the materials that made up the solar nebula can be categorized into these four general types. rank these materials from left to right based on the temperature at which each would condense into a solid, from highest to lowest. note: for a substance that does not condense at all, rank it as very low temperature.- Rock
- Hydrogen and Helium Gas
- Metals
- Hydrogen Compounds

Two parallel conducting plates are charged with equal and opposite charges. Then the correct statement about the magnitude of the electric potential is greater at point B.

Here electric field exists between the positive and negative plates. Its direction will be from the positive plate to the negative plate. The electrostatic potential is the work done in moving a unit charge in the electric field. The relationship between the electric field and electric potential is electric field is the negative gradient of electric potential.

E = -dV/dr

V = -∫E.dr

E.dr = E×dr×cos(theta)

Here on moving from the positive plate to the negative plate Electric field and distance are in the same direction.

Hence the value of the angle theta between them will be 0 degrees. Then we will potential as negative. That is on moving from the positive plate to the negative plate potential decreases. So, point B near the positive plate is having higher potential compared to others.

Point A is outside the plates where the electric field and hence potential is zero.

This question is accompanied by an image and Option B is the correct one.

Learn more about the electric potential at https://brainly.com/question/26978411

#SPJ4

A ball is thrown horizontally from a 95 m-high building's highest point and landing 125 m from the building's base. Use a coordinate and disregard air resistance.

What does the word "resistance" mean?

Describe resistance. Electrical | January 12, 2021 The obstruction to part of the electrical circuit is measured by resistance. The Greek letter beta () represents the unit of measurement for resistance, known as ohms. Georg Simon Ohm (1784–1854), a German physicist that investigated the connection between voltage, current, and resistance, is the name given to the unit of resistance.

What is a circuit's electrical resistance?

The relationship between the induced voltage and the current that flows through a circuit determines its electrical resistance. Ohms is the symbol for electrical resistance. Some materials permit the flow of electric charge more easily than others. The electrical resistance gauges how much the circuit restricts the flow of the this electric charge.

To know more about resistance visit:

https://brainly.com/question/11431009

#SPJ4

The structure of the given paragraph about Ernest Cline is sequence writing.

The correct option is B.

Writing that organizes information or events in a certain order is known as sequence writing. In order for the reader to understand and follow the flow of events, sequence writing aims to convey information or events in a straightforward and logical manner.

For instance, the phases in a procedure are described sequentially in instructional writing to aid the reader in comprehending how to carry out a task. Events in narratives are presented chronologically to make it easier for the reader to follow the plot.

Learn more about sequence writing at: https://brainly.com/question/777349

#SPJ1

Since skater 2 is in the middle, force acting on her from both skater 1 in front and skater 3 behind. The free body diagram for skater 2 would include two arrows pointing towards her, representing the forces from skater 1 and skater 3. Since there is no friction, there are no other forces to consider.

The diagram would look something like this:

                       ∧

                        |

F3         ←         I          →      F1

                        |

                       v

where F1 is the force from skater 1 and F3 is the force from skater 3.

A force called friction works against the relative velocity of two surfaces coming into contact. The minute imperfections on the surfaces that interlock with one another when they come into touch are what cause it. We experience friction as a result of this interlocking as resistance to motion. The type of surfaces in contact, the force forcing the surfaces together, and the rate of motion can all have an impact on the frictional force. As some of the kinetic energy is transformed into heat energy during friction, this can also result in energy loss. Designing machinery, vehicles, and structures to reduce wear and tear and maximize performance requires an understanding of friction.

To know more about friction, check out:

https://brainly.com/question/31226

#SPJ4

The initial upward acceleration of the rocket is 15.75 m/s. The result is obtained using Newton's second law.

A rocket with a mass of 1.80 × 10⁴ kg is moving upward. The initial upward force produced by its engine (the thrust) is 4.60 × 10 N.

Find the initial upward acceleration without neglecting the gravitational force on the rocket!

We have

When the rocket moves upward, the acceleration can be found by Newton's second law equation.

F = ma

Without neglecting the gravitational force in the opposite direction, it will be

F - W = ma

F - mg = ma

With g = 9.8 m/s², the initial upward acceleration is

ma = F - mg

1.80 × 10⁴a = 4.60 × 10⁵ - 1.80 × 10⁴ × 9.8

1.80 × 10⁴a = 4.60 × 10⁵ - 1.764 × 10⁵

1.80 × 10⁴a = 2.836 × 10⁵

a =  1.575 × 10¹

a = 15.75 m/s

Hence, the rocket's initial upward acceleration is 15.75 m/s.

Learn more about Newton's second law here:

brainly.com/question/30395109

#SPJ4

In a mechanical compressional wave, the wave energy causes the matter in the medium to move up and down or back and forth at right angles to the direction the wave travels. [FALSE]

P-waves, or primary waves, are one of two types of seismic waves and are often called surface waves (so called because they propagate through the earth). A wave produced by an earthquake and recorded by a seismograph. It gets its name because it is faster than other seismic waves, reaches each seismic station first, and the next wave is called the S wave or secondary wave. Like pressure waves and longitudinal waves, sound is also a type of P wave. This means that particles in the ground (body of the earth) vibrate along or parallel to the direction of propagation of the energy of the propagating wave.

Learn more about compressional wave at

https://brainly.com/question/11808546

#SPJ4

Because the ball is thrown horizontally and lacks a vertical component at the beginning, the correct response is "0."

Air exerts a force known as air resistance. The force acts in the opposite direction when an object is flying through the air. Although a sports car with a sleek design will experience less drag and less air resistance, the car will be able to drive more quickly than a truck with a flat front.

A moving object experiences air resistance force when the air is pressing up against it. An example of a frictional force is air resistance. A force is always applied to stop an item in motion. Initially, air The force of resistance is not particularly strong.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

Force is a physical quantity that describes the interaction between two objects, which can cause a change in the motion of an object. When a force is applied to an object, it can either cause the object to start moving, speed up, slow down, or change direction.

Force is typically measured in units of Newtons (N) and is represented by a vector, which has both magnitude (strength) and direction.

For example, pushing a book across a table requires a force that is applied in the direction of the push. If the force is strong enough to overcome the book's friction with the table, the book will begin to move in the direction of the force.

The amount of force required to produce a given effect on an object depends on several factors, including the mass of the object, the nature of the force, and the length of time the force is applied. In general, the greater the force applied to an object, the greater the acceleration (or deceleration) of the object.

Assuming that the force applied to an object is directly proportional to the acceleration it experiences, if the force were doubled, the acceleration would also double. This would result in a steeper slope on the acceleration vs. time graph.

As velocity is the integral of acceleration over time, if the acceleration were doubled, the velocity would increase at a faster rate than before. This would result in a steeper slope on the velocity vs. time graph.

Lastly, if the force applied to an object were doubled, the object would reach a higher velocity than before in the same amount of time. This would result in a higher maximum velocity and a longer time to come to a stop (assuming a constant force is applied). The velocity vs. time graph would shift upward and to the right, indicating a higher maximum velocity and a longer time to reach that maximum velocity.

To know more about Force applied to an object, visit:

https://brainly.com/question/30595515

#SPJ4

The expressions which represent the electric potential difference between the two points due to the charge on the sphere  qQ/4πε0  (1/rb- 1/ra). (Option C)

The electric eventuality, also known as implicit drop or the electrostatic eventuality refers to the quantum of work energy needed to move a unit of electric charge from a reference point to the specific point in an electric field. The electric implicit generated from a point charge, Q, at a distance, r, from the position of Q is given by

V = 1/ 4πε0 Q/ r

When the electric eventuality is told by two point charge, Q and q, the formula is

V = 1/ 4πε0 qQ/ r

Electric implicit difference refers to the external work needed to bring a charge from one position to another position in an electric field. It's the change of implicit energy endured by a test charge that has a value of 1. The electric implicit difference is given as ΔV = Vb- Va

Hence, the expressions which represent the electric implicit difference between the two points due to the charge on the sphere qQ/ 4πε0( 1/ rb- 1/ ra).

Learn more about Electric potential difference:

https://brainly.com/question/30579803

#SPJ4

Complete question:

a particle of charge q is at point a , a distance ra from the center of a sphere of charge q . the particle is moved to point b , a distance rb from the center of the sphere. which of the following expressions represents the electric potential difference between the two points due to the charge on the sphere?

A) Q/4πε0  (1/rb- 1/ra) B) 1/4πε0   Q/rb C) qQ/4πε0  (1/rb- 1/ra) D) 1/4πε0   qQ/rb

A man, with his arms at his sides, is spinning on a light frictionless turntable. When he extends his arms his angular velocity remains the same. Option e is the correct choice.

When the arms are folded the rotational inertia is lower. When the man extends his arm he is basically increasing his rotational inertia thereby loosing angular velocity using the principle of conservation of angular momentum. This implies less angular distance is covered in the same time giving us negative work.

After pulling arms, the angular velocity increases but moment of inertia of decreases in, such a way that angular momentum remains constant.

To know more about the angular momentum, here

brainly.com/question/29897173

#SPJ4

A charge will flow until the electric field at the surface of the sphere is equivalent to the electric field of the test charge, because then the net force on all charges on the surface of the sphere will be zero. Here option B is the correct answer.

When the positive test charge is brought near the conducting sphere, the excess negative charge from the ground flows onto the surface of the sphere until equilibrium is reached. At this point, the electric field at the surface of the sphere becomes equal and opposite to the electric field of the test charge, thus canceling out the electric field of the test charge within the sphere.

Since the electric field inside the conductor is zero, the excess charges on the surface of the conductor are uniformly distributed and the net force on them is zero. Therefore, option B is the correct answer. Option A is incorrect because the excess charge on the surface of the sphere will be opposite in sign and not equal in magnitude to the test charge.

Option C is incorrect because the potential at the surface of the sphere is not necessarily the same as that of the test charge. Option D is incorrect because the excess charge on the surface of the sphere will be opposite in sign and not equal in magnitude to the test charge. Option E is incorrect because the net force on charges on the surface of the sphere is zero when the electric field at the surface of the sphere is equivalent to the electric field of the test charge.

To learn more about electric fields

https://brainly.com/question/8971780

#SPJ4

The center of the outer electron cloud of a carbon atom shifts a distance when the atom is polarized by the pen is, [tex]s = \dfrac{\pi \epsilon_0 m g d^3}{2eQ}[/tex].

When a negatively charged object is brought close to a small piece of paper, the paper charges cannot be distributed as they would if it were a conductor.

Outer electron Cloud Charge = −4e

Carbon Atom shifts Distance =  s=?

The Pen Charge = Q

Force on Pen Charge is, [tex]F = Q\dfrac{1}{4\pi \epsilon_0} \dfrac{8es}{d^3}[/tex]

The sum of the forces, both that of gravity and that exerted by the charge Q, must be equal to zero to maintain equilibrium at a distance s.

[tex]mg - Q\dfrac{1}{4\pi \epsilon_0} \dfrac{8es}{d^3} = 0[/tex]

This gives the distance s, to be

[tex]s = \dfrac{\pi \epsilon_0 m g d^3}{2eQ}[/tex]

To know more about the charges, here

https://brainly.com/question/19886264

#SPJ4

--The complete question is, Try rubbing a plastic pen through your hair, and you'll find that you can pick up a tiny scrap of paper when the pen is about one centimeter above the paper. From this simple experiment you can estimate how much an atom in the paper is polarized by the pen! You will need to make several assumptions and approximations.

(a) Suppose that the center of the outer electron cloud (q = -4e) of a carbon atom shifts a distance s when the atom is polarized by the pen. Calculate s algebraically in terms of the charge Q on the pen. (Use the following as necessary: m, g for acceleration due to gravity, h for the distance from the carbon to the pen, e for the charge of the electron, Q,ε0, and π. )--

Both the children meet at t = 64 s and the distance travelled by first child is 96 m, distance travelled by second child is 128 m.

Two children are said to be 224 m apart.

First child walks towards the second with 1.5 m/s.

Second child walks towards the first with 2 m/s.

Let V = V₁ + V₂ = 1.5 + 2 = 3.5 m/s

We know the expression for, distance, velocity and time as,

s = v t

where,

v is velocity

t is time

s is distance

Let us find out the time at which they meet.

t = s/v = 224/3.5 = 64 s.

They meet at t = 64 s.

The distance travelled by first child s₁ = V₁ t = 1.5 × 64 = 96 m.

The distance travelled by first child s₂ = V₂ t = 2 × 64 = 128 m.

Thus, the first child walked 96 m and the second child walked 128 m.

To know more about time:

https://brainly.com/question/9935882

#SPJ4

What is the velocity resulting from gravity here on surface of a star with a mass and diameter that are three times those of the earth (assuming that the earth's surface gravity is 9.8 m/s-2)

What is the ultimate speed?

The final velocity, on the other hand, is a vector number that gauges a moving body's speed and direction once it's reached maximum acceleration. How is the final velocity determined? It is easy to determine the final velocity with a few computations and little conceptual understanding.

What makes speed and velocity different from one another?

Most people mix the terms velocity and velocity in regular speech. These are different concepts that don't share the same significance in physics. Speed has no direction, which is one critical difference. Speed is therefore a scalar.

To know more about velocity visit:

https://brainly.com/question/17127206

#SPJ1

The required speed of the cat when the relative speed and the speed of the dog are given is calculated to be 8.25 m/s.

Distance by which the dog lags behind the cat is given as d = 4.2 m

Speed of the dog v₂ = 9 m/s

The dog catches the cat in time t = 5.6 s

Relative speed of the dog with respect to the cat is given by,

vr = v₂ - v₁ = 9 - v₁

where,

v₁ is the speed of the cat

Therefore, we can write,  

t = d/(9 - v₁)

Making v₁ as subject, we have,

v₁ = v₂ - d/t = 9 - 4.2/5.6 = 9 - 0.75 = 8.25 m/s

Thus, the speed of the cat is calculated to be 8.25 m/s.

To know more about speed:

https://brainly.com/question/17961127

#SPJ4

The picture that best represents the charge distribution on the inner and outer walls of the shell is picture 4

Charge distribution on a conducting shell can affect the electric field both inside and outside the shell. If the charge is distributed uniformly on the surface of the shell, the electric field inside the shell will be zero, while the electric field outside the shell will be the same as that of a point charge located at the center of the shell.

If the charge is distributed non-uniformly, then the electric field inside and outside the shell will be affected accordingly. In general, the charge distribution will determine the potential difference between the inside and outside of the shell, which can have important implications for the behavior of charged particles both inside and outside the shell.

Learn more about charges:https://brainly.com/question/3412043

#SPJ1

An independent equation is an equation in a system of simultaneous equations which cannot be derived algebraically from the other equations. The concept typically arises in the context of linear equations.

I = [tex]I_{1} + I_{2}[/tex]  

[tex]V_{1} = 2I_{1}[/tex]  

[tex]V_{2} = 5I_{2}\\V_{1} - V_{2} = 0 \\V_{1} = V_{2}\\V-5= V_{1}\\V = V_{1} + 5[/tex]

put equation 2 and 3 in 1

[tex]I =V_{1}/2 + V_{2} /5\\= V_{1} [1/2 + 1/5]\\= 7V_{1}/ 10\\I = 7V_{1} / 10[/tex]

put 5 in 6

[tex]I = 7/10 (v-5) [ I = 0.7V- 3.5][/tex]

given V= 3

I = 0.7 V - 3.5

I = 0.7 (3) - 3.5

[ I = -1.4 A]

Learn more about independent equations from brainly, visit: brainly.com/question/15707224

#SPJ4

The correct answer is b. twice distance as far as the slower arrow.

The kinetic energy of an object is given by the equation:

KE = 1/2mv^2

where m is the mass and v is the velocity.

Since the two arrows are identical, they have the same mass. Therefore, the kinetic energy is directly proportional to the square of the velocity.

If one arrow has twice the kinetic energy of the other, this means that its velocity is √2 times greater. The distance that an object travels is directly proportional to its velocity, so the faster arrow will travel √2 times farther than the slower arrow.

However, since the kinetic energy is proportional to the square of the velocity, the distance that the faster arrow travels will be (√2)^2 = 2 times greater than the distance traveled by the slower arrow.

Thus, the faster arrow will penetrate twice as far as the slower arrow.

Therefore, the correct answer is option b)twice as far as the slower arrow.

To know more about distance, refer here:

https://brainly.com/question/989117#

#SPJ11

The average force of gravitation between Venus and the Sun is3.24 x 10²² N.

The force of gravitation between two objects can be calculated using the equation;

F = G (m1m2) /d²

where;

To find the average force of gravitation between Venus and the Sun, we need to know their masses and the average distance between them.

Venus has a mass of approximately  4.87 x 10²⁴ kg, and the average distance between Jupiter and the Sun is about 108 million kilometers.

Plugging these values into the equation, we get:

F = 6.67 x 10⁻¹¹ (4.87 x 10²⁴) x (1.989 x 10³⁰ kg) / (108 x 10⁶)²

F = 3.24 x 10²² N.

Learn more about gravitational force here: https://brainly.com/question/72250

#SPJ1

The bolt's initial velocity, V, is zero when it is released from the container at a height of 94 meters.

A height of 0.26*94 = 24.4 m marks the final 26% of its descent.

By then, the bolt had dropped 94 - 24.4 = 69.56 m.

The last 26% of the bolt's fall takes 0.6122 seconds to complete.

(b) The bolt travels at a speed of 36.92 m/s for the final 26% of its descent (nearest hundredth).

(c) The bolt's speed is 42.94 m/s just before it touches the earth (nearest hundredth).

The change in displacement is measured in terms of velocity. The rate of velocity that changes is known termed accelerated. Due to the magnitude it contains, velocity is a vector quantity.

To know more about Velocity visit:

https://brainly.com/question/30559316

#SPJ1

To determine the effect of the temperature dependence of the thermal conductivity on the temperature distribution in a solid, consider a material for which this dependence may be represented as K=K1+aT.

Temperature and conductivity is inversely related as temeprature increases ,thermal diffusivity and thermal conductivity decrease. Thermal conductivity is related linearly so it  decrease with increasing temperature. At high temperature, thermal diffusivity and conductivity approach constant.

Given that

k = ko + aT

From Fourier law

Heat transfer per unit volume given as

x measured from left hand side of wall.

By integrating

qdx=-(ko + aT)dT

When a = 0 :

qx=-koT+C

This is become straight line.

When a > 0  :

dT/dX= increase

K decrease when x is increases.

Learn more about  temperature here:-

brainly.com/question/15267055

#SPJ4

The exact order of steps used in every experiment of the scientific method.

The scientific method is defined as the process of making facts through testing and experimentation. The basic process includes making an observation, forming a hypothesis, making a prediction, carrying out an experiment, and then analyzing the results.

The six steps of the scientific method include asking a question about something doing background research about the topic, constructing a hypothesis, doing experiments to test the hypothesis, analyzing the data from the experiment, and making conclusions.

So we can conclude that option A is the correct answer.

Learn more about scientific here: https://brainly.com/question/17216882

#SPJ1

The energy of the capacitor at this larger plate separation will be= D) U/4

The energy stored in a parallel-plate capacitor with plate area A, plate separation d, and charge Q is given by the formula:

U = (1/2) * (Q^2 / (ε_0 * A * d))

where ε_0 is the permittivity of free space.

If the separation between the plates is increased from d to 2d without changing the charge on the plates, the capacitance of the capacitor will be reduced by a factor of 2. This is because the capacitance of a parallel-plate capacitor is given by the formula:

C = ε_0 * A / d

So, when the separation is doubled, the capacitance is halved.

Since the charge on the plates remains constant, the energy stored in the capacitor is proportional to the square of the charge and inversely proportional to the capacitance. Thus, the new energy of the capacitor when the plates are separated by 2d is given by:

U' = (1/2) * (Q^2 / (ε_0 * A * (2d))) * (1/2)

where the factor of 1/2 is included because the capacitance is halved.

Simplifying this expression, we get:

U' = U / 4

Therefore, the energy of the capacitor at the larger plate separation is (d) U/4.

To know more about  CAPACITOR  visit,

https://brainly.com/question/29100869

#SPJ4

(a) Circumference is, C = 7.4π. (b) Time interval is, [tex]A_t = 0.089 s[/tex]. (c) Current value is, [tex]I = -1.80 \times 10^{-18} A[/tex]

Part (a): The circumference of a circle with radius R is given by C = 2πR. Therefore, for a circle of radius 3.7 m, we have:

[tex]C = 2\pi(3.7) = 7.4\pi[/tex]

[tex]Expression: C = 7.4\pi[/tex]

Part (b): The time interval At for electron to finish one circle is given by the distance traveled divided by the speed. In this case, the distance traveled is equal to the circumference of the circle, so we have:

[tex]At = C/v[/tex]

[tex]At = 7.4\pi/83[/tex]

[tex]A_t = 0.089 s[/tex]

Part (c): The current on the circle can be found using the formula [tex]I = Q/t,[/tex]where Q is the charge and t is the time interval. Since the electron has a charge of -e,

[tex]I = (-e)/At[/tex]

Substituting the value of At from above,

[tex]I = (-1.602 * 10^-19 C)/0.089 s[/tex]

[tex]I = -1.80 * 10^{-18} A[/tex]

To know more about Circumference, here

https://brainly.com/question/17009561

#SPJ4

The magnitude and direction of the electric field at P 1 when t = 3.00 s and r 1  = 0.02m is 0.3 v/m (option A). The direction is anti clockwise.

The force per charge on the test charge is a straightforward way to define the size of the electric field. From its definition, the common metric units for electric field strength are derived. Electric field units would be force units divided by charge units since the definition of an electric field is a force per charge.

The magnitude of the electric field at P1 is as follows:

E1 = dΦ/dt

E (2πr1) = S dB/dt

= r1/2 (dB/dt)

= r1/2 ║6t² + 8t║

= 0.2 / 2 ║6 (3²) + 8 (3)

= 0.3 v/m

The electric field is oriented counter clockwise to the direction of the induced current in a hypothetical circular conducting loop that passes through P 1.

Learn more about electric field here: https://brainly.com/question/30590932

#SPJ4

The frequency and wave speed after the water was high in Toledo and low in Buffalo is 2.3 * 10^-5 Hz and 18 m/s

Period = 12 hours

= 43,200 seconds.

The number of cycles or vibrations that a body in periodic motion experiences during one unit of time, as well as the number of waves that pass a fixed point in a unit of time. After moving through a series of situations or positions and then returning to its initial position, a body in periodic motion is said to have experienced one cycle or one vibration.

Frequency= 1/T

= 1/43200

= 2.3 * 10^-5 Hz

The amount of space a wave covers in a certain amount of time, such as the number of metres it covers in a second, is known as its wave speed. Speed = Wavelength x Frequency is an equation that describes how wave speed relates to wave wavelength and wave frequency. When the wavelength and frequency are known, this equation can be used to determine the wave speed.

Wave speed

= wavelength*(1/period)

= wavelength*frequency

= 800,000 m * 2.3 * 10^-5 Hz

= 18 m/s

Therefore, wave speed of the water be 18 m/s.

Learn more about frequency, wave speed:

https://brainly.com/question/3148541

#SPJ4

The gravitational force between the objects depends on their mass as well as distance between them. If the distance increases, the gravitational force decreases. Hence, the statement is false.

The gravitational force is the force by which an object attracts other object into its center of mass. The gravitational force depends on the masses of the objects and distance between them by the equation written below:

Fg = G m1 m2/r²

where G is the universal gravitational constant equal to 6.67 × 10⁻¹¹ N/kg²m²

As per this universal equation for gravitation, as the mass increases, gravitational force between the objects increases. If the force between the two masses decreases 2 times with an increase in distance.

Therefore, the statement is false.

Find more on gravitational force:

brainly.com/question/24783651

#SPJ9

The spring exerts the same force on both glider A and glider B, equal to (Fa - (-6N))/2 = (Fb - (6N))/2.

The force of the spring can be calculated using Hooke's law, which states that the force exerted by a spring is proportional to the displacement of the spring from its rest position.

Let's call the spring force "Fspring". Since the spring is compressed, it is exerting a force on both gliders, which we can call "Fa" for glider A and "Fb" for glider B.

The total force on each glider is equal to the spring force plus the force of the 6N external force:

Fa = Fspring + (-6N)

Fb = Fspring + (6N)

Since the forces on both gliders are equal in magnitude and opposite in direction, we can write the following equation:

Fspring = (Fa - (-6N))/2 = (Fb - (6N))/2

To calculate the spring force, we need to find the displacement of the spring from its rest position. This can be done using the following equation:

Fspring = kx

Where;

k is the spring constant

Since the spring is compressed, the displacement "x" is negative. We can find the spring constant "k" using the equation:

k = Fspring / x

We can substitute the equation for Fspring from above into this equation:

k = (Fa - (-6N))/2x / x

We can rearrange this equation to solve for "x":

x = (Fa - (-6N))/(2k)

We can then substitute this value of "x" back into the equation for Fspring to find the force exerted by the spring:

Fspring = (Fa - (-6N))/2 = (Fb - (6N))/2

Since the masses of glider A and glider B are known, we can use the following equation to find the acceleration of each glider:

Fa = ma

Fb = mb

Where "m" is the mass of each glider and "a" is the acceleration of each glider.

We can rearrange these equations to solve for the acceleration of each glider:

a = Fa / m

b = Fb / m

Now that we have the acceleration of each glider, we can use Newton's second law to find the force exerted by the spring on each glider:

Fa = ma = 400 g * a

Fb = mb = 600 g * b

Finally, we can substitute the value of Fspring from above into these equations to find the force exerted by the spring on each glider:

Fa = Fspring + (-6N) = (Fa - (-6N))/2 + (-6N)

Fb = Fspring + (6N) = (Fb - (6N))/2 + (6N)

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

Answer: The force of gravity

Jupiter and other gas Giants use gravitational force to attract gas to the top, while they still have a solid core,the force in the center keeps the planet together.

I hope this helps & Good Luck <3 !!

Assuming that the arrow is launched vertically upward with an initial velocity v and air resistance is negligible, the time the arrow is in the air until it returns to launch height can be expressed as:

t = 2v/g

To know more about air resistance , check out :

https://brainly.com/question/14877316

#SPJ1