Answer:
Option C
Explanation:
C. Convection...
The phrase 'hot air rises'describe the convection as a type of heat transfer therefore the correct answer is option C.
It is the type of heat transfer in which the heat is transferred from the bulk motion of the particles of liquid and gases due to the presence of temperature gradient.
The hot air rises is one of the best example of convection currents
The boiling water is also an example of convection heat transfer process in which the hot water rises to the top of the surface due to the bulk molecular movement of convection current .
The hot air rides is the bulk movement of the gas molecules because of the presence of the temperature gradients resulting in the varied density of air ,the hot air rising to the surface have less density as compared to the air settling near the surface ,the convection current phenomenon is responsible for the phrase "hot air rises" ,therefore the correct option is the option C.
Learn more about convection from here
https://brainly.com/question/16635311
#SPJ2
Part C
When only one color of light reflects from a piece of paper, what happens to the other colors of light?
Remember that light is energy, and energy cannot be created or destroyed.
В І ох
х
Font Sizes
A
EEEE
I
Characters used: 0 / 15000
Plz help me yall I’m struggling
Answer:
the other colours get absorbed by the paper
Answer:
The other colors are absorbed by the paper and not reflected.
The only variable we found that affects the speed of a wave on a string was the tension of the string. How does this relate to how a musician tunes a stringed instrument?
Answer:
We know that in a string with two fixed points (like the one you will find in a guitar, where the string is "fixed" at the bridge and at the nut) the only thing that defines the speed (the frequency) at which the string vibrates is the tension (the length is also important, but for the 6 strings in the guitar all of them have the same length, but, as you know, when you press in a given fret the note changes, this happens because you are changing the length of the string, finally, the mass of the string is also important, but all the strings have almost the same mass, so we can ignore this).
Then for the open notes (the notes that you play when you don't fret any note) the only thing that defines the note that will sound is the tension of the string.
And a musician can tune the stringed instrument by changing the tension of each string using a tuner, which is the mechanism in the headstock of the instrument). As more tense is the string, higher will be the open note.
Which of the following statements is false?
Weight is a vector quantity
Weight is measured in newtons. N
The weight of an object is the same on the Earth and the moon
Answer:
the weight of an object is the same on earth and moon
Explanation:
bcoz weight depends on both mass and gravity
since the gravity of earth and moon is different then the weight is also different
mass doesn't change not weight
What is the "best" explanation for why the universe is the way it is?
A) god created the universe
B) there is a multiverse and this one happens to be perfect for life.
C) this is the only universe and it happens to be perfect for life.
D) It is all in illusion and none of it exists.
E) none of the above, they are all just guesses.
I know the answer I just wanna see what you guys think.
i will give brainly if you get it right.
If distance between two charges increased by 2 times then force
Explanation:
The size of the force varies inversely as the square of the distance between the two charges. Therefore, if the distance between the two charges is doubled, the attraction or repulsion becomes weaker, decreasing to one-fourth of the original value.
(a) From an atomic point of view, why do you have to heat a solid to melt it? (b) If you have a solid and a liquid at room temperature, what conclusion can you draw about the relative strengths of their inter-atomic forces?
Answer:
A. & B. Heat energy is needed to convert solid into a liquid because heat energy increases the kinetic energy of the particles. The heat energy that it used to change 1 kg of solid into liquid at atmospheric pressure and at its melting point is called the latent heat of fusion.
the minimum charge on any object cannot be less than
Answer:
1.6 x 10^{-19} Coulombs
Explanation:
In Physics, the standard unit of measurement of a charge is Coulombs and it's denoted by C. Also, the symbol for denoting a charge is Q.
In Chemistry, electrons can be defined as subatomic particles that are negatively charged and as such has a magnitude of -1.
The minimum charge on any object such as an electron cannot be less than 1.6 x 10^{-19} Coulombs and it's usually referred to as the fundamental unit of charge.
The unit of distance used in astronomy is the light year, defined as the distance travelled by light in one calender year. How far away from earth (in km) is a star if its distance is quoted as 10 light years?
Answer:
9.7 trillion kilometers
Explanation:
A meter stick has a mass of 0.30 kg and balances at its center. When a small chain is suspended from one end, the balance point moves 28.0 cm toward the end with the chain. Determine the mass of the chain.
Answer:
M L1 = m L2 torques must be zero around the fulcrum
M = m L2 / L1 = .3 kg * 28 cm / 22 cm = .382 kg
Give a quantitative definition of being in contact.
Two things are said to be in contact if the smallest distance between a point in one of them and a point in the other one is zero.
Which method of powering a vehiclewill help to reduce air pollution
using oil
using biofuels
using gasoline
using diesel fuel
Answer:
Using biofuels
Explanation:
The emissions of NOx and total VOCs lead to the formation of ozone in the troposphere, the main component of smog. ... Biofuels has a number of health and environmental benefits including improvement in air quality by reducing pollutant gas emissions relative to fossil fuels
A child is playing in a park on a rotating cylinder of radius, r , is set in rotation at an angular speed of w. The Base of the cylinder is slowly moved away, leasing the child suspended against the wall in a vertical position.
What Is the minimum coefficient of friction between the child's clothing and wall is needed to prevent it from falling .
Answer:
[tex]\mathbf{\mu_s = \dfrac{g}{\omega^2r}}[/tex]
Explanation:
From the given information:
The force applied to the child should be at equilibrium in order to maintain him vertically hung on the wall.
Also, the frictional force acting on the child against gravitational pull is:
[tex]F_f = \mu _sN[/tex]
where,
the centripetal force [tex]F_c[/tex] acting outward on the child is equal to the normal force.
[tex]F_c= N[/tex]
SO,
[tex]F_f = \mu_s F_c[/tex]
Since the centripetal force [tex]F_c = \dfrac{mv^2}{r}[/tex]
Then:
[tex]F_f = \dfrac{ \mu_s \times mv^2}{r}[/tex]
Using Newton's law, the frictional force must be equal to the weight
[tex]F_f = W[/tex]
[tex]\dfrac{ \mu_s \times mv^2}{r} = mg[/tex]
[tex]\dfrac{ \mu_s v^2}{r} = g[/tex]
Recall that:
The angular speed [tex]\omega = \dfrac{v}{r}[/tex]
Therefore;
[tex]g = \mu_s \omega^2 r[/tex]
Making the coefficient of friction [tex]\mu_s[/tex] the subject of the formula:
[tex]\mathbf{\mu_s = \dfrac{g}{\omega^2r}}[/tex]
Atoms of which two elements could combine with atoms of chromium (Cr) to
form ionic bonds?
O A. F.
B. Au
C. Se
D. Ti
E. Mg
Answer:
D and E
Ionic bonds are formed between metals and non-metals and both of those are metals
An airplane flies between two points on the ground that are 500 km apart. The destination is directly north of the point of origin of the flight. The plane flies with an airspeed of 120 m/s. If a constant wind blows at 10 m/s toward the west during the flight, what direction must the plane fly relative to the air to arrive at the destination
Answer:
The right solution is "4.8° east of north".
Explanation:
Given:
Distance,
= 500 km
Speed,
[tex]\vec{v}=120 \ m/s[/tex]
Wind (towards west),
[tex]v_0=10 \ m/s[/tex]
According to the question, we get
The angle will be:
⇒ [tex]\Theta=Cos^{-1}(\frac{v_0}{v_1} )[/tex]
[tex]=Cos^{-1}(\frac{10}{120} )[/tex]
[tex]=85.21[/tex] (north of east)
hence,
The direction must be:
⇒ [tex]\Theta'=90-85.21[/tex]
[tex]=4.79^{\circ}[/tex]
or,
[tex]=4.8^{\circ}[/tex] (east of north)
Find the X and Y components of the following:
A. 35 m/s at 57q from the x-axis.
Explanation:
Given that,
35 m/s at 57° from the x-axis.
Speed, v = 35 m/s
Angle, θ = 57°
Horizontal component,
[tex]v_x=v\cos\theta\\\\=35\times \cos(57)\\\\=19.06 m/s[/tex]
Vertical component,
[tex]v_y=v\sin\theta\\\\v_y=35\times \sin(57)\\\\=29.35\ m/s[/tex]
Hence, this is the required solution.
state what is meant by graviration potential at a point in an orbit 6.5×10^7
Explanation:
The gravitational potential at a point in a gravitational field is the work done per unit mass that would have to be done by some externally applied force to bring a massive object to that point from some defined position of zero potential,
Newton's Second Law of Motion
14. Why was it necessary to transfer mass from the cart to the hanger rather than just
simply adding mass to the hanger?
Answer:
The weight of the hanging mass provides tension in the string, which helps to accelerate the cart along the track. A small frictional force will resist this motion.
What is the efficiency of a ramp that is 5.5 m long when used to move a 66 kg object to a height of 110 cm when the object is pushed by a 150 N force .
Answer and I will give you brainiliest
Explanation:
Energy input = F×d = (150 N)(5.5 m) = 825 J
Energy output = mgh = (66 kg)(9.8 m/s^2)(1.10 m) = 711 J
efficiency = [tex]\dfrac{\text{output}}{\text{input}}[/tex]×100% = 86.2%
How does the density of water change when: (a) it is heated from 0o
C to
4o
C; (b) it is heated from 4o
C to 10o
C ?
Answer:
[b] it id heated from 4o
Explanation:
Rank the six combinations of electric charges on the basis of the electric force acting on q1.
a.
q1 = -1nC
q2= +1nC
q3= +1nC
b.
q1 = -1nC
q2= -1nC
q3= -1nC
c.
q1 = +1nC
q2= +1nC
q3= -1nC
d.
q1 = +1nC
q2= -1nC
q3= +1nC
. If force (F), work (W) and velocity (v) are taken as fundamental quantities.
What is the dimensional formula of time (T)?
Answer:
∴ [T]=[WF−1V−1]
Hope this answer is right!!
Answer :
[T] = [W(F)^-1(V)^-1]
I was reading an old thermodynamics textbook and came across this equation describing change in internal energy. What does the (dU/dT)V and (dU/dV)T mean? I think it’s partial derivatives, but I’ve never seen a derivative sub (something). Please help
Explanation:
I remember that notation! The expression
[tex]dQ = dU = (\dfrac{\partial U}{\partial T})_{V} dT+ (\dfrac{\partial U}{\partial V})_{T}dV[/tex]
is the 1st law of thermodynamics and it refers to the heat supplied to the system dQ which is also a change in its internal energy dU. The first term is the partial derivative of the internal energy U with respect to temperature T while the volume V is kept constant, as denoted by the subscript V. The 2nd term is similar but this time, temperature is kept constant while its volume partial derivative is being taken.
Ah, memories!
Kinematics equations tells us the position of an object under constant acceleration increases linearly with time.
A. True
B. False
Answer:
False.
Explanation:
Suppose that we have an object that moves with constant acceleration A.
Then the acceleration of the object is defined by the equation:
a(t) = A
The acceleration is the rate of change of the velocity, then the velocity equation is given by the integration of the acceleration equation, we will get:
v(t) = A*t + V₀
Where V₀ is the velocity of the object at the time t = 0s.
Now, if we integrate it again, we will get the position equation:
p(t) = (1/2)*A*t^2 + V₀*t + P₀
Where P₀ is the initial position equation.
Here, we can see that the position equation is a quadratic equation (not a linear equation), then the statement is false.
what is the main limitation of debye huckel theory
Answer:
Explanation:
For very low values of the ionic strength the value of the denominator in the expression above becomes nearly equal to one. In this situation the mean activity coefficient is proportional to the square root of the ionic strength. This is known as the Debye–Hückel limiting law.
A peach pie in a 9.00 in diameter plate is placed upon a rotating tray. Then, the tray is rotated such that the rim of the pie plate moves through a distance of 208 in. Express the angular distance that the pie plate has moved through in revolutions, radians, and degrees.
Answer:
a) [tex]X_1=7.36rev[/tex]
b) [tex]X_2=46.22radians[/tex]
c) [tex]X_3=2649.6^o[/tex]
Explanation:
From the question we are told that:
Diameter [tex]d=9.00[/tex]
Distance [tex]x=208[/tex]
Generally the equation for circumference of a circle is mathematically given by
[tex]C=2 \pi r\\\\C=2*\pi*4.5[/tex]
[tex]C=28.3[/tex]
Therefore
Angular distance that the pie plate has moved through in revolutions is
[tex]X_1=\frac{x}{C}[/tex]
[tex]X_1=\frac{208}{28.3}[/tex]
[tex]X_1=7.36rev[/tex]
Generally Angular distance that the pie plate has moved through in radians is
[tex]X_2= 7.36rev* 2 \pi[/tex]
[tex]X_2=46.22radians[/tex]
Generally Angular distance that the pie plate has moved through in degrees is
[tex]X_3=7.36rev* 360[/tex]
[tex]X_3=2649.6^o[/tex]
In an experiment to measure the value of pi, the following results are obtained for pi:
3.14 3.11 3.20 3.06 3.08
a) Calculate the Mean Value.
b) Calculate the Average Deviation from the Mean
c) Calculate the: True Standard Deviation
d) Calculate the: Standard Deviation of the Mean.
e) If the correct value is 3.14159, calculate the: Percent Error
Answer:
a)[tex]MV=3.118[/tex]
b)[tex]AD=0.0416[/tex]
c)[tex]TSD=0.00302[/tex]
d)[tex]SD=0.00242[/tex]
e)[tex]%E=0.75%[/tex][tex]PE=0.75\%[/tex]
Explanation:
a)
The mean value equation is:
[tex]MV=\frac{\Sum x}{n}[/tex]
Where:
x represents the values of pin is the number of pi values[tex]MV=\frac{3.14+3.11+3.20+3.06+3.08}{5}[/tex]
[tex]MV=3.118[/tex]
b)
The average deviation equations is:
[tex]AD=\frac{\Sum |x-MV|}{n}[/tex]
[tex]AD=\frac{0.208}{5}[/tex]
[tex]AD=0.0416[/tex]
c)
The true Standard Deviation equation is:
[tex]TSD=\sqrt{\frac{\Sum (x-MV)^{2}}{n-1}}[/tex]
[tex]TSD=\sqrt{\frac{0.01208}{5-1}}[/tex]
[tex]TSD=0.00302[/tex]
d)
The Standard Deviation equation is:
[tex]TSD=\sqrt{\frac{\Sum (x-MV)^{2}}{n}}[/tex]
[tex]TSD=\sqrt{\frac{0.01208}{5}}[/tex]
[tex]SD=0.00242[/tex]
e)
The percent error equation is:
[tex]%E=\frac{|Measured value - True value|}{|True value|}[/tex][tex]PE=\frac{|Measured value - True value|}{True value}[/tex]
[tex]%E=\frac{|Measured value - True value|}{|True value|}[/tex][tex]PE=\frac{|3.118-3.14159|}{3.14159}*100[/tex]
[tex]%E=\frac{|Measured value - True value|}{|True value|}[/tex][tex]PE=0.75\%[/tex]
[tex]%E=0.75%[/tex]
I hope it helps you!
4. Water stands 12.0 m deep in a storage tank whose top is open to the atmosphere at
1.00 atm. The density of water is given as 1000 kg/m² and some pressure conversion
are 1 Pa = 1 N/m² while 1 atm = 101 325 Pa.
a) What is the absolute pressure at the bottom of the tank?
b) What is the gauge pressure at the bottom of the tank?
[4]
[4]
Answer:
[tex]P=217600Pa[/tex]
Explanation:
From the question we are told that:
Density [tex]\rho=1000kg/m^3[/tex]
Depth of Water [tex]d=12.0m[/tex]
Generally the equation for Pressure is mathematically given by
[tex]P=\rho gh[/tex]
[tex]P=1000*9.8*12[/tex]
[tex]P=117600N/m^2[/tex]
Therefore
Absolute Pressure=P+P'
Where
P=Pressure under water
P'=Atmospheric Pressure
Therefore
[tex]P_A=P+P'[/tex]
[tex]P_A=117,600+10^5[/tex]
[tex]P=217600Pa[/tex]
Một học sinh làm thí nghiệm sóng dừng trên dây cao su dài L với hai đầu A và B cố định . Xét điểm M trên dây sao cho khi sợi dây duỗi thẳng thì M cách B một khoảng a < L/2 . Khi tần số sóng là f = f1 = 60 Hz thì trên dây có sóng dừng và lúc này M là một điểm bụng . Tiếp tục tăng dần tần số thì lần tiếp theo có sóng dừng ứng với f = f2=72 Hz và lúc này M không phải là điểm bụng cũng không phải điểm nút . Thay đổi tần số trong phạm vi từ 73 Hz đến 180 Hz , người ta nhận thấy với f = fo thì trên dây có sóng dừng và lúc này M là điểm nút . Lúc đó , tính từ B ( không tính nút tại B ) thì M có thể là nút thứ ?
THE ANSWER!!! Please
Answer:
I think -7 N. Netforce is 3N-10N= -7N
Explanation:
If the car falls down the side of the cliff, what is happening to the gravitational potential energy of the falling car? (Assume the bottom of the cliff is zero)
Answer:
Sentences with many clauses and phrases are difficult to understand because the clauses and phrases typically _____.
modify other clauses and phrases in the sentence
refer to other sentences in the passage
make it hard to determine where the sentence ends
change the intended meaning of the sentence
Explanation: