pls help ive been stuck on this question for a while im not good with chemistry lol.

Answer:

2

Explanation:

The number of carbon atoms that are sp²-hybridized in this alkene is 2

Because all the single bonded carbon atoms in the alkene are  sp²-hybridized

There are three(3) single formed via sp² orbitals and one ( 1 ) PI bond formed via Pure-P-orbital

attached below is the some part of the solution

The equation for the energy required to melt 2 kg of gold is 3440 kJ.

Energy is the ability to do work or cause change. It is an essential part of everyday life and is present in many forms, such as thermal energy, electrical energy, chemical energy, and mechanical energy. Energy can be converted from one form to another in order to do work.

The equation for calculating the energy required to melt a certain mass of material is Q = m x Lf, where Q is the energy required (in joules), m is the mass of the material (in kilograms), and Lf is the latent heat of fusion (in joules per kilogram).
Using the table below, we can see that the latent heat of fusion for gold is 1760 kJ/kg. Therefore, the equation for the energy required to melt 2 kg of gold is: Q = 2 kg x 1760 kJ/kg = 3440 kJ.

To learn more about energy
https://brainly.com/question/19666326
#SPJ1

The question is incomplete, the complete question is;

It takes 412. KJ/mol to break a carbon-hydrogen single bond. Calculate the maximum wavelength of light for which a carbon-hydrogen single bond could be broken by absorbing a single photon. Round your answer to significant digits.

Answer:

289 nm

Explanation:

The energy of the photon = 412 × 10^3/6.02 × 10^23 = 6.84 × 10^-19 J

From;

E = hc/λ

h= Plank's constant

c= speed of light

λ = wavelength

λ = hc/E

λ = 6.6 × 10^-34 × 3 × 10^8/6.84 × 10^-19

λ = 2.89 × 10^-7 m

λ = 289 nm

Answer:

1. Its formation requires very strong updrafts = a. Hail

2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain

3. Precipitation from cumuliform clouds is typically of this nature = c. Shower

4. Precipitation from stratus clouds is typically of this nature = Drizzle

Explanation:

Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.

Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.

Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.

Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.

Answer:

0.203 is the mean of the concentration of the HCl solution

Explanation:

You have 5 concentrations. The most appropiate result is the mean of those results. The mean is a statistical defined as the sum of each result divided by the total amount of results. For the results of the problem, the mean is:

0.210 + 0.204 + 0.201 + 0.202 + 0.197 = 1.014 / 5 =

Answer:

See explanation and image attached

Explanation:

Let us recall that the reaction in question is expected to happen by SN2 mechanism. This is because, the reaction occurs at secondary carbon atom and the attacking nucleophile (N3^-) is a good nucleophile.

The reaction occurs via a backside attack of the N3^- ion on (R)-2-chloropentane. This backside attack leads to inversion of configuration at the reaction centre to yield (S)-CH3CH(N3)CH2CH2CH3.

The images of the alkyl halide and nucleophile are shown in the image attached to this answer.

Answer:

0.350 L

Explanation:

First we convert 2.18 g of Na₂O₂ into moles, using its molar mass:

Then we convert 0.0279 moles of Na₂O₂ into moles of O₂, using the stoichiometric coefficients of the reaction:

Finally we use the PV=nRT formula to calculate the volume of oxygen produced:

Inputting the data:

This is an acronym of the word Systeme International in French. Its International System of Units (SI) is a metric system that would be universally acknowledged as a measurement standard, and the further discussion can be defined as follows:

Conversion [tex]^{\circ} \ to \ K[/tex]:

let,

[tex]\to 0^{\circ}\ C + 273.15 = 273.15\ K\\\\[/tex]

So,

[tex]\to -35.903+273.15=237.247\ K[/tex]

Therefore, the final answer is "237.247".

Learn more:

brainly.com/question/13347763

Answer:

8 oxygen. 9 flourine. 10. Neon. 5 Boron

Answer:

Qp > Kp, por lo tanto, la presión parcial de BrF₃(g) aumenta hasta alcanzar el equilibrio.

Explanation:

Paso 1: Escribir la ecuación balanceada

BrF₃ (g) ⇌ BrF(g) + F₂(g)      Kp(T) = 64,0

Paso 2: Calcular el cociente de reacción (Qp)

Qp = pBrF × pF₂ / pBrF₃

Qp = 1,50 × 2,00 / 0,0150 = 200

Paso 3: Sacar una conclusión

Dado que Qp > Kp, la reacción se desplazará hacia la izquierda para alcanzar el equilibrio, es decir, la presión parcial de BrF₃(g) aumenta hasta alcanzar el equilibrio.

Answer:

1.5L of NaNO3 must be present

Explanation:

That contains 200g of sodium nitrate. Round to 2 significant digits

To solve this question we need to convert the mass of NaNO3 to moles using its molar mass (85g/mol). With the moles and the molar concentration we can find the volume in liters of the solution:

Moles NaNO3:

200g * (1mol / 85g) = 2.353 moles NaNO3

Volume:

2.353 moles NaNO3 * (1L / 1.60moles) =

Acids have sour taste, low pH and dissolves metals.

The list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

An acid is a chemical substance that has the ability to donate hydrogen ions when involved in a chemical reaction.

The following are the characteristics or features of an acid:

Therefore, the list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

Learn more about acids here:

https://brainly.com/question/1302816

Answer:

a. the proportion of elements to compounds is constant.

Answer:

A. P₂ / P₁ = 2

B. P₂ / P₁ = 1.1

Explanation:

A. Determination of the ratio P₂/P₁

Volume = constant

Initial temperature (T₁) = 46 K

Final temperature (T₂) = 92 K

Final pressure /Initial pressure (P₂/P₁) =?

P₁/T₁ = P₂/T₂

P₁/46 = P₂/92

Cross multiply

46 × P₂ = P₁ × 92

Divide both side by P₁

46 × P₂ / P₁ = 92

Divide both side by 46

P₂ / P₁ = 92 / 46

P₂ / P₁ = 2

B. Determination of the ratio P₂/P₁

Volume = constant

Initial temperature (T₁) = 35.4 °C = 35.4 + 273 = 308.4 K

Final temperature (T₂) = 69.0 °C = 69 + 273 = 342 K

Final pressure /Initial pressure (P₂/P₁) =?

P₁/T₁ = P₂/T₂

P₁/308.4 = P₂/342

Cross multiply

308.4 × P₂ = P₁ × 342

Divide both side by P₁

308.4 × P₂ / P₁ = 342

Divide both side by 308.4

P₂ / P₁ = 342 / 308.4

P₂ / P₁ = 1.1

Answer:

2.07459

Explanation:

this is the correct answer.

Answer:

a

Explanation:

documentary is best researcher!.

Answer:

55.44L of the 0.17M NaOH are required

Explanation:

Phosphoric acid, H3PO4, reacts with NaOH as follows:

H3PO4 + 3NaOH → Na3PO4 + 3H2O

Where 1 mole of H3PO4 reacts with 3 moles of NaOH

To solve this question we need to find the moles of H3PO4 in the aliquot. Using the balanced equation we can find the moles of NaOH and its volume with the concentration (0.17M) as follows:

Moles H3PO4:

15.4mL = 0.0154L * (0.204mol/L) = 0.00314 moles H3PO4

Moles NaOH:

0.00314 moles H3PO4 * (3mol NaOH / 1mol H3PO4) = 0.009425moles NaOH

Volume NaOH:

0.009425moles NaOH * (1L/0.17moles NaOH) = 0.05544L 0.17M NaOH =

Answer:

Towards the big bully

Explanation:

If a big bully and a small child are involved in a thug of war, it is clear that the bully is stronger than the child and he/she will pull the rope used in the thug of war with a greater force.

By so doing, the ball attached at the centre of the rope will naturally be drawn towards the stronger bully.

Answer:

Each electrode attracts ions that are of the opposite charge. Positively charged ions, or cations, move toward the electron-providing cathode, which is negative; negatively charged ions, or anions, move toward the positive anode.

Answer:

The wavelength of a microwave is LONGER than the wavelength if visible light.

Answer:

1.44 × 10⁻⁶

Explanation:

Step 1: Given data

Step 2: Calculate the concentration of H⁺ ions

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -2.88 = 1.32 × 10⁻³ M

Step 3: Calculate the acid dissociation constant of the acid (Ka)

For a weak monoprotic acid, we will use the following expression.

Ka = [H⁺]²/Ca

Ka = (1.32 × 10⁻³)²/1.21 = 1.44 × 10⁻⁶

Answer:

isn't it 0.998

Explanation:

cause 0.998 is in the same grams / mole. I don't get

A calorimeter has been filled with 75 mL of water. The number of grams of water is 74.85 grams.

A calorimeter is an instrument that is used to measure calorimetry. It is used to measure the heat of chemical reactions and physical and chemical changes.

Mass is the quantity of matter in a physical body. Volume is the space occupied by a three-dimensional object. Mass is the quantity of matter in a physical body. The product of the compound's molar mass and the substance's moles are defined as mass.

Given, that the volume of the water is 75 mL

The temperature of the water is 25 °C

The density of water is 0.998 g/mL

To calculate the mass, the volume is multiplied by density.

Mass = volume x density

putting the values in the formula

75 x  0.998 = 74.85 grams

Thus, the grams of water that have at 25°C is 74.85 grams.

To learn more about density, refer to the link:

https://brainly.com/question/26304205

#SPJ2

Answer:

a) The mechanism of the reaction is the Elimination Bimolecular or E2.

b) Steps for the mechanism of this reaction is given as follows,

c) Reaction rate = K[Organic compound][[tex]NaoCH_{2} CH_{3}[/tex]].  

Explanation:

a) The mechanism of the reaction is the Elimination Bimolecular or E2.

c) This is an E2 reaction, so it depends on the concentration of both substrate and reactant. If we increase the concentration of [tex]NaoCH_{2} CH_{3}[/tex], the reaction rate will be increased.

Reaction rate = K[Organic compound][[tex]NaoCH_{2} CH_{3}[/tex]].  

b) Steps for the mechanism of this reaction is given as follows,

Answer:

a hydrogen bond between the hydrogen of water and the nitrogen of the amine

a hydrogen bond between the oxygen of water and a hydrogen from the -NH2 group

Explanation:

A hydrogen bond is formed between molecules in which hydrogen is bonded to a highly electronegative element.

In amines, hydrogen is bonded to nitrogen while in water, hydrogen is bonded to oxygen. Both are highly electronegative elements hence hydrogen bonding is possible between amines and water.

This hydrogen bond may involve;

The hydrogen of water and the nitrogen of the amine

Or

The oxygen of water and a hydrogen from the -NH2 group

Answer:

Explanation:

The reaction is

H3Po4+3NH3\to→ (NH4)3PO4

Given,7.10g NH3=7.10g/molar mass of NH3

=7.10g/(17.031g/mol)

=0.416mol

From the reaction

3 mol ammonia reacted and produced 1 mole of ammoniam phosphate

So,One mole ammonia reacted and produced 1/ 3 mole ammonium phosphate.

And Also,0.416 mole ammonium reacted and produced (1/3)0.416=0.138 mole ammonium phosphate.

Hence 0.138mole=0.138mole*149.08 g/mole

               =20.573gm ammonium phosphate produced.

Hence 20.573g of ammonium phosphate is produced by the reaction of 7.10 g of ammonia.

Answer:

E = 8085 kJ

Explanation:

Given that,

The mass of a truck, m = 1500 kg

Height, h = 550 m

We need to find the gravitational potential energy of the truck. It can be calculated as follows :

[tex]E=mgh[/tex]

Put all the values,

[tex]E=1500\times 9.8\times 550\\\\E=8085000\ J\\\\or\\\\E=8085\ kJ[/tex]

So, the gravitational potential energy is 8085 kJ.

Answer:

Explanation:

BrCl₃ is an interhalogen compound with a hybridization of sp³d. The approximate bond angles can be predicted from the structure (attached below). Although, the lewis structure might be predicted to be trigonal bipyramidal from the structure, it is however a T-shaped geometry because of it's two lone pairs.

Also, from the structure attached, it can be predicted that the approximate bond angles about the central atom is 120° (360 ÷ 3) since each of the three chlorine atoms is equally spaced about the central atom.

The Lewis structure for BrCl₃ is attached to the image below. The bond angles around the central atom, bromine (Br), are 90 degrees between the bromine and each chlorine atom. Therefore, option B is correct.

A Lewis structure, also known as an electron-dot structure or Lewis dot structure is a diagram that represents the valence electrons of an atom or molecule.

Bromine (Br) is in Group 7A and has 7 valence electrons, while each chlorine (Cl) atom in Group 7A also has 7 valence electrons.

Br: 1 atom × 7 valence electrons = 7 valence electrons

Cl: 3 atoms × 7 valence electrons = 21 valence electrons

Total valence electrons = 7 + 21 = 28

To learn more about the bond angle, follow the link:

https://brainly.com/question/31324226

#SPJ6

Answer: the answer is A

Explanation: add me hope i helped

Answer:

whether or not they have a common origin

Explanation:

During the scientific investigation of a crime, a forensic scientist might be required to perform a comparison analysis. A comparison analysis is an examination where specific physical properties are obtained from a suspect specimen and a standard which are then compared to identify their common origin. This type of analysis is important for it helps in narrowing down the crime to a particular person. It also enables accurate delivery of justice.