, and the efficiency of the separation and purification methods. A higher percentage yield indicates a more efficient extraction and purification process.
In conclusion, eugenol can be extracted from clove leaves using steam distillation. The extracted eugenol can then be isolated and purified using organic solvents. The percentage yield of eugenol recovered from the clove leaves depends on various factors and can be calculated using the mass of eugenol recovered and the mass of clove leaves used.
learn more about compound here
https://brainly.com/question/12166462
#SPJ11
You are titrating an acid into a base to determine the concentration of the base. The endpoint of the neutralization is reached but the stopcock on the buret sticks slightly and allows a few more drops of acid to fall into the solution. How will this affect your calculations for the concentration of the base
Adding more acid after the endpoint of a titration will make the solution too acidic and lower the calculated concentration of the base, resulting in an underestimate of its concentration.
To avoid this error, it is important to stop the titration immediately once the endpoint is reached and not to add any additional drops of titrant. If the stopcock on the buret sticks, it should be fixed or replaced before proceeding with the titration to ensure accurate results.
If additional acid is accidentally added, the titration should be repeated to obtain more accurate results.
It is also important to ensure that the equipment used for the titration is clean and free of any contaminants that may affect the reaction. The buret, pipette, and other equipment should be rinsed thoroughly with the solution being used to ensure accurate results.
Additionally, the endpoint should be carefully determined, which is often indicated by a color change or other physical change in the solution being titrated.
To know more about titration, refer here:
https://brainly.com/question/13307013#
#SPJ11
0.1 mL of an original sample is diluted into 9.9 mL of water, and then 0.1 mL of this is spread on a plate. 54 colonies grew. What was the original cell density of the sample
The original cell density of the sample was 54,000 cells/mL. This means that for every 1 mL of the original sample, there were 54,000 cells. It is important to note that this calculation assumes that each colony arose from a single cell and that the cells were evenly distributed throughout the original sample. If there were clumps or aggregates of cells, this calculation may not be accurate.
To calculate the original cell density of the sample, we need to use the following formula:
Original cell density = (number of colonies / volume plated) * (1 / dilution factor)
Here, the volume plated is 0.1 mL, and the dilution factor is 1:100 (since we diluted 0.1 mL of the original sample into 9.9 mL of water). Therefore, the dilution factor is 1/100 = 0.01.
Substituting these values into the formula, we get:
Original cell density = (54 colonies / 0.1 mL) * (1 / 0.01)
Simplifying this, we get:
Original cell density = 54,000 cells/mL
For more such questions on aggregates
https://brainly.com/question/16380585
#SPJ11
why did a mixture of 2.00 ml of ph 7.00 phosphate buffer, 0.900 ml of DI water and 0.100 ml of 0.0300 M p-nitrophenyl acetate in acetonitrile have an A400 of approximately 0.03 at zero time
The p-nitrophenyl acetate is being hydrolyzed by the water in the buffer solution, which results in an A400 of around 0.03 at zero time for the mixture of 2.00 mL of pH 7.00 phosphate buffer, 0.900 mL of DI water, and 0.100 mL of 0.0300 M p-nitrophenyl acetate in acetonitrile.
As an ester, p-nitrophenyl acetate is known to undergo hydrolysis in the presence of water to produce an alcohol and a carboxylic acid.
The buffer in this instance aids in keeping the pH of the solution constant at 7.00 by catalysing the hydrolysis of p-nitrophenyl acetate in the buffer solution. P-nitrophenol, which absorbs light with a wavelength of 400 nm, is created by the hydrolysis of p-nitrophenyl acetate.
Learn more about p-nitrophenyl visit: brainly.com/question/24052253
#SPJ4
When 72.476 g of a substance with a molecular weight of 183.031 g/mol is combusted, 383.35 kJ of heat is produced. What would the enthalpy change per mole (kJ/mol) of the substance under these conditions
The enthalpy change per mole of the substance is approximately 967.8 kJ/mol.
To calculate the enthalpy change per mole of the substance, we need to use the given information: mass of the substance, molecular weight, and heat produced. Here are the steps:
1. Determine the number of moles of the substance combusted:
Number of moles =\frac{ mass }{molecular weight}
Number of moles = \frac{72.476 g }{183.031 g/mol}
Number of moles ≈ 0.396 mol
2. Calculate the enthalpy change per mole:
Enthalpy change per mole = \frac{heat produced }{ number of moles}
Enthalpy change per mole =\frac{ 383.35 kJ }{ 0.396 mol}
Enthalpy change per mole ≈ 967.8 kJ/mol
learn more about enthalpy Refer: https://brainly.com/question/16720480
#SPJ11
2. Provide an example (name and structure) of a molecule found in the human body that contains an aromatic heterocycle. What is the name of that heterocycle
The molecule serotonin, which is found in the human body, contains an aromatic heterocycle called an indole.
What is indole ?Indole is an aromatic organic compound found in many plants and animals. It is an aromatic hydrocarbon that has a ring structure of five carbon atoms with a nitrogen atom at the center. It is also found in some bacteria and is produced when tryptophan is metabolized. Indole has a variety of uses in industry, from being used as a fuel to being used as a flavoring agent. In medicine, indole is used as a precursor for some drugs, such as the antibiotic ciprofloxacin. It is also used to produce aromatic organic compounds, such as indigo and indole-3-acetic acid. Indole also plays a role in the regulation of gene expression by acting as a signal molecule, which can affect the development and behavior of cells.
Serotonin has the chemical structure C₁₇H₂₁N₃O₁. It is a monoamine neurotransmitter that is synthesized in the central nervous system and the gastrointestinal tract. It plays a role in regulating mood, sleep, appetite, and other processes.
To learn more about indole
https://brainly.com/question/30542358
#SPJ4