Please help me, I don't bite. 3.

Answer: A bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.

Explanation:

A chlorine atom being more electronegative in nature is able to attract a hydrogen atom more readily towards itself as compared to a bromine atom.

Since bromine is less electronegative in nature so bromine will be more selective as a hydrogen abstracting agent. As a result, bromine radical is more stable in nature than chlorine radical.

Thus, we can conclude that bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.

Answer:

liquefied petroleum gas

LPG is prepared by refining natural gas. it is made by refining crude oil or from extracted natural gas streams as they emerge from the ground.

Answer:

The solution is 0.450 M. How many mL are needed?

- 0.667 mL

Explanation:

Answer:

The appropriate answer is "1.96 mol".

Explanation:

The given values are:

Volume,

V = 26.5 L

Pressure,

P = 1.7 atm

Temperature,

T = 280 K

Now,

The number of moles (n) will be:

= [tex]\frac{PV}{RT}[/tex]

By substituting the values, we get

= [tex]\frac{1.7\times 26.5}{0.0821\times 280}[/tex]

= [tex]\frac{45.05}{22.988}[/tex]

= [tex]1.96 \ mol[/tex]

Answer:

The explanation as per the given query is presented in the following paragraph.

Explanation:

Thus the above is the correct explanation.

The measured absorbance will be higher, thereby creating systematic error.

In conclusion, the measured absorbance will be higher, thereby creating systematic error.

Learn more in:

https://brainly.com/question/14919298

Answer:

Explanation:

This is a halogenation reaction i.e substitution or replacement of a single or more than a single hydrogen atom in the organic alkane compound with the halogen(here it is chlorine).

The chlorination of 1-chloro-2,2,3,3-tetramethylpentane under UV light resulted in the formation of five (5) dichloro derivatives which are shown in the image attached below.

Also, the compounds containing a stereocenter (i.e a location within the compound composing of various substituents in which the interchangeability of these substituents has the tendency of resulting into a stereoisomer) are indicated with an asterisk in the image below.

From the image below:

compound 1 ⇒  1,1-dichloro-2,2,3,3-tetramethylpentane = 2° C

∴

The given relative reactivity rate for 2°  = 3.6x

For compound 2 ⇒  1,4-dichloro-2,2,3,3-tetramethylpentane = 2°  = 3.6x

For compound 3 ⇒ 1,5-dichloro-2,2,3,3-tetramethylpentane = 1°  = 1x

For compound 4 ⇒ 1-chloro-2-chloromethyl-2,3,3-trimethylpentane

= 1°  = 1x

For compound 5 ⇒ 1-chloro-3-chloromethyl-2,2,3-trimethylpentane

= 1°  = 1x

As such, we have:

2(3.6x) + 3(1x) = 100

7.2x + 3x = 100

10.2x = 100

x = 100/10.2

x = 9.803°

∴

For compound (1) = 3.6(9.803) = 35.3%

For compound (2) = 3.6(9.803) = 35.3%

For compound (3) = 1(9.803) = 9.803°%

For compound (4) = 1(9.803) = 9.803°%

For compound (5) = 1(9.803) = 9.803°%

Answer:

i) Humans - drinks lot of water

- use umbrella

- use hats and sunglasses

- apply sunblock when swimming

- wear rush guard

ii) Plants - water the plants

-put a shade on the plants

iii) Animals - provide pets with plenty of water

- place the animals under the tree during noon time

Answer:

21.6 g

Explanation:

The reaction that takes place is:

First we convert the given masses of both reactants into moles, using their respective molar masses:

0.6 moles of CH₄ would react completely with (2 * 0.6) 1.2 moles of O₂. As there are more O₂ moles than required, O₂ is the reactant in excess and CH₄ is the limiting reactant.

Now we calculate how many moles of water are produced, using the number of moles of the limiting reactant:

Finally we convert 1.2 moles of water into grams, using its molar mass:

Answer:

Molecules of O₂F₂ = mass of O₂F₂ × (1 mole O₂F₂ / 70 g O₂F₂) × (6.02 × 10²³ molecules / one mole of O₂F₂)

Explanation:

The Avogadros constant gives the the number of specified entities in one mole of a substance. One mole of any substance contains 6.02 × 10²³ particles. Therefore, one mole of O₂F₂ contains 6.02 × 10²³ molecules.

Also, the molar mass of a substance is the mass in grams of one mole of that substance. It is obtained by summing the relative atomic masses of all the atoms of the elements in the substance. For O₂F₂, the molar mass = (2 × 16 + 2 × 19) g/mol = 70 g/mol

Converting to molecules of O₂F₂;

To convert from grams of a substance to molecules of that substance, multiply by the ratio of one mole and mass of one mole, and then by the number of molecules per mole.

Molecules of A = mass of A × (1 mole / mass of one mole) × (6.02 × 10²³ molecules / 1 mole)

Therefore,Molecules of O₂F₂ = mass of O₂F₂ × (1 mole O₂F₂ / 70 g O₂F₂) × (6.02 × 10²³ molecules /one mole of O₂F₂)

Answer:

2.The reaction is third order overall

Explanation:

THIS ANSWER IS CORRECT

MARK ME AS BRAINLIEST

Answer:

) Making a sandwich To prepare a liquid sample to IR analysis, firstly place a drop of the liquid on the face of a highly polished salt plate (such as NaCl, AgCl or KBr), then place a second plate on top of the first plate so as to spread the liquid in a thin layer between the plates, and clamps the plates together.

Answer:

14

73%

Explanation:

The mean Number of years worked :

. (sum of service years) / employees in the

(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /

(417 / 30)

= 13.9 years

= 14 years

The percentage of employees who have worked for atleast 10 years :

Number of employees with service years ≥ 10 years = 22 employees

Total number of employees

Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%

Answer:

n = 0.0814 mol

Explanation:

Given mass, m = 35.7g

The molar mass of Tin(IV) bromate, M = 438.33 g/mol

We need to find the number of moles of bromine. We know that,

No. of moles = given mass/molar mass

So,

[tex]n=\dfrac{35.7}{438.33}\\\\n=0.0814\ mol[/tex]

So, there are 0.0814 moles of bromine in 35.7g of  Tin(IV) bromate.

The question is incomplete, the complete question is:

A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.

Answer: The number of moles of solid iodine produced is 0.0327 moles

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of solid iodine = 8.31 g

Molar mass of solid iodine = 253.8089 g/mol

Plugging values in equation 1:

[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]

Hence, the number of moles of solid iodine produced is 0.0327 moles

Answer:

a) NH₄NO₃ ⇒ N₂O + 2 H₂O

b) 1.69 × 10²³ molecules

Explanation:

Step 1: Write the balanced equation

NH₄NO₃ ⇒ N₂O + 2 H₂O

Step 2: Convert 11.2 g of NH₄NO₃ to moles

The molar mass of NH₄NO₃ is 80.04 g/mol.

11.2 g × 1 mol/80.04 g = 0.140 mol

Step 3: Calculate the moles of H₂O produced

0.140 mol NH₄NO₃ × 2 mol H₂O/1 mol NH₄NO₃ = 0.280 mol H₂O

Step 4: Calculate the number of molecules in 0.280 moles of water

We will use Avogadro's number.

0.280 mol × 6.02 × 10²³ molecules/1 mol = 1.69 × 10²³ molecules

Answer:

34.03 g

Explanation:

We'll begin by converting 635 mL to L. This can be obtained as follow:

1000 mL = 1 L

Therefore,

635 mL = 635 mL × 1 L / 1000 mL

635 mL = 0.635 L

Thus, 635 mL is equivalent to 0.635 L

Next, we shall determine the number of mole of the solute (KBr) in the solution. This can be obtained as follow:

Volume = 0.635 L

Molarity = 0.450 M

Mole of KBr =?

Mole = Molarity × Volume

Mole of KBr = 0.450 × 0.635

Mole of KBr = 0.286 mole

Finally, we shall determine the mass of 0.286 mole of KBr. This can be obtained as follow:

Mole of KBr = 0.286 mole

Molar mass of KBr = 39 + 80

= 119 g/mol

Mass of KBr =?

Mass = mole × molar mass

Mass of KBr = 0.286 × 119

Mass of KBr = 34.03 g

Thus, the mass of the solute (KBr) in the solution is 34.03 g

Answer:

The number of moles of H₃PO₄ that reacted is 0.000343 moles

Note: Some data is missing. Data from the attachment is used for the calculationsinnthe explanation below.

Explanation:

The reaction is a neutralization reaction between NaOH and H₃PO₄. The equation of the reaction is given as follows:

3 NaOH + H₃PO₄ ---> Na₃PO₄ + 3 H₂O

The molarity of the NaOH solution is 0.238 mol/L.

Average volume of NaOH used during the titration to arrive to endpoint = (4.6 + 3.9 + 4.5) mL / 3 = 4.33 mL

Molarity is defined ratio of the number of moles of solute to the volume of solution. Mathematically, molarity = number of moles/volume in Litres

Number of moles of NaOH reacted = 0.238 mol/L × (4.33mL × 1 L/1000 mL)

Number of moles of NaOH = 0.00103 moles

From the equation of the reaction, 3 moles of NaOH reacts with 1 mole of H₃PO₄

0.00103 moles of NaOH will react with 0.00103 x 1/3 moles of H₃PO₄ = 0.000343 moles of H₃PO₄.

Therefore, number of moles of H₃PO₄ that reacted is 0.000343 moles

Answer:

heat rate= 1281W

length = 15.8m

Explanation:

we have this data to answer this question with

Tmi = 85 degrees

Tmo = 35 degrees

Ts = 25 dgrees

flow rate = 25 degrees

using engine oil property from table a-5

Tm = Tmo - TMi/2 = 333k

u =0.522x10⁻²

k = 0.26

pr = 51.3

cp = 2562 J/kg.k

mcp(Tmo-Tmi) =

0.01 x 2562(35-85)

= 1281 W

we find the change in Tim

= [(35-25)-(85-25)]/ln[(35-25)/(85-25)]

= -50/ln0.167

= -50/-1.78976

= 27.9°c

we finf the required reynold number

4x0.01/πx0.003x0.522x10⁻²

= 0.04/0.00004921

= 812.8

= 813

we find approximate correlation

NuD = hd/k

NuD = 3.66

3.66 = 0.003D/0.26

cross multiply

0.003D = 3.66x0.26

D = 3.66x0.26/0.003

= 317.2

As = 1281/317x27.9

= 0.145

As = πDL

L = As/πD

= 0.145/π0.003

= 0.145/0.009429

L = 15.378

Answer:

The answer is

-control rods

Answer:

B. Control Rods.... via A P E X

Answer: Sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.

Explanation:

When a substance (solute) dissolves partially in a solvent then it is known as partially miscible in the solvent. In such cases, a small amount of solute remains at the bottom of solution.

If a solute dissolves completely in solvent like water such that only one layer is seen in the solution then it means that the solute is miscible in solvent.

Thus, we can conclude that sugar is added to water and initially completely dissolves, but eventually solid sugar collects on the bottom of the container. Sugar and water are both partially miscible. This produces a dynamic equilibrium. Ethanol (a liquid) is added to water and only a single layer is observed no matter how much ethanol is added. Ethanol and water are miscible.

Answer: In order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.

Explanation:

When one group in a molecule is replaced by another one then it is called a substitution reaction.

For a substitution reaction reaction to occur at a minimum, it is necessary to have a leaving group that helps in creating a carbocation and hence a nucleophile can easily attack.

For example, [tex]CH_{4} + Cl_{2} + h\nu \rightarrow CH_{3}Cl + HCl[/tex]

Thus, we can conclude that in order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.

Answer:

The answer would be B, putting thermal energy into something means you're adding heat into it.

Answer:

Bohr Model is the correct answer

Answer:

Electron -Cloud Model

Explanation:

Just took the quiz got 100%

Answer:

c

Explanation:

its c because it has multiple mixture blueberries flower water and others thats why i says c

As the gas expands on the surrounding, work is done by the system.

Therefore, W= -279J

Absorbtion of heat,q= +216J

∆U=q+W = (216-279)J= -63J

Answer:

4.00 is the pH of the mixture

Explanation:

The ethyl amine reacts with HNO3 as follows:

C2H5NH2 + HNO3 → C2H5NH3⁺ + NO3⁻

To solve this question we need to find the moles of ethyl amine and the moles of HNO3:

Moles C2H5NH2:

0.0500L * (0.100mol/L) = 0.00500 moles ethyl amine

Moles HNO3:

0.201L * (0.025mol/L) = 0.005025 moles HNO3

That means HNO3 is in excess. The moles in excess are:

0.005025 moles HNO3 - 0.00500 moles ethyl amine =

2.5x10⁻⁵ moles HNO₃

In 50 + 201mL = 251mL = 0.251L:

2.5x10⁻⁵ moles HNO₃ / 0.251L = 9.96x10⁻⁵M = [H+]

As pH = -log [H+]

pH = -log 9.96x10⁻⁵M

pH = 4.00 is the pH of the mixture

Answer:

Less stable

Explanation:

When an exothermic reaction occurs, the reactants have a greater energy level than the outputs. The products, in other respects, are more stable than that of the reactants.

The outcomes of an exothermic reaction have a lower energy to react. The enthalpy of a process is the difference between some of the activation energy and the power of the products. 

Answer: The mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.

Explanation:

Given: Atoms of zinc = [tex]3.75 \times 10^{21}[/tex]

It is known that 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] atoms. So, the number of moles in given number of atoms is as follows.

[tex]Moles = \frac{3.75 \times 10^{21}}{6.022 \times 10^{23}}\\= 0.622 \times 10^{-2}\\= 0.0062 mol[/tex]

As moles is the mass of a substance divided by its molar mass. So, mass of zinc (molar mass = 65.39 g/mol) is calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\0.0062 mol = \frac{mass}{65.39 g}\\mass = 0.405 g[/tex]

Thus, we can conclude that the mass in [tex]3.75 \times 10^{21}[/tex] atoms of zinc is 0.405 g.

Explanation:

4 tctcgcgcgctctchvvyctctc