true or false? a faraday bag stops any electromagnetic emanations from passing into or out of the bag, preventing a mobile device from communicating with the outside world. true false

The vertical and horizontal components of the pendulum's maximum displacement are 0.82 m and zero, respectively. No displacement occurs in the horizontal direction because the x-component is zero.



Mass of bullet, m = 29 g = 0.029 kg
Velocity of bullet, v = 210 m/s
Mass of pendulum, M = 3.2 kg
Length of pendulum, l = 2.9 m

Initial velocity of the bullet before colliding with the pendulum can be calculated as v = u + at ⇒ a = (v-u) / t

Here, u = 0 (initial velocity is zero)
t = time of flight of the bullet = 2.9 / (9.81) = 0.295 s
Hence, a = v / t = 210 / 0.295 = 712.71 m/[tex]s^2[/tex]

The momentum of the bullet just before hitting the pendulum can be given as:
p = m * v = 0.029 * 210 = 6.09 N s

Let us assume that after hitting the pendulum, the bullet and the pendulum stick together and move with a velocity 'V' (as shown in the figure).

Bullet and Pendulum moving together

According to the principle of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision:

(m * v) = (M + m) * V
⇒ V = m * v / (M + m)
⇒ V = 0.029 * 210 / (3.2 + 0.029)
⇒ V = 4.03 m/s

Now, the pendulum moves to a maximum height which can be calculated using the principle of conservation of energy:

Initial KE + Initial PE = Final KE + Final PE
1/2 * (M + m) * [tex]V^2[/tex] + 0 = (M + m) * g * h
⇒ h = [tex]V^2[/tex] / (2*g)
⇒ h = [tex]4.03^2[/tex] / (2*9.81)
⇒ h = 0.82 m

Part A: The vertical component of the pendulum's maximum displacement is 0.82 m.

Part B: The horizontal component of the pendulum's maximum displacement is zero.

The bullet hits the pendulum and gets embedded into it. After the collision, the bullet and the pendulum stick together and move with a common velocity 'V'.The pendulum moves to a maximum height of 0.82 m (which is the maximum displacement in the vertical direction). However, there is no displacement in the horizontal direction (i.e., the x-component of displacement is zero).

Learn more about displacement: https://brainly.com/question/248054

#SPJ11

Unbalanced net forces that are not counterbalanced by opposing forces cause an object's motion to accelerate.

Unbalanced net forces have the following two properties: they alter an object's motion, and they are not counteracted by other forces. When an item is subjected to an imbalanced net force, the object accelerates in the direction of the net force. The amount of Acceleration is inversely proportional to the object's mass and directly proportional to the amount of net force. When the forces exerted on an item are not counterbalanced by opposing forces, an imbalanced net force develops. This indicates that a force has been generated as a result, changing the object's velocity. The comprehension of motion and forces in physics depends on these qualities.

learn more about Unbalanced net forces here:

https://brainly.com/question/29769471

#SPJ4

For a nonrelativistic electron and a nonrelativistic proton having the same de Broglie wavelength, we can say that: both particles have the same speed and both particles have the same momentum. The correct answers are Option A and E.

The de Broglie wavelength is defined as the wavelength of a particle, which is associated with its momentum. It is given by,

λ = h / p

where λ is the de Broglie wavelength, h is the Planck's constant and p is the momentum of the particle.

Therefore, if a nonrelativistic electron and a nonrelativistic proton have the same de Broglie wavelength, they must have the same momentum. This is because the momentum of the particle is inversely proportional to its wavelength.

The formula for the kinetic energy of a particle is given by,

K.E. = p² / 2m

where K.E. is the kinetic energy of the particle, p is the momentum of the particle and m is the mass of the particle.

Since the momentum of the electron and the proton is the same, the kinetic energy of the electron and the proton will depend on their mass. Therefore, it can be concluded that the electron will have more kinetic energy than the proton because the mass of the electron is much smaller than the mass of the proton.

Learn more about De Broglie theory here: https://brainly.com/question/20372425

#SPJ11

The maximum speed of the car is 66.83 km/h and the minimum speed of the car is 30.83 km/h.

Centrifugal force = friction force

mv²/r = μmgcosθ

μ = 0.35, g = 9.8m/s², θ = angle of banking angle

Maximum speed when the car moves too fast, it will slide away from the road. In this case, the frictional force will act outward against the motion of the car. This force will be directed as follows:

Friction force (f) = μNsinθ

where N = mg, Friction force (f) = 0.35 × 9.8 × cos (68/68) = 3.225 N

The maximum velocity of the car, that is, the velocity at which it will slide outward and upward from the road is:

vmax = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 66.83 km/h

Therefore, the car must move at a speed of 66.83 km/h or less, or it will slide away from the road.

Minimum speed when the car moves too slowly, it will move down the slope of the curve. In this case, the frictional force will act inward towards the car's motion. This force will be directed as follows:

Friction force (f) = μNsinθ = 3.225 N

The minimum velocity of the car, that is, the velocity at which it will slide outward and downward from the road is:

vmin = √(μgr) = √(0.35 × 9.8 × 68) = 18.563 m/s = 30.83 km/h

Therefore, the car must move at a speed of 30.83 km/h or more, or it will slide away from the road.

Learn more about Centrifugal force here:

https://brainly.com/question/17167298

#SPJ11

The coordinated functions of the Nervous, Endocrine, and Reproductive systems are:

Coordinated functions refer to the integration and communication between different organs, systems, and tissues in the body to achieve a common goal or purpose. In biological terms, coordinated functions often involve multiple physiological systems working together to maintain homeostasis, respond to stimuli, or carry out complex behaviors or processes.

Examples of coordinated functions include the regulation of blood glucose levels by the pancreas and liver, the coordination of movement by the nervous and musculoskeletal systems, and the release of hormones by the endocrine system to control various physiological processes.

Learn more on coordinated functions here: https://brainly.com/question/15686131

#SPJ1

The question is:

"COORDINATED FUNCTIONS OF THE NERVOUS, ENDOCRINE, AND REPRODUCTIVE SYSTEMS"

Directions: Identify the part of the brain that is involved in each situation below. Write only the letter of your answer.

A. Amygdala

B. Brocka's Area

C. Cerebellum

D. Cerebrum

E. Hippocampus

F. Occipital Lobe

G. Hippocampus

H. Hypothalamus

I. Inferior Colliculus.

J. Thalamus

K. Pons

L Superior Colliculus

M. Pineal Gland

N. Wernicke's Area

O. Pituitary Gland

1. "My heart tells me that you are the one. I love you so much!"

2. "IAOCEVOY! I don't know what that means. It's all Greek to me!"

3. "Chartreuse, Olive,Turquoise, and Mint are all shades of green."

4. "Janna always wakes up at 4 in the morning, regardless of whether she uses an alarm clock or not."

5. "I don't remember the way going to Myla's house. Can you accompany me there?"

6. Jenny's mother is about to give birth, she complains about contraction and pain usually when the baby is kicking

7. "Anthony is a very skilled dancer. He just won the school hip hop dance competition last week."

8. "As Nica was walking on the road she readily moved to the side for she heard an incoming ambulance"

9. "Elsa loves making faces whenever she talks to her friends."

10. "Ryan usually talks about how happy his high school days were to his grandchildren."

The airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.

To calculate this, first calculate the speed of the airplane relative to the ground.

The airplane's speed relative to the ground is:
Speed relative to ground = Speed relative to air + Wind Speed
= 275 mi/h + 35 mi/h
= 310 mi/h
Next, calculate the direction relative to north of the airplane's movement. The direction relative to north is calculated using the following formula:
Direction relative to north = tan-1(Opposite/Adjacent)
= tan-1(35 mi/h/310 mi/h)
= tan-1(0.1145)
= 298.93°
Therefore, the airplane should head in a direction of 298.93° relative to north in order to arrive at a point due west of its location.

To know more about Direction please visit :

https://brainly.com/question/30337361

#SPJ11

1) The force constant of the spring is 0.76N/cm, 2) The magnitude force needed to stretch the spring 5.00cm from its unstretched length is 3.80N, 3) Work done to compress this spring 4.00 cm from its unstretched length is 12.48J, 4) Force needed to stretch it this distance is 3.04N.

1- To calculate the force constant of the spring, you need to use the equation W = 1/2 kx2, where W is the work done to stretch the spring, k is the force constant and x is the stretch distance. In this case, W = 19.0J and x = 5.00cm, so k = 19.0/25 = 0.76N/cm.

2- To calculate the magnitude of the force needed to stretch the spring 5.00cm from its unstretched length, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 5.00cm = 3.80N.

3- To calculate the work done to compress this spring 4.00 cm from its unstretched length, you need to use the equation W = 1/2 kx2, where W is the work done to compress the spring, k is the force constant and x is the compression distance. In this case, W = 1/2 x 0.76N/cm x (4.00 cm)2 = 12.48J.

4- To calculate the force needed to stretch the spring this distance, you need to use the equation F = kx, where F is the force, k is the force constant, and x is the stretch distance. In this case, F = 0.76N/cm x 4.00cm = 3.04N.

To know more about spring, refer here:

https://brainly.com/question/14670501#

SPJ11#

When only one lightbulb blows out, an entire string of decorative lights goes out, which means that the lights in this string must be connected in series with one current pathway.

In a series circuit, the components are connected end to end in a single path, so the current flows through each component in turn. If one component, such as a lightbulb, fails, the circuit becomes incomplete, and the current cannot flow through any of the components downstream of the failed component. This results in all the lights in the series circuit going out when one lightbulb blows out.

In contrast, in a parallel circuit, the components are connected across multiple current pathways, so if one component fails, the current can still flow through the other components, and they will continue to function normally. Therefore, if one lightbulb blows out in a parallel circuit, the other lights will continue to work.

Learn more about the series circuit:

https://brainly.com/question/19865219

#SPJ11

Without air resistance, both the basketball and the medicine ball will fall at the same rate and reach the ground at the same time. This is due to the fact that gravity affects objects the same, regardless of their mass.

When a ball is dropped from a height, the only force acting upon it is gravity. Gravity pulls each ball with the same force; however, the ball with more mass will have more gravitational potential energy than the other. It means the basketball will have more potential energy to convert to kinetic energy during the fall, making it faster than the medicine ball.

Thus, in conclusion, the basketball would fall first as it is more massive than the medicine ball.
When a basketball and a medicine ball are dropped from the same height at the same time without air resistance, the basketball would land first. The explanation for this is due to the size and weight of each ball.

Basketball is heavier than the medicine ball, and both have the same height to fall. The more massive the object, the more gravitational pull it experiences, and thus, it falls faster. So, the basketball would land first if a basketball and a medicine ball are dropped from the same height at the same time without air resistance.

Read more about mass here:

https://brainly.com/question/19385703

#SPJ11

The coefficient of static friction between its tires and the ground is 0.80.

To determine the coefficient of static friction between its tires and the ground, we can use the expression for the coefficient of static friction given by;

μ_s = (g * tan⁡θ) / (1 - (v²/r²))

Where;

μ_s = Coefficient of static friction

g = Acceleration due to gravity

θ = Angle of banking

r = Radius of the curve

v = Velocity of the vehicle

Substitute g = 9.8 m/s², θ = 0°, r = 100 m, and v = 25 m/s in the above expression.

μ_s = (9.8 * tan⁡0) / (1 - (25²/100²))

μ_s = 0.80

Hence, the coefficient of static friction is 0.80.

Learn more about coefficient of static friction here: https://brainly.com/question/25050131.

#SPJ11

For calculation of potential energy mass of the apple , average acceleration of the apple and height of apple is required.

For more information on kinetic and potential energy kindly visit to

https://brainly.com/question/11749818

#SPJ1

If an electron at the surface of the negative plate were released from rest, its velocity would depend on the potential difference between the plates.

Potential difference (V) is the work done per unit charge. Its unit is volts (V). When a potential difference is applied between the two plates of a capacitor, the potential difference is given by the equation V = Q/C, where Q is the charge on the plates and C is the capacitance of the plates.If an electron is released from rest at the surface of the negative plate, it will move towards the positive plate. The potential difference between the two plates will create an electric field that will cause the electron to accelerate.

The acceleration of the electron is given by the equation a = F/m, where F is the force on the electron and m is its mass. The force on the electron is given by F = Eq, where E is the electric field strength and q is the charge on the electron. Therefore, the acceleration of the electron is given by a = Eq/m.After a time t, the velocity of the electron is given by v = at. Therefore, the velocity of the electron at any time t is given byv = (Eq/m)t.Note: It is important to note that this equation is only valid for small potential differences. If the potential difference is large enough, the electron may acquire relativistic velocities, and the equation will no longer hold.

Learn more about potential difference at:

https://brainly.com/question/16541033

#SPJ11

Answer:

Approximately [tex]705\; {\rm m}[/tex].

Explanation:

Let [tex]x[/tex] denote the distance travelled before the plane takes off.

Let [tex]u[/tex] denote the initial velocity of the plane, and let [tex]v[/tex] denote the velocity of the plane when it takes off. It is given that the takeoff speed is [tex]v = 65\; {\rm m\cdot s^{-1}}[/tex]. Assuming that the plane was initially stationary, initial velocity would be [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex].

It is given that the acceleration of the plane would be [tex]a = 3\; {\rm m\cdot s^{-2}}[/tex].

Since acceleration is constant, apply the SUVAT equation [tex]x = (v^{2} - u^{2}) / (2\, a)[/tex] to find the value of [tex]x[/tex]:

[tex]\begin{aligned} x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \frac{(65)^{2} - (0)^{2}}{2\, (3)}\; {\rm m} \\ &\approx 705\; {\rm m}\end{aligned}[/tex].

(Rounded up.)

Hence, the length of the runway should be at least [tex]705\; {\rm m}[/tex].

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north directions and The magnitude of the magnetic force is about 0.825 Newtons.

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north. The magnitude of the force is given by the equation F = B × I × L, where B is the magnetic field strength, I is the current, and L is the length of the wire. In this case, the magnitude of the force is 0.825 N.
If the current is running vertically upward, then the direction of the force that our planet's magnetic field exerts on the cord is from east to west.

The magnitude of the force is again given by the equation F = B × I × L, so the magnitude of the force is 0.825 N.
If the current is running from north to south, then the direction of the force that our planet's magnetic field exerts on the cord is from west to east.
The magnitude of the force is again 0.825 N. The magnetic force is not large enough to cause significant effects under normal household conditions.

Learn more about Magnetic force here:

https://brainly.com/question/3160109

#SPJ11

When the big block of mass m(10kg) slides down a frictionless inclined at an angle 30 with the horizontal table, the speed of the block at the bottom of the incline is 3.14 m/s.

Given that

Mass of the block, m = 10 kg.

Angle of inclination, θ = 30°

Initial velocity, u = 0.

Frictional force, f = 0.

Using the formula for gravitational force, F = mg

where, g = 9.8 m/s² (acceleration due to gravity)

F = mg= 10 kg × 9.8 m/s²= 98 N

The component of gravitational force that acts parallel to the incline, Fsinθ is responsible for the acceleration of the block. Fsinθ = ma; Where a is the acceleration of the block.

a= (98 N)sin 30° / 10 kg= 4.9 m/s²

Using the formula for speed, v = u + at where,

u = initial velocity = 0m/s

t = time taken = time taken to slide from top to bottom of the incline.= √(2h/g) where,

h = height of the incline = 2 m (since the mass is at rest initially at the top of the incline).

Therefore, t = √(2 × 2 m / 9.8 m/s²)= 0.64 s

Substituting the values in the above formula, v = u + at= 0 + (4.9 m/s² × 0.64 s)= 3.14 m/s.

To know more about speed, refer here:

https://brainly.com/question/29309579#

SPJ11#

None of the answer options provided are correct as they all involve calculations that assume certain values for the pressure, volume, and temperature of the gas.

What is Constant Pressure?

Constant pressure is a thermodynamic process in which the pressure of a system remains constant during the process. This means that any change in volume or temperature of the system must be accompanied by a corresponding change in some other property, such as the amount of heat added or removed from the system.

Since the gas is compressed at a constant pressure, the work done on the system can be calculated as:

W = -PΔV

In this case, P is constant, so we have:

W = -P(V2 - V1)

W = -P(4 m^3 - 10 m^3)

W = -P(-6 m^3)

W = 6P m^3

Since we are not given any information about the type of gas or its properties, we cannot use the ideal gas law to calculate the pressure P. Therefore, we cannot determine the exact value of the work done on the system.

Learn more about Constant Pressure from given link

https://brainly.com/question/2139620

#SPJ1

The other plate of the capacitor is induced with an opposite charge through electrostatic induction as the particle of the flow approaches one plate.

As the particle of the flow approaches one plate of the capacitor, it induces an opposite charge on the other plate of the capacitor through the process of electrostatic induction. The electric field produced by the charge on the approaching plate pushes the electrons on the other plate away from the approaching plate, resulting in an accumulation of charge of the opposite sign on the other plate.

This process continues until the potential difference between the plates becomes large enough to produce a discharge, after which the process of electrostatic induction ceases. The discharge may occur in the form of a spark or a breakdown of the dielectric material separating the plates, depending on the strength of the electric field and the dielectric strength of the material.

Overall, the other plate of the capacitor experiences a temporary polarization and a buildup of charge of the opposite sign due to the approaching particle.

To know more about capacitor, refer here:

https://brainly.com/question/30889004#

#SPJ11

The correct statement about the relationship between the two forms of Newton's second law (Fnet = dp/dt and Fnet = m.a) is option D "Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.

Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. In other words, Fnet = m.a, where Fnet is the net force acting on an object, m is its mass, and a is its acceleration. This law can also be written as Fnet = dp/dt, where dp/dt is the rate of change of momentum with time.

Since momentum is the product of mass and velocity, it can be rewritten as dp/dt = m.dv/dt + v.dm/dt, where v is the velocity of the object. If the mass of the object remains constant over time, then v.dm/dt is zero and dp/dt reduces to m.dv/dt, which is equal to Fnet.

Therefore, Fnet = dp/dt reduces to Fnet = m.a if the object's acceleration does not change with time. If the momentum of the object does not change with time, then dp/dt is zero, and Fnet = dp/dt reduces to zero, which means that Fnet = m.a is also zero. Therefore, Fnet = m.a reduces to Fnet = dp/dt if the momentum of the object does not change with time.

To know more about Newton's second law:

https://brainly.com/question/13447525

#SPJ11

To produce a 24.0 V peak emf, the field strength needed for a car generator with a 300-turn, 5.05 by 8.2 cm rectangular coil rotating at 400 rpm when the engine is idling is 1.6 V/m.

Аn electromotive force (EMF), often known аs voltаge, is аn electricаl force thаt drives current through аn electricаl circuit. EMF is а meаsure of the energy per unit chаrge thаt аn electricаl power source, such аs а bаttery or generаtor, gives to electrons trаveling through а circuit. The symbol for EMF is E.

The mаgnetic field strength cаn be determined using the formulа:

= BΦ / А×N

where B represents the field strength, Φ represents the flux, А represents the аreа of the loop, аnd N represents the number of turns. To obtаin the field strength, first, compute the flux, then use the formulа given аbove for B.

This is mathematically expressed as:

B = E / (NAB)

Here,

E = 24.0 V

N = 300 turns

A = 5.05 cm × 8.2 cm = 41.41 cm²

= 0.004141 m

2BΦ / A × N = E/ NAB

⇒ Φ / A = E/ BN2A2BΦ = EN2ABΦ

= (24.0V)×2(300)(0.004141 m²)Φ

= 7.26 x [tex]10^{-4}[/tex] Wb

B = Φ / ANB = Φ / ANB = 7.26 x [tex]10^{-4}[/tex] Wb / 300(0.004141 m²)

B = 0.0762 T

Therefore, to produce a 24.0 V peak emf, the field strength required is 0.0762 T.

For more information about an electromotive force (EMF) refers to the link: https://brainly.com/question/24182555

#SPJ11

The current in the wire when a 0.900 V potential difference is maintained across a 1.50 m length of tungsten wire that has a cross-sectional area of 0.600 mm² can be calculated using Ohm's Law. The current through the wire is 0.643 A.

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship:

I = V/R

where:

I = V/RI = (0.9 V)/(R)

The resistivity of tungsten is given by 5.6 x 10⁻⁸ Ωm.The formula for the resistance of the wire is given by

The resistance of the wire is 1.4 Ω.I = V/RI = (0.9 V)/(1.4 Ω)

The current through the wire is 0.643 A.

Learn more about Ohm's Law: https://brainly.com/question/14296509

#SPJ11

The car's interior, like the Earth's, absorbs visible light and infrared radiation, then emits infrared radiation back out.

c. Visible light and infrared rays can enter the car through the windows. Similar to how visible light and infrared radiation can pass through our atmosphere. a. Similar to how a car's exterior reflects some incoming radiation, the polar ice caps do the same. b. Just like the Earth, the interior of the car collects visible light and infrared radiation before reemitting it. d. The automobile gets hotter since none of the radiation can get through the windows. Similar to how part of the radiation that the Earth emits is trapped in the atmosphere, global warming results.

Order correctly: Visible light and infrared radiation can enter the car through the windows.

Learn more about car here:

https://brainly.com/question/11733094

#SPJ4

The corresponding electric force on an electron near the surface of the earth is approximately 1.76 x 10^−19 N, while the gravitational force from the earth on the same electron is approximately 9.08 x 10^-30 N. This shows that the gravitational force is much weaker than the electric force.

To shield the electron from this force, one can use a Faraday cage, which is an enclosure made of conductive materials that can block external electric fields.

The cage works by redistributing the charges so that they cancel out the external electric field. In the case of a fluctuating electric field, the cage will continue to protect the electron as long as the field changes are not too rapid. For stronger or rapidly changing fields, other types of shielding may be necessary.

For more similar questions on gravitational force:

brainly.com/question/2598080

#SPJ11

The flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.

Since the cylinder's surface charge density is given by σ = k sin φ

Therefore, the total charge on the cylinder's curved surface

Q = σ(2πRL)

Where L is the height of the cylinder, Q = 2πRLk sin φ .

From Gauss's Law, the total flux through a closed surface surrounding a cylinder with height H and radius R is given by φ₀=Qε₀ .Here, ε₀ represents the vacuum permittivity. Now, substituting the value of Q, we get

φ₀ = (2πRLk sin φ)/ε₀

Therefore, the flux through any closed surface surrounding a cylinder with height H and radius R having surface charge density σ = k sin φ, where k is a constant, is φ₀=2πRLk sin φ/ε₀.

Learn more about flux and surface charge density at: https://brainly.com/question/29665619

#SPJ11

Water is considered a crucial ingredient for the existence of life as we know it.  It is a universal solvent that facilitates biochemical reactions, and its unique properties allow it to maintain a stable temperature range,

making it an ideal medium for the evolution of complex life forms.

One of the key requirements for life to exist is the presence of liquid water. Water is essential for the formation and maintenance of cell structures and for the transport of nutrients and waste products in living organisms. Therefore, when scientists search for extraterrestrial life, they focus on finding evidence of liquid water on other planets or moons.

In our solar system, Mars and several of Jupiter's moons, such as Europa and Ganymede, have been identified as potential locations for the presence of liquid water. Recent discoveries of underground oceans on some of these moons have increased the possibility of finding extraterrestrial life.

Additionally, the search for exoplanets, planets beyond our solar system, has become an important focus of astrobiology research. Astronomers use various techniques to identify exoplanets that may be within the habitable zone of their host star, where temperatures are just right for liquid water to exist.

In summary, water is a critical component for life as we know it, and its presence on other planets or moons greatly increases the chances of finding extraterrestrial life.

learn more about existence here

https://brainly.com/question/11081531

#SPJ4

In comparison to radio waves in a vacuum, visible light in a vacuum has wavelengths that are shorter.

It is because the wavelength of visible light ranges from about 400 to 700 nanometers (nm), while radio waves can have wavelengths of up to kilometers.

When any wave travels through a vacuum, it maintains a constant speed of 299,792,458 meters per second (m/s). But the wavelength and frequency are inversely proportional to each other, so as the frequency of the wave increases, its wavelength decreases, and vice versa.

Hence, visible light with a higher frequency has a shorter wavelength than radio waves, which have a much lower frequency. Thus, the wavelengths of visible light in a vacuum are shorter as compared to radio waves in a vacuum.

To know more about wavelengths, refer here:

https://brainly.com/question/13533093#

SPJ11#

The minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.

Using Malus' Law, determine the intensity of light transmitted through a polarizer that is rotated at an angle θ relative to the incident polarization of the light.

Malus' Law: I = I₀cos²θ, Where, I₀ is the initial intensity of the light and θ is the angle of rotation.

Calculate the light intensity transmitted through each polarizer.

I₀ = Intensity of polarized light incident on the first polarizer = 100% = 1

I = I₀ cos²19° = 0.818 I₀

I = I cos²19° = 0.667 I₀

I = I cos²19° = 0.544 I₀

I = I cos²19° = 0.443 I₀

I = 0.18 I₀, where I is the intensity of the transmitted light

Determine the minimum number of polarizers required.The transmitted light has an intensity of 18% of that striking the first polarizer. Since the intensity of transmitted light is reduced to 18% after the fourth polarizer, the minimum number of polarizers needed is 4.

Therefore, the minimum number of polarizers required to make the transmitted light through all the polarizing sheets have an intensity that is less than 18% of that striking the first polarizer is four.

Learn more about "polarizers" at : https://brainly.com/question/16106487

#SPJ11

The speed of the electron when it strikes the anode is vfinal = 2.6x107 m/s.

Vacuum tubes were often utilized in radios and other devices before the development of solid-state electronics. A diode is a straightforward sort of vacuum tube that simply consists of two electrodes enclosed in a highly evacuated space.

The cathode, one electrode, emits electrons from its surface while being kept at a high temperature.

The cathode and the opposite electrode, known as the anode, are kept at a potential difference of a few hundred volts, with the anode being at a greater potential.

An electron leaves the

cathode of a diode with a radius of 6.200x10⁻²cm and

an anode with a radius of 0.5580 cm, and

with a potential difference of 320 V.

The initial speed of the electron is 0 m/s.

The speed (vfinal) when it strikes the anode can be calculated using the equation vfinal = (2 × e × V)1/2,

where e is the electron charge (1.6x10⁻¹⁹C).

Therefore, the speed of the electron when it strikes the anode is

vfinal = (2 × 1.6x10⁻¹⁹ × 320)1/2 = 2.6x107 m/s.

To know more about Speed: https://brainly.com/question/13943409

#SPJ11

Answer:

Explanation:

The triboelectric effect (also known as triboelectric charging) is a type of contact electrification on which certain materials become electrically charged after they are separated from a different material with which they were in contact.

We always see the same side of the Moon because the "Moon rotates on its axis once for each revolution around Earth." Thus, the correct option will be B.

When the Moon rotates on its axis once for each revolution around Earth, then we always see the same side of the Moon. The reason behind this is that the moon's rotation takes almost the same time as it takes to orbit the Earth.

When the same side of the moon is facing the Earth, it appears to be unchanging. That is why we always see the same side of the moon from Earth. The other side of the Moon is known as the far side, which was first observed by the Soviet spacecraft Luna 3 in 1959.

Therefore, the correct option will be B.

Learn more about Moon here:

https://brainly.com/question/13538936

#SPJ11