Three 15-Ω and two 25-Ω light bulbs and a 24 V battery are connected in a series circuit. What is the current that passes through each bulb?
1) 0.18 A
2) 0.25 A
3) 0.51 A
4) 0.74 A
5) The current will be 1.6 A in the 15-Ω bulbs and 0.96 A in the 25-Ω bulbs.

Answer:

If efficiency is .22 then  W = .22 * Q   where Q is the heat input

Heat Input    Q = 2510 / .22 = 11,400 J

Heat rejected = 11.400 - 2510 = 8900  J of heat wasted

Also, 8900 J / (4.19 J / cal) = 2120 cal

An efficiency is the measure of productivity of an engine. The heat rejected by the engine is 8900 Joules.

An efficiency of a heat engine is the ratio of the work done and heat supplied.

Given is the automobile engine has the efficiency 22% and Work done is 2510 Joules.

The efficiency is written as,

η= W / Qs.

The work done is W= Qs - Qr, where Qr is the rejected heat.

The heat rejected can be represented as

Qr = W ( 1/η -1)

Substituting the value into the equation, we get the rejected heat.

Qr = 2510 (1/0.22 -1)

Qr = 8900 Joules.

Thus, the heat rejected by the engine is 8900 Joules.

Learn more about efficiency.

#SPJ2

Answer:

the natural length of the spring is 9 cm

Explanation:

let the natural length of the spring = L

For each of the work done, we set up an integral equation;

[tex]5.4 = \int\limits^{21-l}_{15-l} {kx} \, dx \\\\5.4 = [\frac{1}{2}kx^2 ]^{21-l}_{15-l}\\\\5.4 = \frac{k}{2} [(21-l)^2 - (15-l)^2]\\\\k = \frac{2(5.4)}{(21-l)^2 - (15-l)^2} \ \ \ -----(1)[/tex]

The second equation of work done is set up as follows;

[tex]9 = \int\limits^{27-l}_{21-l} {kx} \, dx \\\\9 = [\frac{1}{2}kx^2 ]^{27-l}_{21-l}\\\\9 = \frac{k}{2} [(27-l)^2 - (21-l)^2] \\\\k = \frac{2(9)}{(27-l)^2 - (21-l)^2} \ \ \ -----(2)[/tex]

solve equation (1) and equation (2) together;

[tex]\frac{2(9)}{(27-l)^2 - (21-l)^2} = \frac{2(5.4)}{(21-l)^2 - (15-l)^2}\\\\\frac{2(9)}{2(5.4)} = \frac{(27-l)^2 - (21-l)^2}{(21-l)^2 - (15-l)^2}\\\\\frac{9}{5.4} = \frac{(729 - 54l+ l^2) - (441-42l+ l^2)}{(441-42l+ l^2) - (225 -30l+ l^2)} \\\\\frac{9}{5.4 } = \frac{288-12l}{216-12l} \\\\\frac{9}{5.4 } =\frac{12}{12} (\frac{24-l}{18 -l})\\\\\frac{9}{5.4 } = \frac{24-l}{18 -l}\\\\9(18-l) = 5.4(24-l)\\\\162-9l = 129.6-5.4l\\\\162-129.6 = 9l - 5.4 l\\\\32.4 = 3.6 l\\\\l = \frac{32.4}{3.6} \\\\[/tex]

[tex]l = 9 \ cm[/tex]

Therefore, the natural length of the spring is 9 cm

Answer:

The frequency of the second wave is half of the frequency of first one.

Explanation:

The wavelength of the second wave is double is the first wave.

As we know that the frequency is inversely proportional to the wavelength of the velocity is same.

velocity = frequency x wavelength

So, the ratio of frequency of second wave to the first wave is

[tex]\frac{f_2}{f_1} =\frac{\lambda _1}{\lambda _2}\\\\\frac{f_2}{f_1} =\frac{\lambda _1}{2\lambda _1}\\\\\frac{f_2}{f_1} =\frac{1}{2}\\\\[/tex]

The frequency of the second wave is half of the frequency of first one.

Answer:

The weight of an object is the force on it caused by the gravity due to the planet. The weight of an object and the gravitational field strength are directly proportional. For a given mass, the greater the gravitational field strength of the planet, the greater its weight.

Weight can be calculated using the equation:

weight = mass × gravitational field strength

This is when:

weight (W) is measured in newtons (N)

mass (m) is measured in kilograms (kg)

gravitational field strength (g) is measured in newtons per kilogram (N/kg)

South

Explanation:

The magnetic force F on a point charge moving with a velocity v in the presence of a magnetic field B is given by

[tex]\vec{\textbf{F}} = q\vec{\textbf{v}}\textbf{×}\vec{\textbf{B}}[/tex]

and according to the right-hand rule, an upward magnetic force on a proton moving westward is only possible if the magnetic field is directed southward.

Answer:

b.have frequencies that are integer multiples of the frequency of the complex waveform

Explanation:

Please correct me if I am wrong

Answer:

The answer is "151.25 J and -547.64 J".

Explanation:

[tex]u = 0\\\\v = 2.35\ \frac{m}{sec}\\\\d = 5.0 \ m\\\\[/tex]

Using formula:

[tex]v^2 = u^2 + 2 \times a \times d\\\\2.35^2 = 0^2 + 2 \times a \times 5\\\\a = \frac{2.35^2}{10} \\\\[/tex]

   [tex]= 0.55 \ \frac{m}{sec^2}\\\\[/tex]

[tex]F_{net} = m \times a\\\\F_{net} = 55 \times 0.55 = 30.25\ N\\\\[/tex]

Calculating the Work by net force

[tex]W = F_{net}\times d\\\\W = 30.25 \times 5 = 151.25 \ J\\\\[/tex]

The above work is converted into thermal energy.

Now,

[tex]F_{net} = F_p - F_f\\\\F_p = 140 \ N\\\\F_f = u_k\times m \times g = u_k \times 55 \times 9.81\\\\F_f = 539.55 \times u_k\\\\30.25 = 140 - u_k \times 55 \times 9.81\\\\u_k = \frac{(140 - 30.25)}{(55\times 9.81)}\\\\uk = 0.203 = \text{Coefficient of friction}\\\\W_f = -F_f \times d\\\\W_f = -0.203 \times 55 \times 9.81 \times 5\\\\Work\ done\ by\ friction = -547.64 \ J[/tex]

Answer:

The correct answer is "[tex]4.49\times 10^{10} \ joules[/tex]".

Explanation:

According to the question,

The work will be:

⇒ [tex]Work=-\frac{kQq}{R}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (18-30)\times 3\times 0.2}[/tex]

              [tex]=-\frac{1}{4 \pi \varepsilon \times (-12)\times 3\times 0.2}[/tex]

              [tex]=\frac{0.3978}{\varepsilon }[/tex]

              [tex]=4.49\times 10^{10} \ joules[/tex]

Thus the above is the correct answer.    

We have that the workdone  is mathematically given as

W=4.49*10e10 J

From the question we are told

Generally the equation for the workdone   is mathematically given as

W=-kQq/R

Therefore

0.3978/ε0 =-1/(4πε0*(18-30)*3*0.2

Hence

For more information on Charge visit

https://brainly.com/question/9383604

Answer:

P = 6.63 kW

Explanation:

Given that,

Current, I = 260 A

Voltage of the battery, V = 25.5 V

We need to find the power supplied to the starter motor. We know that,

P = VI

Put all the values,

P = 25.5 × 260

P = 6630 W

or

P = 6.63 kW

So, the power supplied to the motor is 6.63 kW.

Answer:

The power is 6.63 kW.

Explanation:

Current, I = 260  A

Voltage, V = 25.5 V

Power of an electrical appliance is given by

P = V I

P = 25.5 x 260

P = 6630 W

1 kW = 1000 W

So, the power is

P = 6.63 kW

The total net force acting on the balloon will be 24498 Newtons

Given that

Volume of the balloon = 2210 cubic meter

Density of the air inside the balloon = 1.13  kg/m3

Here force on the balloon will be equal to the weight of the air displaced by balloon

[tex]F= mass of air displaced\times gravity[/tex]

[tex]F= Density \times volume \times gravity[/tex]

[tex]F=1.13 \times 2210 \times 9.81[/tex]

[tex]F=24498 N[/tex]

The total net force acting on the balloon will be 24498 Newtons

To know more about buoyancy force follow

https://brainly.com/question/117714

Answer:

elastic energy

Explanation:

When a gymnast falls on a trampoline from a height, after coming in contact with the trampoline, both the gymnast and the trampoline start to move down due to the elastic property of the trampoline.

During this stretching of the trampoline there comes a maximum point up to which the trampoline is stretched. At this point, both the kinetic energy and the gravitational potential energy of the gymnast are zero due to zero speed and zero height, respectively.

The only energy stored in the gymnast's body at this point is the elastic potential energy due to stretching of the trampoline. Hence,the correct option is:

elastic energy

Answer:

1. Number of dry cells of 1.5 V required is 40.

2. Number of internal resistance of 1 ohm required is 807

Explanation:

We'll begin by calculating the resistance. This can be obtained as follow:

Power (P) = 60 W

Voltage (V) = 220 V

Resistance (R) =?

P = V²/R

60 = 220² / R

Cross multiply

60 × R = 220²

60 × R = 48400

Divide both side by 60

R = 48400 / 60

R ≈ 807 Ohm

1. Determination of the number of dry cells of 1.5 V required.

Voltage (V) = 220

Dry Cells = 1.5 V

Number of dry cells (n) =?

n = Voltage / Dry cells

n = 60 / 1.5

n = 40

2. Determination of the number of internal resistance of 1 ohm required.

Resistance (R) = 807 Ohm

Internal resistance (r) = 1 ohm

Number of internal resistance (n) =?

n = R/r

n = 807 / 1

n = 807

SUMMARY:

1. Number of dry cells of 1.5 V required is 40.

2. Number of internal resistance of 1 ohm required is 807

Answer:

3

Explanation:

You must first make sure the equation is balanced. This one is. Then, you simply add up the coefficients of each compound on the products side of the equation. When the coefficient is not specified, you can assume it is 1 mole. So, in this equation, there is 1 mole of CaCl₂, 1 mole of CO₂, and 1 mole of H₂O = 3 moles.

The reactant side of the equation also has three moles:

1 mole of CaCO₃ and 2 moles of HCl.

Explanation:

Displacement of a body moving in circular motion is called uniform circular motion.

hope it is helpful to you

Answer:

A constantly moving object with consistent circular movement. However, for its change in direction, it is accelerating

Explanation:

Uniform circular motion in a circle at constant rate can be described as the motion of the object. When an object moves in a circle, it changes its direction constantly. The object moves tangently to the circle at all times. As the velocity vector direction is the same as the object motion direction, the velocity vector is tangent to the circle. This is shown in the animation on the right by a vector arrow.

An item is accelerating that moves in a circle. Objects that accelerate are subjects that change their speed – either the velocity (i.e. the vecteur magnitude) or the direction. An object with consistent circular movement moves at a constant speed. However, because of its change in direction, it is accelerating. The acceleration direction is inside. The animation on the right shows this through a vector arrow

For an object with only a uniform circular movement, the final motion is the net force. The The net force acting on this object is directed to the middle of the circle. The net force is an inner or centripetal force. Without such a deepest force, an object would continue in a straight direction, never deviating. Regrettably, with the inward net force, perpendicular to the vector, the object changes the direction and is accelerated internally.

Answer:

Wheel and axle

Explanation:

Which simple machine is shown in the diagram?

a wheel and axle

From the given diagram, the machine shown is actually a wheel and axle

Description of wheel and axle

The wheel and axle is a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.

Answer:

Wheel and axle

Explanation:

The question is incomplete. The complete question is :

A mass is attached to the end of a spring and set into oscillation on a horizontal frictionless surface by releasing it from a compressed position. The record of time is started when the oscillating mass first passes through the equilibrium position, and the position of the mass at any time is described by x = (4.7 cm)sin[(7.9 rad/s)πt].

Determine the following:

(a) frequency of the motion

(b) period of the motion

(c) amplitude of the motion

(d) first time after t = 0  that the object reaches the position x = 2.6 cm

Solution :

Given equation : x = (4.7 cm)sin[(7.9 rad/s)πt].

Comparing it with the general equation of simple harmonic motion,

 x = A sin (ωt + Φ)

  A = 4.7 cm

  ω = 7.9 π

a). Therefore, frequency, [tex]$f=\frac{\omega}{2 \pi}$[/tex]

                                             [tex]$=\frac{7.9 \pi}{2 \pi}$[/tex]

                                             = 3.95 Hz

b). The period, [tex]$T=\frac{1}{f}$[/tex]

                        [tex]$T=\frac{1}{3.95}[/tex]

                            = 0.253 seconds

c). Amplitude is A = 4.7 cm

d). We have,

    x = A sin (ωt + Φ)

    [tex]$x_t=4.7 \sin (7.9 \pi t)$[/tex]

    [tex]$2.6 = 4.7 \sin (7.9 \pi t)$[/tex]

     [tex]$\sin (7.9 \pi t) = \frac{26}{47}$[/tex]

     [tex]$7.9 \pi t = \sin^{-1}\left(\frac{26}{47}\right)$[/tex]

          Hence, t = 0.0236 seconds.

Answer:

angular acceleration.

Explanation:

Newton's law of universal gravitation states that the force of attraction (gravity) acting between the Earth and all physical objects is directly proportional to the Earth's mass, directly proportional to the physical object's mass and inversely proportional to the square of the distance separating the Earth's center and that physical object.

Generally, when a rigid body is made to rotate about a fixed axis, all the points in the body would typically have the same angular acceleration, angular displacement, and angular speed.

Answer:

Explanation:

Apply law of conservation of momentum along y-axis.

Initially there was no momentum along y-axis. So there will be nil momentum along y-axis again finally.

Let the mass of each piece after breaking be m .

Momentum of piece moving along positive y-axis

= m x 10 = 10m .

Let the component of velocity of third piece along y-axis be v .

Its momentum along the same direction = m v .

Total momentum along y -axis = 10 m + m v

According to law of conservation of momentum

10 m + mv = 0

v = - 10 m/s .

Component of velocity of the third piece along y-axis will be - 10 m/s .

In other words it will be along negative y-axis with speed of 10 m/s.

Answer:

Its the Federal government

Answer:

Xcm = (6 * 0 + 4 & 3 + 2 * 0) / 12 = 1

Ycm = (6 * 0 + 4 * 0 + 2 * 3) / 12 = 1/2

(Xcm , Ycm) = (1 , 1/2)

Using definition of center of mass

Answer:

By the principle of corona discharge.

Explanation:

The charge on each ball will decreases over time due to the electrical discharge in air.

According to the principle of corona discharge, when the curvature is small, the discharge of the charge takes placed form the pointed ends.

Complete question is;

A point charge is positioned in the center of a hollow metallic shell of radius R. During four experiments the value of point charge and charge of the shell were respectively:

+5q; 0

-6q; +2q

+2q; -3q

-4q; +12q

Rank the results of experiments according to the charge on the inner surface of the shell, most positive first:

a. 2, 3, 1, 4

b. 1, 2, 3, 4

c. 2, 4, 3, 1

d. 1, 3, 4, 2

Answer:

c. 2, 4, 3, 1

Explanation:

In this question, we can say that;

q_in = q_b

Where;

q_in is the charge on the inner surface of the shell

q_b is the point charge on the shell.

Thus q_in = -q_b was written because, as the shell is conducting, it means that the electric field would have a value of zero and thus the radius inside will be zero.

Thus;

- For +5q; 0:

q_in = -(+5q)

q_in = -5q

- For -6q; +2q :

q_in = - (-6q)

q_in = +6q

- For +2q; -3q :

q_in = -(+2q)

q_in = -2q

- For -4q; +12q:

q_in = -(-4q)

q_in = +4q

Ranking the most positive to the least positive ones, we have;

+6q, +4q, -2q, -5q

This corresponds to options;

2, 4, 3, 1

Answer:

Scalar quantity is the Physical quantity expresed only by their magnitude.

Answer:

(i)8m/s²(ii)40m/s

Explanation:

according to the formula

½at²=s.

then substituting the data

½a•5²=100

a=8m/s²

v=at=8•5=40m/s

Answer:

(I)

[tex]{ \bf{s = ut + \frac{1}{2} a {t}^{2} }} \\ 100 = (0 \times 5) + \frac{1}{2} \times a \times {5}^{2} \\ 200 = 25a \\ { \tt{acceleration = 8 \: m {s}^{ -2} }}[/tex]

(ii)

[tex]{ \bf{v = u + at}} \\ v = 0 + (8 \times 5) \\ { \tt{final \: velocity = 40 \: m {s}^{ - 1} }}[/tex]

Answer:

a= -80.357 m/s

Explanation:

use the formula

vf^2=vi^2+2a(xf-xi)

Plug in givens

0=(7.50)^2+2a(0.350m)

solve for acceleration

a= -80.357 m/s

Answer:

See explanation

Explanation:

a) maximum height of a projectile = u sin^2θ/2g

H= 600 × (sin 30)^2/2 × 10

H= 7.5 m

b) Time of flight

t= 2u sinθ/g

t= 2 × 600 sin 30/10

t= 60 seconds

Range

R= u^2sin2θ/g

R= (600)^2 × sin2(30)/10

R= 31.2 m

Answer:

17.07 kJ

Explanation:

The work done against gravity by the man W equals the potential energy change of the man and can of paint, ΔU

W = ΔU = mgΔy where m = mass of man and can of paint = 200 lb + 10 lb = 210 lb = 210 × 1 kg/2.205 lb, g = acceleration due to gravity = 9.8 m/s² and Δy = height of silo = 60 ft = 60 × 1m/3.28 ft

Since W = mgΔy, we substitute the values of the variables into the equation.

So,

W = mgΔy

W = 210 lb × 1 kg/2.205 lb × 9.8 m/s² × 60 ft × 1m/3.28 ft

W = 123480/7.2324 J

W = 17073.2 J

W = 17.0732 kJ

W ≅ 17.07 kJ

By the work-energy theorem, the total work done on the mass by the spring is equal to the change in the mass's kinetic energy:

W = ∆K

and the work done by a spring with constant k as it gets compressed a distance x is -1/2 kx ²; the work it does is negative because the restoring force of the spring points opposite the direction in which it's getting compressed.

So we have

-1/2 k (0.15 m)² = 0 - 1/2 (2.0 kg) (3.0 m/s)²

Solve for k to get k = 800 N/m.