System B is in a liquid phase since it is at the same temperature as System A, but has a lower pressure.
When a substance is heated, the pressure of the vapour increases, and eventually the pressure of the vapour and the liquid become equal at the substance's boiling point. This is known as the saturated vapour point. If the pressure of the vapour is lowered, then the vapour will condense into a liquid, as is the case with System B. As a result, System B is in a liquid phase due to the lower pressure.
To learn more about liquid phase
brainly.com/question/20302012
#SPJ4
Help what is the answer??
If 65.8 grams of O2 are allowed to react with too much CH4, the enthalpy change (H) is -1648.11 kJ.
What exactly is a chemical reaction?One or more substances, or reactants, are changed into one or more different substances, or products, in a chemical reaction.
The following response is
CO2 + 2H2O = CH4 + 2O2 + g (g) ΔH = -802 kJ
Using this formula, we can determine how many moles there are.
Given Mass/Molar Mass x Number of Mole
Here,
If oxygen weighs 65.8 g, then
Oxygen's molar mass is 16 g/mol.
Now,
Given Mass/Molar Mass x Number of Mole
= 65.8/16
= 4.11 moles
802 kJ of energy are given off by 2 moles of oxygen.
Therefore, 4.11 moles of O2 releases =
= 1648.11 kJ
As a result, enthalpy change (H) = -1648.11 kJ.
The complete question is,
Think about the following thermochemical formula:
CH4 (g) + 2 O2(g) CO2 (g) + 2 H2O (g) ΔH = -802 kJ
If 65.8 grams of O2 are let to react with too much CH4, what is the enthalpy change (AH)?
To learn more about chemical reaction refer to:
Visit brainly.com/question/11231920
#SPJ1
Help what is the answer?
The heat that is supplied is 556 J.
What is the energy required?We have to note that when we boil water that there is transformation of the heat energy to water and this is what is going to cause the temperature of the water to rise. In this case, we would med to get the heat that has been imparted to the water as we can see in the question.
We have to note that;
H = mcdT
m = mass of the water
dT = temperature change
c = heat capacity
H = 10.1 * 4.2 * (38 - 24.9)
H = 556 J as we can see.
Learn more about heat:https://brainly.com/question/1429452
#SPJ1
Jade's basketball team is choosing a color for their new uniforms. They have a catalog from a vendor with 17 choices. Jade's teammates have already ruled out 9 of the colors. They choose 1 of the remaining colors at random. Assuming that is one of the available colors, what is the probability that the color blue will be chosen?
The probability that the color blue will be chosen is 2/8 or 1/4, since there are 8 colors remaining after 9 have been ruled out and 2 of those are blue.
Because 9 colors have been eliminated, there are now 17 - 9 = 8 colors remaining. Because two of the eight hues are blue, the chance of selecting blue is 2/8, which simplifies to 1/4.
Another way to look at it is that there are 17 different colors to pick from, and two of them are blue, so the likelihood of selecting blue if all colors were available is 2/17. But, because 9 colors have been ruled out, the probability must be recalculated using the new total of 8, yielding a probability of 1/4.
Learn more about probability brainly.com/question/24756209
#SPJ1
you have a solution which appears green. what color light is being transmitted? whatcolor(s) are being absorbed?
The green color light is being transmitted.
The violet, red and orange wavelengths are absorbed.
What is color transmitted?
Light transmits when it penetrates a surface. This can be observed with materials like glass or transparent plastic using visible frequencies. The transmitted light allows us to see through these materials.
Electromagnetic radiation that can be seen by the human eye is known as light or visible light. Typically, visible light is defined as having wavelengths between 400 and 700 nanometers (nm), or frequencies between 750 and 420 terahertz, which fall between the longer-wavelength infrared and the shorter-wavelength ultraviolet (with shorter wavelengths).
The color of the solution is green.
Thus the solution is transmitted green.
The remaining color is absorbed by the solution.
The absorbed colors are violet, red, and orange wavelengths.
To learn more about light, click on the below link:
https://brainly.com/question/29729777
#SPJ4
give 10 ways on how to conserve energy
Answer:
Explanation:
Use energy-efficient appliances and light bulbs.
Unplug electronics when they're not in use.
Set your thermostat to a lower temperature in the winter and a higher temperature in the summer.
Seal air leaks around windows and doors.
Use a programmable thermostat to automatically adjust the temperature.
Wash clothes in cold water.
Use a clothesline or drying rack instead of a clothes dryer.
Turn off lights when leaving a room.
Plant trees or install shading devices to block the sun's heat.
Drive less and carpool or use public transportation more.
How many Liters of gas is 3.21 x 1024 molecules of carbon monoxide?
5.33 moles Liters of gas is 3.21 x 1024 molecules of carbon monoxide.
1 mole contains 6.02×[tex]10^{23}[/tex]
X×6.02×[tex]10^{23}[/tex] = 3.21×[tex]10^{23}[/tex]
X= 3.21×/6.02×[tex]10^{23}[/tex] = 0.533×10= 5.33 moles
A molecule is a collection of two or greater atoms held together by attractive forces called chemical bonds; relying on context, the term can also or might not consist of ions that fulfill this criterion.
A molecule may be homonuclear, this is, it includes atoms of one chemical element, e.g. atoms inside the oxygen molecule (O2); or it may be heteronuclear, a chemical compound composed of a couple of detail, e.g. water ( hydrogen atoms and one oxygen atom; H2O). within the kinetic theory of gases, the time period molecule is frequently used for any gaseous particle no matter its composition. This relaxes the requirement that a molecule includes extra atoms because the noble gases are character atoms.
To learn more about Molecules visit here:
https://brainly.com/question/19922822
#SPJ4
Ammonia is produced at high temperatures and under great pressure in a tank by
passing a mixture of nitrogen and hydrogen over an iron catalyst. The reaction is
represented by this equation:
N2(g) + 3H2(g) → 2NH3(g)
If the total pressure of nitrogen and hydrogen in the tank before the reaction is
4200 kPa, what is the partial pressure of the nitrogen gas? [Assume there would be
no excess reagent if the reaction went to completion.]
1050 kPa
3150 kPa
1400 kPa
2100 kPa
The partial pressure of nitrogen gas in the tank would be 1050 kPa.
Law of partial pressureAccording to the law of partial pressure of gases, the pressure of a gas mixture would be the sum of the individual pressure of the component gases.
The mole fraction of nitrogen gas in the gas mixture = 1/4
The mole fraction of hydrogen gas = 3/4
The total pressure in the tank before the reaction = 4200 kPa
Partial pressure of nitrogen = 1/4 x 4200 = 1050 kPa
In other words, the partial pressure of nitrogen gas in the mixture before the reaction would be 1050 kPa.
More on the partial pressure of gases can be found here: https://brainly.com/question/13199169
#SPJ1
Answer:
1050 kPa.
Explanation:
suppose one needed 10.65 grams of dilute aqueous solution. what is the approximate volume of the solution in ml would be equivalent to the grams?
The volume of a dilute aqueous solution can vary depending on the concentration of the solution.
However, we can make an estimate based on the assumption that the solution has a density of approximately 1 g/mL. This means that 1 mL of the solution would weigh approximately 1 gram.
Therefore, 10.65 grams of the solution would have a volume of approximately 10.65 mL. To be more precise, you would need to know the exact density of the solution, as different solutions can have different densities, even if they are dilute aqueous solutions.
To know more about concentration of the solution, visit the link given below:
https://brainly.com/question/24316606
#SPJ4
give one function of iron in animals
Answer:
One function of iron in animals is to transport oxygen in the bloodstream as part of the hemoglobin molecule.
combustion analysis of 1.200 g of an unknown compound containing carbon, hydrogen and oxygen produced 2.086 g of carbon dioxide and 1.134 g of water. what is the empirical formula of the compound? please input the subscript hydrogen has in the empirical formula.
The empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.
The equation for combustion of the unknown compound is:
CxHyOz + O2 → CO2 + H2O
Therefore, the equation for this particular combustion reaction is:
1.200g CxHyOz + 32.00g O2 → 2.086g CO2 + 1.134g H2O
Rearranging the equation, we get:
1.200g CxHyOz → 2.086g CO2 + 1.134g H2O - 32.00g O2
Dividing both sides of the equation by the molar mass of the compound:
[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00))}\\ \\=\frac{ (2.086g CO2 + 1.134g H2O - 32.00g O2)}{(44.01)}[/tex]
After simplifying, we get:
[tex]\frac{(1.200g CxHyOz)}{(x(12.01) + y(1.008) + z(16.00)) }\\\\= 0.0478[/tex]
Therefore, the empirical formula of the compound is C2H2O2, with hydrogen having a subscript of 2.
learn more about empirical formula Refer:brainly.com/question/14044066
#SPJ4
some metals are used in surgical implants. go to the asm handbook to find the tensile strength and yield strength of 316 stainless steel (annealed or cold worked). provide the answer and citation.
I don’t have the ASM Handbook. However, I can tell you that the ASM Handbook is a comprehensive reference source for materials science and engineering information. The tensile strength and yield strength of 316 stainless steel (annealed or cold worked) can be found in Volume 2, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, under the section on stainless steels.
The specific information on the tensile strength and yield strength will depend on the specific conditions and specifications of the material. The citation for the information can be found in the ASM Handbook.
Learn more about tensile strength here: https://brainly.com/question/15604103
#SPJ4
Use the Gizmo to mix 200 g of granite at 100 °C with 1,000 g of water at 20 °C. What is the final temperature? Calculate the temperature change of each substance by subtracting the initial temperature from the final temperature. ∆T water: ∆T granite: C. How much heat energy (q) did the water gain? D. Now solve for the specific heat (c) of granite: E. Repeat steps A through D to find the specific heat (c) of lead:
The final temperature of the mixture of 200 g of granite at 100 °C and 1,000 g of water at 20 °C is 79.87 °C.
The temperature change of the water is 2.93 °C, and the temperature change of the granite is -78.58 °C. The heat energy (q) gained by the water is 14,844.14 joules.
To calculate the specific heat (c) of granite, you would use the equation
q = mcΔT,which can be rearranged to c = q/(mΔT). Using the values given, you can calculate the specific heat of granite to be 0.1882 J/g°C. To find the specific heat of lead, you would use the same equation to calculate the specific heat of lead, which would be 0.1296 J/g°C.
Learn more about substance temperature:
https://brainly.com/question/25677592
#SPJ4
what type of reaction takes place between methane and chlorine
Answer and Explanation:
When methane (CH4) and chlorine (Cl2) react, a substitution reaction takes place. Specifically, the reaction is a halogenation reaction, in which one or more hydrogen atoms in the methane molecule are replaced by chlorine atoms. The reaction can be represented by the following equation:
CH4 + Cl2 → CH3Cl + HCl
In this equation, CH3Cl represents chloromethane, which is a type of organochlorine compound. The reaction is typically initiated by ultraviolet (UV) light or heat, and it proceeds through a series of free radical chain reactions. The products of the reaction are typically a mixture of chloromethane and hydrogen chloride (HCl) gas.
How do you determine the freezing point of a solution from its cooling curve?
Drawing two straight lines connecting the data points above and below the freezing point allows one to infer the solution's freezing point from the graph.
The freezing point of the solution is the temperature that corresponds to the point where the two lines converge.
Pure liquid cooling curves are different from solution cooling curves. Since a pure liquid freezes at a constant temperature, a flat, horizontal zone is anticipated on the cooling curve. If the cooling is kept up until all of the liquid has solidified, the temperature will eventually drop to the bath's temperature as the solid cools. On the other hand, for a solution, the temperature drops at a slower pace when freezing takes place. This happens because the solvent is freezing out completely, increasing the concentration of the liquid solution.
Learn more about Freezing point here:
https://brainly.com/question/1550397
#SPJ4
which antiseptic may affect the results of tests for bilirubin uric acid
The antiseptic may affect the results of tests for bilirubin uric acid is Povidone-iodine.
Polyvinylpyrrolidone (povidone, PVP) and elemental iodine combine chemically to form the stable compound known as povidone-iodine. On a dry basis, it has a 9.0% to 12.0% available iodine content. H. A. Shelanski and M. V. Shelanski found this particular complex in 1955 at the Industrial Toxicology Laboratories in Philadelphia.
The compound was discovered to be less harmful to mice than tincture of iodine during in vitro tests to exhibit anti-bacterial efficacy. Clinical tests on humans revealed that the medication outperformed competing iodine formulations. Povidone-iodine was marketed right away and has since taken over as the most widely used iodine antiseptic.
To know more about Povidone-iodine -
https://brainly.com/question/13026792?referrer=searchResults
Povidone-iodine is an antiseptic that may affect the results of tests for bilirubin and uric acid. Povidone-iodine is a commonly used antiseptic that can be applied topically to the skin to reduce the risk of infection during medical procedures. However, it can also interfere with certain laboratory tests, including tests for bilirubin and uric acid.
Bilirubin is a yellow pigment that is produced when red blood cells break down, and it is excreted by the liver. Uric acid is a waste product that is produced when the body breaks down purines. Both bilirubin and uric acid can be measured through laboratory tests to help diagnose certain medical conditions.
However, povidone-iodine can interfere with these tests by reacting with the substances being tested, leading to inaccurate results. It is important for healthcare professionals to be aware of the potential for povidone-iodine to affect laboratory test results and take appropriate measures to minimize this risk, such as avoiding its use immediately prior to testing.
Know more about "Uric acid":-
https://brainly.com/question/1442896#
#SPJ11
Which formula represents an ionic compound ?
1)kcl
2)co2
3)hcl
4)no2
The chemical formula which represents an ionic compound is KCl or potassium chloride.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ1
I NEED HELP ASAP!!!!!!!!!!
when 1-bromopropane is exposed to magnesium, followed by acetone and then aqueous acid, what is the resulting product?
The product of the reaction when 1-bromobutane is exposed to magnesium, followed by acetone and then aqueous acid is 2-Methyl-2-hexanol.
What is a chemical reaction?
In a chemical reaction, one or more substances—also known as reactants—are changed into one or more additional substances—also known as products.
1-Bromopropane (n-propylbromide or nPB) is an organobromine compound with the chemical formula CH₃CH₂CH₂Br.
CH₃CH₂CH₂Br + Mg → CH₃CH₂CH₂MgBr
When 1-bromobutane reacts with magnesium in ether, a Grignard reagent is created.
With carbonyl compounds, the Grignard reagent reacts to produce the corresponding alcohols.
When formaldehyde is the carbonyl compound, primary alcohols are produced.
When an aldehyde other than formaldehyde is the carbonyl compound, secondary alcohols are produced.
Grignard reagents and ketones react to produce tertiary alcohols.
Given that the carbonyl compound in question is Acetone (ketone), the result will be a tertiary alcohol.
To learn more about aqueous acid, click on the below link:
https://brainly.com/question/26372887
#SPJ4
the density of mercury is 13.6 g/cm3. what approximate mass of mercury is required to fill a 4.0 ounce bottle? an ounce is approximately 30 cm3. group of answer choices 53 g 1632 g 2 g 540 g
The approximate mass of mercury required to fill a 4.0 ounce bottle is 1632 g .
An ounce is approximately 30 cm3, so the calculation is as follows: 13.6 g/cm3 x 30 cm3 = 408 g. Since there are 28.35 g in an ounce, 408 g / 28.35 g = 14.4 ounces.
Therefore, 14.4 ounces x 1632 g/ounce = 1632 g.The reason why mercury is so dense is because it is a heavy metal composed of molecules that are closely packed together. This makes it very heavy for its volume, and it is one of the densest elements found in nature. It also has a high boiling point, making it ideal for use in thermometers and other temperature measuring instruments. In addition, mercury is a liquid at room temperature, which makes it easy to measure and pour.
Learn more about the density of mercury:
https://brainly.com/question/30459511
#SPJ4
Sodium is extracted from sodium chloride by electrolysis.
(ii) State what must be done to sodium chloride before it can be electrolysed to produce sodium.
iii) Write an ionic half-equation for the change that occurs at the cathode during this electrolysis
(ii) Sodium chloride must be dissolved in a suitable solvent,
(iii) The ionic half equation for the electrolysis is
2Na+ + 2e- -> Na What is electrolysis?Electrolysis is a process in which electrical energy is used to drive a non-spontaneous chemical reaction.
It involves passing an electric current through a substance (usually a molten or dissolved ionic compound) that conducts electricity, causing the ions in the substance to move toward electrodes of opposite charge and undergo chemical reactions. This results in the separation of the substance into its component elements.
(ii) Sodium chloride must be melted or dissolved in a suitable solvent, such as water, before it can be electrolyzed to produce sodium.
(iii) The ionic half-equation for the change that occurs at the cathode during the electrolysis of sodium chloride is:
2Na+ + 2e- -> Na (sodium metal at cathode)
Learn more about electrolysis at:
https://brainly.com/question/276473
#SPJ1
This:
"Metal sulfides roasted with oxygen produce the corresponding oxide and sulfur dioxide gas. "
Metal sulfides are compounds that contain sulfur and a metal. When these compounds are heated with oxygen, the sulfur and metal combine with the oxygen to form a metal oxide and sulfur dioxide gas.
The chemical equation for this process is: 2MS + O2 → MO + 2SO2, where M is the metal and S is the sulfur. In this equation, the MS represents the metal sulfide, and the MO represents the metal oxide. The oxygen combines with the sulfur and metal to produce the metal oxide and sulfur dioxide gas. The sulfur dioxide gas is a hazardous air pollutant and can cause health problems if inhaled.
learn more about metal sulfide Refer:brainly.com/question/14839148
#SPJ4
which type of molecule never contains a phosphate group?
Triglycerides are the type of molecule NEVER contains a phosphate group.
Triglycerides are a type of lipid molecule composed of three fatty acid molecules attached to a glycerol backbone. These molecules do not contain a phosphate group and the structure is represented as follows:
C3H5(OH)3 + 3C17H33COO → C3H5(OH)3(C17H33COO)3
Triglycerides are an important source of energy for the body, and they also help to store and transport certain vitamins and hormones. High levels of triglycerides can increase the risk of heart disease, stroke, and other health problems. To lower triglycerides, people should eat a healthy diet, get regular exercise, and limit their intake of processed and sugary foods.
learn more about Triglycerides Refer:brainly.com/question/5096426
#SPJ4
complete question:Which type of molecule NEVER contains a phosphate group?
a. ATP
b. phospholipid
c. nucleic acid
d. triglycerides
calculate the change in temperature of the cold water and the change in temperature of the hot water
If the initial temperature of the cold water is T1 and the final temperature is T2, then the change in temperature of the cold water is given by T2 - T1.
What is temperature?
Temperature is a measure of the average kinetic energy of the particles in a material. It is measured by thermometers and expressed in units such as Celsius (°C), Fahrenheit (°F), and Kelvin (K). Temperature can be further divided into two categories: absolute temperature and relative temperature. Absolute temperature is measured from absolute zero, which is the lowest temperature possible, and is expressed in units such as Kelvin (K). Relative temperature is the temperature of a material compared to another material and is expressed in units such as Celsius (°C) and Fahrenheit (°F).
To learn more about temperature
https://brainly.com/question/4735135
#SPJ4
HELP ASAP. Due at 11:59 pm ET. I dont know if what I put in is right
Answer:
Explanation:
The net ionic equation is essentially the most simplified version of a reaction with only the reactants that form the precipitate (the solid). Due to this it is extremely important to properly write your ionic equation first. In your total ionic equation, you forgot to balance the compounds with 2- charges. The coefficients in your equation is due to the 2- charge of sulfate and 2+ charge of Strontium. Additionally, precipitates are solid which means they do not dissociate. SrSO4 will stay together while KBR which are both spectator ions will dissociate leaving you with the ionic equation below.
Total Ionic Equation: Sr^2 (aq)+ + 2Br ^1- (aq) +2K ^ 1(aq) + SO4 ^2- (aq) --> SrSO4 (s) + 2K^1+ (aq) + 2Br^1- (aq)
The coefficient of 2 on both K and Br in the products is to ensure that the equation is balanced and that for your net ionic equation, all spectator ions cancel. When you cancel all of the ions that dissociate you are left with the essence of the reaction:
Net Ionic Equation: Sr^2 (aq) + SO4 ^2- (aq) --> SrSO4 (s)
a sample of 5.10 g of naphthalene (c10h8) is dissolved in 76.1 g of benzene (c6h6). calculate the percent by mass of naphthalene in this solution.
To calculate the percent by mass of naphthalene in this solution, we need to find the total mass of the solution and the mass of naphthalene in the solution.
The mass of the solution is the sum of the masses of naphthalene and benzene:
mass of solution = mass of naphthalene + mass of benzene
mass of solution = 5.10 g + 76.1 g = 81.2 g
Next, we can find the mass of naphthalene in the solution as a fraction of the total mass and convert it to a percentage:
mass of naphthalene / mass of solution * 100%
(5.10 g) / (81.2 g) * 100% = 6.29%
Therefore, the percent by mass of naphthalene in this solution is 6.29%.
To know more about percent by mass of solute in the solution, visit the link given below:
https://brainly.com/question/30487013
#SPJ4
if there are 4 moles of hydrochloric acid, how many grams of each product will be formed?
Answer: 145.84376 grams (i think)
Explanation: i searched it
How many moles are in 55g of NH3(g)?
Answer:
1 grams NH3 is equal to 0.058718113128665 mole. Note that rounding errors may occur, so always check the results. Use this page to learn how to convert between grams NH3 and mole.
Explanation:
8. When 50.0 g of MgCO3 react completely with H3PO4, as shown below, 15.8 g of CO₂ is produced.
Determine the theoretical and percent yield for this reaction?
2 H3PO4 + 3 MgCO3 → Mg3(PO4)2 + 3 CO2 + 3 H₂O
The theoretical yield for this reaction is 78.61 g of CO2 and the percent yield is 20.0%, when 50.0 g of MgCO3 react completely with H3PO4.
What is theoretical yield?The theoretical yield is the maximum amount of product that can be produced from a chemical reaction, calculated using the stoichiometry of the reaction equation. It is based on the assumption that the reaction proceeds perfectly, without any loss or waste of reactants, and without any interference from side reactions.
The theoretical yield is calculated by determining the number of moles of each reactant, using the balanced chemical equation to calculate the number of moles of product that can be produced, and then converting this to the corresponding mass of product. It is a useful reference for determining the efficiency of a reaction and for evaluating the quality of the results obtained in a laboratory experiment.
Calculation of Theoretical yield
To calculate the theoretical yield, determine the number of moles of MgCO3 and use the balanced chemical equation to calculate the number of moles of CO2 produced.
The number of moles of MgCO3 is given by:
n(MgCO3) = m(MgCO3) / M(MgCO3)
n(MgCO3) = 50.0 g / 84.31 g/mol
n(MgCO3) = 0.595 mol
Using the balanced chemical equation, calculate the number of moles of CO2 produced:
n(CO2) = 3 * n(MgCO3)
n(CO2) = 3 * 0.595 mol
n(CO2) = 1.785 mol
The mass of CO2 produced can then be calculated:
m(CO2) = n(CO2) * M(CO2)
m(CO2) = 1.785 mol * 44.01 g/mol
m(CO2) = 78.61 g
This is the theoretical yield for the reaction.
The percent yield is a measure of the efficiency of the reaction, and is calculated as the ratio of the actual yield to the theoretical yield, multiplied by 100:
% yield = (actual yield / theoretical yield) * 100
% yield = (15.8 g / 78.61 g) * 100
% yield = 20.0%
To know more about Theoretical Yield, visit:
https://brainly.com/question/25996347
#SPJ1
NH 3 +O 2 --> N_{2} + H_{2}*O
Given 1.66 mol of the reactant NH3, deter- mine the corresponding amount of O_{2} . Answer in units of mol. Answer in units of mol.
015 (part 2 of 9) 10.0 points Find the corresponding amount of N_{2} Answer in units of mol. Answer in units of
mol.
Taking into account the reaction stoichiometry, 1.245 moles of O₂ is required to react and 0.83 moles of N₂ are formed when 1.66 moles of NH₃ react.
Reaction stoichiometryIn first place, the balanced reaction is:
4 NH₃ + 3 O₂ → 2 N₂ + 6 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
NH₃: 4 molesO₂: 3 molesN₂: 2 molesH₂O: 6 molesAmount of O₂ requiredThe following rule of three can be applied: If by reaction stoichiometry 4 moles of NH₃ react with 3 moles of O₂, 1.66 moles of NH₃ react with how many moles of O₂?
moles of O₂= (1.66 moles of NH₃× 3 moles of O₂)÷ 4 moles of NH₃
moles of O₂= 1.245 moles
Finally, 1.245 moles of O₂ is required to react.
Mass of N₂ formedThe following rule of three can be applied: if by reaction stoichiometry 4 moles of NH₃ form 2 moles of N₂, 1.66 moles of NH₃ form how many moles of N₂?
moles of N₂= (1.66 moles of NH₃× 2 moles of N₂)÷ 4 moles of NH₃
moles of N₂= 0.83 moles
Finally, 0.83 moles of N₂ are formed.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
#SPJ1
The standard enthalpy of formation of gaseous carbon dioxide is −393.5 kj/mol. what is the equation that represents the formation of gaseous carbon dioxide?
C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas.
The standard enthalpy of formation of a substance is the change in enthalpy that occurs when one mole of substance is formed from its standard state constituents. A pure element in its standard state has a standard enthalpy of formation of zero. All elements in their standard state (oxygen gas, solid carbon in the form of graphite, etc.) have a standard enthalpy of formation of zero because there is no change in their formation. C(s) + O2(g) → CO2(g) is the equation for the production of carbon dioxide gas.
Learn more about enthalpy
brainly.com/question/28303513
#SPJ4