some one help please ​

MOUNTAINS

Mountains are large, tall, and elevated land areas on the earth's surface. They have steep, sloping sides and sharp or rounded ridges, and a high point, called a peak.

PLAINS

Plains are one of the major landforms on earth. They are areas of flat lands.

PLATEAUS

A plateau is a flat, elevated landform that rises above the surrounding area.

DESERTS

Regions of dry, arid lands.

DELTAS

A river delta is a landform created by deposition of sediment that is carried by a river as the flow leaves its mouth and enters slower-moving or stagnant water.

Answer:

25 PRECENT

Explanation:

Answer: b and d

Explanation:

1×10^-3=1×1/10³=1×1/1000=1/1000 so b is correct

1×10^-3=1/1000=0.001

so d is correct

Answer:

The answer is A

Explanation:

hope it helps

Answer:

39.02 amu

Explanation:

The average atomic mass of an element can be calculated as follows :

[tex]X=\dfrac{9.67\times 38+78.68\times 39+11.34\times 40+0.31\times 41}{100}\\\\X=\dfrac{3902.29}{100}\\\\X=39.02\ amu[/tex]

So, the atomic mass of the element X is 39.02 amu.

Answer:

La electrólisis es un proceso físico por el que se descompone una sustancia en disolución a través de la corriente eléctrica. Para que la electrólisis sea posible es necesaria una fuente de alimentación continua, una disolución iónica y dos polos (ánodo y cátodo), que atraen hacia sí los iones de signo opuesto.

Answer:

bakit Kay's lahat Ng module mahirap

9. melting point

10. balloons float because they are filled with hydrogen, a gas which is less dense than air.

11. specific gravity

12. element

13. mixture

14. sodium and chlorine

15. cutting of paper

16. condensation

17. 1 and 3

18. heat energy is released

Answer:

Explanation:

Una manifestación, protesta o marcha es la exhibición pública de la opinión de un grupo activista (económica, política o social), mediante una congregación en las calles, a menudo en un lugar o una fecha simbólicos y asociados con esa opinión.

Answer:

C:Radiation

Explanation:

Pluto

Answer:

i hope this help

Explanation:

Radiation is a method of heat transfer that does not rely upon any contact between the heat source and the heated object as is the case with conduction and convection. Heat can be transmitted through empty space by thermal radiation often called infrared radiation. This is a type electromagnetic radiation.

Answer: Among the listed substances [tex]XeCl_{4}[/tex] is the molecular compound.

Explanation:

A chemical compound formed by the chemical combination of two or more non-metals is called a molecular compound or covalent compound.

For example, Xe and Cl are non-metals. The compound formed by them is [tex]XeCl_{4}[/tex] which is a molecular compound.

A molecular compound is formed by sharing of atoms between the combining atoms.

Whereas NaF, [tex]MnCl_{2}[/tex] and CaO are all ionic compounds as they are formed by chemical combination of a metal and a non-metal.

Thus, we can conclude that among the listed substances [tex]XeCl_{4}[/tex] is the molecular compound.

i know the answer is a theory

Viruses are known as obligatory parasites as they only become active and multiply when inside a host. Viruses are inactive when they are outside.

Answer:

i think is probably A

Explanation:

because at constant temperature, the product of the pressure and volume of a given mass of and ideal gass in a closed system is always constant

Answer:

I believe the answer is A or D

Explanation:

I hope this helps you out!

Answer:

B. O2 is reduced when it accepts electrons and forms water.

Explanation:

During cellular respiration water is formed when oxygen receives electrons and picks up protons at the conclusion of the electron transport chain. The electron transport chain will stop functioning if there isn't enough oxygen to receive electrons (for example, because a person isn't breathing in enough oxygen), and ATP will no longer be created by chemiosmosis. Cells can't carry out the reactions they need to function if they don't even have enough ATP, and they may perish after a long period of time.

Answer:

For 1: 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules

For 2: The given amount of nitrogen dioxide molecules has a mass of 41.31 g.

Explanation:

According to the mole concept:

1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

We are given:

Mass of nitrogen dioxide = 6.68 g

Molar mass of nitrogen dioxide = 46 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of nitrogen dioxide}=\frac{6.68g}{46g/mol}=0.145mol[/tex]

Using above concept:

If 1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules

So, 0.145 moles of nitrogen dioxide will contain = [tex](0.145\times 6.022\times 10^{23})=8.73\times 10^{22}[/tex] number of molecules

Hence, 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules

We are given:

Molecules of nitrogen dioxide = [tex]5.41\times 10^{22}[/tex] molecules

Using the above concept:

If [tex]6.022\times 10^{23}[/tex] number of molecules are present in 1 mole of a compound

So, [tex]5.41\times 10^{22}[/tex] number of molecules will be present in = [tex]\frac{1mol}{6.022\times 10^{23}}\times 5.41\times 10^{22}=0.898[/tex] moles of nitrogen dioxide

We know, molar mass of nitrogen dioxide = 46 g/mol

Using equation 1:

[tex]0.898mol=\frac{\text{Mass of nitrogen dioxide}}{46g/mol}\\\\\text{Mass of nitrogen dioxide}=0.898mol\times 46g/mol=41.31g[/tex]

Hence, the given amount of nitrogen dioxide molecules has a mass of 41.31 g.

Answer:

See explanation

Explanation:

In Bohr's theory, electrons are found in specific regions in space called orbits. These orbits are also called energy levels. An electron may move from one energy level to another by absorbing or emitting energy.

In the wave mechanical model, electrons are not found in a particular region in space according to Heisenberg's uncertainty principle.

We rather define a certain region in space where there is a high probability of locating the electron. This region in space where there is a high probability of locating the electron is called an orbital.

Hence, in the Bohr's model of the atom,electrons can surely be found in orbits while in the wave mechanical model, the orbital is a probability function that describes a region in space where an electron may be found.

Answer:

Calculate the volume (in L) occupied by 3.40 g of NH3 at STP. (STP: 0 degree Celsius and 1 atmosphere of pressure).

Explanation:

To get the volume of ammonia gas at STP, calculate the number of moles of [tex]NH_3[/tex] in the given amount.

Number of moles of [tex]NH_3[/tex] gas is:

[tex]number of moles of NH_3 gas&=\frac{given mass of the gas}{its molecular mass} \\ &=\frac{3.40g}{17.0g/mol} \\&=0.2 mol.[/tex]

Since,

1 mol of any gas at STP occupies ------- 22.4 L of volume.

then,

0.2 mol of [tex]NH_3[/tex] occupies how much volume?

[tex]=>0.2 mol x \frac{22.4 L}{ 1.0 mol} \\=4.48 L[/tex]

Hence, the volume occupied by 3.40 g of ammonia at STP is --- 4.48 L.

(1) Seven electrons

1s² 2s²2p³

There are two electrons in the 2s subshell and three in the 2p subshell. The remaining two electrons are in the inner 1s subshell.

(2) 22 electrons

1s² 2s²2p⁶ 3s²3p⁶ 4s²3d²

There are two electrons in the 4s subshell and two in the 2p subshell. The remaining 18 electrons are in the inner subshells.

(3) 17 electrons

1s² 2s²2p⁶ 3s²3p⁵

There are two electrons in the 3s subshell and five in the 2p subshell. The remaining 10 electrons are in the inner subshells.

(4) n = 4, l = 2

(5) N=2 I=0 MI=0

(6) There can be two electrons in one orbital maximum. The s sublevel has just one orbital, so can contain 2 electrons max. The p sublevel has 3 orbitals, so can contain 6 electrons max. The d sublevel has 5 orbitals, so can contain 10 electrons max.

(7) n = 4 can hold up to 16 electrons

There are 4 sublevels; 42, 4p, 4d and 4f

4s (1 orbital), 4p (3 orbitals)

4d (5 orbitals), 4f (7 orbitals)

Maximum number of electrons in energy level: 16

s = 1 orbital

p = 3 orbitals

d = 5 orbitals

f = 7 orbitals

Add these up;

1 + 3 + 5 + 7 = 16

(8) 14 electrons If l = 3, the electrons are in an f subshell. The number of orbitals with a quantum number l is 2l + 1, so there are 2×3 + 1 = 7 f orbitals. Each orbital can hold two electrons, so the f subshell can hold 14 electrons.

sorry i didn't do the last two.. also sorry if some or none of these are correct, i tried my best

Answer:

The combination of ions most likely to produce a precipitate is a group of answer choices:

lead nitrate soluble in water

Mg2+ and C2H3O2-.

Fe3+ and OH-.

Li+ and PO43-.

Pb2+ and NO3-.

NH4+ and SO42-.

Explanation:

Among the given options,

magnesium acetate, lithium phosphate, lead nitrate, ammonium sulfate are soluble in water.

The only one which is insoluble in water is [tex]Fe^3+[/tex] and [tex]OH^-[/tex] combination.

[tex]Fe(OH)_3[/tex] is insoluble in water. It forms a precipitate.

Answer:

Final pressure, P2 = 1088.89 atm

Explanation:

Given the following data;

To find the final pressure (P2), we would use the combined gas law.

Mathematically, the combined gas law is given by the formula;

[tex] \frac {PV}{T} = k [/tex]

[tex] \frac {P_{1}V_{1}}{T_{1}} = \frac {P_{2}V_{2}}{T_{2}} [/tex]

Substituting into the formula, we have;

[tex] \frac {1.19*715}{30} = \frac {P_{2}*1.12}{43} [/tex]

[tex] \frac {850.85}{30} = \frac {P_{2}*1.12}{43} [/tex]

[tex] 28.3617 = \frac {P_{2}*1.12}{43} [/tex]

Cross-multiplying, we have;

[tex] 28.3617 * 43 = 1.12P_{2} [/tex]

[tex] 1219.5531 = 1.12P_{2} [/tex]

[tex] P_{2} = \frac {1219.5531}{1.12} [/tex]

Final pressure, P2 = 1088.89 atm

[tex]\huge\fcolorbox{red}{pink}{Answer ♥}[/tex]

Life on Earth is based on carbon, likely because each carbon atom can form bonds with up to four other atoms simultaneously. This quality makes carbon well-suited to form the long chains of molecules that serve as the basis for life as we know it, such as proteins and DNA.

Hope it helps uh ✌️✌️✌️

Answer:

In the esterification reaction, an OH from the molecule acid and H from the alcohol form a molecule of water.

Ethanol and butanoic acid forms ethyl butanoate

Answer:

The percentage efficiency of the electrical element is approximately 82.186%

Explanation:

The given parameters are;

The thermal energy provided by the stove element, [tex]H_{supplied}[/tex] = 3.34 × 10³ J

The amount thermal energy gained by the kettle, [tex]H_{absorbed}[/tex]  = 5.95 × 10² J

The percentage efficiency of the electrical element in heating the kettle of water, η%, is given as follows;

[tex]\eta \% = \dfrac{H_{supplied} - H_{absorbed} }{H_{supplied}} \times 100[/tex]

Therefore, we get;

[tex]\eta \% = \dfrac{3.34 \times 10^3 - 5.95 \times 10^2}{3.34 \times 10^3} \times 100 = \dfrac{549}{668} \times 100 \approx 82.186 \%[/tex]

The percentage efficiency of the electrical element, η% ≈ 82.186%.

Answer:

b

Explanation:

Molecular formula of Decanoic Acid is  C₁₀H₂₀O₂ therefore Option A is the right answer.

Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .

In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .

In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.

Hence option A is the right answer.

To know more about Decanoic Acid;

https://brainly.com/question/8729762

#SPJ2

Answer: when gas is heated ,they gain more kinetic energy causing them to move faster.

Explanation: so as they gain kinetic energy they hit the walls of the container with more force thus causing pressure to increase

HOPE THIS HELPSS comment if u need more explanation

Answer: Covalent bonding is when atoms of different elements  share electrons

Explanation: Taking Methane CH₄

There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.

Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.

Carbon has an electrical configuration of 2,4. Hydrogen only has one electron in its valence shell, whereas carbon contains four electrons. In order to create methane, carbon forms a covalent connection with four hydrogen atoms, sharing its four electrons with them.

Therefore, sharing of electron is the only basis for the formation of covalent bond in methane.

To learn more about chemical compound, here:

brainly.com/question/26487468

#SPJ2

Answer:

B

Explanation:

. 2Ca(OH)2(aq) + Na2CO3(aq) 2CaCO3(s) + 2NaOH(aq)

A. Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + 2NaOH(aq)