Use Gauss's Law to find the electric field produced by an infinite plane of uniformly distributed charge Q, with charge density σ. Draw the appropriate Gaussian Surface
Answers
Answer:
Explanation:
Consider an endless sheet of uniform charge thickness per unit area [tex]\sigma[/tex]
For a boundless sheet of charge, the electric field will be opposite to the surface. In this way, just the closures of a round and hollow Gaussian surface will add to the electric transition. For this situation, around and hollow Gaussian surface opposite to the charge sheet is utilized. The subsequent field is a large portion of that of a conductor at harmony with this surface charge thickness.
By balance, we expect the electric field on one or the other side of a plane to be an element of x just to be guided typical to the plane and to point away from/towards the plane contingent upon whether, [tex]\sigma[/tex] is positive/negative.
According to the law;
[tex]2EA = \dfrac{q_{enc}}{\varepsilon_o}[/tex]
[tex]where; \ q_{enc} = total \ enclosed charge = \sigma A \\ \\ thus; \\ \\ 2EA = \dfrac{\sigma A}{\varepsilon_o} \\ \\ E = \dfrac{\sigma}{2 \varepsilon _o}[/tex]
Related Questions
Shrill sound is of -------------- *
Higher frequency
Lower frequency
Higher amplitude
Lower amplitude
Answers
Answer:
Higher frequency.
Explanation:
Sound are mechanical waves that are highly dependent on matter for their propagation and transmission.
Sound travels faster through solids than it does through either liquids or gases. A student could verify this statement by measuring the time required for sound to travel a set distance through a solid, a liquid, and a gas.
Mathematically, the speed of a sound is given by the formula:
[tex] Speed = wavelength * frequency [/tex]
Generally, the frequency of a sound wave determines the pitch of the sound that would be heard.
A shrill sound refers to a type of sound that is typically sharp, high pitched and as such has higher frequency.
Hence, shrill sound is of higher frequency.
Two rocks of masses 5 kg and 10 kg a dropped from rest from a height of 20 m above ground. Ignore all friction and air resistance. Just before
they hit the ground, which statement is true about the rocks?
(A) The value for the acceleration of the 5 kg rock is the same as the value for the 10 kg rock, but their velocity values are different.
(B) The values for the acceleration and velocity of the 5 kg rock are greater than the values for the 10 kg rock.
(C) The values for the acceleration and velocity of the 5 kg rock are less than the values for the 10 kg rock.
(D) The values for the acceleration and velocity of the 5 kg rock are the same as the values for the 10 kg rock.
Answers
Answer:
D
Explanation:
F=ma
F of 5 kg rock = 49N
F of 10 kg rock = 98 N
Divide by respective masses to get acceleration, and of course you will get 9.8 m/s^2 for both.
Now, use potential energy equals kinetic energy. mgh=(1/2)mv^2 mass cancels out of the equation, since it's on both sides, so we can stop right there. We have algebraically determined that mass does not affect acceleration or velocity!
Hope this helped.
What is the speed of a rocket that travels 10000 meters in 15 seconds?
Help a brother out
Answers
Answer:
666.67
Explanation:
the formula is speed = distance ÷ time
by the way I approximated the answer hope that it help I'm not sure it's right but I hope it is.
Which is NOT an example of evidence that shows a chemical reaction occurred?
change in color
change in temperature
change in shape
bubbles, fizzing
Answers
Change in color is a physical reaction
Which pair of moving pulses in a rope will produce
destructive interference?
Answers
What is the speed of a rocket that travels 9,000 meters in 12 seconds?
Answers
Speed is equal to distance divided by time
What is the cheetahs momentum?
Answers
Answer:
Momentum is mass*velocity. Cheetah: 74*31 = 2294 kg-m/s.
Solids, liquids, and gases are very often depicted as groups of particles inside containers of fixed shape and dimension.
Using the simple model of solid, liquid, and gas, which of the following descriptions of physical properties is CORRECT?
A
The physical properties of this phase of matter are that the particles take the shape of the container, do not fill the entire volume, and are very strongly attracted to each other.
B
The physical properties of this phase of matter are that the particles take the shape of the container, do not fill the entire volume, and are strongly attracted to each other.
C
The physical properties of this phase of matter are that the particles take the shape of the container, they fill the entire volume of the container, and are strongly attracted to each other.
D
The physical properties of this phase of matter are that the particles do not take the shape of the container, they fill the entire volume, and are weakly attracted to each other.
Answers
Answer:
The answer would be B
Explanation:
Hope you have a good day
What is the object’s average acceleration between 0.0 s and 5.0 s?
ANSWER FAST! PLEASEE
Answers
Answer:
[tex]2.5[/tex]
Explanation:
[tex]0.0+5.0=5.0[/tex]
[tex]\frac{5}{2} =2.5[/tex]
hope this helps!!!!!!!!!!
c. Before space travel some people thought rockets would not work in space because there was no
atmosphere for the rocket exhaust to push against. Explain the error in this thinking using Newton's
third law.
Answers
I NEED THIS ANSWERED ASAP WITH THE RIGHT ANSWER
A bicycle with a 15 kg mass is easily stopped when a force of 60 N is applied. How much force would be needed to stop the bicycle if the time allowed to stop the bike was doubled?
Answers
Answer:
Going downhill at a steady speed, the forces along the direction of motion are:
net force = m * a = 0
W * sin(7) - Fdrag = 0
so Fdrag = m * g * sin(7) where m=62.kg and g=9.8m/sec^2
Explanation:
testing related to criteria
Answers
Answer: Test criteria offers assistance the analyzer(s) to compose the test prepare. They ought to be chosen in understanding with the accessible test exertion. Test scope measures are characterized as a proportion between the test cases required for fulfilling the criteria and those of these which have been executed
Answer 7575
Explanation: the numbers are cool
If a ball that is 10 meters above the ground is thrown horizontally at 5.51 meters per second. a. how long will it take for the ball to hit the ground? b. how far will the ball travel in the horizontal direction before it hits the ground?
Answers
Answer:
a. t = 1.43 s
b. d = 7.88 m
Explanation:
a. The time of flight can be found using the following equation:
[tex] y_{f} = y_{0} + v_{0_{y}}t - \frac{1}{2}gt^{2} [/tex]
Where:
[tex]y_{f}[/tex]: is the final height = -10 m
[tex]y_{0}[/tex]: is the initial height = 0
[tex]v_{0_{y}}[/tex]: is the initial speed in the vertical direction = 0
g: is the acceleration due to gravity = 9.81 m/s²
By solving the above equation for "t" we have:
[tex] t = \sqrt{\frac{2y_{f}}{g}} = \sqrt{\frac{2*10 m}{9.81 m/s^{2}}} = 1.43 s [/tex]
Hence, the ball will hit the ground in 1.43 s.
b. The distance in the horizontal direction can be found as follows:
[tex] x_{f} = x_{0} + v_{0}t + \frac{1}{2}at^{2} [/tex]
Where:
x₀: is the initial position in the horizontal direction = 0
a: is the acceleration in the horizontal direction = 0 (it is moving at constant speed)
[tex] x_{f} = 5.51 m/s*1.43 s = 7.88 m [/tex]
Therefore, the ball will travel 7.88 m before it hits the ground.
I hope it helps you!
Warm air rises because it has less ___________.
Answers
Answer:
because it is less dense than the surrounding air
Explanation:
A piece of metal has a volume of 2.0 x 10-5 m3.
The density of the metal is 8.0 x 103 kg/m3.
What is its mass?
A. 2.5 103 kg
B.4.0 x 102 kg
C.1.6 101 kg
D.1.6 x 105 kg
Answers
Hope it helps
Help Easy Question and Brainly. What's the answer?????
Answers
Answer:
negatively
Explanation:
Answer:
Negatively charged
Explanation:
PLS ANSWER MY QUESTION TOO
Provide two examples of how health care workers can demonstrate their commitment to quality control through their personal appearance.
Answers
Attitude:
Our job is to serve our customers and provide high quality service with care and courtesy.
Always thank customers for choosing our organization.
Exceed expectations.
Acknowledge a customer’s presence immediately. Smile and introduce yourself at once.
Attitude takes into account three things: our body language, our friendliness and our willingness to connect with our customers.
The body language that goes along with the words that we are speaking greatly influences how we are understood. In fact, experts tell us that how we speak is just as important as what we are saying! Our customers are our reason for being in the healthcare environment; our attitude should always be one of concern, respect and genuine caring.
As a customer yourself, do you remember those places of business where the staff was friendly and went out of its way to acknowledge you? Of course you do, since this was an environment where you felt welcomed. We exhibit friendliness by smiling warmly, introducing ourselves immediately, and never, ever ignoring someone. All our customers are equally deserving of attention.
Finally, we show the right attitude by meeting the needs of our customers or finding someone who can. We go out of our way to be helpful; for example, we don’t point the way – we accompany the customer to where they need to go. In addition, we always thank them for choosing us to provide their healthcare experience.
An attitude of service excellence is further exhibited by showing interest when a customer speaks to us. Each one, without exception, should be treated as if he or she is the most important person in our facility; and rudeness is never acceptable. We are attentive to the customer’s immediate need, or gladly take the individual to someone better equipped to provide the service. We always apologize for problems and inconveniences, and enthusiastically carry out service recovery.
Lastly, we recognize that our customers have a sense of urgency and show them that we value their time. Customers are not an interruption of our work; they are our focal point, and caring for them with an attitude that shows we value them should be our daily goal.
Appearance:
Be clean and professional.
Follow dress code policies and wear your identification badge correctly at all times.
Pick up litter and dispose of it properly.
Clean up spills and return equipment to its proper place.
How long does it take to make a first impression on a customer? Just seven seconds, according to popular research. How our customers perceive us in that brief time is very important because it sets the stage for their entire healthcare experience. A first impression is sometimes referred to a “moment of truth” because customers believe that what they are hearing, seeing or feeling is reality – that is, the truth of the situation. No matter that their first impression is merely a snapshot of less than one moment in time. It is perceived as genuine: who we are, the quality of service that we deliver, or our physical environment of care. Needless to say, making that first impression a good one is crucial.
Moments of truth are directly impacted by the appearance of staff as well as that of the workplace, both of which are a direct representation of our organization. When we dress appropriately for the job and wear our name badges so that they are easily readable, we project professionalism to our customers. We not only create a good first impression, but we also reinforce our culture of quality through attention to personal appearance. The same principle applies to our healthcare setting. When we take pains to keep our workspace uncluttered and to pick up trash in hallways and public areas, we are sending a positive message to those who enter the doors of our facility for the first time. We should always take pride in how we present ourselves and in the facility itself. Doing so conveys respect for customers and their expectations.
You are in a car traveling at 20 m/s. An ambulance is behind you traveling 35 m/s in the same direction. What frequency do you hear if the siren has a frequency of 550 Hz?
Answers
Answer:
The frequency heard is 576.78 Hz
Explanation:
The Doppler effect is defined as the apparent frequency change of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave motion when the sender and receiver, or observer, move relative to each other.
This is what happens in the first part of this problem, where the sender is train A and the receiver is train B. They are both moving in opposite directions. In this case, where both are in motion, the frequency perceived by the receiver will increase when receiver and transmitter increase their separation distance and will decrease whenever the separation distance between them is reduced. The following expression is considered the general case of the Doppler effect:
[tex]f'=f*\frac{v+-vR}{v+-vE}[/tex]
Where:
f ', f: Frequency perceived by the receiver and frequency emitted by the issuer respectively. Its unit of measurement in the International System (S.I.) is the hertz (Hz), which is the inverse unit of the second (1 Hz = 1 s-1)
v: Velocity of propagation of the wave in the medium. It is constant and depends on the characteristics of the medium. In this case, the speed of sound in air is considered to be 343 m / s
vR, vE: Speed of the receiver and the emitter respectively. Its unit of measure in the S.I. is the m / s
±, ∓:
We will use the + sign:
In the numerator if the receiver approaches the emitter In the denominator if the emitter moves away from the receiverWe will use the sign -:
In the numerator if the receiver moves away from the emitter In the denominator if the emitter approaches the receiverIn this case you are in a car traveling at 20 m/s and an ambulance is behind you traveling 35 m/s in the same direction.
In this case the receiver, you in the car, moves away from the emitter, while the emitter, the ambulance, approaches the receiver behind you in the same direction. So the frequency is calculated by the expression:
[tex]f'=f*\frac{v-vR}{v-vE}[/tex]
Being:
f= 550 Hzv=343 m/svR= 20 m/svE= 35 m/sand replacing:
[tex]f'=550 Hz*\frac{343 m/s-20 m/s}{343 m/s-35 m/s}[/tex]
you get:
f'= 576.78 Hz
The frequency heard is 576.78 Hz
a car is traveling north on the interstate. They cover 645 miles in 9 hours. What is the car's average velocity ?
Answers
Answer:
71.6 mph
Explanation:
you would do 645 divided by 9 which would give you 71.6
Which law best describes this behavior of gases in the Sun?
Answers
Answer:
The extreme pressure from the weight of the gases that make up the Sun raises the temperature of the core enough for the nuclear reactions to take place, Which law best describes this behavior of gases in the Sun? A. Charles law.
Explanation:
if it is helpful....... plzz like and follow
A 5 kg object is moving downward at a velocity of 12 m/s and is
currently 2.6 meters above the ground.
calculate its kinetic energy
calculate its potential energy
calculate its mechanical energy
Answers
Answer:
the first one i think
Explanation:
Classify each substance as either a conductor or insulator.
A sample of mercury:
✔ conductor
A piece of glass:
✔ insulator
A rubber hose:
✔ insulator
A negatively ionized lithium paste:
✔ conductor
Answers
The correct classification of each substance is as follows:
A sample of mercury: conductorA piece of glass: insulatorA rubber hose: insulatorA negatively ionized lithium paste: conductorWhat are conductors and insulators?A conductor is a substance that can transmit electricity, heat, light or sound while an insulator is a substance that does not transmit heat, sound or electricity.
Conductors are usually metals while insulators are usually non-metals. Examples of conductors include;
IronAluminumCopperExamples of insulators include;
GlassPaperWoodSilkTherefore, the correct classification of each substance is as follows:
A sample of mercury: conductorA piece of glass: insulatorA rubber hose: insulatorA negatively ionized lithium paste: conductorLearn more about conduction at: https://brainly.com/question/18084972
#SPJ1
Answer:
Explanation:
E2020
The least penetrating form of radiation is
X rays
gamma radiation
ОООО
alpha radiation
beta radiation
Answers
Answer:
radio radiation........
Answer
C.( Alpha particles!
In a penalty kick, a soccer player kicks the ball from ground level with an initial velocity of .5.0 m/s,20.0^ above the horizontal . Assume that air resistance is negligible . What is the maximum height , y max of the soccer ball ?
A)0.51
B)3.2
C)3.7
D)8.6
What is the flight time of the soccer ball in the previous problem?
A)0.76 s
B)0.87 s
C) 1.3 s
D) 1.7 s
Answers
Carbon (C) is an element found in living organisms. How would carbon be classified in the hierarchy of organisms?
Answers
Answer:
Explanation:
A cell
Why does the moon appear to change its shape as seen from Earth
A.Different parts of the sunlit moon become visible as the moon revolves around the Earth
B.Different parts of the moon are lit as the moon rotates
C.The moon moves farther and then closer to Earth
D.The sun lights different parts of the moon during different seasons
Answers
Answer:
Explanation:
Why does the moon appear to change its shape as seen from Earth
Which experiment proved light was a wave?
A) Photoelectric effect
B) Double Slit
C) Compton Scattering
D Light was never proved to be a wave
Answers
Answer:
The answer is B) Double slit
(Cr(NH3).](Co(CN)6) is a coordination complex
compound. What is the percent composition of carbon in this
compound?
Answers
Answer:19.51%
Explanation:
From an apple tree 2 metres high, a 100g mass apple fell of the tree, what work did it do?
Answers
Answer:
W = 1.96 J
Explanation:
Given that,
The mass of an Apple, m = 100 g = 0.1 kg
It fell from 2 metres high tree.
We need to find the work done by it. The work done is given by :
[tex]W=mgh\\\\W=0.1\times 9.8\times 2\\W=1.96\ J[/tex]
So, the required work done is 1.96 J.
6. What is the resultant force on each car below? Remember TWO pieces of
information are needed.
7. What additional statement could we make about each car? Think about what key
words we could use
Answers
Explanation:
In first case, the forces on LHS and on RHS is the same i.e. 3 N. The force acting on the car is balanced force. As a result, the car will not move at all.
In second case,
Force on RHS = 2000 N
Force on LHS = -6000 N
Net force acting on it is given by :
F = 2000+(-6000)
= -4000 N
Hence, this is the required solution.