Some one plz help me I am so confused

The frontage measure is 45 feet.

The British imperial and American customary systems of measurement both use the feet (standard symbol: ft) as a unit of length. One foot has exactly 0.3048 meters since the International Yard and Pound Agreement of 1959. One yard equals three feet in both customary and imperial measurements. One foot equals 12 inches.

Throughout history, numerous regional systems of units, including the Greek, Roman, Chinese, French, and English systems, included the concept of "feet." Its length varied from one nation to another, from one city to another, and occasionally from one trade to another. Its length was often divided into 12 inches or 16 digits, however this was not always the case. Its typical length was between 250 mm and 335 mm.

A lot contains 750 square yards and has a length of 150 feet, what does the frontage measure?

Learn more about feet here:

https://brainly.com/question/14582235

#SPJ1

The velocity of the wood board which is resting on very smooth ice in the middle of a frozen lake relative to this ice is 0.905 m/s

It states the amount of momentum remains constant

Momentum of a moving body is the product of mass times velocity.

Formula for momentum:

When the two objects collides, then the initial collision of the two body is equal to the final collision of two bodies by the law of conservation of momentum.

here,

mass of wood, m=58.5 kg

mass of boy, M=41.7 kg

velocity of the boy V=1.27 m/s

Thus,

The conservation of momentum,

m*v = M*V

substituting the value,

(58.5*v) = 1.27* 41.7

v = 52.95 / 58.5

v = 0.905 m/s

Thus, the velocity of the wood board which is resting on very smooth ice in the middle of a frozen lake relative to this ice is 0.905 m/s.

Learn more about the conservation of momentum here;

https://brainly.com/question/3920210

#SPJ4

The film sensor and the long axis of the tooth must be aligned perpendicular to the central ray of the x-ray beam when using the paralleling approach.

To find the answer, we need to know above the paralleling technique in the dental x-ray.

Thus, we can conclude that, the film sensor and the long axis of the tooth must be aligned perpendicular to the central ray of the x-ray beam when using the paralleling approach.

Learn more about dental paralleling technique here:

https://brainly.com/question/26187420

#SPJ1

As the number of protons in an atom’s nucleus increases, the number of electrons must increase to maintain the atom’s overall neutral charge; option B.

Atomic number is the number of protons present in the nucleus of an atom.

The atomic number of atoms of elements increase with increase in atomic number.

In conclusion, atomic number increases the size down a group and decreases atomic size across a period.

Learn more about atomic number at: https://brainly.com/question/621740

#SPJ1

According to the research, solar energy is a renewable energy used in generating electricity and obtaining thermal energy.

It is a type of energy derived from natural sources known as renewable energy that is obtained from solar radiation that reaches the Earth in the form of light, heat or ultraviolet rays.

Solar energy can be used to generate electricity, hot water supply and home heating.

Therefore, we can conclude that according to the research, solar energy is a renewable energy used in generating electricity and obtaining thermal energy.

Learn more about solar energy here: https://brainly.com/question/9704099

#SPJ1

The change in internal energy is 10 J.

Given,

Cross-sectional area, A = 0.10 m²

Pressure of gas, P = 8000 N/m²

Displacement, s = 4 cm = 0.04 m

Heat transferred, H = 42 J

To find,

Change in internal energy =?

We know that, as per Law of thermodynamics,

Change in internal energy = Heat - Work

Force = pressure × area

          = 8000 × 0.10

          = 800 N

Work = Force × Displacement

         = 800 × 0.04

         = 32 J

Change in internal energy = Heat - Work

                                            = 42 - 32

                                            = 10 J

Hence, the change in internal energy is 10 J.

Learn more about law of thermodynamics here:

https://brainly.com/question/3808473

#SPJ4

Thermal energy from the room-temperature water will continuously flow to the boiling water.

Learn more about first law of thermodynamics brainly.com/question/3808473

#SPJ4

The total work done on the car is 784Joule.

V= vinal velocity= 20m/s

t= time = 10s

a= acceleration

=> a= 20/10= 2m/s²

V²-U² = 2aS

=> 400= 4S

=> S= 400/4= 100m

Work done by frictional force= frictional force × distance

= (0.2×4×9.8)×100

= 784Joule

Thus, we can conclude that the work done on the car is 784Joule.

Learn more about the work done here:

brainly.com/question/25573309

#SPJ1

The quantum theory opines that electron in atoms occur a discreet energy levels.

The quantum theory was initiated by the idea of Max plank. In this idea, energy was viewed as occurring in discrete amounts. This idea was first applied to the phenomenon of the black body radiation hence the Plank Equation; E = hf.

Now Neils Bohr pushed the idea further by putting forward the opinion that when an electron in atom is found in an orbit, it does not radiate energy. The atom was thus visualized as being composed of several energy levels and radiation can only occur when an electron moves from a higher to lower energy level.

This implies that the energy of each electron in an atom is quantized. Thus implies that it has a value which an integral multiple of a fundamental amount.

Learn ore about energy quantization:https://brainly.com/question/515006?

#SPJ1

Answer:

1. iodine

2. convection

3. radiation

4. conduction

5. gases

6. expansion

7. freezing point

8. absorber

9. thermos flask

10. mercury

Wave power involves  conversion of mechanical energy to electrical energy.

We know that energy conversion is part of the postulations of the first law of thermodynamics which states that energy can neither be created nor destroyed but can be transformed from one form to another.

Now, the wave power can convert the regular up and down movement of the ocean waves into a source of electricity. This implies that the energy that is taking place here is the conversion of mechanical energy to electrical energy.

Learn more about energy conversion:https://brainly.com/question/11234965

#SPJ1

There are different refractive errors that are common and some of them are:

This refers to the study of light phenomena that deflects when it passes through a medium in an oblique manner to another medium of a varying density.

Hence, we can see that there are everyday examples of refraction in simple terms which occurs and some of them are:

Hence, we can see that your question is incomplete, so I gave you a general overview to help you get a better understanding of the concept of refraction.

Read more about refraction here:

https://brainly.com/question/15838784

#SPJ1

Density of rock = 3.23 Kg/m^3

Given:

mass of Moon rock = 8.94 kg

apparent mass of Moon rock = 6.18 kg

To Find:

density of the rock

Solution: It is a universal fact that mass of an object remains constant whether measured on earth or on moon.

Mass of rock on moon/earth = 8.94 kg

When the block is immersed in water then;

Loss in weight = weight of water displaced

Loss in weight = 8.94 - 6.18 = 2.76 kg

As we know that water has a density of 1g/cm^3 (1000kg/m^3)

Volume of water = volume of the rock = Mass/density = 2.76 kg

density of rock mass/volume = 8.94/2.76 = 3.23 Kg/m^3

Density of rock = 3.23 Kg/m^3

Learn more about Density here:

https://brainly.com/question/1354972

#SPJ4

The force of gravity between Earth and Mars will decrease.

The gravitational law is given as-

           F = G mM/r²

  here,  m= mass of rocket

             M = mass of earth

             r = distance between earth and rocket

So, as rocket takes off from earth and fly towards mars then the distance starts to increase between earth and rocket, and the gravitational pull between them starts to weaken. Then a point will reach when rocket will far from gravity of earth and could probably enter the gravity of Mars.

Learn more about gravitational law here:

 https://brainly.com/question/12101547

     #SPJ4

Answer:6m/s

Explanation:as you can see before twenty seconds there was no change in speed,but between twenty to thirty seconds,the speed changed from 0m/s to 6m/s,so change in speed is 6m/s.

The speed of an object between 20 and 30 seconds shown in the graph is 70 m/s.

Given:

Time, ΔT = 30-20 = 10s

Acceleration, a = 7 m/s²

The speed can be computed from the acceleration and time. The standard unit of velocity is meters per second.

For the given case, the speed can be computed from the acceleration and time given in the graph.

The speed is given as:

a =  v/t

v = at

v = 7×10

v = 70 m/s

Hence, the speed of an object between 20 and 30 seconds shown in the graph is 70 m/s.

To learn more about Speed, here:

https://brainly.com/question/28224010

#SPJ3

False, A patient who is lactose intolerant will not  have a normal glucose curve after ingesting a dose of lactose.

What is lactose intolerant ?

Types of lactose intolerance -

The symptoms of lactose intolerance?

Symptoms of lactose intolerance include nausea, cramps, gas, bloating, or diarrhea within 30 minutes to 2 hours after consuming milk or dairy products.

Learn more about lactose intolerant

brainly.com/question/13061505

#SPJ4

The normal force acting on April as she stands on a flat surface is 705.6 N.

Normal force of the girl

Fₙ = mg

where;

Fₙ = 72 x 9.8

Fₙ = 705.6 N

Thus, the normal force acting on April as she stands on a flat surface is 705.6 N.

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

Which meteorological parameter is expressed as the ratio between the air’s actual water vapour content and the amount of water vapour required for saturation at that temperature: relative humidity.

Water vapour is the primary form of atmospheric moisture. Although its storage in the atmosphere is comparatively small, water vapour is extremely important in forming the moisture supply for dew, frost, fog, clouds, and precipitation.

Water vapour is also the most important greenhouse gas in the atmosphere. Water vapour can be produced from the evaporation or boiling of liquid water or from the sublimation of ice.

learn more about Water vapour here

https://brainly.com/question/6345787

#SPJ4

Answer:

5.0×10^-9

Explanation:

velocity = frequency × wavelength

3.0×10^8=f600×10^-9

divide both sides by 600×10^-9

f=3.0×10^8/600×10-9

f=5.0×10^-9

The wavelength of an electromagnetic wave is 600 nm. The frequency of the electromagnetic wave is 5.0 × 10^14 Hz.

To find the frequency of an electromagnetic wave, we can use the equation:

Frequency (f) = Speed of light (c) / Wavelength (λ)

where:

c = speed of light in a vacuum = 3.0 × 10^8 m/s

λ = wavelength of the electromagnetic wave in meters

First, we need to convert the given wavelength from nanometers (nm) to meters (m). Since 1 nm = 1 × 10^-9 m, the wavelength is:

λ = 600 nm × (1 × 10^-9 m/nm) = 600 × 10^-9 m = 6.0 × 10^-7 m

Now, we can calculate the frequency using the equation:

f = c / λ

f = 3.0 × 10^8 m/s / (6.0 × 10^-7 m)

f = 5 × 10^14 Hz

So, the frequency of the electromagnetic wave is 5 × 10^14 Hz (hertz).

This means that the wave oscillates or completes 5 × 10^14 cycles per second. Higher frequencies correspond to shorter wavelengths and vice versa. Electromagnetic waves with higher frequencies are more energetic, such as X-rays and gamma rays, while waves with lower frequencies, like radio waves, have longer wavelengths and are less energetic.

Try to know more about electromagnetic wave :

https://brainly.com/question/29774932

#SPJ2

The apparent weight of a 1.1 g drop of water is 4.24084 N.

Solution:

N = Speed of rotation = 1250 rpm

D = Diameter = 45 cm

r = Radius = 22.5 cm

M = Mass of drop = 1.1 g

Angular speed of the water = [tex]\omega = \frac{2\pi N}{60}[/tex]

[tex]\omega = \frac{2\pi \times 1250}{60}[/tex]

[tex]\omega = 130.89 rad/s[/tex]

Apparent weight is given by

[tex]W _a = M\omega^{2}R[/tex]

[tex]W_a = 1.1 \times 10^-^3\times (130.89)^2\times 0.225[/tex]

[tex]W_a[/tex] = 4.24084 N

Know more about Apparent weight https://brainly.com/question/14323035

#SPJ4

Question:

The spin cycle of a clothes washer extracts the water in clothing by greatly increasing the water's apparent weight so that it is efficiently squeezed through the clothes and out the holes in the drum. In a top loader's spin cycle, the 45-cm-diameter drum spins at 1250 rpm around a vertical axis. What is the apparent weight of a 1.1 g drop of water?

This is a time dilation exercise. The time taken for the CD to last as measured by a clock on earth is given as: 67.08 minutes.

Under the theory of special relativity, time dilation is the "slowing down" of a clock as determined by an observer in relative motion with respect to that clock.

Recall that the equation for time dilation is given as:

t = t₀/√(1- (v²/c²)

Where:

t₀ is the observer in the space craft

t  is the observer on earth

v is the speed of the space craft which is given as 2 x 10⁸m/sec

c is the speed of light which is given as 3 x 10⁸m/sec

Hence

v/c = 2 x 10⁸/ 3 x 10⁸

= 2/3

Thus,

t = 5/√(1-(4/9)

= 50 √(9/5)

= 150/√5

= 150 /2.2361

= 67.08 min

Learn more about time dilation at;
https://brainly.com/question/3747871
#SPJ1

When making segmented bends, the bend radius is the distance from the center point of the circle or object to the centerline of conduit.

Segment bending is a technique for bending conduit in which numerous tiny bends are combined to form a single, bigger bend.  Measure from the elbow's center at the bend's CenterPoint to the intersection of the "degrees of bend" lines to determine your centerline radius (see image above). In fact, the CLR may be determined by obtaining this measurement from any point on the elbow. The distance between segments is calculated by dividing the developed length by the number of shots. When making segmented bends, the bend radius is the distance from the center point of the circle or object to the centerline of conduit. To calculate the degrees per shot, divide 90 degrees by the quantity of shots. Regardless of how many lanes a road or highway has, centerline miles are used to quantify their length. Centerline of conduit miles between the two sides of a divided highway might differ slightly due to divergences and curves. Compared to lane miles, centerline miles provide a more understandable indication of a road's overall length.

Learn more about conduit here:

https://brainly.com/question/26254401

#SPJ4

C. The work done by the 5500.0 N force on the elevator is 275,000 J.

The work done by the 5500.0 N force on the elevator is calculated as follows;

W = Fd

where;

W = 5500 x 50

W = 275,000 J

Thus, the work done by the 5500.0 N force on the elevator is 275,000 J.

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Excess Carbon Monoxide(CO) attributed to increases in the planet's temperature over the past few decades

While carbon monoxide (CO) poisoning is the world's most common cause of poisoning death, correlations between CO poisoning and weather are yet unknown.

The incidence risk of acute CO poisoning is influenced by temperature changes, however, the effects vary in Taiwan depending on the season and the person. Our research quantifies the effects of environmental variables and offers essential support for healthcare professionals to create preventive measures to lower the incidence of acute CO poisoning.

An earlier study conducted in Beijing found a negative correlation between temperature and the frequency of acute Carbon Monoxide poisoning. While the impact of other significant weather variables (such as relative humidity and wind speed) on this issue is still unknown, prior research has mostly focused on the relationship between temperature variations and CO poisoning.

To learn more about Carbon Monoxide please visit-
https://brainly.com/question/11313918
#SPJ1

Answer:

A, conduction.

Explanation:

Thermal conduction, by definition, is "a phenomenon  that occurs through the interaction of neighboring atoms and molecules, transferring their energy/heat (partially) to their neighbors". Fiberglass insulation works mainly by preventing thermal conduction, as would a rubber handle of a pot on a hot stove.

Hope this helps!

The work done on the box is 350 Joule.

Work is done on an object when the displacement of the object is not perpendicular to the direction of the applied force. The unit of Work is Joule (J)

Given that 70N force pulls a box straight up 5 m above the ground.

Work is the product of force F and the distance S. That is,

W = F x S

Where

Substitute the two parameters into the formula above

W = 70 x 5

W = 350 J

Therefore, the work done on the box is 350 Joule.

Learn more about Work here: https://brainly.com/question/25573309

#SPJ1

answer

so unit of velocity is m/s

displacement=600m

5minutes should be converted to seconds

5×60=300 seconds

so,

velocity= displacement÷time

= 600m ÷300s

=2m/s or 2ms^-1

Answer:

2 m/s

Explanation:

we have given

distance traveled by body =600m

time taken = 5*60 =300 sec( si unit of time is second)

velocity =?

we know that

velocity =distance traveled/ time taken

=600/300

= 2 m/s