___ tubing is commonly used in hydraulic systems. Carbon Steel. _____ fittings are typically used in hydraulic equipment when attaching tubing to a hose.

Answers

Answer 1

Flared tubing is commonly used in hydraulic systems. Carbon Steel fittings are typically used in hydraulic equipment when attaching tubing to a hose.

Liquid fluid power is used by hydraulic machines to do operations. Heavy-duty construction vehicles are a typical illustration. Hydraulic fluid is pumped to numerous hydraulic motors and hydraulic cylinders located all around the machine in this sort of machine and is pressured in accordance with the resistance present. Control valves direct or automate the distribution of the fluid through hoses, tubes, or pipes.

Pascal's law, which asserts that any pressure applied to a fluid inside a closed system would transmit that pressure equally everywhere and in all directions, is the foundation of hydraulic systems, just like pneumatic systems. An incompressible liquid, as opposed to a compressible gas, serves as the fluid in a hydraulic system.

Want to know more about hydraulic systems visit the link which is given below;

https://brainly.com/question/19133245

#SPJ4


Related Questions

the member with a cross-section area of a is subjected to axial loading p as shown. what is the maximum shearing stress and its corresponding plane?

Answers

To determine the maximum shearing stress and its corresponding plane, you would need to know the value of the axial load p, and the cross-sectional area A of the member.

What is shearing stress?

Shearing stress is a type of stress that occurs in a material when the applied forces generate sliding or slippage along the parallel planes within the material. It is a measure of the force per unit area that is resisting this sliding or shearing.

The maximum shearing stress in a member subjected to axial loading is given by the formula:

τ_max = p / (2A)

where p is the axial load, and A is the cross-sectional area of the member. The plane where the maximum shearing stress occurs is perpendicular to the plane of the cross section.

It is important to note that the maximum shearing stress occurs at 45 degrees to the axis of the member, at the point where the stress is acting at right angles to both the longitudinal and radial axes of the cross section.

Therefore, to determine the maximum shearing stress and its corresponding plane, you would need to know the value of the axial load p, and the cross-sectional area A of the member.

To learn more about shearing stress:

https://brainly.com/question/20630976

#SPJ4

A water tank located at a depth of 8 m from ground level is half full of water. This water is pumped up by a water pump in the basement and drilled at 2 mis'' access. 10 minutes until the water in the tank is finished 0: The power of the motor is 1 kW and the cross-sectional area of ​​the tank is 2m. * ii) Determine the useful work (output) done by the equation /x, (ii) Find the energy required for friction, (iii) Find the efficiency of the pump. (iv) Suggest a way to increase the value of (iii) above. (Density of water = 1000 kgm ]​

Answers

The output by the equation and energy required for friction is 160,000 J. Efficiency is 0.267 or 26.7% and this efficiency can be improved by friction reduction.

How to calculate output, friction and efficiency?

The useful work done by the pump can be calculated as the product of the weight of the water pumped and the height it is lifted. The weight of the water in the tank can be calculated as the density of water times the volume of water in the tank. The volume of water in the tank is half the total volume of the tank, which can be calculated as the cross-sectional area of the tank times its height (8 m). So the weight of the water is:

Volume = cross-sectional area x height = 2 m x 8 m = 16 m³

Weight = Volume x density = 16 m³ x 1000 kg/m³ = 16,000 kg

Useful work = Weight x height = 16,000 kg x 10 m = 160,000 J

The energy required for friction can be estimated as a percentage of the useful work. This percentage depends on the design of the pump, the viscosity of the water and other factors. Assuming a friction loss of 10%, the energy required for friction can be calculated as:

Energy required for friction = 0.1 x 160,000 J = 16,000 J

The efficiency of the pump can be calculated as the ratio of the useful work done by the pump to the energy input. The energy input can be calculated as the product of the power of the motor (1 kW) and the time it is run (10 minutes, or 600 seconds). So the efficiency can be calculated as: Energy input = Power * time = 1 kW x 600 sec = 600,000 J

Efficiency = Useful work / Energy input = 160,000 J / 600,000 J = 0.267 or 26.7%

The efficiency of the pump can be increased by reducing the friction loss, improving the design of the pump to reduce energy losses, or increasing the power of the motor. Another option is to increase the height the water is lifted, as the useful work done by the pump is directly proportional to the height the water is lifted.

Learn more on output and friction here: https://brainly.com/question/12311388

#SPJ1

state what the gradient of a graph of kinetic friction vs normal force represents

Answers

If we graph kinetic friction force vs. weight, we would find a straight line with a slope of 0.5. The slope of this graph represents the coefficient of friction.

How much work does gravity do on a 0.110-kg ball falling from a height of 19.0 m? (Neglect air resistance.)

Answers

Answer = 20.5 J


The work done on the ball as it falls through the air can be found by using the gravitational potential energy (GPE) equation. You use this equation because work is done on the ball to move the ball from one place to another due to gravity:

GPE = Mass x Gravitational field strength x Height


The values given are:
Mass = 0.11 kg
Height = 19 m
Gravitational field strength (gravity) = 9.81 m/s


Substitute the values into the GPE equation:

GPE = 0.11 x 9.81 x 19

GPE = 20.5 J

Non skull bones of the axial skeleton

Answers

Answer:

humerus, phalanges, carpals, etc

Explanation:

these examples are non skull bones of the axial skeleton

Which diagram best shows what happens when light passes through a magnifying glass?​

Answers

A magnifying glass is a simple optical device that uses a convex lens to produce a magnified image of an object.

What is a magnifying glass?

When a magnifying glass is held close to an object, the lens refracts the light that is reflected off the object and causes it to converge or come together at a point. This point is called the focal point, and it is where the magnified image is formed. The image appears larger and closer than the actual object because it is formed by the light that has been bent and converged by the lens.

The magnification produced by a magnifying glass depends on the power of the lens, which is determined by its focal length.

Learn more about magnifying glass:https://brainly.com/question/14961076

#SPJ1

If a waterfall and a dam have the same height,
which one would have the most kinetic energy?
Explain why.

Answers

ANSWER -

If a waterfall and a dam have the same height, the waterfall would have more kinetic energy. This is because kinetic energy depends on both height (potential energy) and velocity. A waterfall, being a free-falling stream of water, has a greater velocity than a dam, where the water is held back by a barrier. The greater velocity of the waterfall means that it has a greater kinetic energy.

Kinetic energy (KE) = 0.5 * mass * velocity^2, where mass is the mass of the water and velocity is its speed. As velocity increases, so does kinetic energy.

An Objects moves in a Circular Path of radius 0.5m worth a Speed of 0.5m/s what is its anglur velocity​

Answers

Answer:

w=0.25rad/s

Explanation:

w=vr

where v=speed in m/s,r=0.5 in m,w=rad/s

w=0.5×0.5

w=0.25rad/s

a gps satellite orbits at an altitude of 20,200 km above the surface of earth. what is the speed of the satellite? (recall that re

Answers

The speed of the GPS satellite in orbit is approximately 3.87 km/s.

What is the GPS satellite's orbital speed?

MEO, or medium earth orbit, is the term used to describe orbits of this altitude.

We can use the formula for the speed of an object in circular orbit:

v = √(GM/r)

where v is the speed of the satellite, G is the gravitational constant, M is the mass of the Earth, and r is the distance between the center of the Earth and the satellite (which is the sum of the radius of the Earth and the altitude of the satellite).

The mass of the Earth is approximately 5.97 x 10²⁴kg, the radius of the Earth is approximately 6,371 km, and the altitude of the GPS satellite is 20,200 km.

Converting the units to meters, we have:

M = 5.97 x 10²⁴ kg

r = (6,371 km + 20,200 km) x 1000 m/km

= 26,371,000 m

G = 6.674 x 10⁻¹¹ N·m²/kg²

[tex]\mathrm{v = \sqrt{\dfrac{(6.674 \times 10^{-11} N\cdot m^2/kg^2) \times (5.97 x 10^24 kg)}{(26,371,000 m)} } }[/tex]

= 3.87 km/s

Therefore, the speed of the GPS satellite in orbit is approximately 3.87 km/s.

To know more about satellites visit:-

brainly.com/question/10846004

#SPJ4

the following questions refer to the below molecules: (a) co2 (b) h2o (c) ch4 (d) c2h4 (e) ph3 question the molecule with the largest dipole moment

Answers

The CH4 molecule will have the biggest dipole moment. The symmetric of the molecules is established using the dipole moment.

A dipole moment is defined.

The size of the charge Q at each end of something like the molecules dipole times the space r seen between charges gives rise to the dipole moment (), which is a measure representing net molecular polarity. We can learn about a molecule's charge separation from its dipole moments.

What is the water dipole moment?

Its anisotropy has been calculated experimentally to be 1.855 D for a shallow groundwater monomers (1) An individual water molecule's dipole moment is known to be greatly increased in water clustered and cell contents due to polarization and molecular orbitals effects.

To know more about dipole moment visit:

brainly.com/question/14140953

#SPJ4

The molecule with the largest dipole moment (a) co2 (b) h2o (c) ch4 (d) c2h4 (e) ph3

In the schematically drawn circuit shown below, a light bulb is connected in series with a resistor. What is the total resistance in the circuit?
A) 90 ohms
B) 80 ohms
C) 100 ohms
D) 4 ohms

Answers

Answer:

100 ohms

Explanation:

the bulb is just a resistor that gets hot and emits light.... series circuit resistance just add together... 10 + 90 = 100 ohms

1kg of air at 1.02 bar , 20°c is compressed reversibly according to a law PV^1.3 = C, to a pressure of 5.5 bar. calculate the work done on the air and the heat supplied during compression.​

Answers

The heat supplied during compression is 432.26 K and the work done on the air is -3.859 KJ/kg

To find the compression temperature use the formula:

                                      P₁T₁= P₂T₂

To answer this question, we can use the following formula of work:

                                 W = mR (T₁ - T₂)/η - 1

now given,

mass: m = 1 kg

Law PV^1.3 : η = 1.3 (P¹°³)

initial pressure: P₁ = 1.02 bar,

initial temperature: T₁ = 20 + 273 = 293 K

final pressure: P₂ = 5.5 bar

final temperature: T₂ = ?

work: W = ?

Putting the given values ​​in the above equation, we get,

Temperature:

P₁T₁ = P₂T₂

T₂ = P₁T₁/P₂

T₂ = (5.5/1.02)0.3/1.3 × 293

T₂= (5.392)0.2308 × 293

T₂ = 1.4753 x 293

T₂ = 432.26 K.

So, the heat supplied during compression is 432.26 K.

Work:

W = mR (T₁ - T₂)/η - 1   → R = 8.314 J/Kmol

W = 1(8.314)(293 - 432.26)/1.3 - 1

W = 8.314(-139.26)/0.3

W = -1157.8/0.3

W = -3859.3 J/kg

W = -3.859 KJ/kg

So, the work done on the air is -3.859 KJ/kg

Learn more about the heat of compression at https://brainly.com/question/16988731.

#SPJ1

Identify the FALSE statement. Differentiation of large planetesimals and protoplanets:
is the process by which these bodies develop internal layering.
began with heating up component materials within these bodies.
was caused by heat created by the transformation of kinetic energy from collisions into thermal energy.
was inhibited if radioactive elements were present because their decay required heat input from the surroundings.
resulted in a central ball of iron alloy (the core) and an outer shell of lighter rocky materials (the mantle.)

Answers

The false statement is D: "was inhibited if radioactive elements were present because their decay required heat input from the surroundings."

This is false because radioactive elements can provide heat within the planetesimals and protoplanets, helping to drive differentiation by releasing heat from their decay. This heat can cause melting, which can lead to the differentiation of these bodies into internal layering, with a central ball of iron alloy (the core) and an outer shell of lighter rocky materials (the mantle).

You can learn more about radioactive elements at

https://brainly.com/question/29331998

#SPJ4

A merry-go-round is spinning in a circle at a constant speed. A child is 4 meters away from the center of the merry-go-round and experiences a centripetal acceleration of 6 m/s^2. What is the tangential velocity of the child?

A.) 1.5 m/s
B.) 24.0 m/s
C.) 9.1 m/s
D.) 4.9 m/s

Answers

The velocity is 4.9 m/s.

What is the centripetal acceleration?

Centripetal acceleration is the acceleration that acts towards the center of a circular path and is required to maintain an object in circular motion. It is defined as the rate of change of velocity of an object moving in a circular path.

The formula for centripetal acceleration can be expressed as:

a_c = v^2 / r

Given that;

a = v^2/r

a = acceleration

v = tangential velocity

r = radius

Thus;

v = √ar

v = (6 * 4)^1/2

v = 4.9 m/s

Learn more about velocity:https://brainly.com/question/18084516

#SPJ1

I don't know what to put here is there a formula to find the period?

Answers

The period of the oscillation is obtained by dividing the time with the number of oscillation.

What is the period of oscillation?

The period of oscillation is the time taken by a repeating periodic motion to complete one full cycle. It is a measure of the time it takes for an object in a repeating motion to return to its original position.

The period of an oscillation is usually denoted by the symbol T and is usually expressed in units of seconds

The period for the different run is calculated as follows;

T = t / n

where;

t is the time n is the number of oscillation = 10

Run 1 , T = 14.22/10 = 1.422 seconds

Run 2, T = 14.18 / 10 = 1.418 s

Run 3, T = 14.15 / 10 = 1.415 s

Run 4, T = 14.28 / 10 = 1.428 s

Run 5, T = 14.33 / 10 = 1.433 s

Learn more about period of oscillation here: https://brainly.com/question/20070798

#SPJ1

I’m not sure what the answers to these questions are for this sheet can u help?

Answers

Answer:

Explanation:

b.  helmet is aerodynamic; and he is leaning down, which reduces his surface area

c.  open parachute exposes more surface area to the air, which increases the drag

9.  A and D will float because density is less than 1.0

When he pushes the object down, then lets it go, it bobs back up because of the upward force (upthrust) of the water acting on the object.

yvette and zack are driving down the freeway side by side with their windows rolled down. Zack wants to toss his physics book out the window and have it land on yvette's front seat. should he direct his throw outward and toward the front of the car (throw 1), straight outward (throw 2), or outward and toward the back if the car (throw 3)? Explain?

Answers

If Zack wants to toss his physics book out the window and have it land on Yvette's front seat, he should throw straight outward (throw 2).

Given that Yvette and Zack are both moving at the same speed, their relative velocities are zero. When a book is thrown, its component of velocity in the car's motion direction is equal to that of the car.

At the time of the throw, the book will be moving at the same speed as the car. Yvette's vehicle travels at the same speed; from the viewpoint of the book, both vehicles are immobile. This indicates that the book only needs to proceed directly to Yvette's front seat. Simply slide the book to Yvette's front seat from here.

Learn more about velocity here: https://brainly.com/question/30391003

#SPJ4

True/False the four principle types of space our text names are: deep space, flat space, splitspace and ambiguous space

Answers

The given statement '' the four principal types of space our text names are: deep space, flat space, split space, and ambiguous space'' is false as the four principal types of space our text names are: atmospheric space, void space, domestic space, and liminal space.

Atmospheric space is the space between objects, where the environment can affect the objects in it. Void space is the empty space that can be found in a room or an area, but can also be found in one’s mind.

Domestic space is the space we create at home, and it is a space that reflects our identity and emotions. Finally, liminal space is a space between two states, where something is neither this nor that and can be seen as a threshold.

All of these spaces are integral to understanding how humans interact with the world, and they all contribute to the overall experience of living.

For more questions like Space click the link below:

https://brainly.com/question/28257984

#SPJ4

A boat is docked on the southern shore of a swiftly moving river that is 259.0 m wide. The river flows from east to west with a speed of 4.00 m/s relative to the shore. There is a dock located upstream on the northern side of the river at an angle of 57.0∘
relative to the shore (i.e. north of east). The boat is able to travel at a speed of 6.50 m/s relative to the water.

If the boat travels directly to the dock on the northern shore at a constant speed, how long does it take to get there?

Answers

It will take the boat 47.35 seconds to get to the dock on the northern shore.

What is relative velocity?

The velocity of an object in relation to another object or observer is defined as relative velocity. The time rate of change of one object's relative position with respect to another object is defined as relative velocity.

We can start by using vector addition to find the velocity of the boat relative to the shore.

The velocity of the boat relative to the water is 6.50 m/s, and the velocity of the water relative to the shore is 4.00 m/s,

Let the boat's relative velocity to shore is v(bs)

water relative velocity  to shore is v(ws)

boat's relative velocity to water is v(bw)

So: v(bs) = √(v(bw)² + v(ws)² - 2 × v(bw) × v(ws) × cos(57.0°))

Plugging in the known values, we get:

v(bs) = √(6.50² + 4.00² - 2 × 6.50 × 4.00 × cos(57.0°)) = 5.47 m/s

Next, we can use this velocity to find the time it takes for the boat to cross the river:

t = d / v(bs) = 259.0 m / 7.76 m/s = 47.35 s

Thus, it will take the boat 47.35 seconds.

Learn more about the relative velocity here:

https://brainly.com/question/19260269

#SPJ1

Compare the magnitude and direction of the gravitational force the sun exerts on Earth to the gravitational force Earth exerts on the sun.

Answers

The force that Earth applies to the sun is equal to the force that the sun applies to Earth. Between the Sun and the Earth, there is a gravitational force of 32.10.1021 N.

What does Earth's true name entail?

Contrary to popular belief, Earth doesn't even have a recognized international name. "Only a common mistake of the galaxy's scientific name, "Terra," exists. the planet's official name in English.

Why is the planet Earth referred to?

All living creatures, including plants, animals, and people, call the Earth their home, which is why it is referred to as a "living planet." The optimal solar proximity of the Earth provides it the perfect environment for the development of life things.

To know more about Earth visit:

https://brainly.com/question/13202215

#SPJ1

Each of the images below represents a plot. The horizontal axis on each plot represents time. The vertical axis represents whichever quantity (position, velocity, acceleration) is being discussed. The origin of each plot is represented by 0, and the function is represented by the colored line. For each of the statements at the bottom select the image that best represents the requested plot. You may use the same image for multiple statements if it is appropriate.

Answers

Constant velocity - Image D

Constant acceleration - Image A

Constant acceleration to the east - Image C

To release a ball from rest - Image B

What is the velocity time graph?

A velocity-time graph is a graph that represents the relationship between the velocity of an object and the time it has been moving. In this type of graph, the velocity of an object is plotted on the y-axis and the time elapsed is plotted on the x-axis.

A velocity-time graph can be used to determine various properties of an object's motion, such as its acceleration, velocity, and displacement. For example, the slope of the velocity-time graph gives the acceleration of the object. If the graph is a straight line, the object is undergoing constant acceleration. If the graph is a curved line, the object is undergoing non-uniform acceleration.

Learn more about velocity:https://brainly.com/question/18084516

#SPJ1

make figures showing the patellar reflex conduction times and patellar reflex conduction velocites under te various experimental conditions

Answers

The patellar reflex happens when there is a sudden change in muscle length; in this situation, the tendon velocity is stretched as a result of the application of the hammer stroke [3, 4].

How does one measure a normal patellar reflex?

The deep tendon reflexes are ordinarily ranked as follows: The response of zero is always abnormal. 1+ indicates a weak but unmistakably present response; this could or could not be typical. Fast response; 2+; considered usual.

If your knee doesn't respond, what does that mean?

A symptom of hyporeflexia is a diminished or nonexistent reflex reaction in your skeletal muscles. Damage to any area of your reflex arc—which may have occurred as a result of an underlying medical condition—causes it to occur.

To know more about reflex visit:

https://brainly.com/question/10669600

#SPJ4

Four identical electric charges +q are arranged at the vertices of a square with side L If they were released, they would fly apart. (a) Find the charge Q that if placed in the center of the square would result in zero total force on each charge q. (b) Is the equilibrium stable or unstable? Justify your answer.

Answers

A square has a charge in the middle and four charges at each of the four corners that are each equal to Q. if the economy is balanced.

An equilibrium is what?

As balancing is the definition of the word "equilibrium," it follows that a chemical process reflects an balance between both the reactants and the products involved in the reaction. In some physical processes, such as the melting of ice at 0°C, in which both snow and water are present, the equilibrium state can also be observed.

A charge is what?

The physical characteristic of matter that enables it to feel a force when exposed to an electromagnetic field is called electric charge. The two most frequent types of electric charges are positive and negative charges.

To know more about equilibrium visit :

https://brainly.com/question/14484174

#SPJ4

differentiate between bar magnet and electro magnet​

Answers

Permanent(Bar)magnet

(1)hey are permanently magnetized

(2)These are usually made of hard materials.

(3) The strength of the magnetic field line is constant. it can not be varied.

(4)The pole of permanent magnet can not change

(5)Example of permanent magnet is Bar Magnet

Electromagnet

(1) These are temporary Magnetized.

(2) They are usually made of soft materials.

(3)The strength of the magnetic fields can be varied accordingly to our need.

(4) The poles of an electromagnet can be altered

(5) Example of a temporary magnet is solenoid wounded across a nail and connected to a battery..

Was this answer helpful?

A bar magnet and an electromagnet are two different types of magnets that produce magnetic fields.

A bar magnet is a permanent magnet that generates a magnetic field due to the alignment of the electrons in the magnet's material. This type of magnet has a north pole and a south pole and its magnetic field remains constant over time.

An electromagnet, on the other hand, is a temporary magnet that generates a magnetic field when an electric current flows through a conductor. The magnetic field is proportional to the magnitude of the current and disappears when the current is turned off. Electromagnets are often used in applications such as motors, generators, and solenoids because their magnetic field can be controlled by adjusting the current.

In summary, the main difference between a bar magnet and an electromagnet is that a bar magnet is a permanent magnet while an electromagnet is a temporary magnet that requires a current to produce a magnetic field.

Was this helpful ?

A jogger maintains a constant speed around the boundaries of a rectangular field. Which of the following statements is true? O The acceleration of the jogger is uniform. O The acceleration of the jogger is zero. O The acceleration of the jogger is sometimes uniform. O The acceleration of the jogger is sometimes zero. O The acceleration of the jogger is never zero.

Answers

Options e, A jogger maintains a constant speed around the boundaries of a rectangular field. The jogger's acceleration is never zero.

An object's acceleration is a measurement of how quickly its velocity changes.

The jogger's acceleration is not zero since they are altering their velocity every time they get to a corner of the rectangular field. This is referred to as centripetal acceleration and is the acceleration necessary to maintain an object's circular motion at a constant speed.

Although the jogger's pace is constant, their direction is changing, which causes a change in their velocity, which in turn causes a change in their acceleration.

Learn more about the constant speed at

https://brainly.com/question/30151073

#SPJ4

a racing sports car traveling with a constant velocity of 100 mph due west startles a turtle by the side of the road who begins to move out of the way. which of these two objects is likely to have the larger acceleration at that instant? explain ____

Answers

The object that is likely to have the larger acceleration at that instant is the turtle. The begins to move from rest.

Analysis of a moving objectA racing sports car traveling with a constant velocity of 100 mph due west.It startles a turtle by the side of the road.The turtle begins to move out of the way.

Of these two objects at that instant, find which is likely to have the larger acceleration!

The racing sports car moves with a constant speed. it means that it doesn't accelerate. No information explains that the car accelerated or decelerated as well. The car has no acceleration.

The turtle is initially at rest, then it begins to move out of the way. It moves from 0 m/s to a certain speed of v in a certain time. So, the turtle has an acceleration.

Hence, of these two objects, the turtle is likely to have the larger acceleration

Learn more about accelerated motion here:

brainly.com/question/30590883

#SPJ4


A Hockey puck Slides across
the ice at a constant speed of
3.0 m/s for 1.5 seconds. How far does it move during this time.

Answers

The distance travelled by the huckey puck, given that it slides across the ice with a speed of 3.0 m/s for 1.5 seconds is 4.5 meters

How do I determine the distance travelled?

We know that speed is defined as the distanced travelled in a particular time.

Speed = distance / time

Making distance the subject, we have

Cross multiply

Distance = speed × time

With the above formula, we can obtain the distance the hockey puck will slide Details below:

Speed = 3.0 m/sTime = 1.5 secondsDistance travelled =?

Distance = speed × time

Distance travelled = 3.0 m/s × 1.5 seconds

Distance travelled = 4.5 meters

Thus, we conclude that the distance travelled is 4.5 meters

Learn more about distance travelled:

https://brainly.com/question/26156790

#SPJ1

Answer:

4.5m

Explanation:

Using

Distance= speed * time

D = 1.5 * 3 m

D = 4.5 m

The thrust bearing is subjected to the loads as shown. Determine the order of average normal stress developed on cross section through BC and D.

Answers

the order of average normal stress developed on cross section through B, C and D c) B>C>D.

What is the primary variation in normal stress?

When examined at constant levels of the applied shear stress s, the initial stress distribution differences N1 (cv) show a decreasing trend as the solid fraction cv increases.In other words, the shear stress increases more quickly than the usual stress differential does with filler volume fraction.

How is the typical soil stress determined?

EF is the area, and is the stress, hence F1 = EF.EF = EF = θ θ θ θ θ θ = θ θ θ θregular stress on the plane's EF.We can select the value of from this equation in a way that it equals zero.The primary plane is the one that forms this angle with block, which only experiences normal stress.

To know more about normal stress visit:

brainly.com/question/30115203

#SPJ4

In the circuit shown below batteries and all meters have no significant resistances.
a. If the switch S is open:
(i)
(ii)
Calculate the current through the 100 £2 resistor.
What is the reading of the voltmeter?
b. If the switch S is closed:
(i)
(ii)
(iii)
Calculate the current through the 100 2 resistor.
Calculate the current through the 75 22 resistor.
What is the reading of the ammeter?
V = IP
(a) Sign conventions for emfs
+E: Travel direction
from-to +:
-Travel →
-E: Travel direction
from+to-
←Travel-
E
(b) Sign conventions for resistors
+IR: Travel opposite
to current direction:
-Travel-
14
-IR: Travel in
current direction:
←Travel
-
100.0 Ω
25.0+
V
"L
(1 mark)
(1 mark)
(1 mark)
(1 mark)
(1 mark)
a
15.0
S
s TV
:75.0
A
2
Ω
b
V

Answers

Since every resistance is connected in series, the current flowing through the 100 ohm resistor is 0.02 A.

Describe the current formula.

The formula for electric current can be used to calculate it: The "current equation," which is derived from Ohm's Law, is the equation I=V/R. Current is represented by the variable "I," voltage by the variable "V," and resistance by the variable "R."

According to Ohm's law, the current flowing through a conductor is proportional to the voltage V and the resistance R; thus, V equals IR. If a charge Q flows through the cross-section of a conductor in time t, the current I is equal to Q/t, which is an alternative statement of Ohm's law. The S.I. charge unit is the coulomb, and electric current is measured in amperes, or coulombs per second.

Learn more about current:

brainly.com/question/25922783

#SPJ1

An object is 20 cm in front of a diverging lens with a focal length of 10 cm. Use ray tracing to determine the location of the image. Is the image upright or inverted? Is it real or virtual?

Answers

The location of the image (object is 20 cm in front of a diverging lens with a focal length of 10 cm = 6.66 cm. The image created by a diverging lens:

Image reduction

Image is vertical

The image is virtual.

Additionally known as a dispersive lens, negative lens, divergent lens, or concave lens. A lens that creates parallel light beams that spread out and veer away from the optical axis after leaving the lens.

The equation:

1/f = 1/v - 1/u

Where,

f = focal length

v = image distance

u = the object distance

Hence,

1/v = - ⅒ - 1/20

= -2/20 - 1/20

v = 6.66 cm

The image created by a diverging lens

Image reduction

Image is vertical

The image is virtual.

Learn more about divergence lens here: https://brainly.com/question/29459725

#SPJ4

Other Questions
a wedding ring is an example of , while sexually exclusive with their spouses is an example of . The actions of individuals in an economy can compound upon one another, leading to outcomes that magnify the actions of individuals.a. Trueb. False in late '66, the beatles reached a new peak for songwriting and studio techniques with an album featuring east indian instruments, tape loops, brass bands, and sound effects, also reflecting their environment of drug experimentation. it is... find the geometric mean of 2 and 22 in what way did education play a crucial role in the emergence of the middle class during the urbanization period? in radioactive decay, which type of emission involves an unstable nucleus creating an electron then ejecting it in order to become stable? Consider the following reaction mechanism and its associated energy diagram:S1: CH4 (g) + HBr(g) --> CH5+ + BrS2:CH5 + Br --> CH5Br (1) in a positive number of two digits, the sum of the digits is 15, if the digits are interchanged, the number is increased by 9. Find the number. As federalism has evolved over the years, more power has gone to the federal government. In the modern era, new types of federalism has emerged. Choose the correct types with examples that are included. Can be multiple answers A) Competitive federalism (states compete for federal grants)Competitive federalism (states compete for federal grants)B) Centralized federalism (the US government sets all education policy)Centralized federalism (the US government sets all education policy)C) Cooperative federalism (federal and state governments coordinate in policymaking like job creation)Cooperative federalism (federal and state governments coordinate in policymaking like job creation)D) Dual federalism (federal and state governments are autonomous in all policies like taxes)Dual federalism (federal and state governments are autonomous in all policies like taxes)E) Judicial federalism (the Supreme Court rules that state marriage laws are unconstitutional)Judicial federalism (the Supreme Court rules that state marriage laws are unconstitutional) Solve the following system of inequalities graphically on the set of axes below.State the coordinates of a point in the solution set.y-x+3y > 2x - 6 what is the maximum demand rate this system can accommodate? do not round intermediate calculations. round your answer to the nearest whole number. parts/hr Write the following as an algebraic equation . Use x as the unknown and use a sum. Sum of a number and its equivalent to 115.6 propane, c3h8 , is a common fuel used for cooking and home heating. what mass of o2 is consumed in the combustion of 1.40 g of propane? A cubic function of the form u = a * x ^ 3 + b * x ^ 2 + cx + d yields the following table:x yoo- 5The coefficient a =,and d= Box.,b=,C= Can someone answer this pls -3y + 4 2 + 6y which actions to improve oxygenation would the nurse take for a patient who has dyspnea, confusion, lung secretions, and hypoxia? sherpath the sikh movement, which began in the sixteenth century, was influenced by what other religious movement? When did Christianity became the dominant religion in Europe 7/3a-8/5+4/15a perform the operation and simplify the resulting fraction An object travels to the right with a speed of 149.5 m/s and then travels left at 164.8 m/s. What is the change in its velocity?