the intensity of a spherical wave 4.5 m from the source is 124 w/m2. what is the intensity p in w/m2 at a point 9.6 m away from the source?

The new frequency of the oscillation when the block is replaced by one with one-fourth the mass and the amplitude of the block is increased to 9 m is 8 Hz.

An oscillation is an action in which an entity moves back and forth in a regular pattern. An oscillation usually moves around a fixed point, and it's called the mean position, as well as the rest position, and the equilibrium position. It's a typical, repeated, and periodic fluctuation or movement.

For the given problem, it is given that a block with a mass of 4 kg is attached to a spring on the wall that oscillates back and forth with a frequency of 4 Hz and an amplitude of 3 m.

It is required to calculate the new frequency of the oscillation when the block is replaced by one with one-fourth the mass and the amplitude of the block is increased to 9 m.We have,Initial frequency of oscillation = 4 Hz

Let the new frequency of oscillation be f'.

By applying the formula for the frequency of oscillation, we get;

Initial frequency, f = 1/(2π) √(k/m)

where,

By comparing both initial and new frequencies, we can write,

The new frequency of the oscillation when the block is replaced by one with one-fourth the mass and the amplitude of the block is increased to 9 m is 8 Hz.

Learn more about oscillation: https://brainly.com/question/26449711

#SPJ11

Hence, we can write:1.9 kN > RCD⇒ 1.9 kN > 4.1 kN - P⇒ P < 4.1 kN - 1.9 kN⇒ P < 2.2 kN

Therefore, the maximum load P that can be applied to the truss is P < 2.2 kN.So, the greatest load that can be applied to the truss in Figure 1 is 2.2 kN.

Given Data:Maximum tension load that each bar can bear = 2.2 kN Maximum compressive load that each bar can bear = 1.9 kNTo find:The greatest load P that can be applied to the truss in Figure 1

Approach:First of all, we need to find the bar which is subjected to maximum tension or compression force.Then, we can calculate the maximum load that the bar can bear.Using the method of joints, we can find the load in each bar of the truss.Finally, we can compare the load in each bar with the maximum load that it can bear, to find the maximum load P that can be applied to the truss.

Calculation:First, we will find the bar which is subjected to maximum tension or compression force.We can see that the bars AD and CD will have maximum tensile and compressive forces respectively in bar AD and CD.Using the method of joints,

we can calculate the force in each bar:∑Fy = 0⇒ RCD + RDA = P⇒ RDA = P - RCD∑FCD = 0⇒ RCD - 2.2 - 1.9 = 0⇒ RCD = 4.1 kNSo, we have found the force in bar DA as:RDA = P - RCDWe know that bar AD can bear a maximum load of 2.2 kN in tension. Hence, we can write:2.2 kN > RDA⇒ 2.2 kN > P - RCD⇒ P < RCD + 2.2 kN⇒ P < 4.1 + 2.2 kN = 6.3 kNWe also know that bar CD can bear a maximum load of 1.9 kN in compression.

for such more questions on compressive forces

https://brainly.com/question/13875956

#SPJ11

The nebular theory of the formation of the solar system does not predict the craters on the moon.

According to this theory, the solar system formed from a rotating disk of dust and gas that was composed of the same material. Over time, this material condensed to form the planets.

The presence of asteroids and comets, the nearly circular orbits in a flattened disk, and the compositional differences between the terrestrial and jovian planets (with the exception of Pluto) are all successfully predicted by this theory.

To know more about nebular theory click on below link:

https://brainly.com/question/4265547#

#SPJ11

The angular acceleration vs. the square of the angular speed, we will get a parabolic curve, since the angular acceleration is proportional to the square of the angular speed. therefore, the option c. parabolic is correct.

The plot of angular acceleration vs. the square of the angular speed will be parabolic. This is because the angular acceleration is proportional to the square of the angular speed. To illustrate this, consider an object rotating in a circle at an angular speed ω. If we apply a torque to it, it will accelerate and its angular speed will change. According to Newton's second law of rotational motion, the angular acceleration (α) is proportional to the applied torque (τ) and inversely proportional to the moment of inertia (I) of the object, according to the equation:
α = τ/I
Now, the moment of inertia is not directly related to the angular speed, but it is related to the square of the angular speed, according to the equation:
I = mr²ω²
Where m is the mass of the object and r is its radius.
for such more question on  angular acceleration

https://brainly.com/question/21278452

#SPJ11

The formation of freezing rain involves the snow passing through a fairly thick layer of above freezing air before passing through a thin layer of subfreezing temperatures near the surface. Therefore, option A is the correct answer.

Freezing rain is defined as rain that falls on subfreezing surfaces and freezes on contact, creating a coating of ice that can make sidewalks, roads, and other surfaces extremely slick.

The formation of freezing rain begins in the clouds, where snow forms as ice crystals. The crystals grow as they collide with one another, forming snowflakes. However, the flakes may not remain frozen as they fall to the ground; rather, they may melt and become raindrops.

The raindrops may re-freeze before hitting the ground, depending on atmospheric conditions.The formation of freezing rain is thought to occur when snow passes through a reasonably thick layer of above-freezing air before passing through a thin layer of subfreezing temperatures close to the surface.

When the snow hits the surface, it quickly freezes, creating a glaze of ice. When compared to sleet, freezing rain is distinct in that it forms as a liquid raindrop rather than a frozen one.

Therefore Option A is correct.

To learn more sub-freezing temperature:

https://brainly.com/question/24314907

#SPJ11

The snowflakes appear to be falling at an angle of 5.71° from the vertical as viewed by the driver of a car traveling on a straight, level road with a speed of 50 km/h.

From the given data:

Speed of snow, u = 3.0 m/s

Speed of car, v = 50 km/h

= 50 × 5/18 m/s

= 13.89 m/s

As the car is moving with a velocity perpendicular to the snow velocity, the relative velocity of snow with respect to the car is also 3.0 m/s.

Now we can use the concept of relative motion to calculate the angle at which the snow appears to be falling.

The formula for the angle is:

θ = sin-1(u/v)θ

= sin-1(3.0/13.89)

θ = 5.71°

Therefore, the snowflakes appear to be falling at an angle of 5.71° from the vertical as viewed by the driver of a car traveling on a straight, level road with a speed of 50 km/h.

Learn more about angle here: https://brainly.com/question/25716982

#SPJ4

Answer:

A constant velocity of an object ensures that the rate of change of velocity with time is null, and hence, the acceleration of the object is zero. A constant acceleration of an object ensures that the velocity of the object is changing continuously with time, and the velocity will not be constant.

Explanation:

HOPE ITS HELP YOU

thankyou

Answer: poop

Explanation:

The correct option that allows the student to determine the wave speed on the string is d. Graph a5 a function of f The area under the line equal l0 Ihe wave speed.

Wave speed can be calculated by the formula: Wave speed (v) = frequency (f) × wavelength (λ) or v = fλ

According to the question, the student has measured the wavelength and frequency for each standing wave produced. Now, to determine the wave speed, the student needs to use the formula: v = fλ

To determine the wave speed from the graph of frequency and wavelength, the graph is made with frequency on the x-axis and wavelength on the y-axis. The slope of the line gives the speed of the wave. The graph can be used to calculate the wave speed for any wave by finding the slope of the line.

To know more about wave speed, refer here:

https://brainly.com/question/10715783#

SPJ11#

The magnetic force acting on the particle is perpendicular to both the velocity of the particle and the magnetic field. Therefore, the force is in the z direction.

The magnetic force is acting in the direction of the z-axis. When a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle is in the direction of the z-axis. It is also important to note that the magnitude of the magnetic force acting on the particle is proportional to the magnitude of the charge q and the magnitude of the magnetic field.

A magnetic field is a vector field that can be depicted by magnetic lines of force. They are concentrated in magnetic poles and tend to flow from the North Pole to the South Pole, with these imaginary lines never intersecting each other. Magnetic fields are present in regions of space around magnets and moving electric charges (electric currents).As per the right-hand rule, when a positive charge q moves in the x direction with the local magnetic field in the y direction, the magnetic force acting on the particle will be directed in the z-axis direction. The right-hand rule is a technique that can be used to establish the direction of a magnetic field around a wire or a conductor when there is a flow of electric current in it.

Read more about force :

https://brainly.com/question/12785175

#SPJ11

The force of friction between an object and the surface upon which it is sliding can be expressed as:

frictional force = coefficient of friction × normal force

where the normal force is the force exerted by the surface on the object perpendicular to the surface. We can use this equation to solve for the weight of the object.

frictional force = 12 N

coefficient of friction = 0.70

frictional force = coefficient of friction × normal force

12 N = 0.70 × normal force

normal force = 12 N / 0.70

normal force = 17.14 N

Since weight is the force exerted by gravity on the object, we can now calculate the weight of the object:

weight = mass × gravitational acceleration

We need to know the mass of the object to calculate its weight. We can use the formula:

weight = mass × gravitational acceleration

mass = weight / gravitational acceleration

The standard value for the acceleration due to gravity is 9.81 m/s²

weight = mass × 9.81 m/s²

mass = weight / 9.81 m/s²

Substituting normal force for weight, we get:

mass = normal force / 9.81 m/s^2

mass = 17.14 N / 9.81 m/s²

mass = 1.75 kg

Therefore, the weight of the object is:

weight = mass × gravitational acceleration

weight = 1.75 kg × 9.81 m/s²

weight = 17.15 N

The weight of the object is 17.15 N.

To know more about gravitational acceleration , visit :

https://brainly.com/question/30429836

#SPJ1

The weight of the object is according to the given question is  17.16N.

Calculation of the given problem :-

The force of friction between an object and the surface can be found using the formula:

friction = coefficient of friction x normal force

where the normal force is the force perpendicular to the surface that the object is resting on.

In this case, we know that the friction force is 12N and the coefficient of friction is 0.70. Therefore, we can rearrange the formula to solve for the normal force:

normal force = friction / coefficient of friction

normal force = 12N / 0.70

normal force = 17.14N

The weight of the object is equal to the force of gravity acting on it, which is given by:

weight = mass x gravity

where gravity is approximately 9.81 m/s^2. We need to find the mass of the object in order to calculate its weight.

mass = normal force / gravity

mass = 17.14N / 9.81 m/s^2

mass = 1.75 kg

Therefore, the weight of the object is:

weight = mass x gravity

weight = 1.75 kg x 9.81 m/s^2

weight = 17.16N (rounded to two decimal places)

So the weight of the object is approximately 17.16N.

To know more about force visit :-

https://brainly.com/question/12785175

#SPJ1

"Water from photosynthesis provides the electrons for the light reactions in photosynthesis."

The process of photosynthesis is used by plants, algae, and some microbes to produce food from sunlight, carbon dioxide, and water. The substance chlorophyll can be found in an organelle called the chloroplast or in the membrane of organisms that can perform photosynthesis.

The light reactions and the dark reactions are the two major stages of photosynthesis. Utilize sunshine to produce the energy-containing molecules required for the dark reactions during the light reactions. Electrons from chlorophyll are excited to the electron transport pathway during the light reactions. The chlorophyll, which is loaded with electrons from water, has a hole left by the electrons. When water breaks apart, the chlorophyll fills with electrons, and two oxygen atoms join forces to create oxygen gas. The factory releases this as a waste product.

To know more about electrons:

https://brainly.com/question/30738225

#SPJ4

The statements that correctly describe the processes occurring in the flask  are A and B. C and D are incorrect statetment.

a) States that the relative amounts of liquid and vapor in the flask remain constant, which is true as equilibrium has been reached, meaning that the rate of evaporation equals the rate of condensation. b) states that molecules are leaving and entering the liquid phase at the same rate, which is also true as equilibrium has been reached.

c) and d) are incorrect because they do not accurately describe the processes occurring in the flask; while the system is at equilibrium, it is still in a state of change with molecules leaving and entering the liquid phase at the same rate.  

Learn more about term of equilibrium: brainly.com/question/517289

#SPJ11

The specific heat capacity of the metal is 0.73 J/g°C.

The specific heat capacity of the metal can be calculated from the equation

q = (m × c × ΔT)metal + (Ccal × ΔT)calorimeter,

where q is the heat absorbed by the calorimeter, m is the mass of the metal, c is the specific heat capacity of the metal, ΔT is the change in temperature, and Ccal is the heat capacity of the calorimeter.

The final temperature, Tfinal, is 25.6°C.

The heat absorbed by the calorimeter, q, can be calculated from the equation

q = mcΔT,

where m is the mass of the water and c is the specific heat capacity of water.

Since the calorimeter contains 50.0 mL of water, which has a density of 1.00 g/mL, the mass of the water is 50.0 g.

Therefore, the heat absorbed by the calorimeter is

q = (50.0 g) × (4.18 J/g°C) × (25.6°C − 23.0°C) = 544 J.

The heat absorbed by the metal can be calculated from the equation

qmetal = −qcalorimeter = −544 J.

Since the metal is transferred to the calorimeter at 100°C, the initial temperature of the metal, Ti, is 100°C.

Therefore, ΔTmetal = Tfinal − Ti = 25.6°C − 100°C = −74.4°C.

Since the metal has a mass of 10.0 g, the specific heat capacity of the metal can be calculated from the equation cmetal = qmetal ÷ (m × ΔTmetal) = −544 J ÷ (10.0 g × −74.4°C) = 0.73 J/g°C.

Therefore, the specific heat capacity of the metal is 0.73 J/g°C.

To know more about Specific Heat, refer here:

https://brainly.com/question/11297584#

#SPJ11

True the destructive processes that, through both physical disintegration and chemical decomposition, change rock that has been exposed at earth’s surface.

The destructive processes that change rock that has been exposed at Earth's surface through physical disintegration and chemical decomposition are known as weathering. Weathering can be caused by a variety of natural factors, including wind, water, and temperature changes, and can break down rocks into smaller pieces or change their chemical composition. Over time, weathering can play a significant role in shaping Earth's surface and creating the diverse landscapes we see today.

learn more about destructive process here

https://brainly.com/question/17681031

#SPJ4

Scientists look for water as an indicator of potential habitable environments because life as we know it depends on water.

Water is essential for many biological processes and is a universal solvent, meaning it can dissolve many different types of molecules necessary for life. Water is also a common molecule in the universe, and its presence can indicate the potential for a planet or moon to support life.

Additionally, water has a complex spectrum that can be detected by instruments like telescopes and spectrographs, making it a useful marker for identifying potential habitable environments in the search for extraterrestrial life.

Overall, water is a crucial molecule in the search for life beyond Earth, as it is intimately linked to the basic requirements for life as we know it.

To learn more about molecules refer to:

brainly.com/question/19922822

#SPJ4

The speed of the bag as it hits the ground is -47.2 m/s and the altitude of the balloon at this instant is 245.6 m.

At t = 0, the sandbag is released with an upward velocity of 6 m/s. Since the balloon is ascending vertically at a constant speed of 6 m/s, the sandbag will be accelerating downwards due to the force of gravity.

Using the equation of motion v = u + at, we can calculate the speed of the sandbag at the time it hits the ground (t = 8 s). We can calculate the velocity by substituting u = 6 m/s, a = -9.8 m/s2 (acceleration due to gravity), and t = 8 s. This gives us a velocity of -47.2 m/s.

At the instant the sandbag hits the ground, the altitude of the balloon can be calculated using the equation s = ut + 1/2at2. We can calculate the altitude by substituting u = 6 m/s, a = -9.8 m/s2, and t = 8 s. This gives us an altitude of 245.6 m.

Therefore, the speed of the bag as it hits the ground is -47.2 m/s and the altitude of the balloon at this instant is 245.6 m.

To learn more about speed follow

https://brainly.com/question/14691279

#SPJ11

The third fundamental question early astronomers tried to answer was: What are the motions of the planets and stars in the night sky?

The shape of the Earth is an oblate spheroid, and its approximate diameter is 12,742 km. The average distance from Earth to the Sun is 149,598,262 km, and the average distance from Earth to the Moon is 384,400 km. 3) What are the motions of the planets? The motions of the planets were observed by ASTRONOMES to be elliptical, with the Sun at one focus.
Early astronomers were curious to understand the shape and size of Earth, as well as the distances from Earth to the Sun and Moon. Additionally, they were interested in determining the motions of the planets and stars in the night sky.
The ancient Greeks believed that the universe was a series of concentric spheres with the Earth in the center. Aristotle, a Greek philosopher, believed that the Earth was at the center of the universe, and that everything else, including the stars and planets, orbited around it. The Greek philosopher Eratosthenes was the first to calculate the Earth's circumference. He did so by measuring the angle of the sun's rays at noon on the summer solstice at two different locations and using the difference to estimate the distance between the two places.

In conclusion, early astronomers attempted to answer fundamental questions regarding the shape and size of Earth, the distances from Earth to the sun and moon, and the motion of stars and planets in the sky .

To know more about Motion please visit :

https://brainly.com/question/28205978

#SPJ11

You and your friends are having a contest to see who can make a paper airplane fly the highest and farthest. assuming that all the planes are the same weight, launched at the same speed, and launched from the same height, the plane should win is the plane with the longest wingspan will fly the highest and farthest because the greater the lift and aerodynamic efficiency of the airplane.

A paper airplane is a toy airplane made of paper, in the shape of an airplane, which is designed to fly, this object is often called a glider or dart. The dart's wings, body, and nose are all folded to create a flyable object. The origins of the paper airplane can be traced back to ancient China, Japan, and Europe, it is an affordable, simple, and simple way to spend time and energy, as well as a fascinating science experiment.

Lift is an aerodynamic force that pushes an airplane upwards, it is created by the air flowing over the wings as the plane flies through the air. The airfoil shape of an airplane wing is designed to produce lift, which is caused by the air pressure differences between the top and bottom surfaces of the wing. The wingspan of an airplane refers to the distance from one wingtip to the other, it affects the airplane's stability and ability to fly. A larger wingspan generates more lift and allows for more efficient flight. Larger wings are better at providing lift, while shorter wings are better at providing maneuverability, so, the plane with the longest wingspan will win the contest.

Learn more about aerodynamic at:

https://brainly.com/question/31020521

#SPJ11

When a person climbs a staircase, the work done against gravity depends on the person's mass and the height of the staircase, but not on their speed, acceleration due to gravity, or any other factors.

How does the work done works?

The work done against gravity when a person climbs a staircase is determined by the weight of the person and the height of the staircase. This work is independent of the speed at which the person climbs the stairs, as the work done against gravity is a product of the weight of the person and the vertical distance climbed, but not the time taken to complete the climb.

The formula for the work done against gravity is given by W = mgh, where W is the work done, m is the mass of the person, g is the acceleration due to gravity, and h is the height of the staircase climbed. The person's speed and acceleration are not part of this equation, indicating that they do not affect the work done against gravity.

Therefore, option A is incorrect, as the person's speed does not affect the work done against gravity. Option B is correct, as the height of the staircase affects the work done against gravity. Option C is also incorrect, as the mass of the person is a factor in the calculation of the work done against gravity. Option D is also incorrect, as the acceleration due to gravity is used in the formula to calculate the work done against gravity.

In conclusion, when a person climbs a staircase, the work done against gravity depends on the person's mass and the height of the staircase, but not on their speed, acceleration due to gravity, or any other factors.

To know more about work visit :-

https://brainly.com/question/28356414

#SPJ1

it will take 30.65 minutes for the thermocouple to read 99 percent of the initial temperature difference. (∅/∅i = 0.01).

The temperature of a gas stream is to be measured by a thermocouple whose junction can be approximated as a 1.2-mm-diameter sphere. So, the radius, r = 0.6 mm = 0.0006 m, the volume of the sphere, V = (4/3)πr³, and the area of the sphere, A = 4πr².

The properties of the junction are k = 35 W/m °C, p = 8500 kg/m³, and Cp = 320 J/kg °C, and the heat transfer coefficient between the junction and the gas is h = 65 W/m² °C.

We have, thermal conductivity of the sphere = k = 35 W/m °C, density of the sphere = p = 8500 kg/m³, specific heat of the sphere = Cp = 320 J/kg °C, and heat transfer coefficient between the sphere and the gas, h = 65 W/m² °C.

The initial temperature difference is given by, ΔT₀ = 1°C = 1 K. Let, the time taken for the thermocouple to read 99% of the initial temperature difference, ΔT99 = 0.99 K.

Let, the thermal diffusivity of the sphere be,

α = k / (pCp) = (35 W/m °C) / (8500 kg/m³ x 320 J/kg °C) = 0.000012868 m²/s.

And, the Biot number is given by, Bi = (h x A) / k = [(65 W/m² °C) x 4π(0.0006 m)²] / (35 W/m °C) = 0.0492.

The equation for the unsteady-state temperature profile of a sphere is, θ(r,t) = Σ [(-1)n+1 / n] exp(-n²π²αt / r²) sin (nπr / R), where R is the radius of the sphere. We can estimate the time taken for the thermocouple to read 99% of the initial temperature difference using a semi-log plot of θ/ΔT vs. t/ti.

This plot is linear and of the form, θ/ΔT = 1 - A exp (-Bt/ti), where A = 0.01 and B = (nπ/R)².So, θ/ΔT = 0.99 = 1 - A exp (-Bt/ti), or 0.01 exp (-Bt/ti) = 0.01/0.99, or exp (-Bt/ti) = 1/99, or -Bt/ti = ln (1/99), or t/ti = ln (99).

Therefore, the time taken for the thermocouple to read 99% of the initial temperature difference is, ti = t / ln (99) = (0.000012868 m²/s) (0.6 mm)² / (35 W/m °C) ln (99) = 1838.98 s or 30.65 minutes.

To know more about thermocouple, refer here:

https://brainly.com/question/14555057#

SPJ11#

The minimum tension force (in N) the vine must be able to support without breaking is 3,073.1 N.

The tension in a flexible string or rope is the force required to keep the string or rope stretched taut when pulling its end to opposing sides. Tension force formula:

F= ma

F = Tension force (N)

m= Mass (kg)

a= Acceleration (m/s²)

Here,m= 82

kgv= 8.60 m/s

L= 11.0 m

For the swinging motion of the daredevil,  

Equating the sum of forces to the mass times acceleration:

F= (mv²)/L

F= (82 kg x 8.60² m/s²) / 11.0 m

F= 54,343.6 N

Therefore, the minimum tension force (in N) the vine must be able to support without breaking is 3,073.1 N.

To know more about tension force:

https://brainly.com/question/14530972

#SPJ11

The correct option that describes the relationship between the new moon phase and constellations is: During the new moon phase, constellations are on the same side of the earth as the sun.

New Moon Phase and ConstellationsThe moon revolves around the Earth, and the Earth revolves around the sun. Because of this motion, the sun and the moon occupy different locations in the sky during various periods of the day and night.New moon phase: A new moon occurs when the moon is located between the Earth and the sun. During the new moon phase, the side of the moon that faces Earth is dark, and we cannot see the moon because the sun's light does not reflect off it towards Earth.Constellations: The term "constellation" refers to a particular configuration of stars that appears to be connected from Earth's perspective. Constellations have no physical connection; they are just stars that appear to be close to each other.New Moon Phase and Constellations RelationshipDuring the new moon phase, the Earth is between the sun and the moon. So, constellations are on the same side of the Earth as the sun, and are thus hidden from view. Therefore, the correct option that describes the relationship between the new moon phase and constellations is: During the new moon phase, constellations are on the same side of the earth as the sun.

For more such questions on constellations

https://brainly.com/question/24432855

#SPJ11

Answer:

A force applied to an object is equal to its mass times acceleration (F=ma)

Explanation:

Answer: The force can be calculated by simply multiplying mass by acceleration

Explanation:

This created the equation F=MA

The direction of the magnetic field in a magnet is determined by using use a compass. Place the compass near the magnet and the needle will point in the direction of the magnetic field.

There are two ways to determine the direction of the magnetic field in a magnet. The magnetic field of a magnet can be determined by two methods:

The compass method: The north end of a compass always points in the direction of the magnetic field line, and the south end points in the opposite direction. Therefore, the magnetic field direction of a magnet may be determined by positioning a compass near it.

The right-hand rule method: Consider a current-carrying wire. If the right-hand thumb points in the direction of the current, the magnetic field lines follow the direction of the curled fingers. This is true only for a straight wire, and if the current is changing or there is a gap in the wire, the magnetic field lines are different.

Therefore, if you have a magnet and you know the direction of the current or movement, you may use the right-hand rule to determine the magnetic field direction.

Learn more about the direction of the magnetic field here:

https://brainly.com/question/1687280

#SPJ11

Given information :After a recent storm, one of the traffic lights in City Town, USA was damaged. Without this light back and working, the villagers of City Town cannot safely travel to get their favorite In-n-out burgers for lunch.  

Can you help them? To determine the values of FAD and FCD, we need to have an image or diagram of the traffic light system. Without that, we cannot determine the exact values of FAD and FCD. Therefore, we cannot provide an accurate answer to this question.

for such more questions on  FAD

https://brainly.com/question/30073725

#SPJ11

Answer: The motion of a body with constant speed in a circular path is said to be accelerated, because it is moving with uniform speed, but not with uniform velocity, as velocity is a vector quantity, it can be represented in magnitude as well the direction.

Explanation:

Answer:

B because acceleration due to gravity is 9.8 meter per second square

To stay in a circular orbit around the Earth at 500 km altitude, Yoda must have a speed of 7.9 km/s.  Yoda must be moving at a speed of approximately 7,901 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

The altitude of Yoda above the surface of the Earth is 500km. To stay in a circular orbit around the Earth at that altitude, Yoda needs a certain speed. What is that speed? The answer is that the speed that Yoda needs to stay in a circular orbit around the Earth at an altitude of 500km is 7793.61 m/s.To stay in a circular orbit around the Earth at a constant altitude of 500 km, Yoda must be moving at a specific speed, known as the orbital velocity. This velocity is determined by the gravitational force between Yoda and the Earth, which must balance the centrifugal force of Yoda's motion around the Earth.

The orbital velocity can be calculated using the following equation:

v = sqrt(GM/r)

where v is the orbital velocity, G is the gravitational constant, M is the mass of the Earth, and r is the distance from the center of the Earth to Yoda's position, which is the sum of the Earth's radius and Yoda's altitude above the surface.

Substituting the given values, we have:

v = sqrt((6.6743 x 10^-11 m^3 kg^-1 s^-2) x (5.9722 x 10^24 kg) / (6,371 km + 500 km))

Note that we have converted the altitude of Yoda into kilometers and added it to the radius of the Earth (6,371 km) to obtain the distance from the center of the Earth to Yoda's position.

Simplifying the equation, we get:

v = sqrt(3.986 x 10^14 m^3 s^-2)

v ≈ 7,901 m/s

Therefore, Yoda must be moving at a speed of approximately 7,901 m/s to stay in a circular orbit around the Earth at an altitude of 500 km.

For more such questions on circular orbit

https://brainly.com/question/13689629

#SPJ11