Answer:
The tension in the second string is 226.7 N.
Explanation:
Length is L, mass per unit length = m
T = 510 N
Let the tension in the second string is T'.
second harmonic of the first string = third harmonic of the second string
[tex]2 f = 3 f'\\\\2\sqrt{\frac{T}{m}} = 3 \sqrt {\frac{T'}{m}}\\\\4 T = 9 T'\\\\4\times 510 = 9 T'\\\\T' = 226.7 N[/tex]
A cylindrical container with a cross sectional area of 65.2 cm^2 holds a fluid of density 806 kg/m^3. At the bottom of the container the pressure is 116 kPa.
(a) What is the depth of the fluid?
(b) Find the pressure at the bottom of the container after an additional 2.05 X 10^-3 m^3 of this fluid is added to the container. Assume that no fluid spills out of the container.
The value of mass remains constant but weight changes place to place why
Explanation:
No matter where you are in the universe, your mass is always the same: mass is a measure of the amount of matter which makes up an object. Weight, however, changes because it is a measure of the force between an object and body on which an object resides (whether that body is the Earth, the Moon, Mars, et cetera).
Explanation:
Hence, weight of a body will change from one place to another place because the value of g is different in different places. For example, the value of g on moon is 1/6 times of the value of g on earth. As mass is independent of g , so it will not change from place to place.
190 students sit in an auditorium listening to a physics lecture. Because they are thinking hard, each is using 125 W of metabolic power, slightly more than they would use at rest. An air conditioner with a COP of 5.0 is being used to keep the room at a constant temperature. What minimum electric power must be used to operate the air conditioner?
Answer:
W = 4.75 KW
Explanation:
First, we will calculate the heat to be removed:
Q = (No. of students)(Metabolic Power of Each Student)
Q = (190)(125 W)
Q = 23750 W = 23.75 KW
Now the formula of COP is:
[tex]COP = \frac{Q}{W}\\\\W = \frac{Q}{COP}\\\\W = \frac{23.75\ KW}{5}\\\\[/tex]
W = 4.75 KW
A 0.500-kg block slides up a plane inclined at a 30° angle. If it slides 1.50 m before coming to rest while encountering a frictional force of 2 N, find (a) its acceleration, and (b) its initial velocity.
Two substances, M and N, have specific heats c and 2c. if heats Q and 4Q are supɔlied to Mand N, respectively, their changes in temperature become equal. If substance M has mass m, find the mass of substance N in terms of m
Answer:
If the mass of B is m and the temperature change is the same, the mass of B will be 2m.
Explanation:
Q = mcT
T = mc/Q
M = 4Q/2cT........... (1)
T = Q/mc
Plug this in equation 1.
M = 4Q/(2c × Q/mc) = 4Q ÷ 2Q/m = 4Q × m/2Q = 2m
During 57 seconds of use, 330 C of charge flow through a microwave oven. Compute the size of the electric current.
Answer:
5.78amps
Explanation:
Given data
Time t= 57 seconds
Charge Q= 330C
Current I= ??
The expression for the electric current is given as
Q= It
Substituting we have
330= I*57
I= 330/57
I=5.78 amps
Hence the current is 5.78amps
As it pulls itself up to a branch, a chimpanzee accelerates upward at 2.4 m/s2 at the instant it exerts a 260-N force downward on the branch.Find the magnitude of the force the chimpanzee exerts on the Earth.
Answer:
[tex]F=208.83N[/tex]
Explanation:
From the question we are told that:
Acceleration [tex]a=2.4m/s^2[/tex]
Force of Branch [tex]F=260N[/tex]
Generally the Newton's equation second law for Force is mathematically given by
[tex]ma=F-mg[/tex]
[tex]m=\frac{260}{2.4+9.8}[/tex]
[tex]m=21.31kg[/tex]
Therefore
[tex]F=mg[/tex]
[tex]F=(21.31)(9.8)[/tex]
[tex]F=208.83N[/tex]
How do you find the product of gamma decay?
Answer:
The mass and atomic numbers don't change
Explanation:
An excited atom relaxes to the ground state emitting a photon...called a gamma ray.
The answer is that the mass and atomic numbers don't change.
In gamma decay, the product refers to the nucleus resulting from the emission of a gamma ray. Gamma decay occurs when an excited atomic nucleus releases excess energy in the form of a high-energy photon called a gamma ray.
To find the product of gamma decay, you need to identify the nucleus before and after the decay process. The product nucleus is determined by the parent nucleus that undergoes gamma decay.
During gamma decay, the number of protons and neutrons in the nucleus remains unchanged. Therefore, the identity of the element remains the same, but the energy state of the nucleus is altered.
The product nucleus is typically represented by the same chemical symbol as the parent nucleus, followed by a superscript indicating the mass number (total number of protons and neutrons) and a subscript indicating the atomic number (number of protons).
For example, if a parent nucleus with an atomic number of Z and a mass number of A undergoes gamma decay, the product nucleus will have the same atomic number Z and mass number A.
It's important to note that gamma decay does not involve the emission or absorption of any particles, only the release of electromagnetic radiation (gamma ray).
Thus, the product nucleus remains unchanged in terms of atomic number and mass number.
Know more about gamma decay:
https://brainly.com/question/16039775
#SPJ4
A proton is released from rest at the positive plate of a parallel-plate capacitor. It crosses the capacitor and reaches the negative plate with a speed of 54000 m/s. The experiment is repeated with a He+ ion (charge e, mass 4 u).What is the ion's speed at the negative plate?
~~~~NEED HELP ASAP~~~~
Block A slides into block B along a frictionless surface. They are moving in the direction from left o the right.
Block A= 3kg
Block B= 4kg
Block A velocity before collision =30m/s.
Block B velocity before collision = 15 m/s
The velocity of block B after the collision is 20m/s.
a.) What is the velocity of block A after collision?
b.) Is the collision elastic? Show work to explain answer why or why not.
Answer:
Block A velocity is 23.33 m/s and the collission is not elastic.
Explanation:
a) m1v1 + m2v2 = m1v1' + m2v2'
Plug in givens
90+60=3v1'+80
solve for v1'= 23.33m/s
b) Find the initial and final kinetic energy of Block B
Ki= 1/2(4)(15)^2 + 1/2(3)(30)^2 = 1800 J
Kf= 1/2(4)(20)^2 + 1/2(3)*(23.33)^2= 1616.433J
Since Ki does not equal Kf the collision is not elastic
A 70.0-kg person throws a 0.0430-kg snowball forward with a ground speed of 32.0 m/s. A second person, with a mass of 58.5 kg, catches the snowball. Both people are on skates. The first person is initially moving forward with a speed of 3.30 m/s, and the second person is initially at rest. What are the velocities of the two people after the snowball is exchanged
Answer:
The velocities of the skaters are [tex]v_{1} = 3.280\,\frac{m}{s}[/tex] and [tex]v_{2} = 0.024\,\frac{m}{s}[/tex], respectively.
Explanation:
Each skater is not under the influence of external forces during process, so that Principle of Momentum Conservation can be used on each skater:
First skater
[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex] (1)
Second skater
[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex] (2)
Where:
[tex]m_{1}[/tex] - Mass of the first skater, in kilograms.
[tex]m_{2}[/tex] - Mass of the second skater, in kilograms.
[tex]v_{1,o}[/tex] - Initial velocity of the first skater, in meters per second.
[tex]v_{1}[/tex] - Final velocity of the first skater, in meters per second.
[tex]v_{b}[/tex] - Launch velocity of the meter, in meters per second.
[tex]v_{2}[/tex] - Final velocity of the second skater, in meters per second.
If we know that [tex]m_{1} = 70\,kg[/tex], [tex]m_{b} = 0.043\,kg[/tex], [tex]v_{b} = 32\,\frac{m}{s}[/tex], [tex]m_{2} = 58.5\,kg[/tex] and [tex]v_{1,o} = 3.30\,\frac{m}{s}[/tex], then the velocities of the two people after the snowball is exchanged is:
By (1):
[tex]m_{1} \cdot v_{1, o} = m_{1} \cdot v_{1} + m_{b}\cdot v_{b}[/tex]
[tex]m_{1}\cdot v_{1,o} - m_{b}\cdot v_{b} = m_{1}\cdot v_{1}[/tex]
[tex]v_{1} = v_{1,o} - \left(\frac{m_{b}}{m_{1}} \right)\cdot v_{b}[/tex]
[tex]v_{1} = 3.30\,\frac{m}{s} - \left(\frac{0.043\,kg}{70\,kg}\right)\cdot \left(32\,\frac{m}{s} \right)[/tex]
[tex]v_{1} = 3.280\,\frac{m}{s}[/tex]
By (2):
[tex]m_{b}\cdot v_{b} = (m_{2}+m_{b})\cdot v_{2}[/tex]
[tex]v_{2} = \frac{m_{b}\cdot v_{b}}{m_{2}+m_{b}}[/tex]
[tex]v_{2} = \frac{(0.043\,kg)\cdot \left(32\,\frac{m}{s} \right)}{58.5\,kg + 0.043\,kg}[/tex]
[tex]v_{2} = 0.024\,\frac{m}{s}[/tex]
A tire is filled with air at 22oC to a gauge pressure of 240 kPa. After driving for some time, if the temperature of air inside the tire is 45oC, what fraction of the original volume of air must be removed to maintain the pressure at 240 kPa?
Answer:
7.8% of the original volume.
Explanation:
From the given information:
Temperature [tex]T_1[/tex] = 22° C = 273 + 22 = 295° C
Pressure [tex]P_1[/tex] = 240 kPa
Temperature [tex]T_2[/tex] = 45° C
At initial temperature and pressure:
Using the ideal gas equation:
[tex]P_1V_1 =nRT_1[/tex]
making V_1 (initial volume) the subject:
[tex]V_1 = \dfrac{nRT_1}{P_1}[/tex]
[tex]V_1 = \dfrac{nR*295}{240}[/tex]
Provided the pressure maintained its rate at 240 kPa, when the temperature reached 45° C, then:
the final volume [tex]V_2[/tex] can be computed as:
[tex]V_2 = \dfrac{nR*318}{240}[/tex]
Now, the change in the volume ΔV = V₂ - V₁
[tex]\Delta V = \dfrac{nR*318}{240}- \dfrac{nR*295}{240}[/tex]
[tex]\Delta V = \dfrac{23nR}{240}[/tex]
∴
The required fraction of the volume of air to keep up the pressure at (240) kPa can be computed as:
[tex]= \dfrac{\dfrac{23nR}{240}}{ \dfrac{295nR}{240}}[/tex]
[tex]= {\dfrac{23nR}{240}} \times { \dfrac{240}{295nR}}[/tex]
[tex]= 0.078[/tex]
= 7.8% of the original volume.
An object with mass m is located halfway between an object of mass M and an object of mass 3M that are separated by a distance d. What is the magnitude of the force on the object with mass m?A) 8GMm/d^2B) GMm/(4d^2)C) 4GMm/d^2D) GMm/(2d^2)E) 3GMm/2d^2
Answer:
A) 8GMm/d^2
Explanation:
We are given that
[tex]m_1=M[/tex]
[tex]m_2=3M[/tex]
[tex]m_3=m[/tex]
Distance between m1 and m2=d
Distance of object of mass m from m1 and m2=d/2
Gravitational force formula
[tex]F=\frac{Gm_1m_2}{r^2}[/tex]
Using the formula
Force acting between m and M is given by
[tex]F_1=\frac{GmM}{d^2/4}[/tex]
Force acting between m and 3M is given by
[tex]F_2=\frac{Gm(3M)}{d^2/4}[/tex]
Now, net force acting on object of mass is given by
[tex]F=F_2-F_1[/tex]
[tex]F=\frac{Gm(3M)}{d^2/4}-\frac{GmM}{d^2/4}[/tex]
[tex]F=\frac{12GmM}{d^2}-\frac{4GmM}{d^2}[/tex]
[tex]F=\frac{12GmM-4GmM}{d^2}[/tex]
[tex]F=\frac{8GmM}{d^2}[/tex]
Hence, the magnitude of the force on the object with mass m=[tex]\frac{8GmM}{d^2}[/tex]
Option A is correct.
A rope, under a tension of 221 N and fixed at both ends, oscillates in a second-harmonic standing wave pattern. The displacement of the rope is given by y = (0.10 m)(sin πx/2) sin 12πt, where x = 0 at one end of the rope, x is in meters, and t is in seconds.
What are:
a. the length of the rope.
b. the speed of the waves on the rope
c. the mass of the rope
d. If the rope oscillates in a third-harmonic standing wave pattern, what will be the period of oscillation.
Answer:
sup qwertyasdfghjk
Explanation:
A 10-cm-long spring is attached to the ceiling. When a 2.0 kg mass is hung from it, the spring stretches to a length of 15 cm.What is the spring constant k?How long is the spring when a 4.0 kg mass is suspended from it?
As the spring is stretched, it exerts an upward restoring force f. At maximum extension, Newton's second law gives
∑ F = f - mg = 0 ==> f = (2.0 kg) (9.8 m/s²) = 19.6 N
By Hooke's law, if k is the spring constant, then
f = kx ==> k = f/x = (19.6 N) / (0.15 m) ≈ 130 N/m
A 4.0 kg mass would cause the spring to exert a force of
f = (4.0 kg) (9.8 m/s²) = 39.2 N
which would result in the spring stretching a distance x such that
39.2 N = (130 N/m) x ==> x = (39.2 N) / (130 N/m) ≈ 0.30 m ≈ 30 cm
In 2009 Usain Bolt set the world record time by running 100 meters in 9.58 s. Assume that during this race he ran in a straight line with constant acceleration a. What would be the required constant acceleration a
In 2009 Usain Bolt set the world record time by running 100 meters in 9.58 seconds, assuming that he ran this race with constant acceleration, then the required constant acceleration would have been
What are the three equations of motion?There are three equations of motion given by Newton
v = u + at
S = ut + 1/2×a×t²
v² - u² = 2×a×s
By using the second equation of motion given by Newton,
S = ut + 1/2at²
100= 0 + 0.5*a*9.58²
a = 2.17 meters / second²
Thus,the required constant acceleration of Usain Bolt would have been 2.17 meters / second².
To learn more about equations of motion here, refer to the link;
brainly.com/question/5955789
#SPJ2
Investigators measure the size of fog droplets using the diffraction of light. A camera records the diffraction pattern on a screen as the droplets pass in front of a laser, and a measurement of the size of the central maximum gives the droplet size. In one test, a 690 nm laser creates a pattern on a screen 30 cm from the droplets. If the central maximum of the pattern is 0.24 cm in diameter, how large is the droplet?
Answer:
the diameter of the droplet is 0.021045 cm or 2.1 × 10⁻² cm
Explanation:
Given the data in the question;
Diameter of bright central maxima;
⇒ 2 × ( 1.22 × (λD/d) ) ⇒ 2.44( λD/d )
where D is the distance from the the droplet to the screen ( 30 cm )
d is the diameter of the droplet
λ is the wavelength of light ( 690 nm = 690 × 10⁻⁷ cm )
since the central maximum of the pattern is 0.24 cm in diameter,
we substitute
0.24 cm = 2.44( ( 690 × 10⁻⁷ cm × 30 cm ) / d )
solve for d
d = 2.44( ( 690 × 10⁻⁷ cm × 30 cm ) / 0.24 cm
d = 0.0050508 cm² / 0.24 cm
d = 0.021045 cm or 2.1 × 10⁻² cm
Therefore, the diameter of the droplet is 0.021045 cm or 2.1 × 10⁻² cm
I need help on this physics problem.
Answer:
the speed of the nerve impulse in miles per hour is 201.59 mi/hr
Explanation:
Given;
the speed of the nerve impulse, v = 90.1 m/s
To convert this speed in meters per second to miles per hour, we use the following method;
1,609 meter = 1 mile
3,600 s = 1 hour
[tex]v(mi/h) = 90.1 \ \frac{m}{s} \times \frac{1 \ mile}{1,609 \ m} \times \frac{3,600 \ s}{1 \ hour} = (\frac{90.1 \times 3,600}{1,609} )\frac{mi}{hr} = 201.59 \ mi/hr[/tex]
Therefore, the speed of the nerve impulse in miles per hour is 201.59 mi/hr
MCQ
................
Answer:
I think it would be (-7 C )..
PLEASE HELP ME WITH THIS ONE QUESTION
The half-life of Barium-139 is 4.96 x 10^3 seconds. A sample contains 3.21 x 10^17 nuclei. What is the decay constant for this decay?
Explanation:
hope this will help u
mark me as brinalist or vote me
Thankyou
A wheel rotates about a fixed axis with a constant angular acceleration of 3.3 rad/s2. The diameter of the wheel is 21 cm. What is the linear speed (in m/s) of a point on the rim of this wheel at an instant when that point has a total linear acceleration with a magnitude of 1.7 m/s2
Answer:
The the linear speed (in m/s) of a point on the rim of this wheel at an instant=0.418 m/s
Explanation:
We are given that
Angular acceleration, [tex]\alpha=3.3 rad/s^2[/tex]
Diameter of the wheel, d=21 cm
Radius of wheel, [tex]r=\frac{d}{2}=\frac{21}{2}[/tex] cm
Radius of wheel, [tex]r=\frac{21\times 10^{-2}}{2} m[/tex]
1m=100 cm
Magnitude of total linear acceleration, a=[tex]1.7 m/s^2[/tex]
We have to find the linear speed of a at an instant when that point has a total linear acceleration with a magnitude of 1.7 m/s2.
Tangential acceleration,[tex]a_t=\alpha r[/tex]
[tex]a_t=3.3\times \frac{21\times 10^{-2}}{2}[/tex]
[tex]a_t=34.65\times 10^{-2}m/s^2[/tex]
Radial acceleration,[tex]a_r=\frac{v^2}{r}[/tex]
We know that
[tex]a=\sqrt{a^2_t+a^2_r}[/tex]
Using the formula
[tex]1.7=\sqrt{(34.65\times 10^{-2})^2+(\frac{v^2}{r})^2}[/tex]
Squaring on both sides
we get
[tex]2.89=1200.6225\times 10^{-4}+\frac{v^4}{r^2}[/tex]
[tex]\frac{v^4}{r^2}=2.89-1200.6225\times 10^{-4}[/tex]
[tex]v^4=r^2\times 2.7699[/tex]
[tex]v^4=(10.5\times 10^{-2})^2\times 2.7699[/tex]
[tex]v=((10.5\times 10^{-2})^2\times 2.7699)^{\frac{1}{4}}[/tex]
[tex]v=0.418 m/s[/tex]
Hence, the the linear speed (in m/s) of a point on the rim of this wheel at an instant=0.418 m/s
why kg is a fundamental unit?
This above answer helps a lot.
If an object of a constant mass experiences a constant net force, it will have a constant what?
Explanation:
hope it helps !!!!!!!!!!!!!
If an object of a constant mass experiences a constant net force, it will have a constant acceleration.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force. A spring balance can be used to calculate the Force. The Newton is the SI unit of force.
According to Newton's second law of motion:
Applied force = mass × acceleration.
Hence, if an object of a constant mass experiences a constant net force, it will have a constant acceleration.
Learn more about force here:
https://brainly.com/question/26115859
#SPJ6
In a television set the power needed to operate the picture tube comes from the secondary of a transformer. The primary of the transformer is connected to a 120-V receptacle on a wall. The picture tube of the television set uses 76 W, and there is 5.5 mA of current in the secondary coil of the transformer to which the tube is connected. Find the turns ratio Ns/Np of the transformer.
Ns/Np = ______.
Answer:
c) N_s / N_p = 115.15
Explanation:
Let's look for the voltage in the secondary, they do not indicate the power dissipated
P = V_s i
V_s = P / i
V_s = 76 / 5.5 10⁻³
V_s = 13.818 10³ V
the relationship between the primary and secondary of a transformer is
[tex]\frac{V_p}{N_p} = \frac{V_s}{N_s}[/tex]
[tex]\frac{N_s}{N_p} = \frac{V_s}{V_p}[/tex]
Ns / Np = 13,818 10³ /120
N_s / N_p = 115.15
Put the following energy sublevels in order from least to greatest energy
A None of these
BIS. 25. 20, 35, 38, 34, 45, 46, 4d. 48
Cisas is4s, 20, 30, 40, 30, 40, 4f
D. is 25, 20, 35, 3p. 45, 3d, 4p, 40, 48
In a
DC source, which has more cuwent?
(i)R L Circuit
(ii)RC Circuit (series)
(iii)LC Cirenit (series)
(iv)RLC Circuit (series)
Answer:
Answer is LC Cirenit (seres)
A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).
a. Plot the data as engineering stress versus engineering strain.
b. Compute the modulus of elasticity.
c. Determine the yield strength at a strain offset of 0.002.
d. Determine the tensile strength of this alloy.
e. What is the approximate ductility, in percent elongation?
f. Compute the strain energy density up to yielding (modulus of resilience).
( Load in N Load in lb Length in mm Length in in. 2.000 2.002 2.004 2.006 2.008 2.010 2.020 2.040 2.080 2.120 2.160 2.200 2.240 2.270 2.300 2.330 Fracture 50.800 7330 15,100 3400 23,100 5200 30,400 6850 34,400 7750 38,400 8650 41,3009300 44,800 10,100 46,200 10,400 53, 47,300 10,650 54.864 47,500 10,700 55.880 46,100 10,400 44,800 10,100 42,600 9600 3,400 8200 Fracture Fracture Fracture 50.851 50.902 50.952 51.003 51.054 1650 51.308 51.816 52.832 848 56.896 57.658 58.420 59.182
Answer:
A cylindrical specimen of aluminum having a diameter of 0.505 in. (12.8 mm) and a gauge length of 2.0 in. (50.8 mm) is pulled in tension. Use the load-elongation characteristics tabulated below to complete parts (a) through (f).
During typical urination, a man releases about 400 mL of urine in about 30 seconds through the urethra, which we can model as a tube 4 mm in diameter and 20 cm long. Assume that urine has the same density as water, and that viscosity can be ignored for this flow.a. What is the flow speed in the urethra?b. If we assume that the fluid is released at the same height as the bladder and that the fluid is at rest in the bladder (a reasonable approximation), what bladder pressure would be necessary to produce this flow? (In fact, there are additional factors that require additional pressure; the actual pressure is higher than this.)
Answer:
Explanation:
Given:
volume of urine discharged, [tex]V=400~mL=0.4~L=4\times 10^{-4}~m^3[/tex]
time taken for the discharge, [tex]t=30~s[/tex]
diameter of cylindrical urethra, [tex]d=4\times10^{-3}~m[/tex]
length of cylindrical urethra, [tex]l=0.2~m[/tex]
density of urine, [tex]\rho=1000~kg/m^3[/tex]
a)
we have volume flow rate Q:
[tex]Q=A.v[/tex] & [tex]Q=\frac{V}{t}[/tex]
where:
[tex]A=[/tex] cross-sectional area of urethra
[tex]v=[/tex] velocity of flow
[tex]A.v=\frac{V}{t}[/tex]
[tex]\frac{\pi d^2}{4}\times v=\frac{4\times 10^{-4}}{30}[/tex]
[tex]v=\frac{4\times4\times 10^{-4}}{30\times \pi (4\times 10^{-3})^2}[/tex]
[tex]v=1.06~m/s[/tex]
b)
The pressure required when the fluid is released at the same height as the bladder and that the fluid is at rest in the bladder:
[tex]P=\rho.g.l[/tex]
[tex]P=1000\times 9.8\times 0.2[/tex]
[tex]P=1960~Pa[/tex]
10 A turning pork creates sound cares
with
Frequency of 170Hz: To the
speed of sound in is in 340mls
calculate the wave
wave length
of
in air is
the sound wales.
Answer:
2m
Explanation:
wavelength=speed/frequency
=340/170
=2m
suppose a car of 1200kg is moving with a velocity of 40km/hr therefore its kinetic energy is not zero. 1. explain briefly what happens to its kinetic energy when the driver applies the breaks and the car stops
Answer:
Explanation:
For starters begin with a warning not to touch the brake drums. All of the KE is transferred to the brake drums. The result is a large rise in temperature. Heat. If you press hard on the brakes, rubber is left on the road and there is heat involved in that too.
Answer:
KInetic energy reduces.
Explanation:
Application of breaks reduces velocity. Reduction of velocity constitutes velocity reduction.
For more help contact +1 (304) 223-3136