"the time it takes a storage device to locate stored data and make it available for processing is called"

Answer:

Rainbow table attack

Explanation:

A rainbow table attack is a type of network attack or hacking where the hacker tries to utilize a rainbow hash table to crack the passwords in a database system. A rainbow table itself is a hash function used in cryptography for saving important data in a database. Especially passwords.

In this process, sensitive data are hashed two or multiple times with the same key or with different keys so as to avoid rainbow table attack. In a rainbow table attack, the hacker simply compares the hash of the original password against hashes stored in the rainbow table and when they find a match, they then identify the password used to create the hash.

Answer:

Following are the answer to this question:

Explanation:

As we know, that Python is based on Oop's language, it allows programmers to decide, whether method or classes satisfy the requirements.  

Answer:

Following are the explanation to this question:

Explanation:

In the various regulatory procedures were also simply corporate initiatives, as well as their analytical application by using the open standards users could even solve its problematic situation. It may not work forever, and it is some type of temporary fix.  

All such activities include the state or country-related problems only with the Global Information System results. Or in various countries police forces are different. All these price differences thus help the development of incorporation into one of GIS.

Answer:

1. Do some presentation preparation work

2. Set the right tone and end on a high note.

3. Create sleek and stylish slides.

4. Get your audience to focus.

5. Its all about you.

Explanation:

1. Do some presentation preparation work:

A good presentation begins, not with slides, but with a pencil and paper. Research your audience’s background, interests and capabilities. What do they already know, for instance, and what can they learn from you?

2. Set the right tone and end on a high note:

You have no more than 30 seconds to secure your audience’s attention. So, what attention-grabbing opener will you use?

Visual communications expert Curtis Newbold suggests “a fascinating quote; an alarming or surprising statistic; asking your audience a question; telling a relevant and funny joke… an imaginary scenario; or a demonstration''.

3. Create sleek and stylish slides:

Once you have your story down, you can start to design your slides.  

Before you do, it’s important to think about the practicalities. Will they, for instance, be displayed Widescreen with a 16:9 ratio? Or Standard with 4:3? This might seem like a small detail, but it can make a huge difference in terms of visual impact.

4.  Get your audience to focus:

The most important thing is to grab your audience’s attention straight away – and then maintain it! You want your audience to go away having learned something. So, make it as easy as possible for people to grasp your message “from the off”!

5.  Its all about you:

Finally, remember that, ultimately, it’s you that the audience should be paying attention to, not your slides!

PowerPoint can be used to create great visual aids, but the success of your presentation is determined by the way you deliver them. So, tell your story with a confident, compelling physical presence, and master it by rehearsing it 10 to 15 times.

Answer:

The teleautograph

Explanation:

The precursor to the present day fax machine was the analogue the telautograph. The device sends recorded potentiometer recorded electrical impulses to a pen to which is attached stepping motors such that a graphic inscription made by a sender is reproducible by the receiving system station. The teleautograph was the first device that was able to make such a transmission to a sheet of paper in a stationary state. simulation.

Answer:

Explanation:

Digital information All kinds of everyday technology also works using digital rather than analog technology. Cellphones, for example, transmit and receive calls by converting the sounds of a person's voice into numbers and then sending the numbers from one place to another in the form of radio waves.

Answer:

True

Explanation:

Due to the ever-changing cloud services, designing a sustainable cloud strategy is tough. Some factors that makes it look tough:

1. Choosing suitable cloud platforms that will be sustainable over a long period of time.

2. Availability of a cloud design specialist and experts: Getting a cloud specialist who can work out a sustainable design is tough itself.

Every corporate organization must take adequate caution when choosen a cloud design. This is to enable them have something sustainable as a result of the ever-changing cloud services.

Answer:

put quotations around the string

Explanation:

the animal name, koala, is of data type string and it should be enclosed in " "

delete the symbol

just put it into a processor like python idle

Answer:

Following are the program to this question:

val=input("")#defining val variable that inputs value

print('Hello',val,', we welcome you...')#defining print method, that print input value with the message

Output:

Pat

Hello Pat , we welcome you...

Explanation:

In the above given, python code a "val" variable, and the print that is inbuilt method is declared, inside the "val" variable the input method is used, which is used to input the value from the user side.

In the next line, the print method has declared, which is used to print the value with the message.

Answer:

PLANING

Explanation:

They include: planning, organizing, leading, and controlling. You should think about the four functions as a process, where each step builds on the others. Managers must first plan, then organize according to that plan, lead others to work towards the plan, and finally evaluate the effectiveness of the plan.

Answer:

This bios is to perform the access the Ram, video settings and modify settings.

Explanation:

This bios is to contain the section is to explain the motherboard are known as the Bios and to access the modify setting to the processor.

Answer:

Here is the function PrintSongsShorterThan() which prints all the songs from the album shorter than the value of the parameter songDuration.  

void Album::PrintSongsShorterThan(int songDuration) const {  //function that takes the songDuration as parameter  

unsigned int i;  

Song currSong;  

cout << "Songs shorter than " << songDuration << " seconds:" << endl;  

for(int i=0; i<albumSongs.size(); i++){    

currSong = albumSongs.at(i);    

if(currSong.GetDuration()<songDuration){    //checks if the song duration of the song from album is less than the value of songDuration  

currSong.PrintSong();     } } } //calls PrintSong method to print all the songs with less than the songDuration  

Explanation:

Lets say the songDuration is 210

I will explain the working of the for loop in the above function.

The loop has a variable i that is initialized to 0. The loop continues to execute until the value of i exceeds the albumSongs vector size. The albumSongs is a Song type vector and vector works just like a dynamic array to store sequences.  

At each iteration the for loop checks if the value of i is less than the size of albumSongs. If it is true then the statement inside the loop body execute. The at() is a vector function that is used to return a reference to the element at i-th position in the albumSongs.  

So the album song at the i-th index of albumSongs is assigned to the currSong. This currSong works as an instance. Next the if condition checks if that album song's duration is less than the specified value of songDuration. Here the method GetDuration() is used to return the value of duration of the song. If this condition evaluates to true then the printSong method is called using currSong object. The printSong() method has a statement cout << name << " - " << duration << endl; which prints/displays the name of the song with its duration.

The musicAlbum is the Album object to access the PrintSongsShorterThan(210) The value passed to this method is 210 which means this is the value of the songDuration.  

As we know that the parameter of PrintSongsShorterThan method is songDuration. So the duration of each song in albumSongs vector is checked by this function and if the song duration is less than 210 then the name of the song along with its duration is displayed on the output screen.  

For example if the album name is Anonymous and the songs name along with their duration are:  

ABC 400  

XYZ 123  

CDE 300    

GHI 200

KLM 100  

Then the above program displays the following output when the user types "quit" after entering the above information.  

Anonymous                                                  

Songs shorter than 210 seconds:                                                                         XYZ - 123                                                                                                              

GHI - 200                                                                                                              

KLM - 100  

Notice that the song name ABC and CDE are not displayed because they exceed the songDuration i.e. 210.

Answer:

Explanation:

Given code:-

#include<iostream>

using namespace std; //namespace

#define RED "\033[31m" /* Red */

#define BLUE "\033[34m" /* Blue */ //color definition

#define WHITE "\033[37m" /* White */

void mergeArrays(int arr1[], int arr2[], int n1, int n2, int arr3[])

//merger sort

{

int i = 0, j = 0, k = 0;

while (i<n1 && j <n2) //iterate over both array

{

if (arr1[i] < arr2[j]) //iff array 1 element is larger

{

arr3[k] = arr1[i]; //assign to a3

k++;

i++;

}

else

{

arr3[k] = arr2[j]; //else assign array 2 to a3

j++;

k++;

}

}

//say the array turns out to br of different sizes

//let us copy the remaining elemnt to array 3

while (i < n1)

{

arr3[k] = arr1[i];

i++;

k++;

}

while (j < n2)

{

arr3[k] = arr2[j];

k++;

j++;

}

}

int main(){

int A[4] = {3,5,7,9}; //array 1 assignment

int a_size = 4;

int b_size = 6;

int B[6] = {1,3,7,9,13,25}; //array 2 assignment

int C[10]; //array 3 declearation

int a_count = 0;

int b_count = 0; //counter for both array index

mergeArrays(A,B,a_size,b_size,C); //merger function applied;

cout<<WHITE<<"A: ";

for(int i = 0; i<4; i++){

cout<<RED<<A[i]<<" ";

}

cout<<endl<<WHITE<<"B: ";

for(int i = 0; i<6; i++){

cout<<BLUE<<B[i]<<" ";

}

cout<<endl<<WHITE<<"C: ";

for(int i = 0; i<10; i++){ //iterate over C

if(C[i] == A[a_count] && a_count < a_size){

cout<<RED<<C[i]<<" ";

// if element is common in array 1 print in red

a_count++;

}

else if (C[i] == B[b_count] && b_count < b_size){

//say element was similar in array 2,  print in blue

cout<<BLUE<<C[i]<<" ";

b_count++;

}

}

cout<<endl;

}

Answer:

public PhonePlan(int numMinutes, int numMessages) {

        freeMinutes = numMinutes;

        freeMessages = numMessages;

    }

Explanation:

Create a constructor that takes two parameters, numMinutes and numMessages

Inside the constructor, set numMinutes to freeMinutes and numMessages to freeMessages.

With this constructor, we are able to create PhonePlan objects that take parameters and different options as seen in the output. We can set any values for minutes and messages in the constructor.

Answer:

PhonePlan::PhonePlan(int numMinutes, int numMessages) {

freeMinutes = numMinutes;

freeMessages = numMessages;

}

Explanation: For C++

PhonePlan::PhonePlan(int numMinutes, int numMessages) {

^^^^^^^^^^^^

you need that

freeMinutes = numMinutes;

freeMessages = numMessages;

}

Answer:

hello the options to your question is incomplete below are the options

A.   Linear probing causes secondary collisions.

B.   Higher space utilization tends to cause more collisions.

C.    Chained entries will be ordered by key.

D.   (a) and (b).

E.    All of the above.

answer : (a) and (b) --- D

Explanation:

The true statements about collisions in hashing are ;Linear probing causes secondary collisions and Higher space utilization tends to cause more collisions.

collisions in hashing is when two data sets whom are distinctively different have the same hash value or checksum. the collision in hashing can be resolved by checking  the hash table for an open slot to keep the data set that caused the collision.

Answer:

They can always be easily promoted to named tuples. Likewise, if the collection is going to be iterated over, I prefer a list. If it's just a container to hold multiple objects as one, I prefer a tuple. The first thing you need to decide is whether the data structure needs to be mutable or not

Answer: provided below

Explanation:

The code is provided below/

// the method to add all double value in the string

double AddAll(const char *str)

{

double total = 0;

vector<string> vec;

stringstream strStream(str);

while (strStream.good())

{

string substr;

getline(strStream, substr, ';');

vec.push_back(substr);

}

for (size_t i = 0; i < vec.size(); i++)

{

total = total + stod(vec[i]);

}

return total;

}

Program code with addition of the above for testing is provided thus

#include <iostream>

#include <sstream>

#include <vector>

using namespace std;

//addin all double value in syring

double AddAll(const char *str)

{

double total = 0;

vector<string> vec;

stringstream strStream(str);

while (strStream.good())

{

string substr;

getline(strStream, substr, ';');

vec.push_back(substr);

}

for (size_t i = 0; i < vec.size(); i++)

{

total = total + stod(vec[i]);

}

return total;

}

int main()

{

//method calling and display result

cout<<AddAll("1.245;2.9");

}

This gives output as:

4.145

Answer:

All computers perform disk optimization utilizing the same software.

Answer:

supervised learning

Explanation:

This process is known as supervised learning. This refers to the machine learning task of learning a function that maps an input to an output based on example input-output pairs. In other words, by teaching it a single process it is able to repeat and predict the same process or predict the output based on the inputs that are being implemented by referring to the initially learned function.

Answer:

Explanation:

Take note to avoid Indentation mistake which would lead to error message.

So let us begin by;

import java.util.*; ------ using Java as our programming language

class Mutation {

public static boolean alternatingSort(int n , int[] a)

{

int []b = new int[n];

b[0]=a[0];

int j=1,k=0;

for(int i=1;i<n;i++)

{

if(i%2==1)

{

b[i]=a[n-j];

j++;

}

else

b[i]=a[++k];

}

for(int i=0;i<n;i++)

      {

      System.out.print(b[i]+" ");

      }

      System.out.print("\n");

for(int i=1;i<n;i++)

      {

      if(b[i]<=b[i-1])

      return false ;

      }

return true;

}

  public static void main (String[] args) {

      Scanner sc = new Scanner(System.in);

      int n= sc.nextInt();

      int []a = new int [n];

      for(int i=0;i<n;i++)

      a[i]=sc.nextInt();

      System.out.println(alternatingSort(n,a));

  }

}

This code should give you the desired result (output).

The program is an illustration of Arrays.

Arrays are variables that are used to hold multiple values using one variable name

The program in Java, where comments are used to explain each line is as follows:

import java.util.Scanner;

public class Main {

//This defines the alternatingSort function

public static boolean alternatingSort(int n , int[] a){

   //This creates an array b

   int b[] = new int[a.length];

   //This populates the first element of array b

   b[0]=a[0];

   //This initializes two counter variables

   int count1 =1,count2 = 0;

   //This iterates from 1 to n - 1

   for(int i=1;i<a.length;i++){

       //This populates array b for odd indices

       if(i%2==1){

           b[i]=a[n-count1];

           count1++;

       }

       //This populates array b for even indices

       else{

           b[i]=a[++count2];

       }

   }

   //This iterates from 0 to n - 1

   for(int i=0;i<a.length;i++){

       //This prints the elements of array b

       System.out.print(b[i]+" ");

   }

   //This prints a new line

   System.out.println();

   //This iterates from 1 to n - 1

   for(int i=1;i<a.length;i++){

       //This checks if the elements of array b are strictly in ascending order

       if(b[i]<=b[i-1]){

           return false ;

       }

     }

     return true;

}

//The main function begins hers

 public static void main (String[] args) {

     //This creates a Scanner object

     Scanner input = new Scanner(System.in);

     //This gets input for the length of the array

     int n= input.nextInt();

     //This creates the array a

     int a[] = new int [n];

     //The following iteration populates array a

     for(int i=0;i<n;i++){

         a[i]=input.nextInt();

     }

     //This calls the alternatingSort function

     System.out.println(alternatingSort(n,a));

 }

}

Read more about arrays at:

https://brainly.com/question/15683939

Answer:

Session hijacking

Explanation:

Session hijacking : Session hijacking is an attack where a user session is taken over by an attacker. A session starts when you log into a service, for example your banking application, and ends when you log out.

Answer:

The Enforce Password History and Minimum Password Age works together by preventing a person from changing the password many times and using an old password.

Explanation:

Minimum Password Age works to stop a user from modifying an existing password numerous times so that it will bypass enforce password history and asked to reset the password.

The Enforce Password History policy works to prevent a user from making use of an old password by setting limits on the number of remembered passwords. This helps users from using old and easily guessed passwords which can leave them vulnerable to network attacks.

Answer:

an algorithm (pronounced AL-go-rith-um) is a procedure or formula for solving a problem, based on conducting a sequence of specified actions. A computer program can be viewed as an elaborate algorithm. In mathematics and computer science, an algorithm usually means a small procedure that solves a recurrent problem.

Answer:

a process or set of rules to be followed in calculations or other problem-solving operations, especially by a computer.

Explanation:

The utility that allows the technician to correct this issue is system restoration. The correct option is A.

System Restore is a tool for safeguarding and repairing computer software. System Restore creates Restore Points by taking a “snapshot” of some system files and the Windows registry.

Type recovery into the Control Panel search box. Choose Recovery > System Restore. Select Next in the Restore system files and settings window. Select the desired restore point from the list of results, and then click Scan for affected programs.

The Restore Process copies data from a source (one or more Archive files) to a destination (one or more tables in a database). A Restore Process consists of two phases. First, identify one or more Archive Files containing the data to be recovered and choose the desired data.

Therefore, the correct option is A. System Restore.

To learn more about system restoration, refer to the link:

https://brainly.com/question/27960518

#SPJ5

Answer:

The application should have a form user interface to submit input, the input is used to query a database, if the input matches a row in the database, the value is displayed in the application.

Explanation:

The data structure in the database for the dictionary application should be a dictionary, with the input from the user as the key and the returned data as the value of the dictionary.

The dictionary application should have a user interface form that submits a query to the database and dictionary data structure returns its value to the application to the user screen.

Answer: to  vibe the rest

Explanation:

Answer:

True

Explanation:

High-level languages such as Java, C++, Ruby, Python, etc need to be translated into binary code so a computer can understand it, compile and execute them.

Machine language is the only language that is directly understood by the computer because it is written in binary code. But writing codes in Machine Language is tiring, tedious, and obsolete as no one really uses it anymore.

Answer:

True

Explanation:

FLVS intro to Programming honors

Answer:

Integrity

Explanation:

In CAIN, integrity is realized through the use of message digest functions and hashes.

Integrity in CAIN simply means securing a message on transit without it being tampered. To accomplish and achieve integrity, hash functions are used. These hash functions receive arbitrary length message and bring out a fixed sized message digest.

The message digest and hash function maps input data of arbitrary length to an output fixed data length. Hashing is used to guarantee integrity.

Hope this helps you! :)

The ans is A which is TRUE

(Was a tricky ques for some but... u gotta learn it!)

PLS MARK AS BRAINLIEST!

Processors for most mobile devices run at a slower speed than a processor in a desktop PC, therefore, the statement is true.

In conclusion, once there's a limitation of the speed, there's a slower performance of the mobile phone.

Read related link on:

https://brainly.com/question/614196

Answer:

screening

Explanation:

Packet screening also known as packet filtering wall is a package that works at the network layer of the OSI model. It screens IP addresses and packet options and its firewall option allows it to block or allow access into the computer, based on what it has detected.

To achieve this, it can employ the dynamic-packet filtering where ports are opened when it is really necessary and then closed. Static-packet filtering in which rules are set manually and the  stateful-paket filtering where packets have to move through some sequence.

Answer:

A. 0

Explanation:

RAID level zero refers to disk arrays with striping at the level of blocks, but without any redundancy.

RAID ZERO (disk striping) : This is the process of dividing a body of data into blocks and also spreading the data blocks across multiple storage devices, such as hard disks or solid-state drives (SSDs), in a redundant array of independent disks (RAID) group.