how does the potential of this cell change if the concentration of crno33 is changed to a 3.00 molar

35.292 kg of cryolite will be produced, to understand how following steps have to be followed:

The balanced chemical equation for the reaction between aluminum oxide [tex][tex]Al_{2}O_{3}[/tex], sodium hydroxide (NaOH), and hydrogen fluoride (HF) to produce cryolite 2[tex]Na_{3}3AlF_{6}[/tex] is:

(2[tex][tex]Al_{2}O_{3}[/tex]+6NaOH ) + (12HF ) -> (2[tex]Na_{3}3AlF_{6}[/tex] + 2NaCl)

Using the equation, we can calculate the limiting reagent, which is the reactant that gets completely consumed in the reaction and determines the amount of product that can be formed.

To find the limiting reagent, we need to calculate the number of moles of each reactant. We can do this by dividing the mass of each substance by its molar mass:

Moles of [tex]Al_{2}O_{3}[/tex] = 17.2 kg / 101.96 g/mol = 168.62 mol

Moles of NaOH = 57.4 kg / 40.00 g/mol = 1435 mol

Moles of HF = 57.4 kg / 20.01 g/mol = 2870 mol

According to the balanced equation, 2 moles of [tex]Al_{2}O_{3}[/tex] react with 6 moles of NaOH and 12 moles of HF to produce 2 moles of  2[tex]Na_{3}3AlF_{6}[/tex] . This means that the mole ratio of [tex][tex]Al_{2}O_{3}[/tex] to [tex]Na_{3}3AlF_{6}[/tex]  is 2:2 or 1:1, which indicates that 168.62 moles of [tex]Al_{2}O_{3}[/tex] will react with 168.62 moles of  2[tex]Na_{3}3AlF_{6}[/tex]

To determine how much NaOH and HF will be needed to react with the 168.62 moles of [tex]Al_{2}O_{3}[/tex], we can use the mole ratio of NaOH and HF to [tex]Al_{2}O_{3}[/tex], which is 6:2 or 3:1.

This means that 168.62 moles of [tex]Al_{2}O_{3}[/tex] will require 505.86 moles of NaOH (168.62 × 3) and 168.62 moles of HF.

Now we can calculate the amount of cryolite produced using the mole ratio of [tex]Na_{3}3AlF_{6}[/tex] to [tex]Al_{2}O_{3}[/tex], which is 2:2 or 1:1. This means that 168.62 moles of  2[tex]Na_{3}3AlF_{6}[/tex] will be produced.

Finally, we can convert the moles of  2[tex][tex]Na_{3}3AlF_{6}[/tex] to kilograms using its molar mass:

Mass of  2[tex]Na_{3}3AlF_{6} = 168.62 mol × 209.94 g/mol = 35,292 g or 35.292 kg

Therefore, 35.292 kg of cryolite will be produced.

To know more about the mole concept:

https://brainly.com/question/12805690

#SPJ11

If 17.2 kg of Al2O3(s), 57.4 kg of NaOH(l), and 57.4 kg of HF(g) react completely, 17.72 kg of cryolite will be produced.

The balanced chemical equation for the reaction between Al2O3(s), NaOH(l), and HF(g) to produce cryolite is:

2Al2O3(s) + 6NaOH(l) + 12HF(g) → 2Na3AlF6(s) + 6H2O(l)

Using the given amounts of reactants, we can determine which reactant is limiting and calculate the amount of product produced based on that.

First, we need to convert the mass of NaOH(l) and HF(g) to moles:

moles of NaOH(l) = 57.4 kg / 40.00 g/mol = 1,435 mol
moles of HF(g) = 57.4 kg / 20.01 g/mol = 2,868 mol

Next, we need to determine the limiting reactant. To do this, we can use the mole ratios from the balanced equation:

2 moles of Al2O3 : 6 moles of NaOH : 12 moles of HF : 2 moles of Na3AlF6

The ratio of moles of Al2O3 to NaOH to HF is 1:3:6, which means that we need 3 times as many moles of NaOH as Al2O3 and 6 times as many moles of HF as Al2O3.

moles of Al2O3 = 17.2 kg / 101.96 g/mol = 168.7 mol

Using the mole ratio, we can calculate the number of moles of NaOH and HF required:

moles of NaOH required = 3 x 168.7 mol = 506.1 mol
moles of HF required = 6 x 168.7 mol = 1,012.2 mol

Since we have 1,435 mol of NaOH and 2,868 mol of HF, both are in excess and Al2O3 is the limiting reactant.

Using the mole ratio from the balanced equation, we can calculate the amount of cryolite produced:

2 moles of Na3AlF6 : 2 moles of Al2O3

moles of Na3AlF6 produced = 168.7 mol / 2 x 2 = 84.4 mol

Finally, we can convert the moles of Na3AlF6 to kilograms:

mass of Na3AlF6 produced = 84.4 mol x 209.94 g/mol / 1000 = 17.72 kg

Therefore, 17.72 kg of cryolite will be produced.

To know more about the mole concept:

https://brainly.com/question/12805690

#SPJ11

The balanced chemical equation for the reaction of silver nitrate with sodium chloride is:

AgNO3 + NaCl → AgCl + NaNO3
From the equation, we can see that 1 mole of silver nitrate reacts with 1 mole of sodium chloride to produce 1 mole of silver chloride. The molar mass of silver nitrate is 169.87 g/mol and the molar mass of silver chloride is 143.32 g/mol.
To calculate the amount of silver chloride produced from 100g of silver nitrate, we first need to convert 100g to moles.
Number of moles of AgNO3 = 100g / 169.87 g/mol = 0.588 moles
Since sodium chloride is in excess, we assume that all the silver nitrate reacts completely to form silver chloride. Therefore, the amount of silver chloride produced is also 0.588 moles.
Mass of AgCl produced = number of moles of AgCl x molar mass of AgCl
= 0.588 moles x 143.32 g/mol
= 84.22 grams
Therefore, when 100g of silver nitrate is mixed with an excess of sodium chloride, 84.22 grams of silver chloride will be produced.

Learn more about silver nitrate here:

https://brainly.com/question/13263833

#SPJ11

Thermochemistry is the study of the relationships between chemistry and energy. It involves understanding how energy, particularly in the form of heat, is transferred during chemical reactions and physical processes.

This field focuses on the measurement and calculation of heat and energy changes that occur during chemical reactions, as well as the relationship between temperature and chemical reactions. Understanding the principles of thermochemistry can provide valuable insights into the behavior of chemical reactions and help predict the outcomes of chemical processes. In the context of relationships, thermochemistry can also play a role in understanding the energy dynamics between individuals and the chemistry that underlies attraction and bonding.

Learn more about chemical reactions here: brainly.com/question/29039149

#SPJ11

Trichloroacetic acid (TCA) is a commonly used chemical in the treatment of warts. It is a strong acid with a pKa value of 0.77, meaning that it dissociates almost completely in aqueous solution. TCA is often used as a caustic agent to destroy the infected tissue that causes warts.

When TCA is dissolved in water, it dissociates into trichloroacetate ion (TCA-), which is the active species responsible for the therapeutic effects of the treatment. The pH of a 0.19 M aqueous trichloroacetate ion solution can be calculated using the following equation:

pH = pKa + log([A-]/[HA])

where pKa is the acid dissociation constant of TCA (0.77), [A-] is the concentration of TCA- ion, and [HA] is the concentration of TCA.

Using the given concentration of 0.19 M for TCA-, we can assume that the concentration of TCA is also 0.19 M since the dissociation of TCA is nearly complete. Therefore, substituting these values into the equation, we get:

pH = 0.77 + log([0.19]/[0.19])

pH = 0.77 + log(1)

pH = 0.77

This calculation shows that the pH of a 0.19 M aqueous trichloroacetate ion solution is approximately 0.77, which is highly acidic. This low pH is necessary for the caustic action of TCA on the infected tissue of warts, but it also makes it important to handle TCA with care, as it can cause burns and other skin irritations. Overall, the use of TCA in the treatment of warts is effective, but it should be done with caution and under the guidance of a healthcare professional.

To know more Trichloroacetic acid (TCA)  click this link-

brainly.com/question/15077699

#SPJ11

The original concentration of the sodium oxalate was 0.0675 M.

The balanced equation for the reaction between potassium permanganate (KMnO₄) and sodium oxalate (Na₂C₂O₄) is:

5 C₂O₄²⁻ + 2 MnO₄⁻ + 16 H⁺ → 2 Mn²⁺ + 10 CO₂ + 8 H₂O

From the balanced equation, we can see that 5 moles of sodium oxalate react with 2 moles of potassium permanganate. Therefore, the number of moles of potassium permanganate used in the titration is:

n(KMnO₄) = M(KMnO₄) x V(KMnO₄) = 0.1500 M x 22.30 mL x (1 L/1000 mL) = 0.003345 moles

Using the stoichiometry of the balanced equation, we can determine the number of moles of sodium oxalate that reacted:

n(Na₂C₂O₄) = (5/2) x n(KMnO₄) = (5/2) x 0.003345 moles = 0.008362 moles

Finally, we can calculate the concentration of the original sodium oxalate solution:

M(Na₂C₂O₄) = n(Na₂C₂O₄) / V(Na₂C₂O₄) = 0.008362 moles / 10.00 mL x (1 L/1000 mL) = 0.0675 M

To know more about concentration, refer here:

https://brainly.com/question/30639206#

#SPJ11

The presence of an alternating double bond in a compound should be considered a structural feature when determining whether a compound is aromatic or not. Here option B is the correct answer.

Aromatic compounds are a class of organic compounds that exhibit unique chemical and physical properties. The structural characteristics that determine whether or not a compound is aromatic include the presence of a conjugated system of pi electrons that follows Hückel's rule, which states that the number of pi electrons in the compound must be 4n+2, where n is a non-negative integer.

One of the most important structural characteristics that must be considered is the presence of alternating double bonds in the compound. Aromatic compounds have a planar, cyclic structure in which every atom in the ring is sp2 hybridized and have a p orbital that can participate in the delocalized pi-electron system. This results in a stable, resonance-stabilized molecule that has a lower energy than its non-aromatic counterpart.

The number of carbon atoms in the compound is not a defining characteristic of aromaticity, as long as the compound has a planar, cyclic structure with alternating double bonds that satisfies Hückel's rule. However, the size of the compound can affect the stability of the aromatic system, with larger molecules generally being less stable than smaller ones.

To learn more about organic compounds

https://brainly.com/question/5994723

#SPJ4

Complete question:

Which of the following structural characteristics must be considered when determining whether or not a compound is aromatic?

A) Number of carbon atoms in the compound

B) Presence of alternating double bonds in the compound

C) Size of the compound

D) Solubility of the compound in water

To calculate the freezing point of the solution, we need to use the formula:

ΔTf = Kf x molality

where ΔTf is the change in freezing point, Kf is the freezing point depression constant, and molality is the concentration of solute in the solution.

First, we need to find the molality of the solution:

molality = moles of solute / mass of solvent in kg

The mass of water in the flask is 77.3 g, which is equivalent to 0.0773 kg. The molar mass of MgCl2 is 95.21 g/mol, so the number of moles of MgCl2 in the sample is:

moles of MgCl2 = 0.773 g / 95.21 g/mol = 0.008126 mol

Therefore, the molality of the solution is:

molality = 0.008126 mol / 0.0773 kg = 0.105 mol/kg

Next, we need to find the freezing point depression constant for water. The value of Kf for water is 1.86 °C/m.

Finally, we can plug in the values to find the change in freezing point:

ΔTf = 1.86 °C/m x 0.105 mol/kg = 0.1953 °C

The freezing point of pure water is 0 °C, so the freezing point of the solution is:

freezing point = 0 °C - 0.1953 °C = -0.1953 °C

Therefore, the freezing point of the solution is -0.1953 °C at 1 atm pressure.
To calculate the freezing point of the magnesium chloride solution, we'll use the freezing point depression formula:

ΔTf = Kf × molality × i

where ΔTf is the freezing point depression, Kf is the freezing point depression constant for water (1.86°C kg/mol), molality is the moles of solute per kilogram of solvent, and i is the van't Hoff factor (number of ions in the solution).

First, let's find the molality:
Molality = moles of solute / kg of solvent

Magnesium chloride (MgCl2) has a molar mass of 95.21 g/mol:
Moles of MgCl2 = 0.773 g / 95.21 g/mol ≈ 0.00812 mol

Now, convert the mass of water to kilograms:
77.3 g = 0.0773 kg

Calculate the molality:
Molality ≈ 0.00812 mol / 0.0773 kg ≈ 0.105 mol/kg

Next, find the van't Hoff factor for MgCl2. MgCl2 dissociates into 1 Mg2+ ion and 2 Cl- ions, so i = 3.

Finally, apply the formula:
ΔTf ≈ 1.86°C kg/mol × 0.105 mol/kg × 3 ≈ 0.586°C

Now, subtract the freezing point depression from the normal freezing point of water at 1 atm (0°C):
Freezing point ≈ 0°C - 0.586°C ≈ -0.586°C

So, the freezing point of the magnesium chloride solution at 1 atm is approximately -0.586°C.

To learn more about freezing point Click this!

brainly.in/question/6960443

#SPJ11

The correct answer is D. +30.4 kJ when given the ΔH∘ values of two reactions.

To solve for ΔH∘rxn for the given reaction, we need to use Hess's Law which states that the total enthalpy change in a chemical reaction is independent of the pathway between the initial and final states.
First, we need to reverse reaction 2 and change the sign of its ΔH∘ value: [tex]N_2(g) + 2O_2(g) --> 2NO_2(g)[/tex] ΔH∘ = 66.4 kJ.
Next, we need to multiply reaction 1 by 2 and flip it: [tex]2N_2O(g) --> 4NO(g) + O_2(g)[/tex] ΔH∘ = -326.4 kJ.
Finally, we need to multiply reaction 2 by 2 and add it to the previous equation: [tex]4NO_2(g) --> 2N_2(g) + 4O_2(g)[/tex] ΔH∘ = -132.8 kJ.
Adding the three equations, we get:
[tex]2N_2O(g) + 3O_2(g) --> 4NO_2(g)[/tex] (Option D)

To learn more about Hess's Law click here https://brainly.com/question/14561923

#SPJ11

The pH of a solution that is made by combining 15.0 mL of 18.0 M acetic acid with 5.60 g of sodium acetate and diluting to a total volume of 1.50 L is 3.45

To calculate the pH of the solution, we need to first determine the concentrations of acetic acid (CH₃COOH) and sodium acetate (CH₃COONa) in the solution.

1. Calculate the moles of acetic acid:
moles of CH₃COOH = volume (L) x concentration (M)
moles of CH₃COOH = 0.015 L x 18.0 M = 0.27 mol

2. Calculate the moles of sodium acetate:
moles of CH₃COONa = mass (g) / molar mass (g/mol)
moles of CH₃COONa = 5.60 g / (82.03 g/mol) = 0.0683 mol

3. Calculate the concentrations in the final solution:
[CH₃COOH] = moles of CH₃COOH / total volume (L) = 0.27 mol / 1.50 L = 0.18 M
[CH₃COONa] = moles of CH₃COONa / total volume (L) = 0.0683 mol / 1.50 L = 0.0455 M

4. Now, we can use the Henderson-Hasselbalch equation to find the pH:
pH = pKa + log ([A-] / [HA])
The pKa of acetic acid is 4.74. Substituting the values into the equation:
pH = 4.74 + log (0.0455 / 0.18)

5. Solve for pH:
pH ≈ 4.74 - 1.29 = 3.45

The pH of the solution is approximately 3.45.

More on pH: https://brainly.com/question/30934747

#SPJ11

To calculate the entropy change for melting one mole of gold, we need to use the formula ΔS = ΔH_fusion / T, where ΔH_fusion is the heat of fusion and T is the temperature at which the melting occurs.

In this case, we are given that the heat of fusion of gold is 2.99 kcal/mol and the melting point of gold is 1337.33K. To convert this temperature to units of kelvin (K), we simply add 273.15 to get 1610.48K.

Plugging these values into the formula, we get:

ΔS = 2.99 kcal/mol / 1610.48K = 0.00186 kcal/(mol*K)

Therefore, the entropy change for melting one mole of gold is 0.00186 kcal/(mol*K). This indicates that melting gold results in an increase in disorder or randomness, which is characteristic of a process that is favored under typical conditions.

It's important to note that this calculation assumes that the melting process is reversible and occurs at a constant pressure and temperature. In practice, there may be additional factors that affect the entropy change, such as the presence of impurities or other substances in the gold.

To know more about  entropy change for melting pls visit:

brainly.com/question/12517900

#SPJ11

The balanced equation for this reaction is N₂(g) + 3H₂(g) → 2NH₃(g). This chemical reaction is known as the Haber process.

Nitrogen (N₂) and hydrogen (H₂) react together in a combination reaction to form ammonia (NH₃). This chemical reaction is known as the Haber process and is an essential industrial method for producing ammonia, which is a key component in fertilizers and many other products.

The balanced chemical equation for this combination reaction is:

N₂(g) + 3H₂(g) → 2NH₃(g)

In this equation, one molecule of nitrogen (N₂) reacts with three molecules of hydrogen (H₂) to produce two molecules of ammonia (NH₃). It is important to note that the coefficients in the balanced equation (1, 3, and 2) are the lowest possible coefficients, as they represent the simplest whole-number ratio of the reacting elements and products.

This reaction occurs under high pressure and temperature conditions in the presence of an iron-based catalyst, which helps speed up the reaction rate. The Haber process is an exothermic reaction, meaning it releases heat as it proceeds, contributing to its efficiency in producing ammonia.

In summary, nitrogen and hydrogen combine in a combination reaction, known as the Haber process, to form ammonia. The balanced equation for this reaction is N₂(g) + 3H₂(g) → 2NH₃(g), with the lowest possible coefficients of 1, 3, and 2 for nitrogen, hydrogen, and ammonia, respectively.

To know more about Haber process, refer to the link below:

https://brainly.com/question/30928282#

#SPJ11

A Toxicity Characteristic Leaching Procedure (TCLP) rating indicates that a lamp has successfully passed specific tests concerning its toxicity levels.

These tests are designed to determine whether a particular waste material, such as a lamp, exhibits hazardous characteristics based on the presence and concentration of certain toxic elements, such as mercury, lead, or cadmium.

The TCLP tests involve a simulation of leaching conditions, mimicking the potential release of hazardous elements from the lamp when it is disposed of in a landfill. The procedure includes extracting a sample from the lamp, followed by an analysis of the extract to quantify the concentrations of the target toxic elements.

If the concentrations of these elements are below the established regulatory limits, the lamp receives a TCLP rating, signifying that it is not considered hazardous waste under the Resource Conservation and Recovery Act (RCRA). This classification allows for more straightforward disposal procedures and reduces the environmental risks associated with disposing of the lamp.

In summary, a TCLP rating means that the lamp has passed stringent tests regarding its toxicity levels, ensuring that it poses minimal environmental and health risks when properly disposed.

Know more about toxicity levels here :

brainly.com/question/30498848

#SPJ11

The empirical formula of the compound is CH₂O. The steps to obtain the formula involve finding the moles of each element and dividing by the smallest mole value.

To find the empirical formula of the compound, we need to determine the moles of each element in the sample.

First, we need to find the number of moles of CO₂ and H₂O produced in the combustion reaction:

moles of CO₂ = 1.6004 g / 44.01 g/mol = 0.0364 mol

moles of H₂O = 0.6551 g / 18.02 g/mol = 0.0363 mol

Next, we can use the law of conservation of mass to find the number of moles of carbon in the sample:

moles of C = moles of CO₂ = 0.0364 mol

Then, we can find the number of moles of hydrogen and oxygen by subtracting the moles of CO₂ and C from the total moles of H₂O:

moles of H = (0.0363 mol * 2) - (0.0364 mol * 2) = 0.0358 mol

moles of O = (0.0363 mol * 1) - (0.0364 mol * 1) = 0.0001 mol

Finally, we can convert the moles of each element to their respective mass:

mass of C = 0.0364 mol * 12.01 g/mol = 0.436 g

mass of H = 0.0358 mol * 1.01 g/mol = 0.036 g

mass of O = 0.0001 mol * 16.00 g/mol = 0.002 g

The empirical formula of the compound is therefore CH₂O.

To know more about the empirical formula refer here :

https://brainly.com/question/1247523#

#SPJ11

If glucose is the only energy source for animals, then the carbon dioxide exhaled is generated through the reactions of the citric acid cycle. Specifically, during the citric acid cycle, acetyl-CoA derived from the breakdown of glucose enters the cycle and undergoes a series of reactions that produce carbon dioxide as a byproduct. Therefore, all of the carbon dioxide exhaled by animals is generated by the reactions of the citric acid cycle.

When glucose is the only energy source, approximately two-thirds of the carbon dioxide exhaled by animals is generated by the reactions of the citric acid cycle. This is because glucose is first broken down into two molecules of pyruvate during glycolysis, and then each pyruvate is converted into acetyl-CoA, which enters the citric acid cycle. For each glucose molecule, the citric acid cycle produces six molecules of carbon dioxide, while glycolysis and pyruvate decarboxylation generate two. Therefore, 6 out of the total 8 carbon dioxide molecules (6/8 = 3/4 or 75%) come from the citric acid cycle.

To know more about citric acid cycle visit:

https://brainly.com/question/29857075

#SPJ11

In Recycle City, you can get information on what to do with leftover cleaning products at the Household Hazardous Waste Facility.

It is important that we not throw chemicals into the regular trash because they can be harmful to the environment and human health. Chemicals can leach into the soil and groundwater, contaminating water sources and harming wildlife. They can also release toxic gases when burned in incinerators or landfills.

By properly disposing of leftover cleaning products, we can prevent these harmful effects and protect the environment. The Household Hazardous Waste Facility is designed to handle these types of materials and can safely dispose of or recycle them. It is important to follow proper disposal guidelines to ensure the safety of ourselves and our community.

To know more about the Trash, here

https://brainly.com/question/30362573

#SPJ1

1) Bone tissue is composed of an organic matrix, which gives it tensile strength; it is also composed of an inorganic calcified matrix, which gives it hardness.

2) Osteoporosis is a condition, whereby a certain amount of bone density is lost; it then increases the risk of fractures and can lead to other complications.

Bone tissue is composed of an organic matrix, which gives it tensile strength, and an inorganic calcified matrix, which gives it hardness. The organic matrix is made up of collagen fibers and proteoglycans, which provide flexibility and resilience to the bone tissue. The inorganic matrix is composed mainly of calcium and phosphate minerals, such as hydroxyapatite, which give the bone its hardness and rigidity.

Osteoporosis is a condition whereby a certain amount of bone density is lost, leading to weakened bones that are more susceptible to fractures. It occurs when the body loses more bone tissue than it can replace, resulting in a decrease in bone density and mass. Osteoporosis is most common in women after menopause, as the decrease in estrogen levels can lead to bone loss. It can also occur in men and women due to certain medications, diseases, or lifestyle factors, such as a lack of exercise or a diet low in calcium and vitamin D.

To know more about Osteoporosis refer here:

https://brainly.com/question/7246059

#SPJ11

The volume base added for the titration of 25.0 mL of 0.20 M hydrofluoric acid with 0.20 M sodium hydroxide is 25.0 mL.

To determine the volume of base added when pH is certain, we need to use the equation for the titration of a weak acid with a strong base, which is:

pH = pKa + log([base]/[acid])

Where pH is the desired pH, pKa is the acid dissociation constant of the weak acid, [base] is the concentration of the base (in this case, sodium hydroxide), and [acid] is the concentration of the acid (in this case, hydrofluoric acid).

Since we are given the initial concentration and volume of hydrofluoric acid (0.20 M, 25.0 mL), we can calculate the number of moles of hydrofluoric acid present:

n(acid) = C × V

= 0.20 M × 0.025 L

= 0.005 moles

Since hydrofluoric acid is a weak acid, we need to use the dissociation constant (Ka) to calculate the pKa:

Ka = [H⁺][F⁻]/[HF] = 7.2 x 10⁻⁴

pKa = -log(Ka) = 3.14

Now we can use the pH equation to calculate the concentration of sodium hydroxide needed to achieve a certain pH. For example, if we want a pH of 5.0:

5.0 = 3.14 + log([base]/[acid])

log([base]/[acid]) = 1.86

[base]/[acid] = [tex]10^{1.86}[/tex]

= 75.13

[base] = 75.13 x [acid]

= 75.13 x 0.20 M

= 15.03 M

To find the volume of sodium hydroxide needed to reach this concentration, we can use the following equation:

n(base) = C x V

n(acid) = n(base) since they react in a 1:1 ratio

V(base) = n(base) / C(base)

= 0.005 moles / 0.20 M

= 0.025 L or 25.0 mL

Therefore, the volume of 0.20 M sodium hydroxide needed to achieve a pH of 5.0 when titrating 25.0 mL of 0.20 M hydrofluoric acid is 25.0 mL.



Learn more about sodium hydroxide: https://brainly.com/question/29327783

#SPJ11

The mass of the phosphoric(V) acid, H₃PO₄ , is formed in the reaction is 9.40 g.

The chemical equation is as :

PCl₅ + H₂O  --->   H₃PO₄ + HCl

The mass of the PCl₅ = 20 g

The moles of the PCl₅ = mass / molar mass

The moles of the PCl₅ = 20 / 208.24

The moles of the PCl₅ = 0.096 mol

The 1 mol of the PCl₅ forms the 1 mole of the H₃PO₄

The moles of the H₃PO₄ = 0.096 mol

The mass of the H₃PO₄ = moles ×  molar mass

The mass of the H₃PO₄ = 0.096 × 97.99

The mass of the H₃PO₄ = 9.40 g.

The mass of the Phosphoric acid, H₃PO₄ is 9.40 g.

To learn more about moles here

https://brainly.com/question/31178341

#SPJ1

This question is incomplete, the complete question is :

Calculate the mass of phosphoric(V) acid, H3PO4 , formed in the reaction. The mass of the PCl₅ is 20 g.

PCl₅ + H₂O  --->   H₃PO₄ + HCl

The ceric nitrate test is a common method used to detect the presence of certain organic compounds, such as alcohols and ketones, in a sample. However, it can be difficult to observe a positive ceric nitrate test on an old bottle of a diet cola drink due to several reasons.

Firstly, the presence of other compounds or additives in the cola drink may interfere with the reaction or reduce the sensitivity of the ceric nitrate test. For instance, some cola drinks contain ascorbic acid, which is a reducing agent that can react with ceric ions and reduce them to cerous ions, leading to false-negative results.

Secondly, the organic compounds that could react with ceric nitrate may have degraded or evaporated due to the age of the cola drink. This would lead to a reduced overall concentration of the compounds in the sample, which could make it difficult to observe a positive ceric nitrate test.

Lastly, the purity and condition of the ceric nitrate reagent itself can affect the accuracy and sensitivity of the test. If the reagent has degraded or been contaminated, it may not work as expected or give false-positive results.

Therefore, interpreting a positive ceric nitrate test on an old bottle of a diet cola drink requires caution and confirmation by other methods if necessary.

To know more about the ceric nitrate test refer here :

https://brainly.com/question/16106744#

#SPJ11

The average kinetic energy of gas molecules is directly related to the temperature of the gas. According to the Kinetic Molecular Theory, all gas particles in a container, regardless of their mass or size, have the same average kinetic energy when they are at the same temperature. This is described by the equation:

Average Kinetic Energy = (3/2) kT

where k is Boltzmann's constant and T is the temperature in Kelvin. As a result, the average kinetic energy of gas molecules in a container will be the same for all containers if they have the same temperature. If we are given that container A, B, and C all have the same temperature, then the average kinetic energy of the gas molecules in each container will be the same. Therefore, the correct answer would be (d) the same in all three containers.

However, if the temperatures of the containers are different, we would need to know the temperatures in order to determine which container has the greatest average kinetic energy. The container with the highest temperature would have the greatest average kinetic energy.

Learn more about Kinetic Molecular Theory here:

https://brainly.com/question/15013597

#SPJ11

D-glucose and L-glucose differ the most in their three-dimensional structures.  Stereochemistry plays a significant role in determining the three-dimensional structure of molecules, particularly in monosaccharides. The difference in three-dimensional structures is essential because it influences the properties, functions, and interactions of these molecules.

Out of all the monosaccharides, D-glucose and L-glucose differ the most in their three-dimensional structures. Although they have the same chemical formula, they are mirror images of each other, also known as enantiomers. This means that their chiral centers, or carbon atoms bonded to four different substituents, have opposite configurations. In the case of D-glucose and L-glucose, all four chiral centers differ.

The D- and L- designation indicates the configuration of the chiral carbon farthest from the aldehyde or keto group. In D-glucose, the hydroxyl group on this carbon points to the right, whereas, in L-glucose, it points to the left. This difference in configuration leads to distinct three-dimensional structures, which impacts their biological activity and interactions with enzymes and receptors.

In summary, the monosaccharides that differ most in their three-dimensional structures are D-glucose and L-glucose due to their enantiomeric relationship, which arises from the opposite configurations of all chiral centers. This stereochemical difference significantly affects their properties, functions, and molecular interactions.

Learn more about saccharides here:

https://brainly.com/question/780562

#SPJ11

The work done by the system can be calculated using the First Law of Thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system.

So, work done = heat added - change in internal energy.

Using the given values, we can substitute them into the equation:

Work done = 722 kJ - 226 kJ

Work done = 496 kJ

Therefore, the work done by the system is 496 kJ.

amount of heat gained by the system and the resulting change in internal energy. We are asked to find the amount of work done by the system. To do so, we use the First Law of Thermodynamics, which relates the heat added to the system, the work done by the system, and the change in internal energy of the system.

By rearranging the equation and substituting the given values, we can calculate the work done by the system. The result of 496 kJ indicates the amount of energy that was transferred by the system to its surroundings through mechanical work.

learn more about Law of Thermodynamics

https://brainly.com/question/26035962

#SPJ11

A volume of 50.50 mL of 0.1160 M HF is titrated with 0.1200 M NaOH.  48.8 mL of the base are required to reach the equivalence point.

To find the volume of NaOH required to reach the equivalence point, we need to use the balanced chemical equation for the reaction between HF and NaOH:

HF + NaOH -> NaF + H₂O

From the equation, we can see that the stoichiometry of the reaction is 1:1 between HF and NaOH, which means that one mole of NaOH reacts with one mole of HF.

At the equivalence point, all of the HF will react with the NaOH, which means that the moles of NaOH added will be equal to the moles of HF initially present in the solution:

moles of NaOH = moles of HF

To calculate the moles of HF, we can use the concentration of the HF solution and the volume of the solution:

moles of HF = concentration x volume

= 0.1160 mol/L x 0.05050 L

= 0.0058608 mol

Therefore, we need 0.0058608 mol of NaOH to reach the equivalence point.

To calculate the volume of NaOH required, we can use the concentration of the NaOH solution and the moles of NaOH:

moles of NaOH = concentration x volume

0.0058608 mol = 0.1200 mol/L x volume

volume = 0.0058608 mol / 0.1200 mol/L

volume = 0.0488 L or 48.8 mL

Therefore, we need 48.8 mL of 0.1200 M NaOH to reach the equivalence point.

To know more about the equivalence point refer here :

https://brainly.com/question/29999744#

#SPJ11

A mixture of gases contains 0.290 mol CH₄, 0.260 mol C₂H₆, and 0.290 mol C₃H₈, partial pressures of the gases are:

Partial pressure is the pressure that one gas in a gas mixture will exert if it occupies the same volume on its own. In a mixture, every gas exerts a certain pressure. The partial pressures of the various gases in a mixture of an ideal gas add up to its total pressure.

n = n(CH₄) + n(C₂H₆) + n(C₃H₈)

n = 0.290 mol + 0.260 mol + 0.290 mol = 0.840 mol

Step 2: Calculate the partial pressure of each gas

We will use the following expression.

pi = P × Χi

where,

pi: partial pressure of the gas "i"

P: total pressure

Χi: mole fraction of the gas "i"

pCH₄ = 1.40 atm × 0.290 mol/0.840 mol = 0.483 atm

pC₂H₆ = 1.40 atm × 0.260 mol/0.840 mol = 0.433 atm

pC₃H₈ = 1.40 atm × 0.290 mol/0.840 mol = 0.483 atm.

Learn more about partial pressures:

https://brainly.com/question/19813237

#SPJ4

When a cell uses oxygen for respiration in a solution containing dissolved oxygen, the oxygen enters the cell, is utilized in cellular respiration to produce ATP, and results in the production and removal of carbon dioxide as a waste product.

When a cell uses oxygen for respiration in a solution containing dissolved oxygen, the following occurs:

1. Oxygen enters the cell: The dissolved oxygen in the solution diffuses across the cell membrane and enters the cell.

2. Cellular respiration takes place: The oxygen is used in a process called cellular respiration, which occurs in the mitochondria of the cell.

3. Energy production: During cellular respiration, oxygen reacts with glucose to produce ATP (adenosine triphosphate), which is the cell's main source of energy. This process also produces carbon dioxide and water as waste products.

4. Waste removal: The carbon dioxide produced during cellular respiration diffuses out of the cell and into the solution, where it may be removed or utilized by other processes.

To know more about Respiration:

https://brainly.com/question/27231320

#SPJ11

The molarity of the phosphoric acid solution is 0.053 M.To determine the molarity of the phosphoric acid solution, we can use the equation:M1V1 = M2V2

Where M1 is the molarity of the phosphoric acid solution, V1 is the volume of the phosphoric acid solution in liters, M2 is the molarity of the sodium hydroxide solution, and V2 is the volume of the sodium hydroxide solution in liters.

We are given V1 = 20.00 mL, which we need to convert to liters:

V1 = 20.00 mL = 0.02000 L

We are also given V2 = 15.9 mL of a 0.200 M sodium hydroxide solution. We can convert this to liters and use it to find the moles of sodium hydroxide used in the titration:

V2 = 15.9 mL = 0.0159 L

n(NaOH) = M2 * V2 = 0.200 M * 0.0159 L = 0.00318 moles NaOH

Since phosphoric acid has three acidic hydrogens, it will require three moles of sodium hydroxide to react completely with one mole of phosphoric acid. Therefore, the moles of phosphoric acid in the original solution can be calculated as:

n([tex]H3PO_{4}[/tex]) = n(NaOH) / 3 = 0.00318 moles NaOH / 3 = 0.00106 moles [tex]H3PO_{4}[/tex]

M1 = n([tex]H3PO_{4}[/tex] / V1 = 0.00106 moles [tex]H3PO_{4}[/tex] / 0.02000 L = 0.053 M

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ11

The element that would have to lose two electrons in order to achieve a noble gas electron configuration is option E) Sr (Strontium).

Strontium has 38 electrons and its noble gas configuration would be the same as the noble gas element before it, which is Kr (Krypton). It has an atomic number of 38, indicating that it has 38 protons and 38 electrons in its neutral form. In order to achieve a noble gas electron configuration, Sr would need to lose two electrons, which would make its total electron count equal to 36, the same as that of the noble gas Argon (Ar). Therefore, Strontium needs to lose two electrons to have the same electron configuration as Kr.

To learn more about electrons click here https://brainly.com/question/28977387

#SPJ11

A Lewis acid is a compound or ion that can accept a pair of electrons to form a new covalent bond. [tex]AlF_3[/tex] is the only species that can behave as a Lewis acid but not as a Bronsted acid.

On the other hand, a Bronsted acid is a species that donates a proton (H+) to a base. Among the given species, [tex]AlF_3[/tex] can behave as a Lewis acid but cannot behave as a Bronsted acid. This is because [tex]AlF_3[/tex] has an incomplete octet and can accept a pair of electrons to form a new bond. However, it does not have any hydrogen atom to donate a proton to a base, which is a requirement for a species to behave as a Bronsted acid. [tex]H_2O[/tex], [tex]C_2H_4[/tex], BrOH, and [tex]NH_4[/tex] can act as both Lewis and Bronsted acids as they have both electron-pair accepting and proton-donating capabilities.

To learn more about Lewis acid click here https://brainly.com/question/15570523

#SPJ11

As the number of covalent bonds between two atoms increases, the distance between the atoms decreases, and the strength of the bond between them increases.

Covalent bonds are formed when atoms share electrons to form a stable molecule. The more electrons that are shared between atoms, the stronger the bond will be.

As more covalent bonds are formed between atoms, the electrons are pulled closer to the nuclei of the atoms.

This attraction between the electrons and the nuclei causes the atoms to be drawn closer together, resulting in a shorter bond length.

The shorter distance between the atoms also leads to a stronger bond as the electrons are held more tightly and are less likely to be shared with other atoms.

This relationship between the number of covalent bonds, the distance between atoms, and the strength of the bond is a fundamental principle in chemistry.

It is important to understand this relationship when predicting the properties and behavior of molecules, such as their reactivity and physical properties.

to know more about covalent bonds refer here:

https://brainly.com/question/30480258#

#SPJ11

Using our Liq-Liq extraction procedure, you could extract up to 120 mg of caffeine from one bag of Lipton black tea.

Caffeine is a chemical stimulant found in many foods and drinks, such as coffee, tea, chocolate, energy drinks, and some medications. It belongs to a group of compounds known as xanthines, which work by blocking the action of a neurotransmitter called adenosine in the brain. This increases alertness and, in some cases, improves physical performance. Caffeine can also act as a mild diuretic and can increase the production of stomach acid. In moderate doses, it is generally considered safe, although it can have negative side effects if consumed in large amounts. It can also interact with certain medications and increase the risk of heart problems in people with existing heart conditions. Caffeine is one of the most widely used stimulants in the world, with an estimated 85% of the US population consuming it on a daily basis.

To learn more about caffeine

https://brainly.com/question/31382682

#SPJ4