Sodium trinitride decomposes to sodium and nitrogen. What is the mass of nitrogen gas if you started with 48. 4 L of sodium trinitride at STP?

Answer:

738

Explanation:

P x 20.4 = .833 x 290 x 62.36(R value for mmHg)

P = 738 mmHg

There is one lone pair, the molecular geometry is bent. So, the option is (B) 1 lone pair, bent.

The Lewis structure of [tex]ClO_3[/tex]- ion has one central chlorine atom bonded to three oxygen atoms. The total number of valence electrons in the [tex]ClO_3-[/tex] ion is 26, which includes 7 valence electrons of chlorine (Group 7A) and 3 x 6 valence electrons of oxygen (Group 6A).

To determine the number of lone pairs and the geometry of the ion, we need to follow the following steps:

Draw the Lewis structure of the ion

Count the number of electron groups around the central atom

Determine the electron group geometry

Determine the molecular geometry by considering lone pairs on the central atom.

Here's the Lewis structure of [tex]ClO_3-[/tex]:

               O

               ║

         O — Cl — O

               ║

               O

The central chlorine atom is bonded to three oxygen atoms, and there is a single bond between each chlorine-oxygen pair.

The number of electron groups around the central chlorine atom is 4: three single bonds and one lone pair.

The electron group geometry is tetrahedral.

The molecular geometry is determined by considering the number of lone pairs on the central atom. Since there is one lone pair, the molecular geometry is bent.

Therefore, the answer is (B) 1 lone pair, bent.

For more such questions on lone pair , Visit:

https://brainly.com/question/3915115

#SPJ11

Increasing [Ag+] should be done in the following order: Solution X, Solution Y, and Solution Z. saturated solution.

What is saturated solution?

A saturated solution is one in which, at a specific temperature and pressure, the maximum amount of solute has been dissolved. In other words, under those circumstances, no additional solute can be dissolved in the solvent.

.We must evaluate the solubility of silver compounds in each saturated solution in order to establish the sequence of increasing [Ag+] (silver ion concentration) for the solutions X, Y, and Z.

AgCl, followed by AgBr and AgI, has the lowest solubility product constant (Ksp) value, as can be seen from the table. The solubility of the molecule and the concentration of the corresponding ions in the solution decrease with decreasing Ksp values.

Based on this knowledge, we can arrange the answers in the following sequence, increasing [Ag+]:

Solution Z: AgI will produce the highest [Ag+] concentration since it is the most soluble of the three silver compounds.

Solution Y: Because AgBr is less soluble than AgI, Solution Y will have a lower [Ag+] concentration than Solution Z but a greater concentration than Solution X.

The lowest [Ag+] concentration among the solutions may be found in Solution X, which contains AgCl, which is the least soluble of the three silver compounds.

Therefore, increasing [Ag+] should be done in the following order: Solution X, Solution Y, and Solution Z.

To learn more about  saturated solution. from the given link .

https://brainly.com/question/1851822

#SPJ4

The reagents that can be used to convert acetic anhydride into 3-methyl-3-pentanol are Grignard reagent and acidic work-up

First, react acetic anhydride with a Grignard reagent, which is an organomagnesium compound typically represented as RMgX (R is an organic group, and X is a halogen). In this case, use 3-methyl-2-bromopentane (CH³CH²CH(CH³)CH²Br) as the Grignard reagent precursor. Begin by preparing the Grignard reagent from 3-methyl-2-bromopentane by reacting it with magnesium metal in an anhydrous ether solvent such as diethyl ether. The Grignard reagent formed is CH³CH²CH(CH³)CH²MgBr. Next, add acetic anhydride to the Grignard reagent solution, which will undergo a nucleophilic addition reaction, the carbonyl group in acetic anhydride is attacked by the nucleophilic carbon of the Grignard reagent, resulting in a magnesium salt of the desired alcohol.

Lastly, to convert the magnesium salt into the target alcohol, 3-methyl-3-pentanol, perform an acidic work-up using an aqueous acid such as dilute hydrochloric acid (HCl) or sulfuric acid (H²SO⁴). The acidic work-up will protonate the alkoxide group, forming the desired alcohol and a magnesium salt byproduct. Following these steps, you can successfully convert acetic anhydride into 3-methyl-3-pentanol using reagents such as Grignard reagents and acidic work-up.

Learn more about Grignard reagent here:

https://brainly.com/question/30144052

#SPJ11

The pH of the solution is approximately 0.582.

To determine the pH of the solution, we need to calculate the concentration of HBr in the diluted solution and then convert it to pH using the appropriate formula.

Given: Initial volume of solution (V1) = 175 mL = 0.175 L, Initial concentration of HBr (C1) = 1.50 M, Final volume of solution (V2) = 1.00 L

Using the dilution formula, we can find the final concentration (C2) of HBr: C1V1 = C2V2

1.50 M x 0.175 L = C2 x 1.00 L

C2 = (1.50 M x 0.175 L) / 1.00 L

C2 = 0.2625 M

Now that we have the final concentration of HBr, we can calculate the pH using the formula: pH = -log[H+]

Since HBr is a strong acid, it dissociates completely in water, and the concentration of H+ ions is equal to the concentration of HBr. Therefore, pH = -log(0.2625).

Calculating this value: pH ≈ -log(0.2625) ≈ 0.582

Rounding to three decimal places, the pH of the solution is approximately 0.582.

Know more about diluted solution here

https://brainly.com/question/15467084#

#SPJ11

The correct answer is Glycolysis, Citric Acid Cycle, and Fatty Acid B-Oxidation.

The pathways that generate reduced cofactors (NADH or FADH2) for the Electron Transport Chain (ETC) to use are glycolysis, the citric acid cycle, and fatty acid β-oxidation. During glycolysis, glucose is broken down into pyruvate, generating two molecules of NADH. In the citric acid cycle, acetyl-CoA is oxidized to CO2, generating three molecules of NADH and one molecule of FADH2 per cycle.

Finally, during fatty acid β-oxidation, fatty acids are broken down into acetyl-CoA, generating multiple molecules of NADH and FADH2. These reduced cofactors are then used by the ETC to generate ATP through oxidative phosphorylation. Therefore, options 1, 4, and 5 are correct answers.

To know more about Electron Transport Chain (ETC) visit:

https://brainly.com/question/24372542

#SPJ11

According to law of conservation of mass, the value of x is 1.329 grams.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

Mass of hydrated compound= mass of anhydrous compound +mass of water(x), thus mass of x= 3.592-2.263=1.329 grams.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ1

the empirical formula of the substance is Fe₂O₃, indicating that the substance consists of two iron atoms bonded to three oxygen atoms.To determine the empirical formula of the substance, we need to find the ratio of the elements present in the sample.

Given that 78.85 g of Iron and 33.88 g of Oxygen were recovered, we need to convert these masses into moles. The molar mass of Iron (Fe) is 55.85 g/mol, and for Oxygen (O), it is 16.00 g/mol.

The number of moles of Iron can be calculated as 78.85 g / 55.85 g/mol ≈ 1.41 mol.
The number of moles of Oxygen can be calculated as 33.88 g / 16.00 g/mol ≈ 2.12 mol.

Next, we need to find the simplest whole-number ratio between Iron and Oxygen. Dividing both mole values by the smaller value (1.41 mol in this case) gives us approximatelyapproximately 1 mol of Iron to 1.50 mol of Oxygen.

However, to obtain whole numbers, we can multiply these values by 2, resulting in 2 moles of Iron to 3 moles of Oxygen.

Therefore, the empirical formula of the substance is Fe₂O₃, indicating that the substance consists of two iron atoms bonded to three oxygen atoms.

 To  learn  more  about atom click here:brainly.com/question/1566330

#SPJ11

The molar mass of 3 moles of iodine, 5 moles of gold, and 2.5 moles of potassium is 126.9 g/mol, 197.0 g/mol, and 39.1 g/mol, respectively.

The molar mass is the mass of one mole of a substance, expressed in grams per mole (g/mol).

To calculate the molar mass of iodine (I), gold (Au), and potassium (K), we need to look up their atomic masses on the Periodic Table of Elements.

The atomic mass of iodine is 126.9 g/mol, the atomic mass of gold is 197.0 g/mol, and the atomic mass of potassium is 39.1 g/mol.

Therefore, the molar mass of 3 moles of iodine is 3 x 126.9 g/mol = 380.7 g/mol, the molar mass of 5 moles of gold is 5 x 197.0 g/mol = 985.0 g/mol, and the molar mass of 2.5 moles of potassium is 2.5 x 39.1 g/mol = 97.8 g/mol.

It is important to remember that the molar mass of a compound can also be calculated by adding up the molar masses of its constituent elements in the correct ratio.

Learn more about atomic mass here.

https://brainly.com/questions/29117302

#SPJ11

The air in the container is approximately 214°C after being compressed by Bigfoot.

To determine the temperature of the air in the container after it is compressed, we can use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin.

Given:

Initial volume (V1) = 2.40 L

Final volume (V2) = 0.500 L

Initial pressure (P1) = 1 atm (STP)

Final pressure (P2) = 8.00 atm

First, we need to find the number of moles of gas using the ideal gas law at STP:

P1V1 = nRT

(1 atm)(2.40 L) = n(0.0821 L·atm/mol·K)(273 K)

n = 0.100 mol

Now, we can use the relationship between pressure, volume, and temperature to find the final temperature:

P2V2 = nRT2

(8.00 atm)(0.500 L) = (0.100 mol)(0.0821 L·atm/mol·K)T2

4.00 L·atm = 0.00821 T2

Solving for T2:

T2 = 4.00 L·atm / 0.00821

T2 ≈ 487 K

Converting the temperature to Celsius:

T2 (in Celsius) = T2 (in Kelvin) - 273

T2 ≈ 487 K - 273

T2 ≈ 214°C

For more such questions on compressed visit:

https://brainly.com/question/27096986

#SPJ8

The pH of the solution after adding 250 mL of 0.1 M HCl to 250 mL of 0.2 M NH3 is approximately -5.0. Note that this is not a physically meaningful value for pH, as pH values must be between 0 and 14.

To solve this problem, we need to first write the balanced chemical equation for the reaction between HCl and NH₃:

HCl + NH₃ -> NH⁴⁺ + Cl⁻

This equation shows that HCl is a strong acid and will completely dissociate in water, while NH3 is a weak base and will only partially dissociate to form NH⁴⁺ and OH⁻.

Next, we need to calculate the concentrations of the relevant species in the solution.

For HCl, we have:

moles of HCl = volume x molarity = 0.25 L x 0.1 mol/L = 0.025 mol

[HCl] = moles / volume = 0.025 mol / 0.5 L = 0.05 M

For NH3, we have:

moles of NH3 = volume x molarity = 0.25 L x 0.2 mol/L = 0.05 mol

[NH3] = moles / volume = 0.05 mol / 0.5 L = 0.1 M

Using the Henderson-Hasselbalch equation, we can calculate the pH of the solution:

pH = pKa + log([A⁻]/[HA])

where pKa is the dissociation constant of NH3 (pKa = 9.0), [A-] is the concentration of the NH₃ conjugate base (NH2-), and [HA] is the concentration of the NH₃ weak base.

We can first calculate the concentration of the NH2- ion:

[NH²⁻] = [OH⁻] = Kw / [NH⁴⁺]

[NH2-] = 1.0 x 10⁻¹⁴ / 0.1 M = 1.0 x 10⁻¹³ M

Next, we can use the fact that NH₃ and NH²⁻ form a buffer system to calculate the concentrations of NH₃ and NH⁴⁺:

pH = pKa + log([A-]/[HA])

pH = 9.0 + log(1.0 x 10^-13 M / 0.1 M)

pH = 9.0 + log(1.0 x 10^-14)

pH = 9.0 - 14

pH = -5.0

Learn more about chemical reaction: https://brainly.com/question/30087623

#SPJ11

Boyle's Law, Charles' Law, and Avogadro's Law all follow from the principles of the Kinetic Molecular Theory, which describes the behavior of gases based on the motion of their particles.

Boyle's Law states that at a constant temperature, the volume of a gas is inversely proportional to its pressure. According to the Kinetic Molecular Theory, this can be explained by the fact that gas particles are in constant motion and exert pressure on the container walls. When the volume is decreased, the particles collide more frequently with the walls, resulting in an increase in pressure. Similarly, when the volume is increased, the particles collide less frequently, leading to a decrease in pressure. Charles' Law states that at a constant pressure, the volume of a gas is directly proportional to its temperature. According to the Kinetic Molecular Theory, this can be explained by the fact that as the temperature increases, the average kinetic energy of the gas particles also increases. This results in more vigorous motion and increased collisions with the container walls, leading to an expansion of the volume. Conversely, when the temperature decreases, the particles' kinetic energy decreases, leading to a decrease in volume. Avogadro's Law states that equal volumes of gases, at the same temperature and pressure, contain an equal number of particles (molecules or atoms). This law can be explained by the Kinetic Molecular Theory, which assumes that gases consist of particles in constant motion. If the temperature and pressure are the same, then the number of particles colliding with the walls of the container and exerting pressure will be the same for equal volumes of gases.

Learn more about Boyles law here:

https://brainly.com/question/30367133

#SPJ11

When bromine reacts with phenol, it forms a compound called 2,4,6-tribromophenol. This reaction is often used as a test for the presence of phenols in a sample.

The orange color of the bromine solution is due to the presence of bromine molecules, which are reduced to bromide ions during the reaction. The 2,4,6-tribromophenol that is formed is a white precipitate, which means that the correct answer to your question is a) white precipitate. This reaction can be used to differentiate between phenols and alcohols, as alcohols do not react with bromine in the same way.

When bromine reacts with phenol, it undergoes a substitution reaction, resulting in the formation of a white precipitate, which is 2,4,6-tribromophenol. The orange color of bromine is decolorized during this reaction. Therefore, the correct answer is a. white precipitate.

To know about bromine visit:

https://brainly.com/question/28938775

#SPJ11

The possible structure for the compound with formula C_5H_10O that gives two singlets in the ^1H NMR spectrum could be -OCH_2CH_3. The fact that the compound gives two singlets in the ^1H NMR spectrum suggests that it has two types of protons, which are not coupled to each other. This is indicative of the presence of an ether functional group (-O-) and an alkyl group (-CH_2-). Among the given substituent, only -OCH_2CH_3 contains an ether functional group and an alkyl chain of appropriate length to match the molecular formula C_5H_10O.

Moreover, -OCH_2CH_3 is known to be a meta-directing and deactivating group in electrophilic aromatic substitution reactions, which means that it would not direct incoming groups to the or tho and para positions. Instead, it would preferentially direct them to the meta position, if at all. Therefore, the given information about the substituent supports the possibility of the compound having -OCH_2CH_3 as a functional group. The structure that matches the given information is -OCH2CH3.

The given formula is C5H10O, which means the compound contains 5 carbon atoms, 10 hydrogen atoms, and 1 oxygen atom. Among the given structures, only -OCH2CH3 (ethyl ether) fits this formula. Since the ¹H NMR spectrum shows two singlets, this indicates that there are two distinct types of hydrogen atoms in the compound. In the structure of -OCH2CH3, there are two types of hydrogen atoms: the ones attached to the CH2 group and the ones attached to the CH3 group, which matches the provided information.

To know more about electrophilic visit

https://brainly.com/question/3118253

#SPJ11

There are 3.25 million units in 0.65 ml of interferon injection. It's important to note that this calculation is based on the assumption that the concentration of the interferon injection is consistent throughout the solution.

To calculate the number of units in 0.65 ml of interferon injection, we need to use a simple multiplication formula. We know that 1 ml of interferon injection contains 5 million units (u/ml), so to find the number of units in 0.65 ml, we need to multiply 5 million by 0.65.
5 million u/ml x 0.65 ml = 3.25 million units
Therefore, there are 3.25 million units in 0.65 ml of interferon injection. It's important to note that this calculation is based on the assumption that the concentration of the interferon injection is consistent throughout the solution. It's always best to double-check with a healthcare professional to ensure accurate dosing and administration of medication.

learn more about concentration

https://brainly.com/question/11850086

#SPJ11

Answer:

That is correct. Atomic fission is the process of splitting the nucleus of an atom into two or more smaller nuclei using a neutron. This process releases a large amount of energy in the form of heat and radiation. On the other hand, atomic fusion is the process of combining two or more atomic nuclei into a larger, more massive nucleus. This process also releases a large amount of energy. Both processes involve a conversion of mass into energy, according to Einstein's famous equation E=mc². This means that a small amount of matter can be converted into a large amount of energy. The reverse process, where energy is converted back into mass, is also possible and is observed in nature, for example in the formation of particles and antiparticles

The root-mean-square speed Vrms for diatomic oxygen at 500°C is approximately 1281 m/s. To find the Vrms of diatomic oxygen at 500°C, we need to use the formula:

Therefore, the root-mean-square speed Vrms for diatomic oxygen at 500°C is approximately 1281 m/s.
Main answer: The root-mean-square (Vrms) speed for diatomic oxygen at 500° C is approximately 711.8 m/s.To calculate the root-mean-square speed for diatomic oxygen at 500° C, we'll use the following steps: Determine the molar mass ratio of diatomic oxygen to diatomic hydrogen.

We know that the molar mass of diatomic oxygen is 16 times that of diatomic hydrogen. Determine the temperature ratio. Convert the temperatures from Celsius to Kelvin. 50°C = 50 + 273.15 = 323.15 K, and 500°C = 500 + 273.15 = 773.15 K. Calculate the temperature ratio as (773.15 K) / (323.15 K) = 2.391. Calculate the Vrms for diatomic oxygen using the ratio of molar masses and temperature. Vrms_oxygen = Vrms_hydrogen * sqrt(M_hydrogen / M_oxygen) * sqrt(T_oxygen / T_hydrogen)

To know more about oxygen visit:

https://brainly.com/question/13370320

#SPJ11

To calculate the number of moles from a given number of atoms, we need to use Avogadro's number, which represents the number of atoms in one mole of a substance. Avogadro's number is approximately 6.022 x 10^23 atoms/mol.

To determine the number of moles from 5.69 x 10^25 atoms of Mg, we divide the given number of atoms by Avogadro's number.

By dividing 5.69 x 10^25 atoms by 6.022 x 10^23 atoms/mol, we find that the number of moles of Mg is approximately 94.6 moles.

In summary, if you have 5.69 x 10^25 atoms of Mg, you would have approximately 94.6 moles of Mg. This calculation is based on Avogadro's number, which allows us to convert between the number of atoms and the number of moles in a given sample.

To learn more about Avogadro's number - brainly.com/question/28812626

#SPJ11

Answer: True

Explanation:

Approximately 8.42 mL of the 1.15 M nitric acid (aq) solution is required to react with 0.784 g of silver.

To determine the volume of 1.15 M nitric acid (aq) required to react with 0.784 g of silver, we need to use stoichiometry and the given balanced equation.

First, calculate the number of moles of silver (Ag) using its molar mass. The molar mass of silver is 107.87 g/mol.

Number of moles of Ag = Mass of Ag / Molar mass of Ag

= 0.784 g / 107.87 g/mol

≈ 0.00726 mol

From the balanced equation, we can see that the stoichiometric ratio between Ag and [tex]HNO_3[/tex] is 3:4. This means that 3 moles of Ag react with 4 moles of [tex]HNO_3[/tex].

Since the molar ratio is given, we can calculate the number of moles of [tex]HNO_3[/tex] required using the ratio:

Number of moles of [tex]HNO_3[/tex] = (Number of moles of Ag) x (4 moles [tex]HNO_3[/tex] / 3 moles Ag)

= 0.00726 mol x (4/3)

≈ 0.00968 mol

Finally, we can determine the volume of the 1.15 M [tex]HNO_3[/tex] (aq) solution using its molarity:

Volume of [tex]HNO_3[/tex] solution = Number of moles of [tex]HNO_3[/tex] / Molarity

= 0.00968 mol / 1.15 mol/L

≈ 0.00842 L or 8.42 mL

To learn more about nitric acid click here https://brainly.com/question/29769012

#SPJ11

Answer:

There are a total of 27 ways to arrange three quanta among three one-dimensional oscillators.

Explanation:

Each oscillator can have zero, one, two, or all three quanta, resulting in 4 possible arrangements per oscillator. Since there are three oscillators, the total number of arrangements is 4 x 4 x 4 = 27.

It is important to note that this question only refers to one-dimensional oscillators. If the oscillators were three-dimensional, the number of arrangements would be much larger as there would be multiple energy levels and modes of vibration to consider.

To know more about quanta, visit:

https://brainly.com/question/31972146

#SPJ11

A unit cell.

A unit cell is the smallest repeating unit of a crystal lattice that, when repeated in all directions, generates the entire crystal structure.

It retains the same geometric shape and symmetry as the larger crystal structure, which means that the properties of the crystal can be determined from the properties of its unit cell.

The unit cell contains one or more atoms or ions and is defined by its dimensions and angles between its sides. Understanding the unit cell is essential to understanding the physical and chemical properties of crystals, and it is a fundamental concept in materials science, chemistry, and solid-state physics.

Learn more about unit cell here:

https://brainly.com/question/31627817

#SPJ11

The equation relating standard cell potential (E°cell) and the equilibrium constant (K) when plugging in values for temperature (T), Faraday's constant (F), and the ideal gas constant (R) is: E°cell = (RT / nF) * ln(K).

The Nernst equation relates the standard cell potential (E°cell) of an electrochemical cell to the equilibrium constant (K) of the corresponding redox reaction. When considering the effect of temperature, the equation becomes: Ecell = E°cell - (RT / nF) * ln(Q), where R is the ideal gas constant, T is the temperature in Kelvin, n is the number of electrons transferred in the balanced redox equation, F is Faraday's constant, and Q represents the reaction quotient.

In the case mentioned, we are plugging in the values for temperature (298.15 K), Faraday's constant (F), and assuming room temperature. By assuming the reaction is at equilibrium, the reaction quotient Q equals the equilibrium constant K. Therefore, the equation simplifies to E°cell = (RT / nF) * ln(K).

By using this equation, we can relate the standard cell potential (E°cell) to the equilibrium constant (K) for a given redox reaction at a specific temperature.

learn more about Faraday's constant here:

https://brainly.com/question/31604460

#SPJ11

To determine the enthalpy of the reaction, we can use Hess's Law, which states that the enthalpy change of a reaction is equal to the sum of the enthalpies of formation of the products minus the sum of the enthalpies of formation of the reactants.

The enthalpy of the reaction is -453.46 kJ.

To calculate the enthalpy of the reaction, we need to know the enthalpies of formation (ΔHf) for all the reactants and products involved in the reaction. The enthalpy of formation is the enthalpy change when one mole of a compound is formed from its constituent elements in their standard states.

Once we have the enthalpies of formation for all the reactants and products, we can substitute them into the equation ΔHrxn = ΣΔHf(products) - ΣΔHf(reactants) to calculate the enthalpy change of the reaction.

Since the information provided in the question does not include the enthalpies of formation for the reactants and products, we cannot determine the specific enthalpy value using the given equation and table. Therefore, without the necessary data, we cannot provide a specific enthalpy value for the reaction.

To learn more about reaction click here : brainly.com/question/30464598

#SPJ11

The temperature inside the container is approximately 300 K.

a) To determine the pressure inside the container, we can use the ideal gas law, which relates pressure, volume, temperature, and the number of particles of gas:

PV = NkT

where P is the pressure, V is the volume, N is the number of particles (in this case, the number of neon atoms), k is the Boltzmann constant, and T is the temperature.

Solving for P, we get:

P = NkT/V

where V is the volume of the container.

Since we are not given the volume of the container, we cannot determine the pressure directly. However, we can use the root-mean-square (rms) speed of the atoms to find the average kinetic energy of each neon atom:

KE = (1/2)mv^2

where KE is the kinetic energy, m is the mass of each neon atom (20.18 u), and v is the rms speed.

Substituting the values given, we get:

KE = (1/2)(20.18 u)(690 m/s)^2 = 3.72×10^-21 J

b) We can use the equipartition theorem, which states that each degree of freedom of a particle in a gas contributes (1/2)kT to its thermal energy, to relate the average kinetic energy to the temperature:

(1/2)kT = (1/2)mv^2

Solving for T, we get:

T = (m/k)(v^2)

Substituting the values given, we get:

T = (20.18 u)(1.66×10^-27 kg/u)/(1.38×10^-23 J/K)(690 m/s)^2 ≈ 300 K

Click the below link, to learn more about Ideal gas law:

https://brainly.com/question/13821925

#SPJ11

The new freezing point for the 0.73 m solution of CCl4 in benzene will be 4.2116 °C lower than the freezing point of pure benzene.

To calculate the new freezing point for a 0.73 m solution of CCl4 in benzene, we need to use the freezing point depression equation:
ΔTf = Kf x molality
where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent (benzene), and molality is the concentration of the solute (CCl4) in moles per kilogram of solvent.
The freezing point depression constant for benzene is 5.12 °C/m, which means that for every 1 molal (1 mole per kilogram of solvent) solution of a nonvolatile solute in benzene, the freezing point of the solution will be depressed by 5.12 °C.
To find the molality of the CCl4 solution, we first need to calculate the moles of CCl4 in 1 kilogram of benzene:
0.73 m solution means that there are 0.73 moles of CCl4 per kilogram of benzene
The molar mass of CCl4 is 153.82 g/mol, so 0.73 moles of CCl4 weighs 112.12 g
The mass of benzene in 1 kg of solution is 1000 g - 112.12 g = 887.88 g.

The molality of the CCl4 solution is therefore:
molality = moles of solute / mass of solvent in kg
molality = 0.73 mol / 0.88788 kg = 0.8225 m
Now we can use the freezing point depression equation to calculate the change in freezing point:
ΔTf = Kf x molality
ΔTf = 5.12 °C/m x 0.8225 m = 4.2116 °C
Therefore, the new freezing point for the 0.73 m solution of CCl4 in benzene will be 4.2116 °C lower than the freezing point of pure benzene.

To know more about benzene visit:

https://brainly.com/question/14525517

#SPJ11

The mass of platinum plated on the electrode is 53.6 mg, which corresponds to answer choice (c).

To calculate the mass of platinum plated on the electrode, we need to use Faraday's law of electrolysis, which relates the amount of substance produced at an electrode to the quantity of electricity passed through an electrolytic cell. The formula is:

mass of substance = (current x time x atomic weight) / (Faraday constant x valence)

Where:

current is the electric current (in amperes)

time is the duration of the electrolysis (in seconds)

atomic weight is the atomic weight of the substance being plated (in grams per mole)

Faraday constant is the charge on one mole of electrons (96485 C/mol)

valence is the number of electrons transferred per mole of substance

For [tex]Pt(NO_3)_2[/tex], the atomic weight of platinum is 195.08 g/mol, and the valence is 2 (since each platinum ion accepts 2 electrons to form neutral platinum atoms). Plugging in the values:

mass of Pt = (0.500 A x 55.0 s x 195.08 g/mol) / (96485 C/mol x 2) = 0.0536 g = 53.6 mg

For more question on mass click on

https://brainly.com/question/30459977

#SPJ11

the solution of AlCl3 will have the highest concentration of solute particles and, as a result, the lowest boiling point.

The boiling point elevation of a solution is directly proportional to the concentration of solute particles. Since all the electrolytes in the given options are strong electrolytes and completely dissociate into ions in water, the solution with the highest number of ions will have the highest boiling point.

Out of the given options, AlCl3 dissociates into three ions (Al3+ and three Cl- ions) in water, while KNO3 dissociates into two ions (K+ and NO3-) and both Li2CO3 and H2SO4 dissociate into three ions (two Li+ and one CO32- for Li2CO3 and H+ and two SO42- for H2SO4).

To know more about boiling point visit:

https://brainly.com/question/2153588

#SPJ11

Upon deprotonation with LDA (lithium diisopropylamide), the enolate that would be formed depends on the substrate used.

LDA is a strong base that can deprotonate a variety of carbonyl compounds such as ketones, aldehydes, and esters. The resulting enolate can be either kinetic or thermodynamic.

If a ketone is used as the substrate, the LDA will deprotonate the alpha carbon, forming the kinetic enolate. This is due to the steric hindrance of the carbonyl group, which makes it difficult for the base to reach the beta carbon.

This kinetic enolate is less stable, but forms faster due to the lower activation energy required.

If an ester is used, the LDA will deprotonate the beta carbon, forming the thermodynamic enolate. This is because the carbonyl group of the ester is less hindered, allowing for easier access to the beta carbon.

The thermodynamic enolate is more stable, but requires a higher activation energy to form.

In summary, the enolate formed upon deprotonation with LDA depends on the substrate used and can be either kinetic or thermodynamic.

For more question on substrate

https://brainly.com/question/4047091

#SPJ11

Upon deprotonation with LDA (lithium diisopropylamide), the enolate formed would depend on the specific substrate being used. Enolates can be formed from a variety of carbonyl compounds, including ketones, aldehydes, and esters. The enolate formed would have a negative charge on the oxygen atom and a double bond between the alpha carbon and the oxygen atom. The specific structure of the enolate would depend on the specific substrate and the conditions of the deprotonation reaction.

Learn more about ketones click here:

https://brainly.com/question/30167255

#SPJ11

To determine the unknown acid, we can use the concept of equivalence point in a titration. In this case, a monoprotic acid dissolved in water and titrated with a 0.1 M NaOH solution.

At the equivalence point, the moles of acid will be equal to the moles of base. We can calculate the moles of NaOH used by multiplying the volume of NaOH solution (118.4 mL) by the molarity (0.1 M), which gives us 0.01184 moles of NaOH.

Since the acid is monoprotic, it will also have 0.01184 moles. To calculate the molar mass of the acid, we divide the mass (1.0 g) by the number of moles (0.01184 moles), which gives us approximately 84.5 g/mol.Therefore, the unknown acid has a molar mass of approximately 84.5 g/mol. Additional information or experimentation would be required to determine the specific identity of the acid.

To learn more about titration click here : brainly.com/question/31483031

#SPJ11