TRUE OR FALSE. if an object does not change its position at a given time interval, then it is at rest or its speed is zero or not accelerating

Answer:

parallax

Due to foreshortening, nearby objects show a larger parallax than farther objects when observed from different positions, so parallax can be used to determine distances. To measure large distances, such as the distance of a planet or a star from Earth, astronomers use the principle of parallax.

Answer: C- the outer core

Explanation: The outer core is a thick layer of molten rock that encircles the inner core.

Explanation:

soln,

weight=600N

mass=?

gravity=9.8 m/s²

now,

hope it helps.

Answer:

m = 61.22 kg

Explanation:

F = 600 N

g = 9.8 m/s²

m = ?

F = mg

600 = m(9.8)

---> m = 61.22 kg

Answer:

the final speed of the first ball is 0.5 m/s

Explanation:

Given;

mass of the first body, m₁ = 8000 kg

mass of the second body, m₂ = 16,000 kg

initial velocity of the first body, u₁ = 2.5 m/s

initial velocity of the second body, u₂ = 0

final velocity of the stationary mass, v₂ = 1 m/s

let the final velocity of the first body = v₁

Apply the principle of conservation of linear momentum;

m₁u₁  +  m₂u₂  = m₁v₁   +   m₂v₂

8000(2.5)  +   (16,000 x 0)   =   8000v₁   +  16,000 (1)

20,000  +  0 = 8000v₁  +  16,000

8000v₁ = 4000

v₁ = 4000/8000

v₁ = 0.5 m/s

Therefore, the final speed of the first ball is 0.5 m/s

Answer:

65000g

24.325 hrs

7500m

Answer:

I) 65000 g   II)24.325 hours  III)7500 m

Explanation:

I) 1 kg = 1000 g

65 kg = 65 * 1000 g = 65000 g

II) 1 hour = 3600 seconds

1 second = 1/3600 hours

87570 seconds = 87570 * 1/3600 hours =24.325 hours

III) 1 km = 1000 m

7.5 km = 7.5 * 1000 m = 7500 m

Answer:

English only

Explanation:

When solving problems related to Electric Fields, care must be taken about symmetries. In our particular case when we take a look to at the drawings of the attached file, we realize:

1.-By symmetry each dx associated at a, has an opposite dx with point b as reference. The respective dE ( the charge is uniform ) is the same, as the charge of the wire is positive the force and the Field on a test charge (+) located at h will be upward, therefore the components dEx will cancel each other and the Electric Field becomes E = Ey = ∫ 2×dE× cosθ

The solutions:

A) Ey = 4623 N/C

B) Ey = 19.34 N/C

E = Ey = ∫ 2×dE× cosθ

Here     cosθ   = h/ d   ⇒  cosθ = h/√h² + x²      dE = K× dQ / d²

d² = h² + x²

k = 8.9 ×10⁹ Nm²C⁻²  ;   dQ = λ×dx     λ = 150×10⁻⁹ C    h = 0.08 m

Then by substitution

Ey =  2 ∫[K× λ×dx/ (h² + x²) ] × h / √h² + x²

reordering that equation:

Ey = 2×K×λ×h ∫ dx / [√ ( h² + x² ) ]³          (2)

To solve the integral we make use of a change of variables

x = h × tanα     then   x² = h² ×tan²α   and  dx = h× sec²α dα

plugging that values in equation (2)

Ey  =  2×K×λ×h ∫  h× sec²α× dα / [√ ( h² + h²tan²α)]³

Ey  = 2×K×λ×h² ∫ sec²α× dα / [ h × √ (1 + tan²α)]³            1 + tan²α = sec²α

Ey = 2×K×λ×h²× ∫ (sec²α / h³× sec³α )×dα

Ey = 2×K×λ/h × ∫ ( 1 / secα dα

Ey = 2×K×λ/h × sinα             now we αneed to come back to our original variables:

as   x = h × tanα         tanα = x/h   then x is the opposite leg in a right triangle  and h the adjacent one then the hypothenuse is √ (h² + x²)         then    sin α = x/ √ (h² + x²)      

Ey = 2×K×λ/h × x/ √ (h² + x²) |₀⁰°⁰⁵

Ey  = 2×8.9×10⁹× 150×10⁻⁹× 5×10⁻²/8× 10⁻²× √ 10⁻² ( 8 + 5 )   N/C

Ey = 4623 N/C

To answer the second question again we will make use of symmetries if you look at drawing ( Figure 2 ) you see that again the components in direction of x-axis cancel each other and the components in y-axis direction will add. Then

Ey = ∫ dE× cosθ

following the same procedure  we will find:

Ey = ∫ [K×λ × dl/d²] × h/ d

The importan point here is that the radius of the circle is

2×π×r = 0.01      ( the length of the wire)  ⇒  r = 0.16×10⁻² m

And we need to take into account that the integration is over the circle and the length of the circle is 0.01 m or ××2×π×r. All other factors are constant. Then by substitution

Ey = [K×λ ×h×  / ( √ r² + h²)³ ] × 10⁻²    N/C

Ey = 8.9 × 10⁹ × 150× 10⁻⁹ × 6× 10⁻² × 10⁻² / √ 10⁻² ( 0.16 + 6)

Ey = 0.8 × 10² / 6

Ey = 19.34 N/C

Answer:

mechanical waves,

.

the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.

.

If the amplitude increases the volume increases and vice versa.

.

The type of medium affects a sound wave as sound travels with the help of the vibration in particles.

.

The higher the frequency, the shorter the wavelength.

Explanation:

Answer:

1 . Soundwave

2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz

3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound

4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves

Answer:

D

Explanation:

The tectonic plates move on the mantle, sort of floating on it as they are part of the crust. When they collide things like mountain ranges form, and big earthquakes happen.

Answer:

6Eo

Explanation:

[tex]\boxed{\large{\bold{\blue{ANSWER~:) }}}}[/tex]

[tex]\sf What \: is \: acceleration? \\ \\ \sf The \: rate \: of \: change \: of \: velocity \: of \: an \\ \sf object \: with \: respect \: to \: time \\ \sf is \: known \: as \: acceleration. [/tex]

Answer:

Oort cloud

Explanation:

The large reservoir of comet nuclei far beyond Pluto, from which we believe new long-period comets come into the inner solar system, is called Oort cloud.

The comets hich have the large periods that means more than 200 years to orbit the Sun generaly comes from Oort cloud hich is also knon as the cometary cloud.

Answer:

I = 0.2 A

Explanation:

Lamp is rated at 300 mA

I_lamp = 300 mA = 0.3 A

Voltage is; V = 3V

Thus; Resistance is given by;

R = V/I

R = 3/0.3

R = 10 ohms

Now, since the ammeter of 5 ohms is connected in series with the lamp. Thus equivalent resistance;

R_eq = 10 + 5

R_eq = 15 ohms

Ammeter current will be;

I = V/R_eq

I = 3/15

I = 0.2 A

Answer:

The moment of inertia should be decreased.

Explanation:

The torque is given by

Torque = Moment of inertia x angular velocity

To keep the torque constant, the spin rate be increased when the moment of inertia decreases.  

The moment of inertia of the body are the efforts to put the object in rotation.  

26. D. crushing the sugar cube and dissolving it in water.

27. A. atom

28. B. molecule

29. B. plum pudding model of Joseph John Thomson

30. B. He used cathode ray tubes which showed that all atoms contain tiny negatively charged subatomic particles or electrons

31. D. protons and neutrons are relatively heavier than electrons.

Answer:

1-The liquid pressure is same at all points lying on the same horizontal plane in a stationary liquid.

2-The liquid pressure at a point inside the liquid is same in all directions.

3-The liquid pressure at a point inside the liquid is directly proportional to the depth of that point from the free surface of liquid.

4-The pressure of liquid at same depth is different for different liquids. It is directly proportional to density of liquid. That is, for same depth the liquid pressure is larger for liquid of larger density.

Explanation:

Answer: prevent excitation light from reaching the detector

Explanation:

A fluorometer refers to the device that's used in the measurement of parameters that are of visible spectrum fluorescence. They also prevent excitation light from reaching the detector.

These parameters are used in the identification of the amount and presence of molecules in a medium.

Answer:

-29.9907

Explanation:

c = Q / (mΔT)

You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)

then you would solve

Such asSuch ToSuch aSuch as طHow do I send the answer to the question?OkI don't know how to use this program

Answer:

MOMENTUM = 40kg ms-¹

hope it helps

have a nice day

Answer:

A. to reduce the loss of energy in the form of heat across the transformer

Explanation:

The core of the transformer is laminated to minimise the energy as they interfere with the efficient transfer of energy from the primary coil to the secondary one. The eddy currents cause energy to be lost from the transformer as they heat up the core - meaning that electrical energy is being wasted as heat.

Answer:

C: the process by which stars create the heavier elements

Explanation:

Stellar nucleosynthesis is defined as the process of nuclear fusion by which heavier elements are formed within stars by from the combination of protons and neutrons gotten from the nuclei of lighter elements.

Looking at the options, the correct one is Option C

Answer:

same value because both sides are equal

Explanation:

equal value

Answer:

The number of electrons flowing per second is [tex]4.375\times 10^{18}[/tex].

Explanation:

How many electrons per second pass through a section of wire that carries a current of 0.70 A.?

Current, I = 0.7 A

time, t = 1 s

According to the definition of current, let the charge is q.

q = I t

q = 0.7 x 1 = 0.7 C

Let the number of electrons is n.

[tex]n =\frac{q}{e}\\\\n = \frac{0.7}{1.6\times 10^{-19}}\\\\n = 4.375\times 10^{18}[/tex]

[tex] \green{\huge{\red{\boxed{\green{\mathfrak{QUESTION}}}}}} [/tex]

ELASTIC LIMIT, YIELD POINT AND ULTIMATE TENSILE STRENGTH.

[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{TOPIC}}}}}}} [/tex]

Mechanical Properties Of Solid.

[tex] \huge\green{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}}}[/tex]

[tex] \bold{ \green{PART \: \: (1):-}} \\ \bold \green {{ ELASTIC \: \: LIMIT}}[/tex]

It is also called yield point

In this limit, energy provided to the material to cause deformation when removed then the material returns to its own shape and size.

In this limit each body shows elastic nature

[tex] \bold{ \red{PART \: \: (2):-}} \\ \bold \red {{YIELD \: \: STRENGTH}}[/tex]

It is the fix amount of the energy which causes fixed permanent set of deformation.

In this body shows plastic deformation.

The level of stress that corresponds to the yield point is referred to as the yield strength of the material.

[tex]\bold{ \purple{PART \: \: (3):- \:ULTIMATE }} \\ \bold \purple {{TENSILE \: \: STRENGTH}}[/tex]

It is the amount of the stress which causes permanent set of deformation after the yield point.

Body show perfect plastic deformation.

This shows a permanent set of deformation.

[tex] \red \star{Thanks \: And \: Brainlist} \blue\star \\ \green\star If \: U \: Liked \: My \: Answer \purple \star[/tex]

Answer:

0.2

Explanation:

The given parameters are;

The acceleration of the train, a = 0.2·g

The mass of the person standing on the train = m

Let μ represent the coefficient of static friction, we have;

The force acting on the person, F = m × a = m × 0.2·g

The force of friction acting between the feet and the floor, [tex]F_f[/tex] = m·g·μ

For the person not to slide we have;

The force acting on the person = The force of friction acting between the feet and the floor

F = [tex]F_f[/tex]

∴ m × 0.2·g = m·g·μ

From which we get;

0.2 = μ

The coefficient of static friction that must exist between the feet and the floor if the person is not to slide, μ = 0.2.

Answer:

2 Hz.

Explanation:

Frequency is simply defined as the number of appearances of a periodic event occurring per time. It is usually measured in cycles/second.

Now, in this question, we are told that there are 2 cycles for each second.

Thus, we can say that the frequency is 2 cycles/1 s = 2 Hz.

Explanation:

Hydraulic Pressure-Control, On-Off Deluge Valve

FP-400Y-5DC

The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.

Answer:

Acceleration is 1.2 m/s^2.

Explanation:

initial velocity, u = 0

distance, d = 60 m

time, t = 10 s  

Let the acceleration is a.

use second equation of motion

[tex]s= u t +0.5 at^2\\\\60 = 0 + 0.5 \times a \times 10\times 10\\\\a = 1.2 m/s^2[/tex]

Now according to the Newton's second law

Force = mass x acceleration

Let the mass is m.

F = m x 1.2 = 1.2 m Newton  

Answer:

C. 9.9 cm

Explanation:

The location of the object, u = 14 cm

The location of the image, v = 5.8 cm

The focal length of the mirror, f = Required

The mirror formula for a convex mirror is given as follows;

[tex]\dfrac{1}{u} -\dfrac{1}{v} = -\dfrac{1}{f}[/tex]

Therefore, we get;

[tex]\dfrac{1}{14 \ cm} -\dfrac{1}{5.8 \ cm} =- \dfrac{41}{406 \ cm} = -\dfrac{1}{f}[/tex]

Therefore;

[tex]f = \dfrac{406 \ cm}{41} \approx 9.9 \ cm[/tex]

The focal length of the mirror, f ≈ 9.9 cm

Answer:

C. Increase in back emf

Explanation:

As the current through the field winding decreases the field strength also decreases and the back-emf is reduced, as a result the motor speeds up.

When the motor begins to speed-up, an additional back EMF is generated due to induction which reduces armature current. This also results in reduced strength of the field flux. The back emf generated is not enough to reduce the armature current which could stop the acceleration of the motor and the motor further accelerates.

Answer:

A         Em

     1          ½ K

     2         ½ k 4 = 2k

     3         ½ k 9 = 4.5 k

     4         ½ k 16 = 8k

Explanation:

The total mechanical energy of a simple harmonic movement is constant in time, let's look for the energy at one end of the movement, where the velocity of the body is zero.

        Em = U = ½ k x²

at the end x = A

        Em = ½ k A²

Let's build a table for the energy and as a function of the amplitudes of the movement

     A         Em

     1          ½ K

     2         ½ k 4 = 2k

     3         ½ k 9 = 4.5 k

     4         ½ k 16 = 8k

as a function of the lowest energy

      1            Eo = ½ k

      2           4Eo

      3           9 Eo

      4          16Eo