From given options, A, B, C, and D are all valid responses because they are all circumstances that can impact an enzyme's activity.
Enzyme catalyzed reaction Molecules move more quickly as a result of a rise in temperature, which increases the likelihood of collisions between substrates and enzymes and, ultimately, elevates enzymatic activity. As a result, there are fewer collisions and fewer enzymatic reactions as a result of a drop in temperature rather than a rise in the velocity of these molecules. Due to the ability of charges on the enzyme's amino acids to alter with pH, a change in the pH of the environment in which the enzyme is present may result in a change in the shape of the enzyme. This could change the enzyme's active site, improving or decreasing the enzyme's ability to bind substrate.For more information on rate of reaction kindly visit to
https://brainly.com/question/30546888
#SPJ1
When a particular ionic solid begins to dissolve in water, the temperature rises dramatically. For the dissolution of this solid in pure water we can state that __O Lattice energy is larger than enthalpy of hydration in magnitudeO Enthalpy of solvation is positiveO Enthalpy of hydration is positiveO Enthalpy of solution is negativeO Enthalpy of solution is positive
The rise in temperature during the dissolution of an ionic solid in water is a result of the release of energy, indicating that the process is exothermic.
The enthalpy of solution is the difference between the energy required to separate the ionic solid into its constituent ions, known as the lattice energy, and the energy released during the hydration of these ions by water molecules. Since the dissolution of the solid is exothermic, the enthalpy of solution is negative. Therefore, we can state that the correct answer is "O Enthalpy of solution is negative" . Additionally, since the temperature rises dramatically during the dissolution of the ionic solid, it indicates that the magnitude of the lattice energy is greater than the enthalpy of hydration of the ions in water.
Find out more about enthalpy of solution
brainly.com/question/14529494
#SPJ4
which of the following is the correct chemical formula for the final product after heating mnso4 h20
MnSO4•H2O is the correct chemical formula for the final product after heating MnSO4•H2O.
This compound is known as Manganese (II) sulfate monohydrate. When heated, the water of hydration is lost, leaving MnSO4 as the final product.Manganese (II) sulfate monohydrate is an inorganic compound composed of manganese(II) cations, sulfate anions, and one water molecule of hydration. It is a white crystalline solid with the formula MnSO4•H2O. It is used as an oxidizing agent, a fertilizer, and a micronutrient in agriculture. It may also be used to test for the presence of phosphate and carbonate ions.Manganese (II) sulfate monohydrate is a white crystalline solid that is used as a fertilizer and in the production of a variety of chemical products. It is made up of one manganese atom, four oxygen atoms, one sulfur atom, and four water molecules.
learn more about sulfate anions Refer:brainly.com/question/24245877
#SPJ4
according to this equation, how many moles of ammonia (nh3) were used if 12.2 moles of ammonium sulfate (nh4)2so4 were made?
If 12.2 moles of (NH₄)₂SO₄ were produced, then 6.1 moles of NH₃ were used.
Assuming the balanced chemical equation is:
2 NH₃ + H₂SO₄ → (NH₄)₂SO₄
This equation shows that two moles of ammonia are required for every one mole of ammonium sulfate produced. Therefore, to find the number of moles of ammonia used, we can use the following calculation:
moles of NH₃= moles of (NH₄)₂SO₄ / 2
moles of NH₃ = 12.2 moles / 2
moles of NH₃ = 6.1 moles
Therefore, if the balanced chemical equation is 2 NH₃ + H₂SO₄ → (NH₄)₂SO₄ and 12.2 moles of (NH₄)₂SO₄ were produced, then 6.1 moles of NH₃ were used.
To know more about the ammonium sulfate, here
brainly.com/question/10834028
#SPJ4
Atoms of an element ex having two valence of electrons come into contact with element why that has seven valence electrons. Which of these statements is probably not true? A the compound is ionic. B two different ions are formed. C X +1 is formed D Y -1 is formed E none of these
The statement X +1 is formed is not true.
How is an ionic compound formed?Ionic substances are formed through the process of ionization, which occurs when atoms or molecules gain or lose electrons. This results in the formation of ions, which are charged particles. When ions of opposite charge come together and form a crystal lattice structure, an ionic substance is formed.
For example, when a metal atom reacts with a non-metal atom, the metal atom can lose electrons to the non-metal atom, forming positively charged ions (called cations) and negatively charged ions (called anions). These ions are held together in a repeating pattern by ionic bonds, which are strong electrostatic forces. The resulting substance is an ionic compound.
Learn more about ions:https://brainly.com/question/14982375
#SPJ1
There are two stable isotopes of chlorine: chlorine -35 and chlorine-37. Given that the average atomic mass of a chlorine atom is 35.45 amu, which if the following statements is true? A. chlorine contains almost exclusively Cl-37 with very little Cl-35 B. Chlorine contains more Cl-35 than Cl-37 C. Chlorine contains roughly equal amounts of Cl-35 and Cl-37 D. Chlorine contains more Cl-37 than Cl-35
Given that the average atomic mass of a chlorine atom is 35.45 amu, then the true statement would be that Chlorine contains roughly equal amounts of Cl-35 and Cl-37. The correct answer is C.
The average atomic mass of an element is the weighted average of the masses of its naturally occurring isotopes. In the case of chlorine, the atomic mass of the two stable isotopes (chlorine-35 and chlorine-37) is close to each other.
Chlorine-35 has an atomic mass of 34.97 amu and makes up about 75% of naturally occurring chlorine atoms, while chlorine-37 has an atomic mass of 36.97 amu and makes up about 25% of naturally occurring chlorine atoms.
The average atomic mass of chlorine can be calculated using the following formula:
average atomic mass = (fractional abundance of isotope 1 x mass of isotope 1) + (fractional abundance of isotope 2 x mass of isotope 2)
average atomic mass = (0.75 x 34.97 amu) + (0.25 x 36.97 amu)
average atomic mass = 26.23 amu + 9.24 amu
average atomic mass = 35.47 amu
This is very close to the reported average atomic mass of chlorine (35.45 amu), which confirms that chlorine contains roughly equal amounts of Cl-35 and Cl-37.
To learn more about atomic mass unit (amu) visit: https://brainly.com/question/29793336
#SPJ4
Based on the data table, one scientist concludes that the mass of PbCr04
formed depends only on the amount of K₂CrO4 added, and another scientist
concludes that the mass of PbCrO4 formed depends on the amount of the
limiting reactant. How might this conflict be resolved?
Sample IM HCI
(mL)
50
50
25
1
2
3
2M AgNO3
(ml)
50
25
50
AgCl
formed (g)
7.2
7.2
3.6
OA. Experiment further, using different amounts of each reactant as
the limiting reactant.
B. Write the balanced chemical equation for this reaction and
compare proportions resulting from the equation.
OC. Assume the same reactant is limiting in each trial.
O D. Determine how each scientist's background affects the
conclusions.
as anderes
The yield of a reaction depends on the limiting reactant of the reaction. Hence, write the balanced chemical equation for this reaction and compare proportions resulting from the equation.
What is limiting reactant ?A limiting reactant in a reaction is the reactant which is fewer in amount or consume early without complete reaction with other reactants. Hence, as soon as this reactant is consume, the reaction stops.
For the given reaction, we must write the balanced reaction for the formation of the product lead chromate. By writing the equation, we can understand the correct stoichiometry of each reactants and products.
The reactant which is taken in lower quantity than what is required for complete reaction with the reagents will determine the reaction yield and the amount of product formed.
Find more on limiting reactants:
brainly.com/question/14225536
#SPJ1
What is the energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹?
(h = 6.626 × 10⁻³⁴ J • s)
The energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹ is 4.68 × 10⁻¹⁹ J.
What is Frequency?
Frequency is a measure of the number of cycles of a repeating event per unit time. It is commonly used to describe the oscillation of waves, such as sound waves or electromagnetic waves. The unit of frequency is hertz (Hz), which represents one cycle per second.
The energy (E) of a photon can be calculated using the equation:
E = hf
Given:
Frequency (f) = 7.07 × 10¹⁴ s⁻¹
Planck's constant (h) = 6.626 × 10⁻³⁴ J • s
Using the equation, we get:
E = hf
E = 6.626 × 10⁻³⁴ J • s × 7.07 × 10¹⁴ s⁻¹
E = 4.68 × 10⁻¹⁹ J
Therefore, the energy of a photon with a frequency of 7.07 × 10¹⁴ s⁻¹ is 4.68 × 10⁻¹⁹ J.
Learn more about Frequency from given link
https://brainly.com/question/254161
#SPJ1
Explore the Model screen of the simulation. As you explore, answer the following questions. a.How does adding an atom affect the position of existing atoms or lone pairs? b. How does adding a lone pair affect the position of existing atoms and lone pairs?
The answers for multiple questions are given below.
(a)
When an atom is added it increases the effective nuclear charge which changes the position of existing atoms and lone pairs.
(b)
In the presence of additional lone pair, the lone pair - lone pair repulsions increases which affects the position of existing atoms and lone pairs.
Generally, lone pairs or often a single unpaired electron, electron pairs are defined as particles in bonds. Generally, the three additional pairs of electrons upon every atom are known as lone pairs, whereas the electron pair which are shared by the atoms is called as a bonding pair. Basically, the covalent bonding process excludes lone pairs.
The shape of the molecule is generally altered by the presence of an additional atom. Bonding electron pairs that lone electron pairs always resist one another since, electrons had same charge (i.e., negative charge).
Learn more about bonding pairs from the link given below.
https://brainly.com/question/30194336
#SPJ4
(Urgent)
5 moles of glucose is dissolved in 10 liters of water , what is the concentration of the solution in molarity?
The concentration of the solution in molarity can be calculated as follows:
Molarity (M) = moles of solute/liters of solution
In this case, the number of moles of glucose is 5 moles and the volume of the solution is 10 liters. So,
M = 5 moles / 10 liters = 0.5 M
Therefore, the concentration of the glucose solution is 0.5 M.
the activation energy, ea, for a particular reaction is 37.8 kj/mol. if the rate constant at 280 k is 0.178 m/s, then what is the value of the rate constant at 445 k? (r
The rate constant at 445 K is 0.0122 m/s.
The rate constant at 445 K for the reaction with an activation energy of 37.8 kJ/mol can be calculated using the Arrhenius equation:
k = A*e^{(-Ea/RT)}
Where k is the rate constant at 445 K, A is the pre-exponential factor, Ea is the activation energy, R is the ideal gas constant (8.314 J/molK) and T is the temperature in Kelvin. Substituting the values given we get:
k = 0.178 * e^{(-37.8*10^3/(8.314*445)}
Therefore, the rate constant at 445 K is 0.0122 m/s.
To know more about rate constant, refer here:
https://brainly.com/question/14977272#
#SPJ11
4. If you were to place the skater at the 5-meter mark, how high would the skater go on the other side of the track? Write your prediction, then try it and state whether it matched your prediction or not and, if not, what happened instead.
If the skater starts at the 5-meter mark, I predict that the skater will reach the same height on the other side of the track. This is because the parabolic shape of the skater's trajectory is symmetrical, meaning that if the skater reaches a certain height at one point, they will reach the same height at the same distance on the opposite side.
This prediction can be tested by drawing a parabolic shape to represent the skater's trajectory and finding the height at the 5-meter mark and the 5-meter mark on the other side of the track.
Which of the following contains the MOST atoms? You shouldn't need to do a calculation here.
O 10.0 g Mg
O 10.0 g Ne
O 10.0 g Kr
O 10.0 g Ar
O 10.0 g He
The substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).
What is Atom?
An atom is the basic unit of matter that is composed of three types of subatomic particles: protons, neutrons, and electrons. Atoms are incredibly small and are the building blocks of all matter in the universe.
The nucleus of an atom is made up of positively charged protons and neutral neutrons. The number of protons in an atom's nucleus determines its atomic number, which defines its unique chemical identity. The electrons, which are negatively charged, orbit the nucleus in shells and interact with other atoms to form chemical bonds.
The number of atoms in a substance is determined by its molar mass, which is the mass of one mole of the substance in grams. One mole of any substance contains Avogadro's number of atoms, which is approximately 6.022 x 10^23.
The molar masses of the given substances are:
Mg: 24.31 g/mol
Ne: 20.18 g/mol
Kr: 83.80 g/mol
Ar: 39.95 g/mol
He: 4.00 g/mol
Since the amount of each substance is the same (10.0 g), we can compare the number of atoms by comparing their molar masses. The substance with the lowest molar mass will contain the most atoms, since the same mass of that substance corresponds to a greater number of moles.
Therefore, the substance with the most atoms is He (10.0 g), since it has the lowest molar mass (4.00 g/mol).
Learn more about Atom from given link
https://brainly.com/question/17545314
#SPJ4
Explain the meaning of each term within the Arrhenius
equation: activation energy, frequency factor, and exponential
factor. Use these terms and the Arrhenius equation to explain
why small changes in temperature can result in large changes in
reaction rates.
Small changes in temperature can have a large effect on reaction rates because the exponential factor in the Arrhenius equation is very sensitive to changes in temperature.
The Arrhenius equation is a mathematical formula that describes the relationship between temperature and the rate of a chemical reaction. It is often written as: k = A × [tex]e^{-Ea/RT}[/tex]
The activation energy (Ea) is the minimum energy required for a reaction to occur. In other words, reactant molecules need to have at least this amount of energy in order to break the bonds that hold them together and form the new products. The activation energy can be thought of as the energy barrier that reactants must overcome to form products.
The frequency factor (A) is a constant that reflects the frequency of successful collisions between reactant molecules. A higher frequency factor means that more successful collisions are occurring, which generally leads to a faster reaction rate.
The exponential factor, [tex]e^{-Ea/RT}[/tex], is a mathematical term that describes how the rate constant changes with temperature. This term incorporates the activation energy and temperature in a way that reflects the probability that a given collision between reactant molecules will lead to a successful reaction. At higher temperatures, the exponential factor is larger, which means that the rate constant (k) is higher and the reaction proceeds more quickly.
To know more about Arrhenius equation here
https://brainly.com/question/30514582
#SPJ4
Please Help
Inorganic Chemistry
The Kp value, at 500 K for the reaction 2NO(g) + Cl2(g) ↔ 2NOCl(g) is Kp=0.01.
2NO(g) + Cl2(g) ↔ 2NOCl(g)
Coefficient of the reaction equation: 2 - 1 – 2
Several moles of gas at equilibrium:
moles of NO gas = 2 molesmoles of gas Cl2 = 1 molemoles of NOCl gas = 2 molesThe number of moles of gas = 5 moles
Calculate the partial pressure of NO gas.PNO = (mol NO/total moles) x Ptotal
PNO = (2/5) x 500
PNO = 200 K
Calculate the partial pressure of Cl gas.PCl = (mol Cl/mol total) x Ptotal
PCl = (1/5) x 500
PCl = 100 K
Calculate the partial pressure of NOCl gas.PNOCl = (mol NOCl/mol total) x Ptotal
PNOCl = (2/5) x 500
PNOCl = 200 K
Calculating the value of Kp:
Kp = (right side partial pressure)[tex]^{coefficient}[/tex]/(left side partial pressure)[tex]^{coefficient}[/tex]
Kp = [PNOCl]²/[PNO]²[Cl]
Kp = [200]²/[200]²[100]
Kp = 4 x 10⁴/4 x 10⁶
Kp = 0.01
Answer is Kp = 0.01
Learn more about the Kp value at https://brainly.com/question/15521600.
#SPJ1
order the following steps of the chymotrypsin mechanism. not all steps may be given. top label: deprotonation of ser by hisdeprotonation of ser by his
I assume that the prompt got cut off. Based on the given information, the correct order of the steps of the chymotrypsin mechanism is:
Deprotonation of Serine (Ser) by Histidine (His).Attack of the peptide bond by the deprotonated Serine hydroxyl group.Formation of a tetrahedral intermediate.Collapse of the tetrahedral intermediate and cleavage of the peptide bond.Release of the first product and formation of an acyl-enzyme intermediate.Note: The prompt seems to be asking for two labels, but only one label is given. Therefore, I provided the answer assuming that the label provided refers to the first step of the chymotrypsin mechanism.
For more questions like Chymotrypsin mechanism visit the link below:
https://brainly.com/question/11477380
#SPJ4
how do you balance a chemical reaction?
it is blank to result in increase o2 delivery to muscles because a drop in co2 will blank the stability of the t state, which results in a blank p50 and blank o2 release from hemoglobin.
According to the Bohr effect, an increase in the supply of oxygen (O2) to muscles will result from a drop in carbon dioxide (CO2) levels.
The reason for this is that a decrease in CO2 weakens the T state of haemoglobin, which is the type of haemoglobin that binds oxygen. The P50 level (the partial pressure of oxygen at which haemoglobin is half-saturated with oxygen) decreases and the release of O2 from haemoglobin increases due to the T state's poorer stability. Enhanced O2 supply to muscles is the effect of this increased O2 release. The Bohr effect is a phenomena wherein when the pH of the immediate environment falls, hemoglobin's affinity for oxygen also diminishes.
learn more about Bohr effect Refer:brainly.com/question/15970643
#SPJ4
Each arrow shows an electron moving from one energy level to another. Which transitions will release energy?
A and D
only A
only C
B dan C
The Transition state A and D will release energy.
When an electron moves from a higher energy level to a lower energy level, it releases energy. This can be seen in the diagram as the arrows pointing downwards. Therefore, transitions A and D will release energy, while transitions B and C will not.
It is important to remember that energy is always conserved, so when an electron moves from one energy level to another, the energy is not lost, but rather transferred in the form of light or heat.
In summary, the transitions that will release energy are A and D, as they involve an electron moving from a higher energy level to a lower energy level.
To know more about Transition click on below link:
https://brainly.com/question/20750330#
#SPJ11
is the formula of both copper (1) superoxide and copper (2) peroxide CuO2?
No, The formula CuO2 is for copper super peroxide
The formula of copper peroxide is Cu2H2O2
Lab coats provide an additional layer of protection in the laboratory andhelp prevent insidious exposure to potential biological, chemical, and other contaminants. In choosing a basic lab coat, which of the following fabric is acceptable? O 100% cotton O 60% cotton, 40% polyester O 100% polyester O 60% polyester, 40% cotton
The choice of fabric for a lab coat will depend on the specific hazards present in the laboratory and the level of protection required for the lab workers. It is important to consult with safety guidelines and regulations to ensure that the lab coat selected meets the necessary safety standards. Select a fabric that will provide adequate protection.
Of the options listed, a 100% cotton lab coat would not be ideal for all laboratory settings as it can be easily penetrated by chemicals and biological agents. A 60% cotton, 40% polyester blend may offer some added protection due to the presence of polyester, but it still may not be sufficient for all lab environments.
A 100% polyester lab coat would offer better protection against chemical and biological exposure than the cotton options, but it may not be as comfortable to wear as cotton. A 60% polyester, 40% cotton blend may provide a balance of protection and comfort, but the level of protection provided may still depend on the specific type of fabric and construction of the lab coat.
Learn more about laboratory protection here: https://brainly.com/question/8363737
#SPJ4
Which of the following samples contain the greatest number of molecules?
1.00 grams of carbon monoxide
1.00 grams of carbon dioxide
1.00 grams of carbonate
All samples listed above have the same number of molecules
The sample contain the greatest number of molecules is 1.00 grams of carbon dioxide. Therefore, option B is correct.
What do you mean by the molecule ?The term molecule is defined as the smallest component of a material that possesses both its chemical and physical characteristics. One or more atoms make up molecules.
There are three different kinds of molecules: atom-sized molecules, element-sized molecules, and compound-sized molecules.
1.00 grams of carbon monoxide,1.00 grams of carbon dioxide and 1.00 grams of carbonate, atoms present in these molecules are different so 1.00 grams of carbon dioxide contain the greatest number of molecules.
Thus, option B is correct.
To learn more about the molecule, follow the link;
https://brainly.com/question/19922822
#SPJ1
which compound can lower the freezing temperature of water, similarly to the antifreeze used in automobiles, and allow certain fish to remain active in very cold water? please choose the correct answer from the following choices, and then select the submit answer button. answer choices acetylcholine
"antifreeze proteins" or "ice-binding proteins", lower the freezing temperature of water, similarly to the antifreeze used in automobiles, and allow certain fish to remain active in very cold water.
Antifreeze proteins function by binding to ice crystals and preventing them from growing, which in turn prevents the formation of ice within the tissues of the organism. This allows the organism to remain active in very cold water, even when the water temperature is below the freezing point of pure water.
Acetylcholine is not a compound that can lower the freezing temperature of water.It is important to note that antifreeze proteins are a specialized adaptation that has evolved in certain organisms to help them survive in extremely cold environments, and they should not be confused with the antifreeze used in automobiles, which is a mixture of chemicals designed to lower the freezing point of the liquid in a car's cooling system.
To know more about "antifreeze proteins" here
https://brainly.com/question/28546218
#SPJ4
The rate law expresses the relationship of the rate of a reaction to the rate constant and the concentration of the reactants raised to some powers for the general reaction.
aA+bB→cC+dD
Rate law takes the form
r=k[A]x[B]y
where x and y are number that must be determined experimentely k is the rate constant and [A] and [B] are concentration of A & B respectively.
Gaseous reaction A→B+C
follows first order kinetics concentration of A changes from A changes from 1M to 0.25M in 138.6 min.Find the rate of reaction when conc. of A is 0.1 M.
The rate law is the relationship between the rate of a reaction and the rate constant, as well as the concentration of reactants raised to various powers.
What is rate law ?In chemical kinetics, the rate law (also known as the rate equation) is a mathematical equation that describes the rate of a chemical reaction as a function of the concentrations of the reactants. The rate law provides a quantitative way of expressing how the rate of a reaction depends on the concentration of each reactant, as well as any other factors that may affect the reaction rate, such as temperature or the presence of a catalyst. The general form of a rate law is:
rate = k[A]^m[B]^n
where "rate" is the rate of the reaction, [A] and [B] are the concentrations of the reactants A and B, respectively, and k is the rate constant. The exponents m and n are the reaction orders with respect to A and B, respectively, and they determine how the rate of the reaction changes with changes in the concentration of each reactant.
0.072 M/min is the correct answer.
r2 = 0.2/5
r1/r2= [A1/A2]m
K=1/25
r= K×1/8= 0.072 M/min
The between relationship the rate of a reaction and the rate constant, as well as the concentration of the reactants raised to various powers for the overall process, is expressed by the rate law.
To learn more about the rate law, click the given link ;
brainly.com/question/7694417
#SPJ4
What minerals are formed or dissolved in water according to the amount of carbonic acid present?
Water containing carbonic acid can react with minerals like calcite (CaCO₃) and dolomite (CaMg(CO₃)₂) to dissolve them, resulting in the formation of bicarbonate (HCO₃⁻) and calcium or magnesium ions in solution.
When carbonic acid is present in water, it can react with minerals such as calcite (CaCO₃) and dolomite (CaMg(CO₃)₂) to dissolve them, forming bicarbonate (HCO₃⁻) and calcium or magnesium ions in solution. This process is known as chemical weathering and can result in the formation of underground caves and sinkholes.
On the other hand, when the concentration of carbonic acid decreases, the reverse reaction can occur, and minerals such as calcium carbonate can precipitate out of solution, forming deposits such as stalactites and stalagmites in caves.
To know more about the carbonic acid, here
brainly.com/question/17584484
#SPJ4
A compound, C6H14, produces a 1H NMR spectrum with four dustinct signals. The steps made by the integral trace measure 21, 42, 28 and 7 mm. Complete the table below to show the number of protons associated with each signal. Integral Protons21 mm, 42 mm, 28 mm, 7 mm
Integral: Protons:
21 mm 1 proton
42 mm 2 protons
28 mm 2 protons
7 mm 3 protons
To determine the number of protons associated with each signal, we need to look at the relative areas under each peak in the NMR spectrum, which are represented by the integral trace. The integral trace values of 21, 42, 28, and 7 mm represent the relative areas under each of the four distinct signals in the NMR spectrum.
The general rule is that the area under a peak in an NMR spectrum is proportional to the number of protons giving rise to that signal. Therefore, we can assign the number of protons associated with each signal by comparing the relative sizes of the integrals.
In this case, the largest integral corresponds to the signal with 2 protons (42 mm), so we can assign 2 protons to that signal. We can then assign the number of protons associated with the other signals by using the ratio of the integrals. For example, the integral of 21 mm is roughly half the size of the 42 mm integral, so we can assign 1 proton to the signal with an integral of 21 mm.
Using this method, we can assign the number of protons associated with each signal as shown in the table above.
Learn more about proton signal here: https://brainly.com/question/29769211
#SPJ1
What is the rate law for this reaction? Express the rate law symbolically in terms of k, [A], and [B].
Consider the reaction A + 2B → C whose rate at 25° C was measured using three different sets of initial concentrations as listed in the following table:
Trial [A] (M) [B] (M) Rate (M/s)
1 0.30 0.050 5.4 x 10^-3
2 0.30 0.100 1.1 x 10^-2
3 0.60 0.050 2.2 x 10^-2
The rate becomes: 0.0225 m/sec which symbolically in terms of k, [A], and [B]. Consider the reaction A + 2B → C whose rate at 25° C.
What is rate constants?The rate constant is the quantity that expresses the connection between the molar concentration of the reactants and the rate of the chemical reaction. The rate constant rises as the reactant concentrations fall. Even if the reactant concentrations fluctuate, the rate constant remains constant. Depending on the kind of reaction and which reactants' concentrations vary, the rate constant will change. The proportionality constant (k) that links the pace of the reaction to reactant concentrations is known as the specific rate constant.
now calculate the rate constant using first equation
rate = k[A]²[B]
take the first row from table it not necessary you can take any
6.0×10⁻⁴ = K[0.1]²[0.05]
K = (6.0 × 10⁻⁴) / (5 × 10⁻⁴)
K = 1.2 mol⁻² lit² sec⁻¹
now use the same equation
substitute the given concentration and use the same K value find the rate constant
rate = k[A]²[B]
rate = 1.2 [0.5]²[0.075]
rate = 0.0225 m/sec
To know more about rates refer to:
https://brainly.com/question/24795637
#SPJ1
If the total pressure of a mixture of O2 N2, and H2 is 902 mmHg, what is the pressure of O, if there pressure of N2 is 355 mmHg N2 and H, is 0.3 atm?
Considering the Dalton's partial pressure, the pressure of O₂ in the mixture is 319 mmHg.
Definition of Dalton's partial pressureDalton's law states that the total pressure of a gas mixture is equal to the sum of the partial pressures of the gas:
[tex]P_{T}[/tex]= P₁ + P₂ + ... + Pₙ
where:
n is the amount is the amount of gases present in the mixture.the partial pressure of each gas is the pressure that the gas would exert if it were the only gas in the container.This relationship is due to the assumption that there are no attractive forces between the gases.
Pressure of O₂In this case, you know:
Total pressure= 902 mmHgPressure of O₂= ?Pressure of N₂= 355 mmHgPressure of H₂= 0.3 atm= 228 mmHg (being 1 atm= 760 mmHg)If the total pressure of the mixture is:
Total pressure= Pressure of O₂ + Pressure of N₂ + Pressure of H₂
the pressure of O₂ can be calculated as:
902 mmHg= Pressure of O₂ + 355 mmHg + 228 mmHg
Solving:
902 mmHg= Pressure of O₂ + 355 mmHg + 228 mmHg
902 mmHg= Pressure of O₂ + 583 mmHg
902 mmHg - 583 mmHg= Pressure of O₂
319 mmHg= Pressure of O₂
Finally, the pressure of O₂ is 319 mmHg.
Learn more about Dalton's partial pressure:
brainly.com/question/14239096
#SPJ1
Three aqueous solutions of different volumes are prepared. One is 3 m in glucose, one is 3 m in fructose, and one is 3 m in ethanol (C2H5 OH). Which of the following must these solutions have in common? Select all that apply: They all have the same density They contain the same total number of moles of solute They contain the same mass of solute. They have the same boiling points.
The three solutions with different volumes, all being 3M in glucose, fructose, and ethanol must contain the same total number of moles of solute.
This is because the concentration of each solution is the same, and the number of moles of a substance is directly proportional to its concentration and volume. Therefore, if the concentration is the same for each solution, the total number of moles of solute must also be the same. However, the solutions may not necessarily have the same density, mass of solute, or boiling points. The density of a solution is affected by factors such as temperature and pressure, and the mass of solute depends on the molar mass of each solute. The boiling point of a solution is influenced by the concentration and identity of the solutes, as well as external factors such as pressure.
Learn more about solute :
https://brainly.com/question/7932885
#SPJ4
Which transformation will create $Q'R'S'T'$ , a quadrilateral that is similar but not congruent to quadrilateral $QRST$ ?
To create a quadrilateral that is similar but not congruent to another quadrilateral, you can apply a non-uniform dilation transformation.
What is non-uniform dilation transformation?A non-uniform dilation transformation changes the size of a shape by a different scale factor in different directions. This means that the corresponding sides of the similar figures will have different lengths, and the corresponding angles will have the same measure.
To apply a non-uniform dilation transformation to quadrilateral $QRST$, you would need to specify different scale factors for each direction. For example, you could specify a scale factor of 2 in the x-direction and a scale factor of 3 in the y-direction. The resulting transformed quadrilateral, $Q'R'S'T'$, would have sides that are twice as long as the corresponding sides in the x-direction and three times as long as the corresponding sides in the y-direction. The angles of $Q'R'S'T'$ would be the same as the angles of $QRST$.
It is important to note that a non-uniform dilation transformation will not preserve the ratios of side lengths between similar figures, so $Q'R'S'T'$ will not be congruent to $QRST$.
Learn more about non-uniform dilation transformation, here:
https://brainly.com/question/18242733
#SPJ9
what is the name for the ion element Na+