PLEASEEEEE HELP MEEEE
The members of a school basketball team went bowling for a season ending party. They made this scatter plot to compare their free throw percents for the season and their average bowling score for 3 games.
Part A:
What ordered pair represents the student with the highest free throw percent? Explain the meaning of each coordinate in the ordered pair.
Part B:
What ordered pair represents the student with the highest bowling average? Explain the meaning of each coordinate in the ordered pair.
Part C:
Is the association between free throw percent and bowling average linear or nonlinear? If it is linear, is the relationship positive, negative, or neither? State the association, if any, in terms of the variables.

The surface area of the composite figure is calculated to be 3719 square feets.

area of one identical triangle = 1/2 × 27ft × 10ft = 135ft²

area of two identical triangle = 270ft²

area of one top identical rectangle face = 27ft × 17ft = 493ft²

area of one top identical rectangle face = 986ft²

area of one bigger identical side rectangle = 29ft × 15ft = 435ft²

area of two bigger identical side rectangle = 870ft²

area of one smaller identical side rectangle = 27ft × 15ft = 405ft²

area of two smaller identical side rectangle = 810ft²

area of bottom rectangle = 28ft × 27ft = 783ft²

surface area of the figure = 270ft² + 986ft² + 870ft² + 810ft² + 783ft²

surface area of the figure = 3719ft².

Therefore, the surface area of the composite figure is calculated to be 3719 square feets.

Read more about surface area here:https://brainly.com/question/12506372

#SPJ1

The Poisson distribution provides a useful tool for analyzing the frequency of hits on each sector and understanding the targeting process.

The Poisson distribution is a good model for situations where events occur randomly and independently over time or space, and the events are rare. In this case, the number of hits on each sector could be considered a rare event, as it is unlikely for a sector to be hit multiple times in a short period of time. Therefore, we might expect a Poisson distribution to be a good model for the number of hits on each sector. To fit a Poisson distribution to the data, we can calculate the average number of hits per sector, which is the parameter λ for the Poisson distribution. Then, we can use this λ to compute the theoretical frequencies of 0, 1, 2, 3, 4, and 5 hits in 576 sectors. Based on the results of the Poisson distribution, we can say that the targeting process is somewhat random, as the actual frequencies of hits on each sector closely match the theoretical frequencies predicted by the Poisson distribution. However, there may be some factors that influence the targeting process, as the actual frequencies of hits do not match the theoretical frequencies perfectly.

Learn more about Poisson distribution here

https://brainly.com/question/9123296

#SPJ11

To verify that all sales that have been shipped to customers have been recorded, a test of transactions should be completed on a representative sample drawn from the sales records or shipping records.

The sample should be chosen randomly and be large enough to provide a reasonable level of confidence in the accuracy of the recorded transactions. This test will help ensure that all sales have been properly recorded in the accounting system and that there are no unrecorded sales. It is important to perform this test on a regular basis to maintain the integrity of the financial records.

More on transactions test: https://brainly.com/question/15392308

#SPJ11

This means that we can be 95% confident that the true population means difference lies between 1.7075 and 10.2925.

Confidence interval = Mean difference ± (t-value × standard error)

Substituting the given values into the formula, we get:

Confidence interval = 6 ± (2.045 × 2.1)

Confidence interval = 6 ± 4.2925

A confidence interval is a statistical concept used to estimate the range of values in which a population parameter is likely to fall. It is calculated using sample data and is used to provide an estimate of the true population parameter.

The confidence interval is a range of values that is constructed around a point estimate, such as the sample mean or proportion. This range is based on the level of confidence chosen by the researcher, typically 90%, 95%, or 99%. For example, a 95% confidence interval means that if we were to repeat the sampling process many times, we would expect the true population parameter to fall within the range of values calculated for 95% of those samples.

To learn more about Confidence intervals visit here:

brainly.com/question/24131141

#SPJ4

The graph of the inequality is graph B.

The graph of inequality can be a dashed line or a solid line which shows the part of the number line that contains the values on the graph that will satisfy the inequality.

Given that:

y - 5 > 2x - 10

Let's first move all the terms that do not have y to the other side of the equation. So,

y > 2x - 10 + 5

y > 2x - 5

Using the slope intercept form y = mx + b, where:

Thus,

Since the inequality sign is greater than(>), then the straight line will be a dashed straight line, and we will then shade the area above the boundary line.

Learn more about graphing inequalities here:

https://brainly.com/question/24372553

#SPJ1

The dimensions of the rectangular box are height = 7 ft, width = 28 ft, and length = 112 ft.

Let the height of the box be h. Then, the width is 4h, and the length is 16h. We know that the volume of the box is 343 ft³, so we can set up the equation: V = l*w*h = (16h)(4h)(h) = 64h³

64h³ = 343

h³ = 343/64 = 27/4

h = (27/4)^(1/3) = 3/2

So the height of the box is 3/2 ft. Using this value, we can find the width and length:

Width = 4h = 4(3/2) = 6 ft

Length = 16h = 16(3/2) = 24 ft

Therefore, the dimensions of the rectangular box are height = 7 ft, width = 28 ft, and length = 112 ft.

To know more about volume , refer here:

https://brainly.com/question/28338582?referrer=searchResults

#SPJ11

Queueing system can be analyzed using queueing theory to determine performance measures such as the average queue length, average waiting time, and utilization of the service channels.

The queueing system you have described can be modeled as an M/M/7 queue, where:

M represents that inter-arrival times and service times are exponentially distributed.

M represents that the arrival process is memoryless, meaning that the probability of a customer arriving at any given time does not depend on the previous arrival times or the state of the system.

7 represents the number of service channels, or lanes, available for customers to pay their toll.

The notation for this system is M/M/7, which indicates that it has an infinite queue capacity and that there is no limit to the number of customers that can be waiting in the queue.

In this queueing system, customers arrive randomly and independently, and they join the queue if all lanes are busy. They are served on a first-come, first-served basis, with the service times also being exponentially distributed.

This queueing system can be analyzed using queueing theory to determine performance measures such as the average queue length, average waiting time, and utilization of the service channels.

for such more question on Queueing system

https://brainly.com/question/16332322

#SPJ11

The critical value in a chi-square test for independence depends on the number of categories and expected frequencies, and not on the normality or variance of the data.

The critical value in a chi-square test for independence is determined by the number of categories and expected frequencies in the data. This test is used to analyze the relationship between two categorical variables, and the expected frequencies are calculated based on the assumption of independence between these variables. The critical value is the minimum value of the test statistic that would result in rejecting the null hypothesis, which states that the two variables are independent.

The normality and variance of the data do not affect the critical value in a chi-square test for independence. This test does not assume a normal distribution of the data, and the variance is not used to calculate the expected frequencies. Instead, the expected frequencies are determined by the marginal frequencies of the two variables, assuming that they are independent.

It is important to use the correct critical value in a chi-square test for independence, as using the wrong value could result in incorrect conclusions about the relationship between the two variables. The critical value can be found using a chi-square distribution table or calculator, based on the number of categories and the level of significance chosen for the test.

Know more about critical value here:

https://brainly.com/question/30168469

#SPJ11

We can say with 95% confidence that the true mean amount that women in the population spend dining out per week lies within the range of $91.74 to $108.26.

Based on the given information, we can calculate a 95% confidence interval for the mean amount that women in the population spend dining out per week. With a sample size of 25 and a standard error of $4, we can use the formula:

95% CI = sample mean +/- (critical value x standard error)

To find the critical value, we need to look up the t-distribution with degrees of freedom (df) = n-1 = 24 and a significance level of alpha = 0.05/2 = 0.025 (since we are interested in a two-tailed test). From a t-table or calculator, we find that the critical t-value is approximately 2.064.

Plugging in the values, we get:

95% CI = $100 +/- (2.064 x $4)
95% CI = $100 +/- $8.26
95% CI = ($91.74, $108.26)

Therefore, we can say with 95% confidence that the true mean amount that women in the population spend dining out per week lies within the range of $91.74 to $108.26. This means that if we were to repeatedly take random samples of 25 women and calculate their mean amount spent dining out, about 95% of the intervals we construct using this method would contain the true population mean.

To learn more about mean, refer here:

https://brainly.com/question/31101410#

#SPJ11

The exact value of f(pi) is 0 since when the point on the unit circle has traveled pi distance from its starting point (1,0), it will be at the same height as the starting point.

Let us consider a point on a unit circle centered at (0,0), starting at the point (1,0) and moving around the circle for a distance d. As the point moves around the circle, its height, h, above the x-axis will vary. To find the exact value of f(pi), we need to determine the height of the point when it has traveled a distance of pi around the circle.

When the point has traveled half the distance around the circle, i.e., pi/2, it will be at the point (-1,0), and its height will be 0 since it is on the x-axis. As the point continues to move around the circle, its height will increase until it reaches its maximum height at the point (0,1), where its height is 1.

As the point continues to move around the circle, its height will decrease until it reaches point (1,0), where its height is again 0. Therefore, f(pi) is equal to the height of the point when it has traveled a distance of pi around the circle, which is equal to the height of the point when it is at the point (1,0). Thus, f(pi) = 0.

To learn more about starting point

https://brainly.com/question/28691544

#SPJ4

The people do you have to sample size to be 95% certain you can identify a difference of 1% is 9604.

A minimum sample size is the number of participants required to provide findings that accurately reflect the community under investigation while yet maintaining the intended confidence interval (margin of error) and confidence level.

The process of deciding how many observations or replicates to include in a statistical sample is known as sample size determination. Any empirical study with the aim of drawing conclusions about a population from a sample must take into account the sample size as a crucial component.

As we are given here a margin of error of 0.01. Also from standard normal tables, we have here:

P(-1.96 < Z < 1.96) = 0.95

Therefore 1.96 is the z critical value that is to be used here.

As we are not given a prior proportion value here, we take p = 0.5, to get a conservative value of the sample size.

The margin of error now is computed as:

MOE = x*P(1 - p)

n = 22 P(1-7 .)2 x 0.25 = 9604 MOE2

Therefore 9604 is the required minimum sample size here.

Learn more about Sample size:

https://brainly.com/question/29766751

#SPJ4

Answer:

x=-2.5(ERROR)

Step-by-step explanation:

An isosceles triangle is a triangle with two sides of equal length, called legs. The third side of the triangle is called the base. The vertex angle is the angle between the legs 1.

Since triangle ABC is an isosceles triangle with vertex angle B, we know that AB = AC.

Therefore, we can set up an equation:

20x - 2 = 25x

Solving for x:

20x - 25x = 2

-5x = 2

x = -2/5

Since x cannot be negative, there must be an error in the problem statement.

I hope this helps!

Therefore, The number of different slates of officers that can be elected is 5,040. This is calculated using the permutation formula with 7 positions to fill and 7 members who can be elected to each position.

To find the number of different slates of officers that can be elected, we need to use the permutation formula. The formula for permutations is n!/(n-r)!, where n is the total number of items and r is the number of items selected. In this case, we have 7 positions to fill and 7 members who can be elected to each position. Therefore, the number of different slates of officers that can be elected is 7!/(7-7)! = 7! = 5,040.
There are seven positions that need to be filled including president, vice president, recording secretary, corresponding secretary, treasurer, historian, and statistician. Each member can be elected to any position and can only hold one position. To find the number of different slates of officers that can be elected, we use the permutation formula. We have 7 positions to fill and 7 members who can be elected to each position, so the number of different slates of officers that can be elected is 7!/(7-7)! = 7! = 5,040.

Therefore, The number of different slates of officers that can be elected is 5,040. This is calculated using the permutation formula with 7 positions to fill and 7 members who can be elected to each position.

To know more about multiplication visit:

https://brainly.com/question/1135170

#SPJ11

If a relationship exists between a response variable Y and a predictor variable X, it is appropriate to say that X causes variation in Y is True.

There could be other factors or variables that influence the relationship between X and Y. It is important to distinguish between correlation and causation.
To establish causation, a researcher needs to conduct a controlled experiment, where all other factors are held constant except for the predictor variable X.

This will allow the researcher to isolate the effect of X on Y and determine whether it is indeed causing variation in Y.
In conclusion, while a relationship between X and Y may suggest causation, it is not appropriate to make that assumption without conducting a controlled experiment or considering other factors that may be influencing the relationship.
True. If a relationship exists between a response variable Y and a predictor variable X, it is appropriate to say that X causes variation in Y.
In statistics, response variables, also known as dependent variables, are the outcomes we are interested in explaining or predicting.

Predictor variables, also called independent variables, are the factors that might influence these outcomes.

When analyzing data, we often use regression models to determine the strength and direction of the relationship between the response variable Y and the predictor variable X.
A positive relationship between X and Y means that as X increases, Y also increases, while a negative relationship implies that as X increases, Y decreases.

A strong relationship between the variables indicates that the predictor variable X accounts for a significant portion of the variation in the response variable Y.
However,

It's crucial to note that a correlation between X and Y does not guarantee causality.

Confounding variables, which are factors not included in the analysis but may influence the response variable, could be causing the observed relationship.

Further analysis,

Such as experiments or controlling for potential confounding variables, might be needed to establish causation.
In summary,

When a relationship exists between a response variable Y and a predictor variable X, it is appropriate to say that X causes variation in Y, but it's important to consider that correlation does not necessarily mean causation.

For similar question on variation:

https://brainly.com/question/14254277

#SPJ11

Answer:

Jan is not correct.

Every rhombus is a parallelogram, but not every parallelogram is a rhombus.

Over 20 years, the truck driver would earn more than the bank teller, with a total income of $700,166.40 compared to $468,000 for the bank teller.

We have,

To compare the incomes of a truck driver and a bank teller over 20 years, we need to first convert their incomes to a comparable time period.

Assuming that they work for the same number of weeks in a year, we can use the following conversions:

Truck driver:

$35,000 per year = $673.08 per week

Bank teller:

$450 per week = $23,400 per year

Now, if we assume that their incomes remain constant over the 20-year period, we can calculate their total incomes as follows:

Truck driver:

= $673.08 per week x 52 weeks per year x 20 years

= $700,166.40

Bank teller:

= $450 per week x 52 weeks per year x 20 years

= $468,000

Therefore,

Over 20 years, the truck driver would earn more than the bank teller, with a total income of $700,166.40 compared to $468,000 for the bank teller.

Learn more about Income here:

https://brainly.com/question/17961582

#SPJ1

Answer: 75

Step-by-step explanation:

To find the sum of these numbers, we simply add them together:

15 + 28 + 12 + 20 = 75

Therefore, the sum of 15, 28, 12, and 20 is 75.

We get x = 59. Therefore, your TA should apply to 59 schools to have a greater than 95% chance of being admitted to at least one school.

To calculate the number of different schools your TA needs to apply to in order to have a certain chance of being admitted to at least one school, we can use the formula:

n = log(1 - p) / log(1 - q)

Where n is the number of schools, p is the desired probability of being admitted to at least one school (i.e. 0.9 or 0.95), and q is the probability of not being admitted to any one school (i.e. 0.95).

Using this formula with p = 0.9 and q = 0.95, we get:

n = log(1 - 0.9) / log(1 - 0.05)
n ≈ 14

So your TA would need to apply to at least 14 different schools to have a chance of being admitted to at least one school above 90%.

Using the same formula with p = 0.95 and q = 0.95, we get:

n = log(1 - 0.95) / log(1 - 0.05)
n ≈ 29

So your TA would need to apply to at least 29 different schools to have a chance of being admitted to at least one school above 95%.
To determine the number of schools your TA needs to apply to in order to have at least a 90% and 95% chance of being admitted to at least one school, we'll use the concept of complementary probability.

Step 1: Calculate the probability of NOT being admitted to any school
The probability of not being admitted to a single school is 95% (100% - 5%).

Step 2: Use complementary probability to find the required probability
Let x be the number of schools your TA needs to apply to. The probability of not being admitted to any of the x schools is (0.95)^x.

Step 3: Find the number of schools for a 90% chance
We want the probability of being admitted to at least one school to be above 90%. Therefore, we want the complementary probability to be less than 10% (100% - 90%):
(0.95)^x < 0.10

Solving for x, we get x = 45. Therefore, your TA should apply to 45 schools to have a greater than 90% chance of being admitted to at least one school.

Step 4: Find the number of schools for a 95% chance
Similarly, for a 95% chance, we want the complementary probability to be less than 5% (100% - 95%):
(0.95)^x < 0.05

Solving for x, we get x = 59. Therefore, your TA should apply to 59 schools to have a greater than 95% chance of being admitted to at least one school.

Learn more about probability at: brainly.com/question/30034780

#SPJ11

In the original Milgram experiment, only men participated, and the study aimed to investigate their obedience to authority figures. Later, a version of the experiment was conducted with only women participants to compare their obedience levels to men's.

In the replication of the Milgram experiment with only women participants, the level of obedience was found to be similar to that of the original experiment with only men. In fact, the results showed that women were just as likely as men to obey authority figures and administer the maximum level of electric shocks to the supposed "learner" in the experiment. This suggests that obedience to authority is not gender-specific and that both men and women can be equally susceptible to obeying orders, even when they conflict with their own moral beliefs.

To answer your question, women's obedience in the Milgram experiment was found to be similar to men's obedience. Both genders displayed high levels of obedience to the authority figure, even when instructed to administer painful electric shocks to the "learner." This result suggests that obedience to authority is not solely dependent on gender but is rather a widespread human tendency.

Learn more about Milgram experiment at: brainly.com/question/30950092

#SPJ11

An important application of the chi-square distribution is testing for goodness of fit and testing for the independence of two variables The correct answer is c. both of the above.

The chi-square distribution is a probability distribution that is used in statistics for hypothesis testing and confidence interval estimation. Two important applications of the chi-square distribution are testing for goodness of fit and testing for the independence of two variables.

Testing for goodness of fit involves comparing observed data to expected data, and determining whether the differences between the observed and expected data are statistically significant. The chi-square distribution is used to calculate a test statistic, which measures the degree of divergence between the observed and expected data.

Testing for the independence of two variables involves examining whether there is a relationship between two categorical variables. The chi-square distribution is used to calculate a test statistic that measures the degree of dependence or independence between the two variables. If the test statistic is large enough, it indicates that there is a significant relationship between the two variables.

for such more question on chi-square distribution

https://brainly.com/question/17142834

#SPJ11

To leave the radiator filled with a 55% antifreeze solution, 3 liters of the 25% solution of antifreeze must be removed and replaced with 3 liters of a 75% antifreeze solution.

We start by calculating the amount of antifreeze in the initial solution. Since the solution is 25% antifreeze, the amount of antifreeze in the solution is 25% of 5 liters, or 1.25 liters.

Let x be the amount of 75% antifreeze solution that must be added. We can set up the equation for the amount of antifreeze in the final solution as follows:

1.25 - 0.25(3) + 0.75x = 0.55(5)

Simplifying and solving for x, we get:

x = 3

Therefore, 3 liters of the 25% antifreeze solution must be removed from the radiator and replaced with 3 liters of the 75% antifreeze solution to leave the radiator filled with a 55% antifreeze solution.

To know more about initial solution, refer here:

https://brainly.com/question/18650706#

#SPJ11

The surface area of the cylinder, given the diameter, can be found to be 18. 84 inch .

The surface area of a cylinder can be found by the formula :

= 2 π r ² + 2 π h

The radius can be found to be:

= Diameter / 2

= 2 / 2

= 1 inch

The value of π is 3. 14.

This means the surface area would be:

= (2 x 3. 14 x 1 x 1) + (2 x 3. 14 x 1 x 2 )

= 6. 28 + 12. 56

= 18. 84 inch

Find out more on surface area at https://brainly.com/question/27440983

#SPJ1

To find (F-1)(1) for the given function f(x) = 41, we need to find the inverse function F-1(x), which is simply 41. Then, we evaluate F-1(1) to get the answer of 4.

The given function f(x) = 41 is a constant function, meaning that it has the same output value of 41 for every input value of x. In order to find (F-1)(1), we need to find the inverse function of f(x), denoted as F-1(x), and then evaluate F-1(1).

To find the inverse function, we need to switch the roles of x and f(x) in the function f(x) = 41 and solve for x. This gives us x = 41, which means that the inverse function is F-1(x) = 41. This is because F-1(f(x)) = x, so F-1(41) = x.

Now, we can evaluate F-1(1) by substituting 1 for x in the inverse function. This gives us F-1(1) = 41. Therefore, the answer is (d) 4.

Learn more about function here :-

https://brainly.com/question/12431044

#SPJ11

The length of segment AD is given as follows:

AD = 4.

The geometric mean theorem states that the length of the altitude drawn from the right angle of a triangle to its hypotenuse is equal to the geometric mean of the lengths of the segments formed on the hypotenuse.

Hence, in this problem, we have that the altitude of BD = 2 is the geometric mean of DC = 1 and AD, hence:

AD x 1 = 2²

AD = 4 units.

Which is the length of segment AD.

More can be learned about the geometric mean theorem at brainly.com/question/10216660

#SPJ1

The sum of the smallest positive 2-digit, 3-digit, and 4-digit multiples of 8 is 11,120.

To be a multiple of 8, a number must be divisible by 8, which means its last three digits must form a multiple of 8. Also, the first digit of the number cannot be 0, since it must be a two-digit number or larger.

Let's start with the two-digit multiple of 8. The smallest two-digit multiple of 8 is 16, which is not a three-digit or four-digit number. The next multiple of 8 is 24, which is also not a three-digit or four-digit number. The smallest two-digit multiple of 8 that is also a three-digit number is 104 (since 112 is not a multiple of 8).

Similarly, the smallest two-digit multiple of 8 that is also a four-digit number is 1008 (since 992 is not a multiple of 8).

Therefore, the three numbers we are looking for are 104, 1008, and 1008, with a sum of:

104 + 1008 + 10008 = 11120

So the sum of the smallest positive 2-digit, 3-digit, and 4-digit multiples of 8 is 11,120.

Learn more about arithmetic and number theory

brainly.com/question/3927222

#SPJ11

The standard deviation of the population of all sample means is approximately 0.577 times less than the standard deviation of the population of individual measurements σ.

What is the mean and standard deviation?

The standard deviation is a summary measure of the differences of each observation from the mean. If the differences themselves were added up, the positive would exactly balance the negative and so their sum would be zero. Consequently, the squares of the differences are added.

The standard deviation of the sampling distribution of sample means is smaller than the standard deviation of the population of individual measurements (σ) by a factor of 1/√n, where n is the sample size.

This is known as the standard error of the mean (SE) and is calculated as SE = σ/√n.

So, in this case, where n = 3, the standard deviation of the sampling distribution of sample means will be σ/√3, which is approximately 0.577 times σ.

Therefore, the standard deviation of the population of all sample means is approximately 0.577 times less than the standard deviation of the population of individual measurements σ.

To learn more about the mean and standard deviation visit:

brainly.com/question/475676

#SPJ4

the test statistic is 2.576 and the critical value is 1.645.

Since the test statistic is greater than the critical value, we reject the null hypothesis and conclude that there is evidence to support the alternative hypothesis that the mean amount of mercury in tuna fish for the new company exceeds 0.82 ppm.

To make a decision in this scenario, we need to use a hypothesis test. Let's set up the null and alternative hypotheses:

Null hypothesis (H0):

The mean amount of mercury in the tuna fish produced by the new company is less than or equal to 0.82 ppm.

Alternative hypothesis (Ha):

The mean amount of mercury in the tuna fish produced by the new company is greater than 0.82 ppm.

The test statistic is 2.576 and the critical value is 1.645.

Since the test statistic is greater than the critical value and is in the rejection region of the null hypothesis, we reject the null hypothesis.

we cannot say for certain whether this difference is statistically significant without knowing the sample size, the standard deviation of the sample, and the level of significance.

Reject the null hypothesis at the chosen significance level (which we don't have in this case), which suggests that the mean amount of mercury in the tuna fish produced by the new company is likely to be greater than 0.82 ppm.

This means that we have evidence to suggest that the mean amount of mercury in the tuna fish produced by the new company exceeds 0.82 ppm, as suspected by the scientist at the FDA.

For similar questions on test statistic

https://brainly.com/question/30780083

#SPJ11

The mean of the given data is 194.25 and the standard deviation from the given data is 18475.6875.

(a) Given that, the size of rocks at both 5 m and 25 m from the base of the cliff.

Using given mean and standard deviation formulae, we get

Here, mean=3885/20

= 194.25

Standard deviation=369513.75/20

= 18475.6875

Therefore, the mean of the given data is 194.25 and the standard deviation from the given data is 18475.6875.

Learn more about the standard deviation visit:

brainly.com/question/13905583.

#SPJ1

The alternative hypothesis would be: The proportion of BYU students who identify as Democrat and support the death penalty is significantly less than the proportion of BYU students who identify as Republican and support the death penalty.

The alternative hypothesis for this test would be: The proportion of BYU students who identify as Democrat and support the death penalty (p1) is less than the proportion of BYU students who identify as Republican and support the death penalty (p2). Mathematically, it can be written as:

H1: p1 < p2

Know more about alternative hypothesis here:

https://brainly.com/question/30665946

#SPJ11

The probability of selecting a composition of n with a second part equal to 1 is equal to (n-1)/4.

Let us consider a composition of n as an ordered sequence of positive integers where the sum of the integers is n.

The number of compositions of n is equal to 2ⁿ⁻¹,

Since there are n-1 spaces between the numbers where we can choose to either include or exclude a separator.

To calculate the probability that a randomly selected composition of n has a second part equal to 1,

Consider the second part of the composition.

It can be any positive integer from 1 to n-1, inclusive.

For the second part to be equal to 1,

Choose 1 as the second number in the composition and distribute the remaining n-2 among the remaining slots.

There are n-1 slots left since the second slot is already occupied by the number 1.

The remaining n-2 can be distributed in 2ⁿ⁻³ ways, since there are n-3 spaces left to distribute the remaining numbers.

Therefore, the probability of selecting a composition of n with a second part equal to 1 is,

P = (n-1) ×  2ⁿ⁻³ / 2ⁿ⁻¹

  = ( n - 1 ) × 2ⁿ⁻³⁻ⁿ⁺¹

   =  ( n - 1 ) × 2⁻²

  = (n-1) / 4

Therefore, the probability is equal to  (n-1)/4.

Learn more about probability here

brainly.com/question/31316917

#SPJ4