Using any data you can find in the ALEKS Data resource, calculate the equilibrium constant k at 25.0 celsius for the following reaction.
6Cl2(g)+2Fe2O3(s)----->4FeCl3(s)+3O2
Round answer to 2 significant digits.

Answer:

Does a reaction occur when aqueous solutions of copper(II) nitrate and calcium chloride are combined?

Explanation:

The given reaction is an example of a chemical double displacement reaction.

The mutual interchange of the ions takes place.

The balanced chemical equation of the reaction is:

[tex]Cu(NO_3)_2(aq)+CaCl_2(aq) -> Ca(NO_3)_2(aq)+CuCl_2(aq)[/tex]

All the products formed are also highly soluble.

So, all the ions are spectator ions.

Hence, all will cancel with each other and ions remain in the net ionic equation and hence, the reaction does not take place.

Answer:

a. The student performed the splint test incorrectly. He should of observed a popping sound when the splint was placed in the test tube.

Explanation:

It is given that a student performed an experiment where he dropped a nickel metal in to HCl solution. He observed the reaction and performed a splint test in the test tube that is filled with a gas which is formed while Nickle is dropped into the solution of HCl.

But the experiment that the student performed was incorrect. He must have observed the popping sound when the splint was placed in the test tube.

When the splint was added to the gas splint flared up. The hydrogen gas pops out when exposed to the flame.

[tex]$Ni + HCl(aq) = NiCl + H_2$[/tex]

Thus the correct option is (a).

Answer:

It predicts whether or not a reaction will be spontaneous.

Explanation:

The equation;

∆G= ∆H - T∆S enables us to obtain the Gibbs free energy of a chemical process.

The Gibbs free energy value tells us whether a chemical process will be spontaneous or not.

When;

∆G>0 the reaction is not spontaneous

∆G=0 the reaction is at equilibrium

∆G<0 the reaction is spontaneous

Answer:

Nuclear

Solar

Wind

Hydro

Geo-Thermal

Explanation:

hope it helps

Answer:

8.61 %

Explanation:

The percent of sodium hypochlorite in the bleach sample can be calculated using the following formula:

We input the data given by the problem:

Answer:

"1.4 mL" is the appropriate solution.

Explanation:

According to the question,

Now,

Increase in volume will be:

⇒ [tex]\Delta V = \alpha\times v_0\times \Delta \epsilon[/tex]

By putting the given values, we get

           [tex]=1.12\times 10^{-4}\times 500\times 25[/tex]

           [tex]=1.12\times 10^{-4}\times 12500[/tex]

           [tex]=1.4 \ mL[/tex]

Answer:

sodium ions and chloride ions

chloride ion

sodium ion

Explanation:

Ionic substances are composed of ions. When you dissolve an Ionic substance in water, the ions that compose the substance together with water molecules are present in solution.

Hence, when sodium chloride is dissolved in water, sodium ions and chloride ions are released in solution.

Water has a dipole moment. Hence, the chloride ions are attracted to hydrogen (the positive end of the dipole) while sodium ions are attracted to oxygen (the negative end of the dipole).

This is how the solid is dissolved in water.

When sodium chloride, NaCl , dissolves in water, the solution contains sodium and chloride ions in addition to the water solvent. The partial charges in water help dissolve the compound as the hydrogen end of water is attracted to the chloride ions and the oxygen end is attracted to the sodium ions.

Those molecules in which positive ion as well as negative ion is present, will show solubility in water.

Sodium chloride (NaCl) is an ionic compound, which dissociates into sodium ion and chloride ion in the water. As in the water H⁺ ions are present which get attracted towards the chloride ions (Cl⁻) and hydroxide ion (OH⁻ ion) get attracted towards the sodium ions (Na⁺) and show complete dissolution.

Hence correct answers are sodium and chloride ions, chloride ion and sodium ion.

To know more about solubility in water, visit the below link:
https://brainly.com/question/16903071

Answer: If a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Explanation:

The relation between energy and wavelength is as follows.

[tex]E = \frac{hc}{\lambda}\\[/tex]

This means that energy is inversely proportional to wavelength.

As it is given that energy of a hydrogen atom and a helium atom is same.

Let us assume that [tex]E_{hydrogen} = E_{helium} = E'[/tex]. Hence, relation between their wavelengths will be calculated as follows.

[tex]E_{hydrogen} = \frac{hc}{\lambda_{hydrogen}}[/tex]    ... (1)

[tex]E_{helium} = \frac{hc}{\lambda_{helium}}[/tex]         ... (2)

Equating the equations (1) and (2) as follows.

[tex]E_{hydrogen} = E_{helium} = E'\\\frac{hc}{\lambda_{hydrogen}} = \frac{hc}{\lambda_{helium}} = E'\\\lambda_{helium} = \lambda_{hydrogen} = E'[/tex]

Thus, we can conclude that if a hydrogen atom and a helium atom have the same kinetic energy then the wavelength of the hydrogen atom will be roughly equal to the wavelength of the helium atom.

Answer:

Multiply the number of moles of butane by its molar mass, 58.12g/mol, to produce the mass of butane. Mass of butane = 18.8g.

Explanation:

Part B:

The mass of water produced when 4.86 g of butane(C4H10) react with excess oxygen is calculated as below

calculate the moles of C4H10 used = mass/molar mass

moles = 4.86g/58 g/mol =0.0838 moles

write a balanced equation for reaction

2 C4H10 + 13 O2 = 8 CO2 + 10 H2O

by use of mole ratio between C4H10 to H2O which is 2:10 the moles of

H20= 0.0838 x10/2 = 0.419 moles of H2O

mass = moles x molar mass

=0.419 molx 18 g/mol = 7.542 grams of water is formed

Explanation:

hope the picture above helps you to understand:)

Answer:

False

Explanation:

An object with a density less than the density of water will float.

And an object that is denser than water (more than 1.00g/mL) will sink when placed in water.

Answer:

3 > 2> 1

Explanation:

Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.

Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.

Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.

If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.

Answer:

Explanation:

The mechanism of the reaction is shown in the diagram below. From the reaction, when (2S,3S)-2-Bromo-3-phenylbutane undergoes a reaction with sodium ethoxide (ETONa), the E2 elimination reaction is put into place. Here, the H and the leaving group are antiperiplanar to one another and the reaction mechanism proceeds to form an isomeric (E)-2-phenyl-2butane as the major product.

Answer:

Electrolytic cell. Salt bridge.

Explanation:

Match the following terms to their correct definitions.

Answer: It is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.

Explanation:

When one element in a compound is replaced by another element in a chemical reaction then it is called a single replacement reaction.

For example, [tex]K + NaCl \rightarrow KCl + Na[/tex]

Here, potassium metal is replacing the sodium metal in the sodium chloride compound.

As metals become cation by losing an electron in a chemical reaction.

Thus, we can conclude that it is true about the type of reaction that it is a single replacement reaction, and the cations in the two ionic compounds are different.

Answer: Its A

Explanation:

a single replacement reactions, and the ANIONS in the two ionic compounds are different

Answer:

True

Explanation:

Evaporation is the process by which a substance changes its state from liquid to gas. evaporation occurs at all temperatures but it's rate increases as temperature increases.

Pure water vapour can be produced by evaporation.

As the liquids are removed, the solids present in solution becomes more concentrated.

Answer:

A. an acid

B. a base

C. conjugate base

D. conjugate acid

Explanation:

This question appears incomplete because it is starting with a "or".

However, the available question can still be answered.

An acid (according to "Bronsted-Lowry") is a chemical compound/specie that can donate hydrogen ion(s) in a reaction while a base is the compound/specie that can receive hydrogen ion(s). From this definition, it can be deduced that CH₃COOH (ethanoic acid) is an acid (weak acid) because it can donate an hydrogen ion while CH₃COO⁻ is a base because it can receive a hydrogen ion.

Also, a conjugate acid is the compound formed when an acid has donated a hydrogen ion to a base (i.e it is a base with hydrogen ion attached to it) while a conjugate base is the acid that has lost it's hydrogen ion. Thus, the conjugate acid in the question is CH₃OH while the conjugate base in the question is CH₃O⁻.

A. an acid

B. a base

C. conjugate base

D. conjugate acid

Answer:

Yes because same topic are long

Answer:

These batteries are constructed of several single cells connected in series each cell produces approximately 2.1 volts. ... A battery cell consists of two lead plates a positive plate covered with a paste of lead dioxide and a negative made of sponge lead, with an insulating material (separator) in between.

Answer: Moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Explanation:

Given: Mass of methane = 146.6 g

As moles is the mass of a substance divided by its molar mass. So, moles of methane (molar mass = 16.04 g/mol) are calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{146.6 g}{16.04 g/mol}\\= 9.14 mol[/tex]

The given reaction equation is as follows.

[tex]C + 2H_{2} \rightarrow CH_{4}[/tex]

This shows that 2 moles of hydrogen gives 1 mole of methane. Hence, moles of hydrogen required to form 9.14 moles of methane is as follows.

[tex]Moles of H_{2} = \frac{9.14}{2}\\= 4.57 mol[/tex]

Thus, we can conclude that moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Answer:

Filtration is a technique used as a remedy to separate mixes

Explanation:

If you have a sodium, then you will explore that salt dissolves but the sand is still the same.

If the salt in the resin water solution scanners, the sand remains the residue and passes through the filter paper.

All you have to do now is pleasant the salty water so that the water can evaporate, leaving the salt behind.

Answer:

Hindi ko po ma gets sinasabi nyu pwedeng pakiayus

Answer:

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Explanation:

pH is a measure of the acidity or alkalinity of an aqueous solution. The pH indicates the concentration of hydrogen ions present in certain solutions. Mathematically it is defined as the opposite of the base 10 logarithm or the negative logarithm of the activity of hydrogen ions, whose equation is

pH= -log [H⁺]

So, being pH= 2.6 and replacing in the definition of pH:

2.6= -log [H⁺]

[tex][H^{+} ]=10^{-2.6}[/tex]

[H⁺]=2.51*10⁻³

pOH is a measure of the concentration of hydroxide ions (OH⁻). The sum between the pOH and the pH results in 14:

pOH + pH= 14

So, being pH= 2.6:

pOH + 2.6= 14

pOH= 14 - 2.6

pOH= 11.4

The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH⁻ ions:

pOH= - log [OH⁻]

Being pOH= 11.4 and replacing

11.4= -log [OH⁻]

[tex][OH^{-} ]=10^{-11.4}[/tex]

[OH⁻]= 3.98*10⁻¹²

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Answer:

The kinds of intermolecular forces that are present in each element Kr-Kr.

Explanation:

Since Kr is an inert gas and in atomic form only it is highly stable.

So, Kr gas does not form molecules.

Between the atoms of inert gas, there exist London dispersion forces.

Hence, the intermolecular forces that are present between Kr-Kr atoms is London dispersion forces.

Answer:

90grams

Explanation:

The reaction given in this question is as follows:

2H2 + O2 → 2H20

Based on this equation, 1 mole of oxygen gas (O2) produces 2 moles of water (H2O)

Hence, 2.50moles of oxygen gas will react with excess hydrogen gas to produce (2.5 × 2) = 5.0moles of water.

Using mole = mass/molar mass

Molar mass of water (H2O) = 1(2) + 16

= 18g/mol

5 = mass/18

mass = 18 × 5

mass of H2O = 90grams

Answer:

Gases act more ideal at lower pressure beacuse the attractive forces between molecules will decrease or become less significant compared to the empty space between them.

Explanation:

Generally, a gas behaves more like an ideal gas at higher temperature and lower pressure as the potential energy due to intermolecular forces becomes less significant compared with the particles "kinetic energy" and the size of the molecules become less significant compared to the empty space between them.

Attractive forces between molecules, decrease the pressure of a reak gas, slowing the molecules and reducing collisions with the walls.The higher the value of a gas, the greater the attraction between molecules and the more easily the gas will compress.

answered by: John Glenly Pillazo Mahusay

Answer:

[tex] a = \frac {2A - bh}{h} [/tex]

Explanation:

Given the following mathematical expression;

A = ½(a + b)h

To make a the subject of formula (express a in terms of A, b and h);

First of all, we would cross-multiply;

2A = (a + b)h

Opening the bracket, we have;

2A = ah + bh

Rearranging the mathematical expression, we have;

ah = 2A - bh

[tex] a = \frac {2A - bh}{h} [/tex]