suggest an explanation of why the concentration of the sulfuric acid increases.

Cf cannot be a chemical symbol of an element. Therefore, option B is correct.

The term an element is defined as a substance that cannot be broken down into a simpler format. They are separate by a unequaled atomic number. The elements are formed by their atomic number in the periodic table, which highlights elements with similar properties.

Cf cannot be a chemical symbol of an element. CO is the symbol of element cobalt. B is the symbol of element boron and Cu is the symbol of an element copper.

Thus, option B is correct.

To learn more about an element, follow the link;

https://brainly.com/question/13025901

#SPJ1

Your question is incomplete, most probably your answer was

Which of the following cannot be the chemical symbol for an element

a. co

b. cf

c. b

d. cu

Air escape from a tire when tire valve is opened because the pressure from the weight of the car is forcing the already pressurized air out .

When air is filled in tires, it get into more compact area than the outer atmosphere, therefore particles in tire are close to each other and exert pressure continuously on tire walls to get out of it. Thus, material of the tire need to be pressure resistant as much possible.

After opening the tire valve, air starts leaving with huge sound as strain outside the tire is weaker than that inside the tire. Molecules strike with the same force on larger area and pressure starts diminishing.

To know more about tire valve, refer

https://brainly.com/question/3720473

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: Air leaves a tire when the tire valve is opened because

A. the pressure outside the tire is lower than the pressure inside the tire.

B. the pressure outside the tire is greater than the pressure inside the tire.

C. the temperature is higher outside the tire than inside the tire.

D. there are more gas particles outside the tire than inside the tire.

A flask with a volume of 250.0 mL contains air with a density of 1.126 g/L. The mass of the air contained in the flask is 0.28 gram.

The density of a material is the measure of how tightly it is packed together. It is expressed as mass per unit volume. Density Symbol is D or

Formula Density = m/V, where is the density, m is the object's mass, and V is the object's volume.

Given:

Volume = 250.0 mL

Convert 250.0 mL in Liters :

250. 0 / 1000 = 0,25 L

Density = 1.126 g/L

Mass = g ?

Mass =  Density × Volume

Mass = 0.25 × 1.126

Mass = 0.28 gram

Thus, the mass of the air contained in the flask is 0.28 gram.

To learn more about density, follow the link;

https://brainly.com/question/29775886

#SPJ1

1876.5J is the amount of heat released. Heat is the energy that moves through one body to another when temperatures are different.

Heat is the energy that moves through one body to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with differing temperatures are brought together.

By transitioning through one physical state (or phase) to another, such as from a phase from solid to liquid (melting), from such a solids to a vapour (sublimation), from either a liquid to a vapour (boiling), either from from solid form to another, a substance can absorb heat without increasing in temperature (usually called a crystalline transition).

q=m×c×ΔT

q=99.7632× 0.45×(64.4°C-22.6°C )    

q=99.7632× 0.45×41.8=1876.5J

Therefore, 1876.5J is the amount of heat released.

To learn more about heat, here:

https://brainly.com/question/13411214

#SPJ1

Answer:

The edges changes quite drastically and the size went down by a millimeter. The color and hardness didn't change at all. The most noticeable difference was the edges.

This depends how much it costs per load of laundry.

For example:

If 1 load of laundry costs $2.50, this would mean that you need 10 quarters for one load. Multiply that by 10, and you get 100 quarters (the equivalent of $25).

Depending on how much the load costs, simply divide the price per load by .25 to get you total in quarters, then multiply it by 10 in this case.

Taking into account the definition of dilution, the volume of water added to 150cm³ of 0.5 M NaOH to produce 0.1 M solution is 600 cm³.

A dilution is a procedure whose purpose is to decrease the amount of solute per unit volume of dilution. This procedure is accomplished by adding a specified amount of diluent to a specified amount of solute.

The amount of solute does not change. As more solvent is added, the concentration of the solute decreases and the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where:

In this case, you know:

Replacing in the definition of dilution:

0.50 M× 150 cm³= 0.10 M× Vf

Solving:

(0.50 M× 150 cm³)÷ 0.10 M= Vf

750 cm³= Vf

If the initial volume is 150 cm³, the amount of volume of water added is calculated as:

Volume of water= Vf - Vi

Volume of water= 750 cm³ - 150 cm³

Volume of water= 600 cm³

In summary, the volume of water added is 600 cm³.

Learn more about dilution:

brainly.com/question/6692004

#SPJ1

Answer:

The percentage of IF₅ (by mole) in the final product mixture will be 50%. This is determined by the stoichiometry of the reaction, the given molar mass of the reactants, and the ideal gas law.

Explanation:

5.6 mol N₂O is equal to 5.6 mol. (Note: The chemical formula N₂O already specifies the number of moles, so including "mol" after the number is redundant.) The answer, rounded to two significant figures, is 5.6 mol.

A mole is a unit of measurement in chemistry that represents an amount of a substance. One mole is defined as the amount of a substance that contains Avogadro's number of entities, where Avogadro's number is defined as 6.02214076 x 10²³ particles. This number is used to convert between mass, number of particles, and moles of a substance.

For example, one mole of a pure substance contains 6.022 x 10²³atoms, molecules, or ions, depending on the nature of the substance. The mole is a useful way to measure large amounts of chemical substances while avoiding the use of cumbersome numbers.

To know more about Avogadro's number, visit:

https://brainly.com/question/28812626

#SPJ1

The abundance of resources means that there would be more individuals in the ecosystem.

When resources are abundant, competition for those resources is less intense. However, when resources become scarce, competition for them increases, and some species may become extinct or be displaced by more competitive species.

Again, availability of resources can also affect population growth. For example, if resources are abundant, populations of organisms may increase, leading to overcrowding and competition for limited resources. On the other hand, if resources are scarce, population growth may be limited.

Learn more about ecosystem:https://brainly.com/question/13979184?

#SPJ1

Answer:

A

Explanation:

Na2SO4 +BaCl2 ____BaSO4+2NaCl

Answer:

Excess Reactant

Explanation:

Limiting Reactant is the reactant the runs out first.

The IUPAC was founded in 1919 by academics and researchers who realized the need for chemical standardization. Therefore, in the below given ways molecules can be named.

The International Union of Pure as well as Applied Chemistry is abbreviated as IUPAC. It belongs to an international scientific publication with no government affiliation. The IUPAC works to develop chemistry by, among other things, establishing international quality standards for nomenclature, symbols, as well as units.

The IUPAC was founded in 1919 by academics and researchers who realized the need for chemical standardization. The International Union of Pharmaceutical Societies (IACS), the IUPAC's forerunner, convened in Paris in 1911 to discuss topics that needed to also be addressed.

CH[tex]_3[/tex] methane

CH[tex]_3[/tex]CH[tex]_3[/tex] ethane

CH[tex]_3[/tex]CH[tex]_2[/tex]CH[tex]_3[/tex] propane

Therefore, in the above given ways molecules can be named.

To learn more about IUPAC , here:

https://brainly.com/question/30086566

#SPJ1

Find out how many valence electrons there are in total. Step 2: Write down the molecule's skeleton structure. Step 3: Each bond in the skeleton structure is formed by using two valence electrons.

First, the sum of the valencies of each atom determines the total number of valence electrons in the molecule.

The Lewis dot structure gains electrons (number of electrons added equals magnitude of negative charge) if the molecule is an anion.

A Lewis electron dot diagram, also known as an electron dot diagram, Lewis diagram, or Lewis structure, is a way to show the valence electrons in an atom by placing dots around the symbol for the element. The number of valence electrons in the atom is depicted by the diagram's number of dots. The atom symbol is surrounded by dots that represent the electrons in the outer shell. These symbols are referred to as Lewis symbols and electron dot symbols.

Learn more about lewis structure:

brainly.com/question/28384183

#SPJ1

Some of the hazards that we should be aware of in the laboratory include the following: flammable substances, sharps (equipment that can cut or puncture skin) and fire. That is option A, B and E.

Laboratory hazards are those substances or equipments that are found in the laboratory which can cause harm to an individuals working in the laboratory.

Some of the hazards in the laboratory include chemical, biological, physical and radioactive hazards, as well as, musculoskeletal stresses.

Learn more about hazards here:

https://brainly.com/question/29546272

#SPJ1

Some of the hazards to be aware of in this lab include;

A Laboratory hazard is anything that has the potential to cause damage or harm.

Chemical, biological, physical, radioactive, and other possible risks are all present for those working in a laboratory, in addition to musculoskeletal strains. Many employees are more likely to sustain injuries because they are not aware of the dangers that could exist at work.

Some laboratory hazards include:

Learn more about laboratory hazards at: https://brainly.com/question/30369561

#SPJ1

The molar mass of H2O is 18.02 g/mol. Therefore, 122.4g is the mass of 6.80 moles H₂O. Water is a gaseous, liquid, as well as solid material.

Water is a gaseous, liquid, as well as solid material made of something like the chemical elements oxygen and hydrogen. It is one among the most abundant and necessary chemicals.

At room temp, it is a tasteless and odorless liquid with the critical capacity to dissolve several other compounds. Water's flexibility as either a solvent is critical to living creatures.

mass = moles × Molar mass

        = 6.80  × 18

         =122.4g

Therefore, 122.4g is the mass of 6.80 moles H₂O.

To learn more about water, here:

https://brainly.com/question/16630851

#SPJ1

Mass of 0.359 mol of KCI is calculated to be 26.79 g. Mass of a given chemical element or chemical compound (g) divided by the amount of substance (mol) is called molar mass.

Molar mass of a compound can be calculated by adding standard atomic masses of the constituent atoms.

The mass of 0.359 mol of KCI can be calculated by multiplying the number of moles by its molar mass:

mass = moles * molar mass

mass = 0.359 mol * 74.55 g/mol

mass = 26.79 g

So, the mass of 0.359 mol of KCI is 26.79 g.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

Answer: 26.79

Explanation:

179.43 g/mol is the maximum amount of CO₂ which could be formed from 3.67 mol of C and 4.23 mol of O₂.

What is chemical reaction?

When molecules in a reactant undergo a chemical reaction, their bonds are broken, and molecules in the product undergo a similar process, new bonds are created, creating a new substance.

We are surrounded by chemical reactions on a daily basis, whether it be in our bodies as they process food or in the sun as they produce the light we see. Prior to starting with chemical reactions, it's crucial to understand physical and chemical changes.

C + O₂ → CO₂

carbon =  12.01g/mol

12.01  × 3.67

= 44.07 g/mol

O₂ = 32/mol

= 32 × 4.23

= 135.36 g/mol

44.07 g/mol + 135.36 g/mol

= 179.43 g/mol

Thus, 179.43 g/mol is the maximum amount of CO₂ which could be formed from 3.67 mol of C and 4.23 mol of O₂.

To know more about chemical reaction  , click the link below ;

https://brainly.com/question/11231920

#SPJ1

The reaction has a first order in Cl 2 and a second order in NO. The general order of reactions is 2+1 = 3.

We must ascertain the values of the exponents n, m, and p as well as the rate constant, k, in order to derive a rate law. The values of the coefficients required to formulate the rate law are available to us if the reaction orders for a reaction are provided.

The reaction's rate law is rate, starting from the slow step

k'[NOCl2][NO] - (1).

Fast step is used to determine the concentration of NOCl 2, which is an intermediate.

[NOCl 2]=K[NO][Cl2] - (2)

Substitute (2) in (1)

rate=k'K[NO][Cl2][NO]

Hence, rate =k[NO]2[Cl]

The reaction has a first order in Cl 2 and a second order in NO. The general order of reactions is 2+1=3

To know more about concentration, visit:

https://brainly.com/question/17206790

#SPJ1

The amount of energy used by the refrigerator is given in J, kJ, and Cal as follows:

The conversion factor from kilowatt-hours to joules is given below:

1 kWh = 1000 * 3600 J

1 kWh = 3600000 J

The energy used by the frost-free refrigerator is given below as follows:

795 kWh = 795 * 3600000 J

795 kWh = 2.862 * 10⁹ J

795 kWh = 2.862 * 10⁹ J / 1k/J

795 kWh = 2.862 * 10⁶ KJ

1 Joule = 0.24 Cal

2.862 * 10⁹ J = 2.862 * 10⁹ J * 0.24 cal/J

2.862 * 10⁹ J = 6.86 * 10⁸ cal

Learn more about calories and Joules at: https://brainly.com/question/30193709

#SPJ1

N₂0₄ is the formula represents the binary molecular compound dinitrogen tetroxide. Therefore, option B is correct.

Binary molecular compounds are made up of exactly two nonmetal elements. HF, NO2, and P2O5 are a few examples. It is extremely simple to name binary molecular compounds. The first element is given its element name, followed by ide; the second element is given its root (hydr, bor, carb, ox, fluor, etc.).

In N₂0₄ molecule there are two nitrogen atoms at the suffix so, it is binary and in oxygen atom its suffix is 4 so, it is tetroxide. Therefore, N₂0₄ is the formula represents the binary molecular compound dinitrogen tetroxide.

Thus, option B is correct.

To learn more about the binary molecular compound, follow the link;

https://brainly.com/question/7960132

#SPJ1

Explanation:

The theoretical volume of ammonia that should be produced in the Haber process if we start with 5.0 L of nitrogen (N2) at standard temperature and pressure (STP) can be calculated as follows:

1 mole of N2 reacts with 3 moles of H2 to form 2 moles of NH3

Thus, the number of moles of N2 present can be calculated using the Ideal Gas Law:

PV = nRT

Where n is the number of moles of gas, R is the gas constant, T is the temperature in Kelvin, P is the pressure in atmospheres, and V is the volume in liters.

At STP (0°C and 1 atm), the volume of one mole of gas is 24.45 L.

Given 5.0 L of N2 at STP, the number of moles of N2 can be calculated as:

n = (PV)/RT = (1 atm)(5.0 L)/(0.0821 atmL/molK)(273 K) = 1.96 moles

The number of moles of NH3 produced can then be calculated as:

n = (2 moles of NH3)/(1 mole of N2) = 2 moles/1 mole = 2 moles

The volume of NH3 can be calculated as:

V = nRT/P = (2 moles)(0.0821 atmL/molK)(273 K)/(1 atm) = 44.8 L

So, the theoretical volume of ammonia (NH3) that should be produced if we start with 5.0 L of N2 at STP is 44.8 L.

The mass percent of the sugar would increase as the density is increasing.

There is a positive relationship between the mass percent of sugar and the density of a sugar solution. As the mass percent of sugar in a solution increases, the density of the solution also increases

. This occurs because sugar molecules have mass, and when more sugar is added to a solution, the total mass of the solution increases, resulting in a higher density. However, it is important to note that the relationship between the mass percent of sugar and density is not linear and is influenced by the temperature and pressure of the solution.

Learn more about density:https://brainly.com/question/29775886

#SPJ1

Dichotomous keys for the above can be:

A dichotomous key is a tool used to identify species of plants, animals, or other objects based on a series of choices between pairs of contrasting characters.

To create a dichotomous key, follow these steps:

Learn more on dichotomous key here: https://brainly.com/question/24807939

#SPJ1

State of emergency was proclaimed in Flint, the county seat of Genesee, by Michigan Governor Rick Snyder on January 5, 2016. Shortly after, President Barack Obama announced a federal state of emergency, approving further assistance from the Department of Homeland Security and the Federal Emergency Management Agency.

A public health emergency known as the Flint water crisis began in 2014 when the drinking water in Flint, Michigan was found to be tainted with lead and possibly Legionella bacteria. Flint switched its water source from treated Detroit Water and Sewerage Department water (obtained from Lake Huron and the Detroit River) to the Flint River in April 2014 due to a budget issue.

Learn more Flint water crisis here https://brainly.com/question/20987410

#SPJ1

Na is for sodium and SO4 is sulfate...

Answer: The chemical compound name for Na₂SO₄ is Sodium Sulfate.

Answer:

The reactant that determines how much product can be made

Explanation:

The limiting reactant in a chemical reaction is the one that is consumed first and restricts the amount of product that may be produced (or limiting reagent).

The block on your desk given that it measures 3 cm by 4 cm by 6 cm and has a mass of 184.32 grams is made of marble

To know what the block is made of, we shall determine the density of the block. Details below:

Density = mass / volume

Density of block = 184.32 grams / 72 cm³

Density of block = 2.56 g/mL cm³

Thus, from the calculation made above and also considering the table of densities given, we can conclude that the block is made of marble.

Learn more about density:

https://brainly.com/question/952755

#SPJ1

Missing part of question:

See attached photo

More molecules in a fixed volume means more pressure.

According to the context, the term may or may not include ions that meet this requirement. A molecule is a collection of two or more atoms held together by attractive forces known as chemical bonds.

Hence, it can be seen that an increase in the number of gas molecules, while container volume stays constant, increases pressure.

A decrease in container volume increases gas pressure. An increase in the temperature of a gas in a rigid container increases the pressure

Read more about molecules here:

https://brainly.com/question/26044300

#SPJ1

The cost of 1 pound flask of mercury is $1.86. One of the most commonly used units for determining the mass or substance of an item or a body is the pound.

You really must understand what pounds signify when referring to weight. One of the most commonly used units for determining the mass or substance of an item or a body is the pound.

Scales are used in several ways to determine a body's weight or mass. To measure various items of various sizes, many sorts of scales are utilized. As the measure of an object's weight, pounds are used. In Britain, this style of measuring in pounds is typical.

cost of  76.00 pound flask of mercury =$142.00

cost of 1 pound flask of mercury=$142.00/  76.00 =$1.86

Therefore, the cost of 1 pound flask of mercury is $1.86.

To learn more about pound, here:

https://brainly.com/question/29181271

#SPJ1