Please give me the answer to this question

Impact Speed means the maximum speed of impact tested upon the bumper of the vehicle pursuant to sections 581.6 and 581.7 of part 581 of title 49 of the Code of Federal Regulations.

To learn more about impact speed to refer:

https://brainly.com/question/15695646

#SPJ1

The addition of two sound waves produces a new wave of higher amplitude if their compressions and refractions line up. It is also known as constructive interference.

Interference can be described as a phenomenon in which two waves combine by adding at every single point in space and time, to form a resultant wave of greater or lower amplitude.

Constructive and destructive interference occurs in the interaction of waves that are correlated with each other because they come from the same source.

When two sound waves propagate in the same direction in phase with each other, their amplitude gets added, and the resultant wave is produced from constructive interference.

When two waves interfere with each other and have a displacement in the opposite direction.  When a crest of a wave meets the trough of another wave, the waves undergo destructive interference.

Learn more about interference, here:

https://brainly.com/question/16098226

#SPJ1

According to the given statement The time required is 2 seconds.

An unseen factor is an agent that has the power to alter the resting or moving condition of a body. It has a direction or a magnitude. The stress applied is the location at which force is applied, and the direction where the force applied is known also as direction of the force.

The vector composition of mass (m), acceleration, and the amount of force is used to express force (a). Mathematically, the equation or equation for force may be written as follows:

                             Force = mass x acceleration.

We know the force and the mass, so we can write:

6,000 N

= (1,200 kg) x (acceleration).    

      i.e. Acceleration = 6000N/1200kg = 5 m/s² .

That's the acceleration.  The speed changes by 5 m/s each second

that the force acts on it.  If the force pushes from behind, then it goes

5 m/s per second faster. It moves 5 m/s slower each second if the force is pushing from the front.

We wish to slow it down from its current speed of 10 m/s to 0 m/s. Therefore, the force must push from the front, and the task will be finished in (10/5) = 2 seconds.

So, time required is 2 seconds.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ1

According to the right-hand rule, the magnetic field of the solenoid will be directed towards the left direction.

Right Hand Thumb Rule is the rule which is used If a current carrying conductor is imagined to be held in the right hand direction such that the thumb always points along the direction of the current flow, then the direction of the wrapped fingers in the hand will give the direction of the magnetic field lines of the bar magnet.

By the application of the right-hand rule, the magnetic field of the solenoid will be directed towards the left hand direction.

Learn more about Bar magnet here:

https://brainly.com/question/18403251

#SPJ1

The horizontal distance travelled by the box is 143 m.

The horizontal distance travelled by the box is calculated by determining the time of motion of the box and the horizontal velocity of the airplane.

The time of motion of the box from the vertical height in which it was dropped is calculated as follows;

h = vt + ¹/₂gt²

where;

h = 0 + ¹/₂gt²

t = √ ( 2h / g )

t = √ ( 2 x 40 / 9.8 )

t = 2.86 seconds

The horizontal distance travelled by the box is calculated as follows;

d = Vₓ t

where

d = ( 50 m/s ) x ( 2.86 s )

d = 143 m

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

The complete question is below;

A box is dropped out of a moving airplane. The airplane is traveling at 50m/s East. The box is dropped from rest with respect to the airplane. The box travels a vertical distance of 40 m before landing on a trampoline. The airplane continues traveling at a constant speed after the box is dropped and the wind resistance on the falling box is negligible. Find the horizontal distance travelled by the box.

90 F. The temperature of the mixture can be calculated using the Ideal Gas Law.

This states that the product of the pressure, volume, and absolute temperature of a gas is equal to the product of the number of moles of the gas and the universal gas constant.

Using this equation, we can solve for the temperature of the mixture, given the total pressure and the total volume of the mixture.

We can first calculate the total number of moles of the mixture, by assuming both gases are ideal:

18 cu ft of gas at 60 psia and 190 F = 1.64 moles

28 cu ft of gas at 40 psia and 60 F = 1.28 moles

Total moles of the mixture = 2.92 moles

Using the Ideal Gas Law, we can then calculate the temperature of the mixture:

(100 psia x 22 cu ft x T) = (2.92 moles x 0.082)

T = 90 F.

What is the Ideal Gas Law?

The Ideal Gas Law is an equation that describes the relationship between pressure, volume, temperature, and amount (in moles) of an ideal gas. It states that: PV = nRT, where P is the pressure, V is the volume, n is the amount of substance, R is the ideal gas constant, and T is the temperature.

Hence, Option D is correct.

To know more about the Ideal Gas Law,

https://brainly.com/question/15132707

#SPJ1

Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency. The article can explore different definitions. This is the typical definition for dispersion (waves).

When sinusoidal waves with various wavelengths propagate at various speeds, a wave packet with mixed wavelengths has a tendency to disperse in space. Dispersion in wave theory is the phenomena where a wave's phase velocity changes depending on its frequency.

The article can explore different definitions. This is the typical definition for dispersion (waves).

A full set of approximate solutions to the one-electron Schrödinger equation are found in a three-dimensional atomic lattice that is randomly filled with atoms of different kinds and has, on average, the periodicity of a Bloch wave.

Equations are provided that enable the calculation of each wave's energy, average behavior, absent a phase factor, close to any sort of atom, and damping parameter.

A comparison is made between a periodic lattice with a complicated, energy-dependent potential and a random A-B lattice. The dispersion relation of the system is obtained by solving the eigenvalue problem in this potential using any of the established techniques for periodic potentials.

To learn more about Dispersion theory from given link

https://brainly.com/question/28461293

#SPJ1

the ball have no mechanical kinetic energy:

This refers to the energy that an object possessed due to its motion or due to its position. It is calculated by getting the product of the mass of the object and its velocity and dividing it by two. It is measured in joules, J.

if a referee tosses a basketball in the air, the ball will not  have mechanical kinetic energy:

Learn more about kinetic energy on

https://brainly.com/question/25501807

#SPJ1

1 N*m = 1 Joule

40 N*m = 40 joules

The mechanical advantage of the lever is 3.5.

The ideal mechanical advantage of the lever is 4

The efficiency of the lever is 87.5 %.

The mechanical advantage of the lever is the ratio of the load overcame by the lever to the effort applied by the lever.

M.A = Load / Effort

From the graph we will find the change in load to change in effort is calculated as;

M.A = ( 160 N - 20 N ) / ( 50 N - 10 N )

M.A = 3.5

The ideal mechanical advantage of the lever is calculated as follows;

I.M.A = distance travelled by effort / distance travelled by load

I.M.A = ( 2 m ) / ( 0. 5 m )

I.M.A = 4

The efficiency of the lever is calculated as follows;

E = M.A / I.M.A x 100%

E = ( 3.5 / 4 ) x 100%

E = 87.5 %

Learn more about efficiency of lever here: https://brainly.com/question/29263794

#SPJ1

Answer:

Radioactive materials give off a form of energy called ionizing radiation.

Answer:

v3 = 0 gm/s / 700g

Explanation:

To solve this problem, you need to use the principle of conservation of momentum, which states that the total momentum of a system remains constant unless acted upon by an external force. In this case, the total momentum of the system (the 2kg object before it explodes) is equal to the sum of the momenta of the three pieces after the explosion.

You can calculate the momentum of each piece by multiplying its mass by its velocity:

P1 = 800g * 30 m/s = 24,000 gm/s

P2 = 500g * 520 m/s = 260,000 gm/s

The total momentum of the system is the sum of these two momenta:

Ptotal = P1 + P2 = 24,000 gm/s + 260,000 gm/s = 284,000 g*m/s

The third piece has a mass of 2kg - 800g - 500g = 700g. We can use the conservation of momentum equation to find its velocity:

Ptotal = (700g * v3) + (800g * 30 m/s) + (500g * 520 m/s)

v3 = (Ptotal - (800g * 30 m/s) - (500g * 520 m/s)) / 700g

v3 = (284,000 gm/s - (800g * 30 m/s) - (500g * 520 m/s)) / 700g

v3 = (284,000 gm/s - 24,000 gm/s - 260,000 gm/s) / 700g

v3 = (284,000 - 24,000 - 260,000) gm/s / 700g

v3 = 0 gm/s / 700g

The velocity of the third mass is 0 m/s.

Hope this helps.

The formula for the horizontal component (Fx), which is the angle the force makes with the horizontal, is Ftens•cosine(). Ftens• sine() can be used to compute the upward component (Fy), where is the angle that the force produces with the horizontal.

The portion of a force that works horizontally with regard to a body is known as its horizontal component. Its vertical component is known as its vertical component.

The pulling of the box is with the rope horizontal. When the rope is angled Because Is less than, the horizontal component (= F cos ) is less. As a result, it is the proper response.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ1

Resistors limits the current/amps but keep the voltage the same.

You don't want to attach them together with a wire since there would be too much current loose through, such that the battery heats up till it blows or something.

Current is directly corresponding to voltage; a doubling of the voltage will double the current. But the current is also inversely comparable to the resistance; a doubling of the resistance will halve the current.

So we can conclude that Resistance residue is the same, but power becomes four times i.e. multiplication. If the current is I and the voltage is V,

Learn more about resistors here: https://brainly.com/question/24858512

#SPJ1

Doing contracting work for government agencies of private businesses

The mission control center is a facility that is responsible for controlling and coordinating the operations of a spacecraft during a mission. It is typically run by NASA or another space agency and is used to monitor and communicate with spacecraft, as well as to plan and execute mission objectives. The mission control center is not typically involved in contracting work for government agencies or private businesses.

Hope This Helps You!

Precipitation amount, storm frequency, and severity, storm duration, kind of precipitation, wind during storm, and wind during evaporation are the main precipitation and storm elements that influence interruption loss (Kenneth, 1996).

All procedures that stop rainfall from instantly reaching the soil are referred to as interceptions. The two main ways that vegetation intercepts water are by catching it on leaf surfaces throughout the canopy and by depositing litter on the ground.

Precipitation that is intercepted by leaves, plant branches, and the forest floor prevents it from reaching the soil and instead stays on the surface.

To know more about Precipitation visit:-

https://brainly.com/question/29762381

#SPJ1

Answer:

CM of a system ( 0.5l , 0.25l )

Explanation:

x = (m1.x1 +m2.x2 +m3.x3) / ( m1 + m2 +m3)

x = ( m x 0 + m x 0 + 2m x l ) / ( m+m+2m)

x = 2m x l / 4m

x = 0.5 l

y = (m1 x y1 +m2 x y2 +m3 x y3) / ( m1 + m2 +m3)

y = (m x 0) + m x l + 2m x 0 ) / ( m + m + 2m )

y = m x l / 4m

y = 0.25 l

Answer:

Fault

Explanation:

it only carries a current if there is a fault.

Answer:

Choice A. gamma rays

Explanation:

The magnitude of the constant acceleration of the ball is 9.7 m/s².

Acceleration is the rate of change of velocity.

To calculate the constant acceleration of the ball, we use the formula below.

Formula:

From the question,

Given:

From the question,

Given:

Substitute these values into equation 1

Hence, the acceleration is 9.7 m/s².

Learn more about acceleration here:  https://brainly.com/question/26216029

#SPJ1

Answer:

One point in favor of using nuclear fission to generate electric energy is that it is a relatively low-carbon option, producing fewer greenhouse gas emissions than fossil fuels. However, there are several points against using fission as an energy source. One is that it produces radioactive waste that can be difficult and costly to dispose of safely. Another is that there is the risk of accidents or leaks, which can have serious consequences for both people and the environment. Additionally, the construction of nuclear power plants is expensive and time-consuming, and the plants themselves have a limited lifespan.

In the figure below, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.

Periodic or oscillatory motion is defined as a motion that repeats itself. Due to a restoring force or torque, an object in such motion oscillates around an equilibrium position.

Energy is conserved in oscillation.

So, the maximum loss in Potential Energy = Maximum gain in Kinetic energy

5 J - 1 J = Maximum gain in Kinetic energy

Maximum gain in Kinetic energy = 4 J

[tex]0.5 \times m \times vmax^2 = 4\\0.5 \times 2.0 \times 10^-3\; Kg \times vmax^2 = 4 J\\vmax^2 = 4 \times 10^3 m^2/s^2\\vmax = 63.2 m/s[/tex]

Therefore, the maximum speed of a 2.0 g particle that oscillates between x = 2.0 mm and x = 8.0 mm is 63 m/s.

To learn more about oscillation, refer to the link:

https://brainly.com/question/27542934

#SPJ1

Answer:

-0.0069 rad/s

Explanation:

The change in angular velocity of the rod can be determined by using the conservation of angular momentum equation: Lf = Li.

The initial angular momentum of the rod is Li = Iwo and the final angular momentum of the rod is Lf = Iwf.

Plugging in the given values, we get:

(1.05 x 10^-3 kg•m^2)(0.606 rad/s) + (5 x 10^-3 kg)(0.609 m)^2(wf) = (1.05 x 10^-3 kg•m^2)(wo).

Solving for wf, we get wf = -0.0069 rad/s.

Therefore, the change in angular velocity of the rod is -0.0069 rad/s.

The following which is not a safety tip for outdoor activities is to go alone for a sense of oneness with nature and is therefore denoted as option A.

This is referred to as the condition of being protected from harm or other danger and it involves the use of various methods and activities and an example is to ensure that a  basic first aid kit is available so as to help in the incident of an injury.

However going alone for a sense of oneness with nature is not a safety tip as should in case any issue arises there will be no one to support and rescue such individual.

Read more about Safety here https://brainly.com/question/8430576

#SPJ1

The full question is:

Which of the following is not a safety tip for outdoor activities

a. go alone for a sense of oneness with nature

b. bring a basic first aid kit

c. bring a flashlight or headlamp

d. pack plenty of water and energy-dense food

Answer:

total potential energy is 383.18.

Explanation:

It is because that when we hold something at the influence of gravity than work is done . Similarly we know that

Potential Energy is Equal to the product of m g and h.Here weight gives the product of mass and acceleration due to gravity.so

PE = mgh

= 112.7×3.4

=383.18 joule

Unit of energy is joule

heating or pressing but heating is most appropriate, so the answer is heating.

Answer:

Infinity. Yes, specific value of water during phase change is infinity. This is because, as long as water is present and it is changing phase (at boiling point or at any other constant temperature), the temperature of the water does not change no matter what amount of heat you are supplying to the water. Thus, its specific heat value is infinity.

The force is 196 N (20kg x 9.8 m/s2)

Force is an action or influence that causes an object to change its state of motion or rest. Force can be exerted by a single object or by two or more objects interacting with each other. Examples of force include friction, gravity, magnetism, electricity, and pressure. The magnitude of a force is usually measured in newtons (N) and is determined by the amount of mass and acceleration of the object it is acting upon.

The force exerted on the coyote by the ground is equal to the mass of the coyote multiplied by the acceleration due to gravity, which is 9.8 m/s2.

To learn more about force
https://brainly.com/question/12970081
#SPJ1