Answer:
Potassium carbonate (K₂CO₃)
Explanation:
The compounds dissociate into ions in water, as follows:
K₂CO₃ → 2 K⁺ + CO₃⁻ ⇒ 3 dissolved particles per mole
NaI → Na⁺ + I⁻ ⇒ 2 dissolved particles per mole
KBr → K⁺ + Br⁻ ⇒ 2 dissolved particles per mole
CH₃OH → CH₃O⁻ + H⁺ ⇒ 2 dissolved particles per mole
NH₄Cl → NH₄⁺ + Cl⁻ ⇒ 2 dissolved particles per mole
Therefore, the largest number of dissolved particles per mole of dissolved solute is produced by potassium carbonate (K₂CO₃).
In water, Vanillin, C8H8O3, has a solubility of 0.070 moles of vanillin per liter of solution at 25C. What will be produced if 5.00 g of vanillin are added to 1 L of water at 25 C?
Answer:
The full amount (5.00 g) will be dissolved in 1 L of water at 25°C.
Explanation:
The molecular weight (MW) of Vanillin (C₈H₈O₃) is calculated from the chemical formula as follows:
MW(C₈H₈O₃) = (12 g/mol x 8) + (1 g/mol x 8) + (16 g/mol x 3) = 152 g/mol
If 0.070 mol of C₈H₈O₃ are soluble per liter of water at 25°C, the maximum mass that can be dissolved in 1 L is:
0.070 mol x 152 g/mol = 10.64 g
Since 5.00 g is lesser than the maximum amount that can be dissolved (10.64 g), the added amount will be completely dissolved in 1 L of water at 25°C.
Assign priorities in the following set of substituents according to Cahn-Ingold-Prelog rules.
-OCH3 -Br -Cl -CH2OH
А B C D
(Provide your ranking through a string like abcd, starting with the one with the highest priority).
Answer:
Assign priorities in the following set of substituents according to Cahn-Ingold-Prelog rules.
-OCH3 -Br -Cl -CH2OH
Explanation:
To give priorities for the substituents that are attached to chiral carbon and to assign either R or S-configuration the following rules were proposed:
1. The atom with the highest atomic number is given first priority.
2. If the Groups attached to chiral carbon are having the same first atom, then check for the atomic number of the second atom.
Among the given groups,
-Br has the highest atomic number, so it is given first priority.
Then, -Cl.
Then, -OCH3
and the last one is -CH2OH.
Hence, the order is :
BCAD.
Calculate the vapor pressure (in torr) at 298 K in a solution prepared by dissolving 46.8 g of the non-volatile non-electrolye glucose in 117 g of methanol. The vapor pressure of methanol at 298 K is 122.7 torr. Enter your answer to 2 decimal places.
Answer: The total partial pressure of the solution is 131.37 torr.
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For glucose:Given mass of glucose = 46.8 g
Molar mass of glucose = 180 g/mol
Plugging values in equation 1:
[tex]\text{Moles of glucose}=\frac{46.8g}{180g/mol}=0.26 mol[/tex]
For methanol:Given mass of methanol = 117 g
Molar mass of methanol = 32 g/mol
Plugging values in equation 1:
[tex]\text{Moles of methanol}=\frac{117g}{32g/mol}=3.66 mol[/tex]
Mole fraction is defined as the moles of a component present in the total moles of a solution. It is given by the equation:
[tex]\chi_A=\frac{n_A}{n_A+n_B}[/tex] .....(2)
where n is the number of moles
Putting values in equation 2:
[tex]\chi_{methanol}=\frac{3.66}{0.26+3.66}=0.934[/tex]
Raoult's law is the law used to calculate the partial pressure of the individual gases present in the mixture. The equation for Raoult's law follows:
[tex]p_A=\chi_A\times p_T[/tex] .....(3)
where [tex]p_A[/tex] is the partial pressure of component A in the mixture and [tex]p_T[/tex] is the total partial pressure of the mixture
We are given:
[tex]p_{methanol}=122.7torr\\\chi_{methanol}=0.934[/tex]
Putting values in equation 3, we get:
[tex]122.7torr=0.066\times p_T\\\\p_T=\frac{122.7torr}{0.934}=131.37torr[/tex]
Hence, the total partial pressure of the solution is 131.37 torr.
Select the missing words to complete the definition of buffer capacity. Buffer capacity is the _____________ of acid or base a buffer can handle before pushing the _____________ outside of the buffer range.
Answer:
amount, pH value.
Explanation:
The buffer range is the pH range in which the buffer performs optimally, i.e., neutralizes even when a strong acid or base is introduced to it and resists any major change in its pH value.
The buffer capacity is the amount of acid or base that can be added before the pH of the buffer solution changes significantly.
Thus, the final statement becomes,
Buffer capacity is the amount of acid or base a buffer can handle before pushing the pH value outside of the buffer range.
Answer:
Amount
pH value
Buffer capacity is the amount of acid or base a buffer can handle before pushing the pH outside of the buffer range.
A buffer however consists of a weak acid and its conjugate base.Its major advantage is the ability to resist changes in pH when an acid or a base is added to the solution.
The human blood is also an example of a buffer solution as it is able to resist changes in pH when we eat or drink certain types of food.
An example of a buffer include acetic acid (HC₂H₃O₂) which is a weak acid and sodium acetate (NaC₂H₃O₂) which is a salt derived from that acid).
Read more on https://brainly.com/question/24188850
g A sample of chlorine gas starting at 681 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 513.7 mL. What was the initial volume, in mL, of the chlorine gas container if the process was performed at constant temperature?
Answer:
747.5 mL
Explanation:
Assuming ideal behaviour, we can solve this problem by using Boyle's law, which states that at constant temperature:
P₁V₁ = P₂V₂Where in this case:
P₁ = 681 mm HgV₁ = ?P₂ = 991 mm HgV₂ = 513.7 mLWe input the data given by the problem:
681 mm Hg * V₁ = 991 mm Hg * 513.7 mLAnd solve for V₁:
V₁ = 747.5 mLis -2 degrees Fahrenheit warmer or is -17 degrees fahrenheit?
Di- n- pentyl ether can be converted to 1- bromopentane by treatment with HBr through essentially a(n) ________ mechanism.
Answer:
SN1 mechanism
Explanation:
The mechanism of this reaction is shown in the image attached.
The Di- n- pentyl ether is first protonated. The CH3(CH2)4OH is now a good leaving group as shown.
The attack of the bromide ion on the cation formed completes the mechanism to yield 1- bromopentane as shown in the mechanism.
A student obtained an unknown metal sample that weighed 65.3 g and at a temperature of 99.8oC, he placed it in a calorimeter containing 43.7 g of water at 25.7oC. At equilibrium the temperature of the water and metal was 34.5oC. Knowing the specific heat of the water to be 4.18 J/goC, what is the specific heat of the metal
Answer:
0.377 J/gºC
Explanation:
From the question given above, the following data were obtained:
Mass of metal (Mₘ) = 65.3 g
Initial temperature of metal (Tₘ) = 99.8 °C
Mass of water (Mᵥᵥ) = 43.7 g
Initial temperature of water (Tᵥᵥ) = 25.7 °C
Equilibrium temperature (Tₑ) = 34.5 °C
Specific heat capacity of water (Cᵥᵥ) = 4.18 J/gºC
Specific heat capacity of metal (Cₘ) =?
The specific heat capacity of metal can be obtained as illustrated below:
Heat lost by metal = heat gained by water.
MₘCₘ(Tₘ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Cᵥᵥ)
65.3 × Cₘ (99.8 – 34.5) = 43.7 × 4.18 (34.5 – 25.7)
65.3Cₘ × 65.3 = 182.666 × 8.8
4264.09Cₘ = 1607.4608
Divide both side by 4264.09
Cₘ = 1607.4608 / 4264.09
Cₘ = 0.377 J/gºC
Therefore the specific heat capacity of the metal is 0.377 J/gºC
If a student drops 2.3g pieces of magnesium into a flask of hydrochloric acid, this reaction occurs: Mg + 2HCl= MgCl2 + H2
How many liters of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K
Answer:
1.2 L
Explanation:
Step 1: Write the balanced equation
Mg + 2 HCl ⇒ MgCl₂ + H₂
Step 2: Calculate the moles corresponding to 2.3 g of Mg
The molar mass of Mg is 24.31 g/mol.
2.3 g × 1 mol/24.31 g = 0.095 mol
Step 3: Calculate the moles of H₂ produced
0.095 mol Mg × 1 mol H₂/1 mol Mg = 0.095 mol H₂
Step 4: Calculate the volume occupied by the hydrogen
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T/P
V = 0.095 mol × (0.0821 atm.L/mol.K) × 298 K/2 atm = 1.2 L
how many lone pair electrons are on the central oxygen atom in the Lewis structure for dinitrogen pentoxide 9
Answer:
Two
Explanation:
Lone pairs are electron pairs on an atom that resides only with one of the atoms in a molecule.
Dinitrogen pentaoxide is shown in the image attached. There are five oxygen atoms and two nitrogen atoms in the molecule. The molecule has a total of 40 valence electrons.
There are two electrons present on the central oxygen atom in the Lewis structure of dinitrogen pentaoxide as shown in the image attached.
g n the following three compounds(1,2,3) arrange their relative reactivity towards the reagent CH3Cl / AlCl3. Justify your order
Answer:
3 > 2> 1
Explanation:
Aromatic compounds undergo electrophilic substitution reaction which passes through a positively charged intermediate to yield the product.
Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene molecule depending on the nature of the substituent.
Certain substituents increase the ease of reaction of benzene towards aromatic substitution.
If we look at the compounds closely, we will notice that toluene reacts readily with CH3Cl / AlCl3. This is because, the methyl group is electron donating hence it stabilizes the positively charged intermediate produced in the reaction.
Carbonyl compounds are electron withdrawing substituents hence they decrease the magnitude of the positive charge and hence decrease the rate of electrophilic aromatic substitution.
Which one of the following is an example of a balanced chemical reaction?
a. 8HCl + 2KMnO4 → 3Cl2 + 2MnO2 + 4H2O + 2KCl.
b. 6HCl + 2KMnO4 → 2Cl2 + 2MnO2 + 4H2O + 2KCl.
c. 2HCl + 2KMnO4 → Cl2 + MnO2 + 2H2O + 2KCl.
d. HCl + KMnO4 → Cl2 + MnO2 + H2O + KCl.
e. HCl + KMnO4 → Cl2 + MnO2 + 2H2O + KCl.
Answer:
Option a.
Explanation:
To determine which is a balanced chemical reaction, see the stoichiometry.
Stoichiometry coefficients are the numbers that appear before the compounds. These numbers indicate moles of substance.
Notice that the number of elements must be the same in both sides of the equation.
In this case, option a is the balanced chemical reaction.
8HCl + 2KMnO₄ → 3Cl₂ + 2MnO₂ + 4H₂O + 2KCl
8 moles of HCl react to 2 moles of potassium permanganate in order to produce 2 moles of magnessium dioxide, 3 moles of chlorine, 2 moles of potassium chloride and 4 moles of water.
8 H, 8 Cl, 2 K, 2 Mn and 8 O
54
Penny bought a club moss plant for her water garden. She needs to know how tall the plant will grow so she know
how much space it will need.
How tall will the plant likely grow?
O less than 5 centimeters because it is a seedless vascular plant
less than 5 centimeters because it is a nonvascular plant
O more than 5 centimeters because it is a seedless vascular plant
O more than 5 centimeters because it is a nonvascular plant
Answer:
less than 5 centimeters because it is a nonvascular plant
Explanation:
Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).
According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.
Answer:
d
Explanation:
Suppose 20.8 g of sodium iodide is dissolved in 250. mL of a 0.70 M aqueous solution of silver nitrate. Calculate the final molarity of ALL IONS in the solution. You can assume the volume of the solution doesn't change when the sodium iodide is dissolved in it. Round your answer to 3 significant digits.
Answer:
[Ag+] = [NO3-] = 0.700M
0.555M = [Na+] = [I-]
Explanation:
To solve this question we need to find the moles of sodium iodide, NaI, using its molar mass -. With the moles and the volume we can find the molarity of Na+ and I-. The molarity of the ions of silver nitrate, AgNO3 doesn't change because we are assuming the volume doesn't change:
Molarity Ag⁺ = Molarity NO₃⁻ = 0.700M
Moles NaI -Molar mass: 149.89g/mol-
20.8g NaI * (1mol/149.89g) = 0.0139 moles NaI
Molarity:
0.0139 moles NaI / 0.250L = 0.555M = [Na+] = [I-]
How many atoms are in 5.70 x 10^32 mol of Rn?
There are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.
What is atom?The basic number of matter that may be broken even without producing electrically charged molecules is the atom.
Calculation of atom:
It is given that number of mol = 5.70 x [tex]10^{32}[/tex] mol.
Then, the number of atom = 5.70 x [tex]10^{32}[/tex] mol × 6.02 × [tex]10^{23}[/tex].= 3.43 × [tex]10^{56}[/tex] atom.
Therefore, there are 3.43 × [tex]10^{56}[/tex] atom will be present in 5.70 x [tex]10^{32}[/tex] mol of Rn.
To know more about atom.
https://brainly.com/question/1566330
#SPJ3
A ball is thrown straight up into the air with a speed of 21 m/s. If the ball has a mass of 0.1 kg, how high does the ball go? Acceleration due to gravity is g = 9.8 m/s^2
Answer:
answer = 22.5m
Explanation:
using
[tex]s = \frac{ {v}^{2} - {4}^{2} }{2a} [/tex]
s= (0²-21²)/2(-9.8)
s= -441/19.6
s= 22.5m
do consider marking as Brainliest if this helped!!
Which 2 resonance forms destablize the carbocation intermediate if bezonitrile undergoes chlronation at the ortho or para positions
The question is incomplete, the complete question is shown in the image attached
Answer:
A and B
Explanation:
The electrophilic substitution of arenes yields a cation intermediate. The positive charge of the cation is delocalized over the entire ring.
The -CN group directs incoming electrophiles to the ortho/para position. The resonance structures for the chlorination of benzonitrile are shown in the question.
Recall that -CN is an electron withdrawing group. The resonance forms that destablize the carbocation intermediate are those in which the -CN group is directly attached to the carbon atom bearing the positive charge as in structures A and B.
How many ml of 0.24 M HBr solution are needed to react completely with 10.00 ml of 0.24 M Sr(OH)2 solution
Answer:
10mL
Explanation:
Using the formula as follows:
CaVa = CbVb
Where;
Ca = concentration of acid, HBr (M)
Cb = concentration of base, Sr(OH)2 (M)
Va = volume of acid, HBr (Litres)
Vb = volume of base, Sr(OH)2 (Litres)
According to the information given in this question;
Ca = 0.24M
Cb = 0.24M
Va = ?
Vb = 10.0ml
Using CaVa = CbVb
0.24 × Va = 0.24 × 10
0.24Va = 2.4
Va = 2.4 ÷ 0.24
Va = 10mL
10mL of HBr is needed.
If you could travel at the speed of light, how long would it take to travel from one side of the Milky Way galaxy to the other?
Answer:
It would take 200,000 years for a spaceship traveling at the speed of light to go across the entire galaxy.
Answer the following questions: (Questions about titration)
a. Why is it important to keep the NaOH solution covered at all times?
b. How will the molarity of NaOH solution be affected by its continued exposure to the atmosphere?
c. The pale pink color of the titration solution at the end point will fade to colorless after several minutes when exposed to the atmosphere. Account for this color change.
d. What volume (in mL) of 0.293 M Ba(OH)2 is required to neutralize 25.00 mL of 0.200M HNO3?
Answer:
Following are the solution to the given question:
Explanation:
For question a:
It is prevented that the atmospheric [tex]CO_2[/tex] through dissolving in the solution and make carbonic acid [tex](H_2CO_3)[/tex] which reacts with the [tex]NaOH:[/tex]
[tex]CO_2+ H_20\to H_2CO_3\\\\H_2CO_3 + NaOH \to NaHCO_3 +H_2O\\\\H_2CO_3 + 2 NaOH \to Na_2CO_3 + 2H_2O\\\\[/tex]
For question b:
For this, the [tex]NaOH[/tex] reacts with the dissolved [tex]CO_2[/tex] so, the molarity of the [tex]NaOH[/tex] will be decreased.
For question C:
In this, the Phenolphthalein is pink in the basic solution[tex](high \ pH)[/tex] and colorless throughout the acidic solution[tex](low\ pH)[/tex].
if the solution is exposed from the atmosphere, the [tex]CO_2[/tex] is from the air dissolving in the solution, and making the [tex]H_2CO_3[/tex] that gives the [tex]H^{+}\ ions[/tex]
[tex]\to[/tex] lower pH.
[tex]\to[/tex] colorless phenolphthalein
For question D:
[tex]Ba(OH)_2 + 2 HNO_3 \to Ba(NO_3)_2+ 2H_2O\\\\[/tex]
Calculating the moles of[tex]HNO_3 = volume \times \text{concentration of} HNO_3\\\\[/tex]
[tex]= \frac{25}{1000} \times 0.200\\\\= 0.005\ mol\\\\[/tex]
Calculating the moles of [tex]Ba(OH)_2= \frac{1}{2} \times\text{moles of}\ HNO_3\\\\[/tex]
[tex]=\frac{1}{2} \times 0.005\\\\= 0.0025 \ mol\\\\[/tex]
Calculating the volume of [tex]Ba(OH)_2=\frac{moles}{concentration\ of\ Ba(OH)_2}[/tex]
[tex]=\frac{0.0025}{0.0293}\\\\=0.08532\ L\\\\= 85.32 \ mL\\\\= 85.3\ mL[/tex]
In the titration of 82.0 mL of 0.400 M HCOOH with 0.150 M LiOH, how many mL of LiOH are required to reach the equivalence point
Answer:
218.7 mL
Explanation:
The reaction that takes place is:
HCOOH + LiOH → LiCOOH + H₂OFirst we calculate how many HCOOH moles reacted, using the given volume and concentration:
82.0 mL * 0.400 M = 32.8 mmol HCOOHAs 1 HCOOH mol reacts with 1 LiOH mol, 32.8 mmoles of LiOH are needed to react with 32.8 mmoles of HCOOH.
Finally we calculate how many mL of a 0.150 M solution would contain 32.8 mmoles:
32.8 mmol / 0.150 M = 218.7 mLEXTRACTION OF CAFFEINE 1.Explain the reason each step of the separation is performed with three portions of the solvent rather than with a single portion of solvent. (e.g. Done in triplicate.) (0.5 pt) 2.Why should a separatory funnel not be vigorously shaken
Answer:
Throughout the explanations section below you will find a description of the question.
Explanation:
(1)
Whether a solution would be positioned inside a separative funnel, combined water, as well as solvent, disintegrate particulate caffeine. In every stage, the caffeine content incorporated relies upon the coefficient of caffeine partitioning throughout the combination of water as well as fluid.Thus, increasingly caffeine is taken from the solvent whenever the moment you bring additional solvent. Consequently, we separate the solvent from the single component.(2)
For compounds to be mixed thoroughly and separated into different layers, a shuddering mixture within the dividing funnel would be essential.However, it vibrates the separation funnel forcefully, restricts airflow within the funnel, which can also induce the fluid under it to burst or causing fluid to fire.Calculate the mass of butane needed to produce 80.0g of carbon dioxide
Answer:
Multiply the number of moles of butane by its molar mass, 58.12g/mol, to produce the mass of butane. Mass of butane = 18.8g.
The length of a covalent bond depends upon the size of the atoms and the bond order.
a. True
b. False
Answer:
True
Explanation:
The length of covalent bond depends upon the size of atoms and the bond order.
A vessel is filled at a rate of 3.41 cubic micrometers per minute. If the vessel has a volume of 54 liters, how many
seconds will it take to fill the vessel? provide a step buy step explanation.
Answer:
9.5x10¹⁷ s
Explanation:
First we convert 3.41 cubic micrometers (um³) to liters (L), as such:
3.41 um³ * [tex](\frac{1m}{10^6um} )^3*\frac{1000L}{1m^3}[/tex] = 3.41x10⁻¹⁵ LWith the converted rate of 3.41x10⁻¹⁵ L/min, we can calculate how many minutes it would take to fill a 54 L vessel:
54 L ÷ 3.41x10⁻¹⁵ L/min = 1.58x10¹⁶ minFinally we convert 1.58x10¹⁶ minutes to seconds:
1.58x10¹⁶ * 60 = 9.5x10¹⁷ sIdentify the intermolecular attractions for dimethyl ether and for ethyl alcohol. Which molecule is expected to be more soluble in water? Explain.
Answer:
See explanation
Explanation:
All molecules possess the London dispersion forces. However London dispersion forces is the only kind of intermolecular interaction that exists in nonpolar substances.
So, the only kind of intermolecular interaction that exists in dimethyl ether is London dispersion forces.
As for ethyl alcohol, the molecule is polar due to the presence of polar O-H bond. In addition to London dispersion forces, dipole-dipole interactions and specifically hydrogen bonding also occurs between the molecules.
Because ethyl alcohol is polar, it is more soluble in water than dimethyl ether.
What is the percent yield of the reaction below if 84.0 grams of Al2O3(s) is recovered from a reaction whose theoretical yield of Al2O3(s) is 104 grams?
4 Al(s) + 3 O2(g) → 2 Al2O3(s)
Answer:
80.8%
Explanation:
Let's consider the following balanced equation.
4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
The mass obtained of Al₂O₃ (experimental yield) is 84.0 g. The theoretical yield of Al₂O₃ is 104 g. We can calculate the percent yield of Al₂O₃ using the following expression.
%yield = (experimental yield / theoretical yield) × 100%
%yield = (84.0 g / 104 g) × 100% = 80.8%
Answer:
Percent Yield = 80.8%
Explanation:
We can find the percent yield of a reaction using the equation:
Percent yield = Actual yield (g) / Theoretical Yield (g) * 100
Where Actual yield is the amount of product produced (84.0g)
And theoretical yield is the mass produced assuming a 100% of product (104.0g)
Replacing the computed values:
Percent yield = 84.0g / 104.0g * 100
Percent Yield = 80.8%
Which of the following describes an organisms habitat?
A) where the organism lives
B) how the organism moves
C) what the organism eats
D) what eats the organism
Answer:
A) habitat
Explanation:
a habitat is essentially the organisms "home". also known as a "niche"
The density of aluminum is 2.7 g/cm3.
Part A
What is its density in kilograms per cubic meter?
Express your answer in kilograms per cubic meter to two significant figures.
Answer:
2700 kg/m³
Explanation:
First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:
2.7 g/cm³ * [tex]\frac{1kg}{1000g}[/tex] = 0.0027 kg/cm³Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:
0.0027 kg/cm³ * [tex](\frac{100cm}{1m} )^3[/tex] = 2700 kg/m³The answer is 2700 kg/m³.
write any two things that should be remembered while writing chemical equation
Answer:
the product and the reactant must be balanced
if u are required to give the mechanism if the reaction it must be written