A veel of 356cm cubic contain oxygen at a preure of 760mmHg and a temperature of 15 degree Celiu. Auming the volume i contant calculate the temperature to which it mut be raied to give a 2atm
The temperature would have to be raised to approximately 8.64 * n Kelvin.
The temperature to which the volume of oxygen must be raised to give a 2atm pressure can be calculated using the Ideal Gas Law:
PV = nRT
where:
P is the pressure (in atm),
V is the volume (in liters),
n is the number of moles of gas,
R is the gas constant (0.0821 Latm/molK),
T is the temperature (in Kelvin).
Given the initial pressure of 760 mmHg, we can convert it to atmospheres:
760 mmHg * 1 atm / 760 mmHg = 1 atm
And given the initial temperature of 15 degrees Celsius, we can convert it to Kelvin:
15°C + 273.15 = 288.15 K
Rearranging the Ideal Gas Law equation for T and solving for the temperature at 2atm:
T = (PV / nR)
T = (2 atm * 356 cm³) / (n * 0.0821 L * atm / mol * K)
T = (2 atm * 356 cm³ * 1 L / 1000 cm³) / (n * 0.0821 L * atm / mol * K)
T = (2 atm * 0.356 L) / (n * 0.0821 L * atm / mol * K)
T = (0.712 L * atm) / (n * 0.0821 L * atm / mol * K)
T = 8.64 * n K
You can learn more about temperature at
https://brainly.com/question/24746268
#SPJ4
What pairs make a good buffer?
A good buffer can be either a weak acid plus a salt which is derived from that weak acid, or a weak base plus a salt which is derived from that weak base.
A buffer can be defined as the solution of reserve acidity or we can say alkalinity which resists change of pH on the addition of even a small amount of acid or alkali.
Buffers are necessary as a number of chemical reactions are required to be carried out at a constant pH. In nature, there are a lot of systems which require buffering for pH regulation. A good buffer can be either a weak acid plus a salt which is derived from that weak acid, or a weak base plus a salt which is derived from that weak base.
To know more about buffer here
https://brainly.com/question/16556401
#SPJ4
Which will be the best leaving group for a nucleophilic reaction?
Alkyl bromides, alkyl iodides, and alkyl chlorides are all typical reactants in laboratory nucleophilic substitution processes. The best leaving group among the four common halides (F, Cl, Br, and I) is iodide, which is the least basic of them all.
Do Sn1 or Sn2 require an excellent leaving group?
Sn1 and Sn2: Since both sn1 and sn2 reactions need strong leaving groups, the type of leaving group has no effect on the reaction. A extremely weak leaving group, however, might stop either reaction from happening at all.
What is nucleophilic substitution with leaving group ability?
When an electrophile that is positively charged attacks a nucleophile that is rich in electrons, the leaving group from the nucleophile is replaced.
To know more about chlorides visit:
brainly.com/question/15296925
#SPJ4
What is Copper Sulfate?
The description of the copper sulphate is mentioned below.
What is Copper Sulfate?
Copper sulfate can seriously irritate the eyes. It is also used as an antibacterial and molluscicide. Consuming excessive amounts of copper sulfate can cause nausea, vomiting, and harm to the liver, kidneys, blood cells, and other body parts. Shock and even death might result from excessive exposures.
What is minerals?
A naturally occurring inorganic substance or element with an. crystal form, physical properties, and characteristic chemical composition with an ordered internal structure. Rocks are naturally occurring solids made up of one or more minerals, whereas minerals are different.
Therefore, description of the copper sulphate is mentioned above.
Learn more about copper sulphate from the given link.
https://brainly.com/question/17439051
#SPJ4
What is the pH value of vinegar?
Vinegar is mildly acidic with a pH of 2–3.
What is pH ?
It is defined as the negative logarithm of the concentration of hydrogen ions (H+) in solution. Acidic vinegar is used. Depending on the type of vinegar, each has a different pH level. The best type of white distilled vinegar for household cleaning typically has a pH of around 2.5.
The French word for vinegar is "sour wine," and it can be made from anything that contains sugar, like fruit.
Yeast and bacteria use a two-step fermentation process to convert sugar into ethanol (also known as ethyl alcohol), which is then converted into acetic acid. Vinegar's acidity is caused by the presence of acetic acid. pH strips make it simple to check the vinegar's pH. pH strips are easily accessible and inexpensive to use. They come with a color chart that you can use to see how their color changes in response to the pH level of a liquid.
The pH scale runs from 0 to 14, with 7 being neutral,
To know more about pH , click the link below ;
https://brainly.com/question/26424076
#SPJ4
The pH value of vinegar is 2-3. Vinegar is a dilute solution of acetic acid, which is a weak acid with a pH of 2-3.
What do you mean by pH?
pH stands for "potential of hydrogen" and is a measure of how acidic or basic a substance is. It is measured on a scale from 0 to 14, with 0 being the most acidic and 14 being the most basic. A pH of 7 is considered neutral, meaning it has neither acidic nor basic properties.
The pH value of vinegar is determined by the amount of acetic acid it contains. Acetic acid is a weak acid, meaning that it does not ionize completely in water. This causes its pH to be lower than 7, which is the neutral pH. The more acetic acid in the vinegar, the lower the pH will be. Acetic acid has a pH of 2-3, so vinegar with a high concentration of acetic acid will also have a pH of 2-3.
To know more about pH, click the link below ;
brainly.com/question/26424076
#SPJ4
convert the following to basic si units: 5.7×104 m^2 to si
The specified unit, 5.7 x 104 m2, is already in SI units (International System of Units). The SI unit for area is square meters (m2), which is used in the conversion. As a result.
no additional conversion is required. 5.7 x 104 m2 is the answer. The International System of Units, or SI, is the standard unit system used in science and engineering. SI's purpose is to offer a consistent and coherent unit system that can be used to perform accurate measurements and comparisons across disciplines and nations. SI's fundamental units are the meter, kilogram, second, mole, ampere, kelvin, and candela. Scientists and engineers can properly measure and compare physical quantities such as length, mass, time, temperature, and others by utilizing these fundamental units and their derivatives. When working in these sectors, it is critical to be conversant with the SI system and its units.
learn more about SI unit here:
https://brainly.com/question/12750330
#SPJ4
Which of these atoms are often hydrogen-bond acceptors? a. carbon b. oxygen c. hydrogen d. B and C e. none of these f. all of these 2.
Hydrogen bonding is a type of chemical bond that occurs between two atoms, one of which is hydrogen. This type of bond is important in many biological and chemical systems and plays a role in determining the properties of many substances.
Of the atoms listed, oxygen and nitrogen are often hydrogen-bond acceptors. These atoms have a high electronegativity, meaning they have a strong attraction for electrons. This makes them highly polarizable, and they can form hydrogen bonds with other highly polarizable atoms, such as hydrogen.
Carbon is not typically a hydrogen-bond acceptor. Carbon has a lower electronegativity compared to oxygen and nitrogen, and is not as polarizable. This means that it does not have the same ability to form hydrogen bonds with other atoms.
Hydrogen can be a hydrogen-bond donor, but not a hydrogen-bond acceptor. This is because hydrogen has a very high electron affinity, meaning it is highly attracted to electrons. However, it has a small size and low mass, which makes it a poor acceptor of hydrogen bonds.
In conclusion, of the atoms listed, oxygen and nitrogen are often hydrogen-bond acceptors, while carbon and hydrogen are not. Oxygen and nitrogen have high electronegativities, making them highly polarizable and capable of forming hydrogen bonds. Carbon has a lower electronegativity and is not as polarizable, while hydrogen is a small, lightweight atom that is a poor acceptor of hydrogen bonds.
For more about hydrogen-bond:
https://brainly.com/question/17659933
#SPJ11
Common bra i a copper and zinc alloy containing 37. 0% zinc by ma and having a denity of 8. 48 g/cm3. A fitting compoed of common bra ha a total volume of 129. 5 cm3. How many atom of copper doe the fitting contain?
The number of atom of copper is 6.197 x10²⁴ .
We must first determine the overall mass of the brass.
Equation used:
Density = mass/ volume
8.48 g/cm³ = Mass/ 129. 5 cm³
Mass = 8.48 g/cm³ x 129. 5 cm³
Total Mass of brass = 1038.8 g
The mass of copper must now be calculated.
According to the information provided, 37 g of zinc are present in 100 g of combination, or 37% zinc by mass.
Mass of zinc = 37 g
Total mass of mixture (brass) = 100 g
Mass of copper = 100 - 37 = 63 g
Mass of cooper in the brass = 63/ 100 x 1038.8 g =654.44 g
Now we have mass of cooper we can calculate the moles of copper
Moles of cooper = mass/ mass molar
Moles of cooper = 654.44 g / 63.55 g/moles = 10.29 moles.
We now need to determine how many atoms there are in copper.
Since there are 6.02 x 10²² atoms of copper in 1 mole of copper.
the total moles of cooper = 10.29 moles x 6.02 x 10²² atoms = 6.197 x10²⁴
Therefore, there are a total of 6.197 x10²⁴ atom of copper in there.
Learn more about number of atom at https://brainly.com/question/29769911
#SPJ4
what property of an element determines how it reacts with other elements?
The chemical properties of an element, specifically its electron configuration and valence electrons, determine how it reacts with other elements and forms chemical bonds.
The chemical properties of an element that determine its reactivity and ability to form chemical bonds include:
Electron configuration: The arrangement of electrons in an element's atoms determines its chemical behavior. Elements with similar electron configurations tend to react in similar ways.Valence electrons: The electrons in the outermost energy level of an atom, known as the valence electrons, are involved in chemical reactions and bonding. The number of valence electrons an element has can influence the types of bonds it forms and its reactivity.Ionization energy: The energy required to remove an electron from an atom is called its ionization energy. Elements with low ionization energies are more likely to give up electrons and form positive ions, making them more reactive.Electronegativity: The electronegativity of an element measures its ability to attract electrons. Elements with high electronegativities tend to be more reactive because they can pull electrons away from other atoms and form chemical bonds.Learn more about the chemical properties of an element:
https://brainly.com/question/23801332
#SPJ4
(PLS HELP ASAP!!!) Soda lime absorbs carbon dioxide, A plant in a container with a dish of soda lime begins to turn yellow and dies, even if it gets lots of light, water and minerals.
Question: What does this tell you about photosynthesis?
If soda lime absorbs carbon dioxide, and a plant in a container with a dish of soda lime begins to turn yellow and dies, even if it gets lots of light, water and minerals, then it indicates photosynthesis that this process depends on the carbon dioxide saturation.
What is the process of photosynthesis?The process of photosynthesis is a metabolic pathway in plants and algae that generates glucose in presence of oxygen and sunlight, which generates carbon dioxide as byproduct.
Therefore, with this data, we can see that the process of photosynthesis can be inhibited by high carbon dioxide.
Learn more about the process of photosynthesis here:
https://brainly.com/question/19160081
#SPJ1
how to calculate ka of nh4 from kb of nh3
The calculation of the ka of NH₄⁺ from the kb of the NH₃ is from the relation ka kb = kw
The relation of the ka , kb and the kw is as follows :
ka kb = kw
ka = kw / kb
Where,
kw = 1 × 10¹⁴
The derivation is as follows :
NH₄⁺(aq) + H₂O(l) ---> NH₃(aq) + H₃O⁺(aq)
ka = [NH₃] [ H₃O⁺] / NH₄⁺
kb = [NH₄⁺] [OH⁻]/ [NH₃]
kb = [ H₃O⁺] [OH⁻] / ka
Where,
[ H₃O⁺] [OH⁻] = kw
ka kb = kw
Thus, the ka can be calculate from kb by ka kb = kw.
To learn more about ka here
https://brainly.com/question/15400042
#SPJ4
is it possible to have three simultaneous processes in execution? please give one example to support your answer.
Yes, it is possible to have three simultaneous processes in execution.
In computing, a process is an instance of a computer program that is being executed by one or many threads. Every process has its own memory space, and it runs independently of other processes. The operating system schedules different processes to run at the same time, and this is known as multitasking.
For example, a person might have multiple programs running on their computer, such as a web browser, a text editor, and a media player. All three of these programs are separate processes that are executing simultaneously.
The operating system divides the processing time among these processes so that each one has a chance to run, and the user can interact with all of them at the same time. This is what allows a user to switch between multiple tasks seamlessly, and it gives the illusion of three processes running at the same time.
To learn more about processes, visit:
https://brainly.com/question/29487063#
#SPJ11
Determine the number of moles of kf contained in 244 ml of 0. 135 mol kg-1 kf solution? the density of the solution is 1. 22 g ml-1.
The number of moles of kf contained in 244 ml of 0. 135 [tex]\frac{mol}{kg}[/tex] is 0.040 mole.
A mole is a popular scientific measurement unit for large quantities of very small items like atoms, molecules, or other specified particles in chemistry. It can also be spelt mol. A mole has the same number of atoms or other particles in every substance. The mole concept is a helpful technique to quantify the amount of a substance. Any measurement can be broken down into two parts: the numerical magnitude and the units in One of the most frequent chemistry calculations is converting moles into grams of a substance. The mole ratio of the reactants to the reagents will be used by you when balancing equations in which the magnitude is given.
density=[tex]\frac{mass}{volume}[/tex]
1.22=[tex]\frac{mass}{244}[/tex]
Mass=297.86
Convert to kg by dividing by 1000
Mass=0.29768 Kg
Now, plug this value into molality equation.
Molality=[tex]\frac{mol}{kg}[/tex]
0.35=[tex]\frac{mol}{0.29768}[/tex]
Mole=0.040
Learn more about moles
brainly.com/question/26416088
#SPJ4
A specimen of aluminum having a rectangular cross-section of 10 mm x 12. 7 mm is pulled in tension with 35,500 N of force, producing only elastic deformation. Calculate the resulting strain
The resulting strain from the specimen of aluminum is 3.958 × 10^-3.
How to calculate the resulting strain?It should be noted that the Young modules of aluminum will be:
= 69 × 10^9 Pa
The axial stress is given as:
= 35500 / (0.01)(0.014)
= 2.731 × 10^8 Pa
The strain will now be:
= (2.731 × 10^8 Pa) / (69 × 10^9 Pa)
= 3.958 × 10^-3.
Read more about strain here:
https://brainly.com/question/17046234
#SPJ1
Can someone help me please ill give you 50 points
On erosion of Earth's surfaces, the letter of terms and phrase that complete the sentences are:
B, GravityD, MudflowA, TillsC, RillsD, StreamsErosionRockgravityice watermass movement mudflowslump rock slidesglacierscirquesWhat is a Cirques?Cirques are bowl-shaped, amphitheater-like depressions carved by glaciers into high-elevation mountains and valley sidewalls. As gravity pulls the glaciers downslope, they frequently flow up and over the cirque's lip. Once the glaciers recede, lakes (called tarns) frequently form in these depressions.
Cirques are areas of snow accumulation, so the direction in which they point (their aspect) can reveal information about the past links between climate and glacier growth.
Learn more on cirques here: https://brainly.com/question/30224794
#SPJ1
5. How many moles of cadmium chloride can be produced from 45.1 grams of cadmium with excess hydrochloric acid?
Cd(s) + 2 HCl(aq) → CdCl2(aq) + H2(g)
6. How many moles of sulfur could be prepared from 54.1 L of oxygen at STP?
2 H2S(g) + O2(g) → 2 S(s) + 2 H2O(l)
7. Calculate the number of grams of CO2 that are produced by heating 116.4 grams of magnesium carbonate.
MgCO3(s) → MgO(s) + CO2(g)
8. How many moles of silver will be formed when 5.00 mol of copper react with excess silver nitrate?
Cu(s) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 Ag(s)
9. Phosphorus reacts with oxygen gas to produce tetraphosphorus decoxide.
4 P(s) + 5 O2(g) → P4O10(s)
If a chemist needs 33.1 grams of P4O10, how many moles of P4 are needed to react with excess oxygen?
10. In the reaction, Al2O3(s) + 6 HCl(aq) → 2 AlCl3(aq) + 3 H2O(l), how many grams of AlCl3 will be produced from 56.1 grams of HCl?
As per the balanced chemical equation of the reaction between cadmium and HCl, one mole of Cd produce one mole of cadmium chloride. Then, 45.1 g or 0.4 moles of Cd will produce 0.4 moles of cadmium chloride.
What is theoretical yield of a reaction?The theoretical yield of a reaction is the amount of product obtained based on the balanced chemical equation of the reaction. However, the actual yield might vary from the the theoretical value.
The given reaction of Cd and HCl shows that, one mole of Cd produce one mole of the product cadmium chloride.
Atomic mass of Cd = 112.4 g/mol
given mass = 45.1 g
no.of moles = 45.1 g/ 112.4 g/mol = 0.4 moles.
It is said that, the number of moles of cadmium chloride from 1 mole is 1. Therefore, 0.4 moles of Cd will give 0.4 moles of cadmium chloride. Using the same way, we can determine the yield of products in any reaction.
Find more on theoretical yield :
https://brainly.com/question/11002641
#SPJ1
Ni+3O2 —> 2Ni2O3
how many grams of nickle (iii) oxide is formed if 121.1g of nicklel reacts with 50.7 L of oxygen gas?
The mass in grams of nickel (iii) oxide that is formed if 121.1g of nickel reacts with 50.7 L of oxygen gas is 249.6 g
What mass of nickel (iii) oxide is formed?The mass of nickel (iii) oxide that is formed is determined from the mole ratio of the reaction as given from the equation of the reaction.
Equation of the reaction: Ni +3 O₂ —> 2 Ni₂O₃
The mole ratio of oxygen and nickel (iii) oxide as given by the equation is 3 : 2
The molar mass of nickel (iii) oxide is 165.4 g/mol
The mole of oxygen reaction = 50.7 L/22.4 L/mol
The mass of nickel(iii) oxide produced = 50.7 L/22.4 L/mol * 2/3 * 165.4 g
The mass of nickel(iii) oxide produced = 249.6 grsams
Learn more about mole ratio at: https://brainly.com/question/26023
#SPJ1
calculate the ph of the solution resulting from the addition of 10.0 ml of 0.10 m naoh to 50.0 ml of 0.10 m hcn (ka
When 100 ml of 0.10 m HCN and 0.10 m NaOH are titrated, the pH at the equivalence point is 11.04.
Titration is a common laboratory method for quantitative chemical analysis to determine the concentration of an identified analyte. The reagent, sometimes referred to as the titrant or titrator, is prepared as a standard solution with a specified concentration and volume. Titration is widely used in the food industry as an analytical technique. It enables food manufacturers to gauge the amount of a reactant present in a sample. For example, it can be used to determine a food's salt, sugar, or vitamin C or E concentration, which changes the product's hue. At the equivalent point, 200 mL of solution may hold 10 mmol of cyanide ions.
Learn more about Titration here:
https://brainly.com/question/28562278
#SPJ4
7CH4 + 2O2 → CO2 + 2H2O. The products in this reaction include:
Select one:
a. methane and oxygen.
b. carbon dioxide and water.
c. carbon dioxide and oxygen.
d. methane and water.
In the given equation , 7CH4 + 2O2 → CO2 + 2H2O. The products in this reaction include carbon dioxide and water.
Does carbon dioxide pose a danger to people?Numerous health implications from CO2 exposure might be experienced. These symptoms could include a coma, hypoxia, convulsions, shivering, a tingling or pins-and-needles feel, headaches, disorientation, restlessness, a tingle or pins-and-needles sensation, and trouble breathing.
What is the aim of carbon dioxide?As a refrigerant, carbon dioxide is used in fire extinguishers, to blow life jackets and rafts, burst coal, foam rubber and plastics, seedlings in greenhouses, immobilize creatures before slaughter, and flavor carbonated drinks.
To know more about carbon dioxide visit:
https://brainly.com/question/15153008
#SPJ4
How do you calculate genotype frequency Hardy-Weinberg?
By using this equation p² + 2pq + q² = 1 we can calculate genotype frequency Hardy-Weinberg.
What is Hardy-Weinberg equation?
The Hardy-Weinberg equation is used to calculate the frequency of genotypes (different versions of a gene) in a population. The equation assumes that the population is in genetic equilibrium, meaning that there is no natural selection, mutation, migration, or genetic drift occurring. Given the frequency of the two alleles (versions) of a gene in a population, the equation can be used to calculate the frequency of the different genotypes (homozygous dominant, heterozygous, and homozygous recessive).
Here's how you can calculate genotype frequency using the Hardy-Weinberg equation:
Determine the frequency of the two alleles (A and a) in the population. Let p be the frequency of the dominant allele (A) and q be the frequency of the recessive allele (a).Calculate the frequency of homozygous dominant individuals (AA) using the formula: p^2Calculate the frequency of heterozygous individuals (Aa) using the formula: 2pqCalculate the frequency of homozygous recessive individuals (aa) using the formula: q^2Verify that the sum of the frequencies of the three genotypes equals 1.0 (100%).p^2 + 2pq + q^2 = 1
By using the Hardy-Weinberg equation, you can predict the genotype frequencies in a population under the assumption of genetic equilibrium.
Therefore, with this equation p² + 2pq + q² = 1 we can calculate genotype frequency Hardy-Weinberg.
To learn more about Hardy-Weinberg equation from the link
https://brainly.com/question/16823644
#SPJ4
identify the solid product that forms when the following aqueous solutions are mixed: cocl2(aq) na2s(aq) →
The molecule that results from combining the aqueous solutions as specified in the question is called CoS.
Give an example of a chemical equation.
The reactant entities are presented on the left hand side of a chemical equation, while the product entities are given on the right hand side. A chemical equation is a symbolic representation of a chemical reaction in the form of symbols and equations.
A chemical Equation Class 10 is what?
Chemical Formula: Chemical equations are used to represent chemical reactions using the symbols and substance formulae. For instance, A + B = C + D. A and B are referred to in this equation as the reactants, and C and D are referred to as the products.
To know more about aqueous solutions visit:
brainly.com/question/26856926
#SPJ4
Please help me with this!!!!
The drops of liquid on the outside of Jacob's glass are due to condensation.
What do you mean by Condensation?Condensation is a physical process where a substance changes from a gaseous state to a liquid state. This phase change occurs when the temperature of the gas decreases, causing the gas particles to lose energy and come together to form liquid droplets. The process of condensation releases heat energy and is often accompanied by an energy transfer from the surrounding environment to the substance undergoing condensation.
Condensation is a phase change from a gas to a liquid, in which molecules in the air come into contact with the cold surface of the glass and lose enough energy to transition from a gaseous state to a liquid state. This process of condensation releases energy and is accompanied by an energy transfer from the glass to the surrounding air.
The liquid on the glass is most likely water, since lemonade contains a significant amount of water. The water on the outside of the glass came from the water molecules in the lemonade that were evaporated by the heat of the surrounding air. The condensation process then caused these evaporated water molecules to condense back into a liquid state on the cold surface of the glass.
To know more about evaporate visit:
https://brainly.com/question/2013258
#SPJ1
T/F a meniscus is the curve that forms at the surface of a liquid.
True , a meniscus is the curve that forms at the surface of a liquid.
What causes a liquid's surface to curve?
The meniscus is the term used to describe the liquid's concave surface. As you fill a volumetric pipette or flask, check sure the meniscus's bottom is precisely level with the calibration mark.
Meniscus refers to the liquid's concave surface. As you fill a volumetric pipette or flask, check sure the meniscus's bottom is precisely level with the calibration mark.
Why does a meniscus develop?
Because fluid molecules like to stick together and are drawn to the molecules in the glass beaker's wall, a meniscus is created when the molecules of the fluid that are in contact with the glass cling to the molecules that are in contact with the fluid.
Learn more about the calibration mark
brainly.com/question/30286269
#SPJ4
can an object with no net charge have an electric field?
Which of the following statements correctly describes the typical number of bonds for carbon, nitrogen, and oxygen in most neutral organic molecules? Carbon forms 4 covalent bonds, nitrogen forms 5 covalent bonds, and oxygen forms 4 covalent bonds. Carbon forms 4 covalent bonds, nitrogen forms 5 covalent bonds, and oxygen forms 2 covalent bonds. Carbon forms 4 covalent bonds, nitrogen forms 2 covalent bonds, and oxygen forms 3 covalent bonds. Carbon forms 4 covalent bonds, nitrogen forms 3 covalent bonds, and oxygen forms 2 covalent bonds.
Carbon forms 4 covalent bonds, oxygen forms 4 covalent bonds and nitrogen forms 5 covalent bonds in most neutral organic molecules.
A covalent bond is formed between two atoms by mutually sharing one or more pairs of electrons. The electrons are attracted at the same time to two atom nuclei. These types of bonds are formed when the electronegativities between two atoms is too less for the transfer of electrons to form ions. There are three types of covalent bonds. The three types are: single covalent bond, double covalent bond and triple covalent bond. This forms a stable balance between the attractive and repulsive forces between two atoms.
Learn more about organic molecules here brainly.com/question/10504103
#SPJ4
what is the mole fraction of ar in a sample with 12.4 grams ar
As a result, the sample's mole fraction of Argon is 1.000, or 100%.
What is mole?A mole is a crucial unit of measurement for chemists. A mole of anything equals 602,214,076,000,000,000,000,000 of that item, just as a dozen eggs equals twelve eggs. The mole is the amount of stuff in a system that has as many elementary entities as there are atoms in 0.012 kilogram of carbon 12; its symbol is "mol". The mole fraction of a component in a mixture is the ratio of its moles to the total number of moles in the mixture. To calculate the mole fraction, you must first determine the component's molar mass and the number of moles in the sample.
Here,
The molar mass of Argon is 39.948 g/mol. To convert the number of grams of Argon to moles, divide the mass by the molar mass:
12.4 g / 39.948 g/mol = 0.311 moles
To calculate the mole fraction, divide the number of moles of Argon by the total number of moles in the sample:
0.311 moles / 0.311 moles = 1.000, or 100%
So the mole fraction of Argon in the sample is 1.000, or 100%.
To know more about mole,
https://brainly.com/question/22540912
#SPJ4
What is the volume of a solution, in mL, of sucrose, (C12H22O11) in water that contains 123 g of Sucrose and is 0.55 molar?
The volume of the solution in mL , of sucrose ( C₁₂H₂₂O₁₁) in the water and it contains the 123 g of the sucrose and is 0.55 M is 652 mL.
The mass of the sucrose, C₁₂H₂₂O₁₁ = 123 g
The molarity of the sucrose, C₁₂H₂₂O₁₁ = 0.55 M
The molar mass of the sucrose, C₁₂H₂₂O₁₁ = 342 g/mol
The number of the moles = mass / molar mass
The number of the moles = 123 / 342
= 0.359 mol
The molarity expression is as follows :
The molarity = moles / volume
Volume = moles / molarity
Volume = 0.359 / 0.55
Volume = 0.652 L
Volume = 652 mL
To learn more about molarity here
https://brainly.com/question/15947905
#SPJ4
In a system of gas, if we double the temperature what happens to the energy of the particles? The energy halves. The energy quadruples. The energy doubles. The energy stays the same.
If we double the temperature in a system of gas, the energy of the particles would double. Therefore, the correct answer is the third option.
In a system of gas, the temperature is a measure of the average kinetic energy that the particles have. When the temperature doubles, so do the average kinetic energy of the particles (it also doubles).
In other words, the energy of the particles is directly proportional to the temperature of the system. If the temperature quadrupled, the energy of the particles would also be quadrupled.
All of this is based on the kinetic theory of gases, a significant model of the thermodynamic behavior of gas.
Learn more about the kinetic theory of gas at https://brainly.com/question/11067389
#SPJ4
Which of the following is not related to chemical weathering: Frost wedging, dissolution, reactions with oxygen, and reactions with water?
Reactions with oxygen are not related to chemical weathering.
Chemical weathering is a process that changes the chemical composition of rock, minerals, and soils through chemical reactions. The following are common examples of chemical weathering:
Dissolution: This occurs when minerals dissolve in water, which can change the composition of the rock. For example, the minerals in limestone dissolve in rainwater that is slightly acidic, leading to the formation of caves.
Frost wedging: This occurs when water freezes and expands in cracks in rock, causing the rock to break apart. This is a mechanical process, but it can lead to chemical weathering if the broken rock is exposed to chemical weathering agents.
Reactions with water: This type of chemical weathering occurs when water reacts with minerals in rock, leading to the formation of new minerals or the alteration of existing minerals. For example, the reaction of water with feldspar minerals in granite can produce clay minerals.
Reactions with oxygen, on the other hand, are part of a separate process called oxidation, which is not considered to be a type of chemical weathering. In oxidation, the minerals in rock react with oxygen in the air to form new compounds, such as rust on iron-bearing minerals.
Learn more about oxidation here:
https://brainly.com/question/2525090
#SPJ4
A mineral contain 14.7% calcium and 67.7% tungsten, the reminder is oxygen.
Find the empirical formula
Given that CA=40
W=184
O=16
The empirical formulas of the compound is CaWO3.
What is the empirical formula?
The empirical formula is the simplest whole number ratio of elements in a compound. It gives the relative proportions of the elements present in a chemical species, but not the actual numbers or arrangement of atoms.
Now we know that;
Ca - 14.7% /40 W - 67.7% /184 O - 17.6/16
Ca - 0.36 W - 0.37 O - 1.1
Dividing through by the lowest ratio
Ca - 1 - W - 1 O - 3
The empirical formula of the compound is CaWO3
Learn more about empirical formula:https://brainly.com/question/14044066
#SPJ1