Warm air rises because faster moving molecules tend to move to regions of less

A) density.
B) pressure.
C) both of these
D) none of the above

Answer:

1140 J, 6840 J, 10260 J

Explanation:

Lo x 2 Lo x 3 Lo, Lo = 0.2 m,  K = 150 J/(s · m · C˚) , T = 35 ˚C, T' = 16 ˚C,

time, t = 6 s

The heat conducted is

[tex]H = \frac{K A (T - T') t}{d}\\\\H = \frac{150\times 3\times 0.2\times 0.2\times (35-16) \times 6}{3\times 0.2}\\\\H = 1140 J[/tex]

The heat conducted is

[tex]H = \frac{K A (T - T') t}{d}\\\\H = \frac{150\times 3\times 0.2\times 2\times0.2\times (35-16) \times 6}{3\times 0.2}\\\\H = 6840 J[/tex]

The heat conducted is

[tex]H = \frac{K A (T - T') t}{d}\\\\H = \frac{150\times 3\times 0.2\times 2\times0.2\times (35-16) \times 6}{2\times 0.2}\\\\H = 10260 J[/tex]

Answer:

The number of turns of wire needed is 573.8 turns

Explanation:

Given;

maximum emf of the generator, = 190 V

angular speed of the generator, ω = 3800 rev/min =

area of the coil, A = 0.016 m²

magnetic field, B = 0.052 T

The number of turns of the generator is calculated as;

emf = NABω

where;

N is the number of turns

[tex]\omega = 3800 \frac{rev}{min} \times \frac{2\pi}{1 \ rev} \times \frac{1 \min}{60 \ s } = 397.99 \ rad/s[/tex]

[tex]N = \frac{emf}{AB\omega } \\\\N = \frac{190}{0.016 \times 0.052\times 397.99} \\\\N = 573.8 \ turns[/tex]

Therefore, the number of turns of wire needed is 573.8 turns

Answer:

p = 1.2 kg-m/s

Explanation:

The question is, "An object of mass 0.5kg is moving along a rectilinear path with constant acceleration of 0.3m / s2. If it started from rest and the magnitude of its momentum in kg * m / s after 8s is".

Mass of the object, m = 0.5 kg

Acceleration of the object, a = 0.3 m/s²

We need to find the momentum after 8 seconds.

We know that,

[tex]p=F\times t[/tex]

i.e.

p = mat

So,

[tex]p=0.5\times 0.3\times 8\\\\p=1.2\ kg-m/s[/tex]

So, the momentum of the object is 1.2 kg-m/s.

Answer:

1.56 m/s²

Explanation:

Projectile motion is a form of motion where an object moves in parabolic path (trajectory). Projectile motion only occurs when there is one force applied at the beginning on the trajectory, after which the only interference is from gravity.

The total time (time of flight) of an object is given by:

T = 2usinθ / g

where u is the initial velocity, θ is the angle with horizontal and g is the acceleration due to gravity

Since the astronaut throws a rock straight up, hence θ = 90°, u = 19 m/s, T = 24.4 s.

T = 2usinθ / g

Substituting:

24.4 = 2(19)(sin90)/g

g = 2(19)(sin90) / 24.4

g = 1.56 m/s²

Answer:

[tex]N=0.37N[/tex]

Explanation:

Mass [tex]m=55g=>0.055kg[/tex]

Soapstone Density [tex]\rho_s=3000kg/m^2[/tex]

Whisky Density [tex]\rho_w=940kg/m^2[/tex]

Generally the equation for Force is mathematically given by

 [tex]F=U+N[/tex]

Therefore

 [tex]N=m*g-(\frac{m}{\rho_s})*\rho_w*g[/tex]

 [tex]N=0.055*9.81 - {(\frac{0.055}{3000})*940*9.81}[/tex]

 [tex]N=0.37N[/tex]

Answer:

Normal force exerted on the rover would be greater at a point on the surface of the planet where the weight of the rover is experienced to be greater.

Explanation:

Since weight is a vector quantity, it can vary with position. Weight is the amount of force the planet exerts on the rover centered towards the planet.

Such a force is the result of gravitational pull and is quantified as:

[tex]F=G\times \frac{M.m}{R^2}[/tex]

and [tex]M=\rho\times \frac{4\pi.r^3}{3}[/tex]

where:

R = distance between the center of mass of the two bodies (here planet & rover)

G = universal gravitational constant

M = mass of the planet

m = mass of the rover

This gravitational pull varies from place to place on the planet because the planet may not be perfectly spherical so the distance R varies from place to place and also the density of the planet may not be uniform hence there is variation in weight.

Weight is basically a force that a mass on the surface of the planet experiences.

According to Newton's third law the there is an equal and opposite reaction force on the body (here rover) which is the normal force.

Answer:

Acosθ

Explanation:

The x-component of a vector is defined as :

Magnitude * cosine of the angle

Maginitude * cosθ

The magnitude is represented as A

Hence, horizontal, x - component of the vector is :

Acosθ

Furthermore,

The y-component is taken as the sin of the of the angle multiplied by the magnitude

Vertical, y component : Asinθ

Answer:

  v = 2.75 10⁴ m / s

Explanation:

For this exercise we must use Kepler's third law which is an application of Newton's second law to the solar system

            F = ma

where force is the force of gravity

            F = [tex]G \frac{m M}{r^2}[/tex]

acceleration is centripetal

             a = [tex]\frac{v^2}{r}[/tex]

we substitute

           G m M / r² = m v² / r

           [tex]\frac{GM}{r}[/tex] = v²

           v = [tex]\sqrt{GM/r}[/tex]

indicate that the radius of the orbit is r = 1.17 AU, let's reduce to the SI system

            r = 1.17 AU (1.496 10¹¹ m / 1 AI) = 1.76 10¹¹ m

let's calculate

         v = [tex]\sqrt{\frac{6.67 \ 10^{-11} 1.991 \ 10^{30} }{ 1.76 \ 10^{11}} }[/tex]Ra (6.67 10-11 1.991 10 30 / 1.76 10 11

         v = [tex]\sqrt{7.5454 \ 10^8 }[/tex]ra 7.5454 10 8

         v = 2.75 10⁴ m / s

Answer:

I could not find the answer or do it myself if I did find it I would defenetly share

we know density = mass/ volume

as mass = 0.6 g

and volume = 2cm³

so density = (6/20)(g/cm³)

0.3g/cm³ (ans)

Hope it helps

Answer:

A gold medal has the (minimum) dimensions of:

diameter = 60mm

thickness = 3mm

So we will work with those dimensions.

The medal is then a cyinder of diameter

D = 60mm = 6cm

and height:

H = 3mm = 0.3cm

Remember that the volume of a cylinder is:

V = pi*(D/2)^2*H

where pi = 3.14

Then the volume of a medal is:

V = 3.14*(6cm/3)^2*0.3cm = 3.768 cm^3

The density of the gold in g/cm^3 is:

d = 19.3 g/cm^3

And remember that:

density = mass/volume

So, if the volume is 3.768 cm^3

Then the mass will be:

mass = density*volume =  19.3 g/cm^3*3.768 cm^3 = 72.7 g

So, a single gold medal would weight 72.7 grams

And each gram of gold costs $40

Then the total cost of the gold medal would be:

value = $40*72.7 = $2,908

Now, if yo think that in the Olympics there are 35 sports (a lot with a large number of players) and near 50 disciplines, they need a lot of gold medals.

And each gold medal costs $2,908

So the total cost (only for the gold medals, ignoring the others) would be to high.

This is why the gold medals are made mostly of silver.

Answer:

The fundamental unit of force is kg.m/s²

Explanation:

According to Newton's second law of motion, force is given as the product of mass and acceleration.

Mathematically, force can be expressed as; F = ma

where;

F is the force

M is mass of the object, unit of mass = kg

a is acceleration of the object, unit of acceleration = m/s²

Force = kg x m/s²

Force = kg.m/s²  = Newton [N]

Therefore, the fundamental unit of force is kg.m/s²

Answer:

D) the two spheres remain of equal size.

Explanation:

Answer:

towards the center

Explanation:

that is the solution above

Answer:

2.70

Explanation:

pH = -log[H+]

pH = -log[2.0x10^-3]

pH = 2.70

Answer:

XL sleep usual Addison officer at home and ear is not a short time to be be free and ear is a short time to make a short time

Explanation:

so that I can take the class on Monday and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to be be free and ear is not a short time to time for a day or night and ear buds is Anshu and duster and duster fgor a day or night is Anshu and duster for a day or not a week of computer science from your computer and I am in the same as I am a short of ti and you can be the first time I will be be

Answer:

A) v_{f1} = -3.2 m / s,  B) LEFT , C) v_{f2} = -0.12 m / s,  D) LEFT

Explanation:

This is a collision exercise that can be solved using momentum conservation, for this we define a system formed by gliders, so that the forces during the collision are internal and the moment is conserved.

Let's use the subscript 1 for the lightest glider m1 = 0.160 kg and vo1 = 0.820 m / s

subscript 2 for the heaviest glider me² = 0.820 kg and vo2 = -2.27 m / s

Initial instant. Before the crash

          p₀ = m₁ v₀₁ + m₂ v₀₂

Final moment. After the crash

          p_f = m₁ v_{f1} + m₂ v_{f2}

          p₀ = p_f

          m₁ v₀₁ + m₂ v₀₂ = m₁ v_{f1} + m₂ v_{f2}

 as the shock is elastic, energy is conserved

         K₀ = K_f

         ½ m₁ v₀₁² + ½ m₂ v₀₂² = ½ m₁ [tex]v_{f1}^2[/tex] + ½ m₂ [tex]v_{f2}^2[/tex]

         m₁ (v₀₁² - v_{f1}²) = m₂ (v_{f2}² -v₀₂²)

let's make the relationship

         (a + b) (a-b) = a² -b²

         m₁ (v₀₁ + v_{f1}) (v₀₁-v+{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

let's write our two equations

         m₁ (v₀₁ -v_{f1}) = m₂ (v_(f2) - v₀₂)                                  (1)

         m₁ (v₀₁ + v_{f1}) (v₀₁-v_{f1}) = m₂ (v_{f2} + v₀₂) (v_{f2} -v₀₂)

we solve

         v₀₁ + v_{f2} = v_{f2} + v₀₂

we substitute in equation 1 and obtain

         M = m₁ + m₂

         [tex]v_{f1} = \frac{m_1-m_2}{M} v_o_1 + 2 \frac{m_2}{M} v_f_2[/tex]

         [tex]v_f_2 = \frac{2m_1}{M} v_o_1 + \frac{m_2-m_1}{M} v_o_2[/tex]vf2 = 2m1 / mm vo1 + m2-m1 / mm vo2

we calculate the values

         m₁ + m₂ = 0.160 +0.3000 = 0.46 kg

         v_{f1} = [tex]\frac{ 0.160 -0.300} {0.460} \ 0.820 + \frac{2 \ 0300}{0.460} \ (-2.27)[/tex]

         v_{f1} = -0,250 - 2,961

          v_{f1} = - 3,211 m / s

         v_{f2} = [tex]\frac{2 \ 0.160}{0.460} \ 0.820 + \frac{0.300 - 0.160}{0.460 } \ (-2.27)[/tex]

         v_{f2} = 0.570 - 0.6909

         v_{f2} = -0.12 m / s

now we can answer the different questions

A) v_{f1} = -3.2 m / s

B) the negative sign indicates that it moves to the left

C) v_{f2} = -0.12 m / s

D) the negative sign indicates that it moves to the LEFT

Answer:

Explanation:

From the information given:

The angular frequency ω = 430 π rad/s

The wavenumber k = 4.00π which can be expressed by the equation:

k = ω/v

∴

4.00 =  430 /v

v = 430/4.00

v = 107.5 m/s

Similarly: k  = ω/v = 2πf/fλ

We can say that:

k = 2π/λ

4.00 π = 2π/λ

wavelength λ = 2π/4.00 π

wavelength λ = 0.5 m

frequency of the wave can now be calculated by using the formula:

f = v/λ

f = 107.5/0.5

f = 215 Hz

Also, the Period(T) = 1/215 secs

The time at which particle proceeds from point A  to its maximum upward displacement  and to its maximum downward displacement  can be computed as t = T/2;

Thus, the distance(x) covered by each wave during this time interval(T/2) will be:

x = v * t

x = v * T/2

x = λ/2

x = 0.5/2

x =  0.25 m

Answer: [tex]29.85\ W/m^2[/tex]

Explanation:

Given

Power [tex]P=60\ W[/tex]

Distance from the light source [tex]r=0.4\ m[/tex]

Intensity is given by

[tex]I=\dfrac{P}{4\pi r^2}[/tex]

Inserting values

[tex]\Rightarrow I=\dfrac{60}{4\pi (0.4)^2}\\\\\Rightarrow I=\dfrac{60}{2.010}\\\\\Rightarrow I=29.85\ W/m^2[/tex]

Answer:

29.85 W/ m^2

Explanation:

Answer:

wareffctgggyyggghhhh

Answer:

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Explanation:

The centripetal acceleration is given as follows:

[tex]a_c = \frac{v^2}{r}\\[/tex]

where,

ac = centripetal acceleration

v = linear speed = rω

r = radius

ω = angular speed

Therefore,

[tex]a_c = \frac{(r\omega)^2}{r}\\\\a_c = r\omega^2[/tex]

Therefore, the ratio will be:

[tex]\frac{a_{c1}}{a_{c2}} = \frac{r_1\omega^2}{r_2\omega^2}\\\\\frac{a_{c1}}{a_{c2}} = \frac{r_1}{r_2}\\\\[/tex]

where,

r₁ = 6.7 m

r₂ = 3 m

Therefore,

[tex]\frac{a_{c1}}{a_{c2}} = \frac{6.7\ m}{3\ m}\\\\[/tex]

[tex]\frac{a_{c1}}{a_{c2}} = 2.23[/tex]

Answer:

1) attached below

2) assumption that the earth is spherical

Explanation:

1) Four illustrations of a globe

attached below

2) Reason for distortions at areas that do not fall on lines of tangency or secancy

The reason for distortion on areas outside the lines of tangency or secancy is because of the assumption that the earth is spherical which is not true hence map projections on the areas that fall on the lines of tangency do not experience distortion and are true

Answer:

v₂ = 53.23 m/s

Explanation:

Given that,

The mass of a golf club, m₁ = 158 g = 0.158 kg

The initial speed of a golf club, u₁  =  48.2 m/s

The mass of a golf ball, m₂ = 46 g = 0.046 kg

It was at rest, u₂ = 0

Immediately after the collision, the club head continues to travel in the same direction but at a reduced speed of 32.7 m/s, v₁ = 32.7 m/s

We use the conservation of energy to find the speed of the golf ball just after impact as follows :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\\v_2=\dfrac{m_1u_1-m_1v_1}{m_2}\\\\v_2=\dfrac{0.158(48.2)-0.158(32.7)}{0.046}\\\\=53.23\ m/s[/tex]

So, the speed of the golf ball just after the impact is equal to 53.23 m/s.

Answer:

 T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Explanation:

Let's use Newton's second law

          F = ma

force is the universal force of attraction and acceleration is centripetal

          G m M / r² = m v² / r

          G M / r = v²

as the orbit is circular, the speed of the satellite is constant, so we can use the kinematic relations of uniform motion

          v = d / T

the length of a circle is

          d = 2π r

we substitute

        G M / r = 4π² r² / T²

        T² = [tex]\frac{4\pi ^2 }{GM} \ r^3[/tex]

the distance r is measured from the center of the Earth (Re), therefore

        r = Re + h

where h is the height from the planet's surface

let's calculate

         T² = [tex]\frac{4\pi ^2}{ 6.67 \ 10^{-11} \ 1.991 \ 10^{30}}[/tex]   (Re + h) ³

         T = [tex]\sqrt{29.72779 \ 10^{-20}} \ \sqrt[2]{R_e+h)^3}[/tex]

         T = 5.45 10⁻¹⁰   [tex]\sqrt{(R_e + h)^3}[/tex]

Answer:

Magnesium Chloride: MgCl2

Sodium Sulfate: Na2SO4

Answer:

C.  Rotational motion

Explanation:

The kinematics of rotational motion describes the relationships between the angle of rotation, angular velocity, angular acceleration, and time. It only describes motion—it does not include any forces or masses that may affect rotation (these are part of dynamics). Recall the kinematics equation for linear motion: v = v+at (constant a).

Rotational motion is mutually exclusive with each of the others. Hence, option (C) is correct.

"The motion of an object around a circular route, in a fixed orbit, is referred to as rotational motion."

Rotational motion dynamics are identical to linear or translational dynamics in every way. The motion equations for linear motion share many similarities with the equations for the mechanics of rotating objects. Rotational motion only takes stiff bodies into account. A massed object that maintains a rigid shape is referred to as a rigid body.

Curvilinear motion is the movement of an object along a curved route. Example: A stone hurled at an angle into the air.

The motion of a moving particle that follows a predetermined or known curve is referred to as curvilinear motion. Two coordinate systems—one for planar motion and the other for cylindrical motion—are used to examine this type of motion.

Learn more about motion here:

https://brainly.com/question/22810476

#SPJ2

Full Question:

What is the temperature of a system in thermal equilibrium with another system made up of water and steam at one atmosphere of pressure?

A) 0°F

B) 273 K

C) 0 K

D) 100°C

E) 273°C

Answer:

The correction Option is D) 100°C

Explanation:

The temperature above is referred to as the critical point.

it is the highest temperature and pressure at which water (which has three phases - liquid, solid, and gas) can exist in vapor/liquid equilibrium. If the temperature goes higher than 100 degrees celsius, it cannot remain is liquid form regardless of what the pressure is at that point.

There is also a condition under which water can exist in its three forms: that is  

- Ice (solid)

- Liquid (fluid)

- Gas (vapor)

That state is called triple point. The conditions necessary for that to occur are:

Cheers

Cheers

Answer:

[tex]\mathbf{F_1=4.41*10^4\ N}[/tex]

[tex]\mathbf{F_2 = 1.176*10^5 \ N}[/tex]

Explanation:

The missing image of the figure slide is attached in below.

However, from the model, it is obvious that it is in equilibrium.

As a result, the relation of the force and the torque is said to be zero.

i.e.

[tex]\sum F = 0[/tex] and [tex]\sum \tau = 0[/tex]

From the image, expressing the forces through the y-axis, we have:

[tex]F_1+F_2 = W_B + W_P \\ \\ \implies 9.8(1500+15000) \\ \\ \implies \mathtt{1.617\times 10^5 \ N}[/tex]

Also, let the force [tex]F_1[/tex] be the pivot and computing the torque to determine [tex]F_2[/tex]:

Then:

[tex]F_1(0)+F_2(20.0) = 10.0W_B + 15.0W_P[/tex]

[tex]F_2 = \dfrac{((10*1500)+(15*15000))*9.8}{20.0}[/tex]

[tex]F_2 = 117600 \ N[/tex]

[tex]\mathbf{F_2 = 1.176*10^5 \ N}[/tex]

For the force equation:

[tex]F_1+F_2=1.617*10^5 \ N;[/tex]

where:

[tex]F_2 = 1.176*10^5 \ N[/tex]

Then:

[tex]F_1+1.176*10^5 \ N=1.617*10^5 \ N[/tex]

[tex]F_1=1.617*10^5 \ N-1.176*10^5 \ N[/tex]

[tex]F_1=44100\ N[/tex]

[tex]\mathbf{F_1=4.41*10^4\ N}[/tex]

Answer:

i think the answer is 0.001m³

Answer:

1 eV = 1.60 * 10^-19 J      work done in accelerating electron thru 1 V

KE (total energy) = 1350 ^ 1 eV     (note proton goes from +  to -)

KE = 1.60 * 10^-19 * 1350 = 2.16 * 10^-16 Joules

1/2 m v^2 = KE = 2.16 * 10^-16 J

v^2 = 4.32 * 10E-16 / 1.67 * 10-27 = 2.59 * 10^11

v = 5.09 * 10^5 m/s

The proton's kinetic energy, in joules is  2.16 *[tex]10^{-16}[/tex] J. The proton's velocity is 5.09 * [tex]10^{5}[/tex]m/s.

When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time.

Uniform motion an object is said to have uniform motion when object cover equal distance in equal interval of time within exact fixed direction. For a body in uniform motion, the magnitude of its velocity remains constant over time.

1 eV = 1.60 * [tex]10^{-19} J[/tex]     work done in accelerating electron throw 1 V

K.E (total energy) = 1350 ^ 1 eV     (note proton goes from +  to -)

K.E = 1.60 * [tex]10^{-19}[/tex]J * 1350 = 2.16 * [tex]10^{-16}[/tex] Joules

1/2 m v² = KE = 2.16 *[tex]10^{-16}[/tex] J

Velocity of proton is,

v² = 4.32 * 10[tex]e^{-16}[/tex] / 1.67 * [tex]10{-27}[/tex] = 2.59 * [tex]10^{11}[/tex]

v = 5.09 * [tex]10^{5}[/tex]m/s

The proton's kinetic energy, in joules is  2.16 *[tex]10^{-16}[/tex] J. The proton's velocity is 5.09 * [tex]10^{5}[/tex]m/s.

To learn more about velocity refer the link:

brainly.com/question/18084516  

#SPJ2