Answer:
W = 1.8 J
Explanation:
The amount of work required to move the given charges can be found by using the following formula:
[tex]W = \frac{kq_1q_2}{\Delta r} \\\\[/tex]
where,
W = Work done = ?
k = Colomb's constant = 9 x 10⁹ Nm²/C²
q₁ = magnitude of first charge = 6 μC = 6 x 10⁻⁶ C
q₂ = magnitude of second charge = 4 μC = 4 x 10⁻⁶ C
Δr = change in distance = 18 cm - 6 cm = 12 cm = 0.12 m
Therefore,
[tex]W = \frac{(9\ x\ 10^9\ Nm^2/C^2)(6\ x\ 10^{-6}\ C)(4\ x\ 10^{-6}\ C)}{0.12\ m}[/tex]
W = 1.8 J
The switch is released and the door locks. Explain in detail how this happens.
Answer:
The iron bolt is attracted to the electromagnet. The force of attraction between the electromagnet's core and the iron bolt is greater than the force of the spring, so the iron bolt is pulled out of its housing in the door
Explanation:
A sudden loud sound such as an explosion can damage the ear, as can long-term exposure to high levels of sound. *
Complete question is;
A sudden loud sound such as an explosion can damage the ear, as can long-term exposure to high levels of sound.
A) True
B) False
Answer:
True
Explanation:
This sudden sound described in the question is usually referred to as an impulse sound which can cause damage to hearing. Furthermore, it can lead to a type of hearing loss where one experiences buzzing, roaring or ringing sounds in one's ears.
Thus the statement in the question is true.
Which two forms of electromagnetic energy are used to produce the
most spectacular fluorescence when placed in darkness?
1. microwaves and x rays
2. microwaves and infrared
3. ultraviolet and x rays
4. ultraviolet and infrared
Answer:
3. ultraviolet and x rays
The two forms of electromagnetic energy are used to produce the most spectacular fluorescence when placed in darkness are ultraviolet and x rays.
What is electromagnetic energy?Electromagnetic radiation is waves of the electromagnetic field, propagating through space, carrying electromagnetic radiant energy. It includes radio waves, microwaves, infrared, light, ultraviolet, X-rays, and gamma rays.
What is fluorescence?
Fluorescence is the process in which a substance absorbs light at a high energy, short wavelength and emits light at a lower energy, usually visible wavelength.
What is ultraviolet rays?Ultraviolet rays is a type of electromagnetic waves in which the wavelength is shorter than visible rays. It is responsible for 10% of sunlight and causes sun tan. It is used to purify water in water purifiers. It kill germs.
What is x rays?X rays lies beyond ultraviolet rays. It is used to diagnose in medical field. It can destroy living tissues so excessive exposure should be limited to reduce harmful effect.
The color change of fluorescent minerals is most spectacular when the minerals are placed in darkness and exposed to electromagnetic energy shorter than visible light.
Ultraviolet and x rays are shorter than visible light so they exhibit fluorescent property.
To learn more about Electromagnetic radiation here
https://brainly.com/question/10759891
#SPJ2
You have 1 hour to answer this question or you will be logged out.
How much force (in Newtons) does a baseball pitcher have to exert on a 250g baseball to make it accelerate to 50 m/s the
Instant that it leaves his hand?
Answer:
Force = 12.5 Newton
Explanation:
Given the following data;
Mass = 250 g to kilograms = 250/1000 = 0.25 kg
Acceleration = 50 m/s²
To find the force;
Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.
Mathematically, it is given by the formula;
[tex] Acceleration = \frac {Net \; force}{mass} [/tex]
Making force the subject of formula, we have;
[tex] Force = mass * acceleration [/tex]
Substituting into the formula, we have
[tex] Force = 0.25 * 50 [/tex]
Force = 12.5 Newton
Đặt điện áp U = 200 cos Omega t vào hai đầu đoạn mạch gồm biến trở R và tụ điện mắc nối tiếp điều chỉnh r để công suất tiêu thụ của đoạn mạch đạt cực đại Khi Điện áp tức thời hai đầu r = 100 V và đang tăng thì điện áp tức thời giữa hai đầu đoạn mạch là
Answer:
I don't understand the Question
Select the correct answer. Based on the law of conservation of energy, which statement is correct? A. Energy is always being added to all parts of the Universe. B. Energy is often destroyed in some parts of the Universe. C. Energy in a closed system cannot change forms. D. Energy in an isolated system remains constant.
Answer:
D. Energy in an isolated system remains constant.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the various forms of energy are solar energy, electrical energy, chemical energy, thermal energy, wind energy, nuclear energy etc.
The Law of Conservation of Energy states that energy cannot be destroyed but can only be transformed or converted from one form to another.
According to the law of conservation of energy, we can infer or deduce that the total energy of the system must stay the same because it cannot be destroyed, but kinetic energy (KE) can be transformed to potential energy (PE) and potential energy (PE) can be transformed to kinetic energy (KE) within the system.
If velocity is Hositive, which would most likely yield a negative acceleration?
O A final velocity that is faster than an initial velocity.
O A time that is less than a half hour.
O An initial velocity that is faster than a final velocity.
O A time that is greater than a half hour.
Answer:
A final velocity that is faster than an initial velocity.
Explanation:
The acceleration of an object is given by :
[tex]a=\dfrac{v-u}{t}[/tex]
Where
v is final velocity and u is initial velocity
t is time taken
If the final velocity is more than the initial velocity, the acceleration is positive. So, the correct option is (a).
1. The mechanical energy of the pendulum at the highest point equals
a. kinetic energy only.
b. kinetic energy x potential energy.
c. potential energy only.
d. zero.
Answer:
c. potential energy only
Explanation:
at highest point the body will having some height and gravitational force will work on it.
since the velocity at highest point will be zero therefore there will no kinetic energy
1. A vehicle of mass 1500 kg braked to a standstill from a
velocity of 24 m/s in 12 s.
i. Show that the deceleration of the vehicle was 2.0 m/s2.
ii. Calculate the resultant force on the vehicle.
Explanation:
i. Vi=24
Vf=0
t= -2
a=vf-vi/t =0-24/12 = -2m/S2
ii. F=ma = 1500×-2= -3000 N
What is energy and what is the formula of energy
Answer:
Energy is: the ability to do work
The formula for energy is: power x time = energy
Explanation:
Hope this helps (there isn't really an explanation)
Temperature is the average amount of energy of motion in each particle of a substance. It is a measure of how loud or quiet a substance is. true of false
Answer:
fhddjdhdjndvdbhd honcho highchair suck Vicki
Donald claims that he will always have more momentum than Jason because Donald has twice the mass of
Jason. Is Donald correct? Why or why not?
Answer:he is correct
Explanation: when Donald runs all his weight is moving at the same speed so when all that weight hits a stopped object the weight will transfer its force into that object Kinda like how a truck hits a car
Please help ASAP!!
The velocity-time graph of a particle moving in a straight line is shown in a figure. Find the distance travelled by the particle in the time interval t = 0 and t= 10 s.
Answer:
40 m
Explanation:
The area under v-t graph gives the distance travelled by the particle.
Distance = area of ΔOBC + area of ΔCDE + area of ΔEFG
[tex]=\dfrac{1}{2}\times 4\times 10+\dfrac{1}{2}\times 2\times 10+\dfrac{1}{2}\times 4\times 5\\\\=40\ m[/tex]
So, the distance travelled by the particle in the time interval t = 0 and t= 10 s is equal to 40 m.
If a charge of 40kC flows through an electrical heater and the amount of energy converted into heat is 10MJ. Calculate the potential difference across the ends of the heater.
Answer:
Energy Transfer Quiz - Quiz
The diagram shows a heater above a thermometer. The thermometer bulb is in the position shown.
HELPPP ILL GIVE BRAINLIST
Answer:
1= Kidneys
2= Ureters
3=Bladders
4=Urethra
Explanation:
Functions of kidney: Regulations of water balances, excretions of nitrogenous wastes(urea)
Functions of Liver: Detoxifications, protein synthesis
Functions of Skin: Temperature regulations, Metabolic functions, Excretion
Functions of lungs: Respiration, Water balance regulations
Tip: If you want faster and correct answers you should label your questions under the correct subject.
how does a dragline excavator work
Brass is made by melting a mixture which contain 67% by mass of copper and 33% by mass of zinc if no change in volume.Calculate the density of brass
Answer:
The density of brass is approximately 8,261.73 kg/m³
Explanation:
The percentage composition by mass of brass is given as follows;
The percentage by mass of copper = 67%
The percentage by mass of zinc = 33%
The density of copper, ρ₁ = 8.96 g/cm³
The density of zinc, ρ₂ = 7.133 g/cm³
Therefore, where we have, m = 100 g of brass, we have;
The mass of copper, m₁ = 67 g
The volume of copper, V₁ = m₁/ρ₁
∴ V₁ = 67 g/(8.96 g/cm³) ≈ 7.47767857 cm³
The volume of zinc, V₂ = m₂/ρ₂
∴ V₂ = 33 g/(7.133 g/cm³) ≈ 4.62638411 cm³
The volume of the brass, V = V₁ + V₂
V = 7.47767857 cm³ + 4.62638411 cm³ ≈ 12.104 cm³
The density of brass, ρ = m/V
∴ ρ = 100 g/(12.104 cm³) ≈ 8.26 g/cm³
The density of brass, ρ ≈ 8.26 g/cm³ = 8,261.73 kg/m³
A car accelerates for 10 seconds. During this time, the angular
velocity of the wheels of the car increases from 10 rad/s to 25 rad/s.
What is the angular acceleration of the wheels during this time?
e
Answer:
the angular acceleration of the car is 1.5 rad/s²
Explanation:
Given;
initial angular velocity, [tex]\omega_i[/tex] = 10 rad/s
final angular velocity, [tex]\omega_f[/tex] = 25 rad/s
time of motion, t = 10 s
The angular acceleration of the car is calculated as follows;
[tex]a_r = \frac{\omega_f - \omega_i }{t} \\\\a_r = \frac{25-10}{10} = 1.5 \ rad/s^2[/tex]
Therefore, the angular acceleration of the car is 1.5 rad/s²
A stone is thrown vertically upward with an initial velocity of 40m/s. Taking g = 10 m/s^2 find the maximum height reach by the stone and what is the net displacement and distance covered by the stone.
Explanation:
u=40
v=?
h=?
v²-u²=2gs
0²-40²=2×10×s
160=20s
s=160/20
=80m/s
total distance= upward distance ×downward distance
=80+80
=160m
total displacement=0 because u and v is the same.
Answer:
The maximum height is 80 m and the total distance covered by the stone is 160 m and the displacement is zero.
Explanation:
Final velocity v = 0
Initial velocity u = 40m/s
We know that,
Using equation of motion
[tex]v^{2} =u^{2} +2gh[/tex]
[tex]0-40^{2} =2[/tex] × [tex]10[/tex] × [tex]h[/tex]
The maximum height is:
[tex]h=80[/tex] [tex]m[/tex]
The stone will reach at the top and will come down
Therefore, the total distance will be:
[tex]s=h_{1} +h_{2}[/tex]
[tex]s=80m-80m=160m[/tex]
The net displacement is:
[tex]D=h_{1} -h_{2}[/tex]
[tex]D=80m-80m=0[/tex]
Hence, The maximum height is 80 m and the total distance covered by the stone is 160 m and the displacement is zero.
hope this helps.....
At the local grocery store, you push a 14.5-kg shopping cart. You stop for a moment to add a bag of dog food to your cart. With a force of 12.0 N you now accelerate the cart from rest through a distance of 2.29 m in 3.00 s. What was the mass of the dog food?
Answer:
The mass of the dog food added is 9.03 kg
Explanation:
Given;
mass of the shopping cart, m₁ = 14.5 kg
let the mass of the bag added = m₂
the force applied, F = 12 N
initial velocity of the cart-bag system, u = 0
distance traveled by the system, d = 2.29 m
time of motion of the system, t = 3.0 s
The acceleration of the system is calculated as;
[tex]d = ut + \frac{1}{2} at^2\\\\2.29 = 0 + (\frac{1}{2} \times 3^2)a\\\\2.29 = 4.5 a\\\\a = \frac{2.29}{4.5} \\\\a = 0.51 \ m/s^2[/tex]
The total mass of the system (M) is calculated as follows;
F = Ma
M = F/a
M = (12)/(0.51)
M = 23.53 kg
The mass of the dog food added is calculated as;
m₂ = M - m₁
m₂ = 23.53 kg - 14.5 kg
m₂ = 9.03 kg
digestion that takes place in the mouth.
DO U KNOW CARRYMINATI
Suggest one reason why the experiment might not have given a correct value for
the specific heat capacity of the metal.
Answer:
It is because some of the heat is lost in the surroundings.
Explanation:
To calculate the specific heat of the metal, the following steps are performed.
Take a piece of metal whose mass and the initial temperature is known.
Now take a beaker filled with some measured amount of water and the temperature of water is known.
Drop the heated metal piece in the water so that the equilibrium is reached.
According to the principle of calorimetery,
Heat lost by the metal = heat gained by the water
here, some of the heat is lost in the surroundings so we don't get the correct value of the specific heta of the metal.
A truck travelling at 30m/s decelerates at 1.5m/s². How far does it travel during the 10th second after the brakes are applied?
Answer
225 meters.
Explanation:
x=x0+30t-(1/2)(1.5)t^2
x=0+30(10)-(1/2)(1.5)(10)^2
x=300-75
x=225
True or false please help I’ll give brainliest
Answer:
All of them are false
Explanation:
4. electrons flow from earth to the object
5. electrons move freely
6. protons can't move
Answer:
They all false
Two wires made of the same material are connected in parallel
across the mains. The length and radius of one wire is two
times that of the other wire. If heat produced in the shorter wire
is 100 J, then the heat produced in the longer wire is:-
O A. 100 J
B. 180 J
O C. 2003
O D. 420 J
Answer:
The heat produced in the longer wire is 200 J.
Explanation:
When the two wires are connected in parallel then the voltage across both the wires is same.
Let the length of the second wire is L and the radius of the second wire is R.
The length of the first ire is 2L and the radius of the first wire is 2R.
Heat produced in the second wire is 100 J.
Let the heat produced in the first wire is H'.
The resistance of the wire is proportional to length of the wire and inversely proportional to the area of the wire.
[tex]\frac{R_2}{R_1}=\frac{L\times \pi\times 4R^2}{2L\times \pi\times R^2}\\\\\frac{R_2}{R_1}=2[/tex]
The heat produced is given by
[tex]H=\frac{V^2}{R}\\\\\frac{H_1}{H_2}=\frac{R_2}{R_1}\\\\\frac{H_1}{100}=2\\\\H_1=200 J[/tex]
a
c) Determine the coefficient of static friction required to produce
net force of 6.0N?
Determine the coefficient of static friction to produce net force of 6.0N?
i think the data is not complete but that's according to me
what is gravity..
what is force.
mention the two type of force
and give 3,3 exmples
Answer:
Oh, umm…
Jump! (The higher, the better!)
Drop your pencil! (or pen or ruler, whichever you prefer!)
Throw a ball of paper! (and make sure you pick it back up later!)
Explanation:
if you satisfied to my answer , just put brainliest please , and ur welcomeee♥️♥️
Kinetic and potential energy are related
a.) indirectly
b.) inversely
c.) directly
d.) Both A and B
A force of 20000N acts on the raft in the direction down
State the name given to the force shown by arrow in Fig.
Calculate the mass of the raft.
Answer:
Figure is not there
Explanation: