The actions necessary to create an action potential should be completed in the following order: 4, 2, 5, 1, 3. Therefore, choice (C) is the appropriate response.
An action or membrane potential is a sudden and rapid change from the membrane's resting state (about -70 millivolts). It is produced in neurons and other cells that exhibit the excitability trait, such as myocytes (muscle cells). By delivering a stimulus with a threshold value, it can be produced (a minimum value in millivolts required to generate a membrane potential). The creation of the membrane potential happens in three steps. The following is a description of these phases:
The threshold potential opens the voltage-gated sodium ion channels during the depolarization phase. This results in the admission of sodium ions into the cell, which increases the membrane potential.
Overshoot phase: The overshoot phase is when the membrane or action potential reaches around +61 mV (millivolts) as a result of the activation of sodium channels (an extreme positivity phase).
Phase of repolarization: As the sodium ion channels close, the permeability for sodium ions quickly declines during this phase. The voltage-gated potassium channels also open as a result of the overshoot phase value, allowing potassium ions to exit the cell and resulting in a drop in the electropositive value of an action potential. The action potential eventually comes to rest as a result. As a result of this phase, the membrane or action potential enters the hyperpolarization phase, which is more electronegative than the resting state.
Learn more about Hyperpolarization here:
https://brainly.com/question/27181895
#SPJ4
Which compound does not have a linear molecular geometry? A) CO_2 B)H_2O C) HCI D) HCN E) C_2H_2
B) H2O does not have a linear molecular geometry.
What is molecular geometry?
The way in which a molecule's atoms are arranged in three dimensions is known as its molecular geometry. In addition to bond lengths, bond angles, torsional angles, and any other geometrical characteristics that govern the position of each atom, it also provides the general form of the molecule.
H2O is a bent or V-shaped molecule, with a bond angle of approximately 104.5 degrees, due to the presence of two lone pairs on the oxygen atom, which push the hydrogen atoms away from each other. The other compounds listed (CO2, HCl, HCN, and C2H2) all have a linear molecular geometry.
Hence, B) H2O does not have a linear molecular geometry.
To learn more about molecular geometry:
https://brainly.com/question/19354582
#SPJ4
An ideal monatomic gas initially has a temperature of 330 K and a pressure of 6. 32 atm. It is to expand from volume 474 cm3 to volume 1590 cm3. If the expansion is isothermal, what are (a) the final pressure and (b) the work done by the gas
If the expansion is isothermal (a) Final pressure: The final pressure will be proportional to the inverse of the final volume, so the final pressure will be 6.32 atm * 474 cm3 / 1590 cm3 = 1.82 atm.
What is the effect of temperature on the final pressure during an isothermal expansion?
The effect of temperature on the final pressure during an isothermal expansion is minimal. In an isothermal expansion, the temperature of the gas remains constant, meaning that the final pressure can only be affected by changes in volume. The final pressure is determined using the ideal gas law, which states that the pressure and volume of a gas are proportional, and can be calculated using the equation P2 = P1 * (V1/V2). The temperature does not affect the final pressure, as long as it remains constant during the expansion.
(b) Work done by the gas: In an isothermal expansion, the work done by the gas is proportional to the change in volume and the pressure, so the work done will be 1.82 atm * (1590 cm3 - 474 cm3) = 4.36 x 10^3 J.
To know more about Isothermal visit:
brainly.com/question/12023162
#SPJ4
why is regressing absorbance vs concentration more useful than regressing transmittance vs concentration during spectrophotometric analysis?
In a spectrophotometric analysis, regression of absorbance vs concentration is more informative than regression of transmittance versus concentration because absorbance measurements are more sensitive to concentration changes than transmittance measurements.
The definition of absorbance measurements is "the logarithm of the ratio of incident to transmitted radiant power through a sample (excluding the effects on cell walls)". For samples that scatter light, an alternate definition of absorbance is "the negative logarithm of one minus absorptance, as measured on a homogeneous sample." The phrase is used to describe the quantification of experimental measurement data in a number of technological domains. Despite the fact that the expression pertains to calculating how much light is absorbed, it is frequently confused with calculating how much light is "lost" to a detector system by alternative techniques.
To know more about absorbance measurements please refer:
https://brainly.com/question/28865864
#SPJ4
In an experiment of 7.0 of impure calcium carbonate for heated to a very high temperature and 2.5 grams of carbon dioxide performed. Calculate the percentage purity of the calcium carbonate.
Answer:
The correct answer is 64.3%
Explanation:
To calculate the percentage purity of the calcium carbonate, we need to determine the amount of calcium carbonate present in the 7.0 grams of impure sample. This can be done by using the following equation:
Percentage purity = (Mass of pure substance / Total mass) x 100%
Since 2.5 grams of carbon dioxide was produced during heating, we can assume that 2.5 grams of the impure sample were calcium carbonate. Therefore, the mass of the pure substance is:
Mass of pure substance = 7.0 g - 2.5 g = 4.5 g
And the percentage purity of the calcium carbonate is:
Percentage purity = (4.5 g / 7.0 g) x 100% = 64.3%
So, the impure calcium carbonate in the experiment has a purity of 64.3%.
I would greatly appreciate Brainliest.
Have a nice day.
how much work must be done to move one sodium ion from the inside of the cell to the outside?
Moving a single sodium ion from the inside of a cell to the outside requires a significant amount of work, as the ion must be actively transported across the cell membrane.
What is the sodium ?Sodium is a chemical element that is essential for life and occurs naturally in many foods. It is known by its symbol Na and has an atomic number of 11. Sodium is the sixth most abundant element in the Earth’s crust and is an essential electrolyte for the body, helping to regulate blood pressure, nerve impulse transmission, and muscle contraction. It is found in many processed foods, and in high concentrations in table salt, canned vegetables, and canned meats. Too much sodium can lead to high blood pressure and other health problems.
To learn more about sodium
https://brainly.com/question/27655686
#SPJ4
what volume (in ml) of 0.50 m potassium nitrate contains 0.023 mol of potassium nitrate?
The volume in the mL of the 0.50 M of potassium nitrate that contains 0.023 mol of the potassium nitrate is 0.046 L.
the formula of the potassium nitrate is KNO₃.
The molarity of the potassium nitrate = 0.023 M
The moles of the potassium nitrate = 0.023 mol
The molarity expression is expressed as :
The molarity of the potassium nitrate = moles / volume
The volume of the potassium nitrate = moles / molarity
The volume of the potassium nitrate = 0.023 / 0.50
The volume of the potassium nitrate = 0.046 L
Thus, the of potassium nitrate that is KNO₃ is 0.046 L.
To learn more about mole here
https://brainly.com/question/29724957
#SPJ4
Suppose 163. 9 g of Na3(PO4) in solution mixed with sufficient CaCl2 in solution yields 116 g of Ca3(PO4)2(s). What is the percent yield of Ca3(PO4)2(s)?
To calculate the percent yield of Ca3(PO4)2(s), we need to find the theoretical yield, which is calculated by multiplying the moles of Na3(PO4) by the mole ratio of Ca3(PO4)2 to Na3(PO4) in the balanced equation.
What is the mass of Na3(PO4) used in the reaction?
The mass of Na3(PO4) used in the reaction is 163.9 g. This is the starting amount of the reactant before the reaction with CaCl2. The reaction produces 116 g of Ca3(PO4)2(s), and the percent yield of the product can be calculated based on the actual yield compared to the theoretical yield. Theoretical yield = (163.9 g Na3(PO4)) / (163 g/mol Na3(PO4)) * (3 mol Ca3(PO4)2 / 1 mol Na3(PO4)) = 194.35 g Ca3(PO4)2
Percent yield = (actual yield / theoretical yield) * 100% = (116 g Ca3(PO4)2 / 194.35 g Ca3(PO4)2) * 100% = 59.87%
To know more about CaCl2 visit:
brainly.com/question/16960598
#SPJ4
Describe what happened with each interaction: charged balloon and wooden board and charged balloon and metal plate. Was there any difference in the behaviors?
When a charged balloon is brought near a wooden board, the electrons in the balloon are attracted to the positively charged protons in the board, causing the balloon to stick to the board. This behavior is known as electrostatic attraction.
When a charged balloon is brought near a metal plate, electrons from the metal plate are attracted to the positively charged balloon, causing the balloon to stick to the metal plate. This behavior is also due to electrostatic attraction.
The main difference in behavior between the two interactions is the source of the electrons. In the first interaction, the electrons came from the balloon and were attracted to the board, while in the second interaction, the electrons came from the metal plate and were attracted to the balloon.
Other than the source of the electrons, the behaviors of the two interactions are very similar, and both demonstrate the principles of electrostatic attraction and the behavior of charged objects.
To know more about electrostatic attraction click on the link below:
https://brainly.com/question/14889552#
#SPJ11
Select the statement that best describes a buffer.A) A buffer prevents the pH of a solution from changing when an acid or base is added.B) A buffer causes acidic solutions to become alkaline, and alkaline solutions to become acidic.C) Buffer resists change in pH by accepting hydrogen ions when acids are added to the solution and donating hydrogen ions when bases are added A buffer stabilizes the pH of a solution by preventing acids or bases from dissociating.D) Buffered solutions are always neutral, with a pH of 7.
The statement that best describes a buffer solution is c) Buffer resists change in pH by accepting hydrogen ions when acids are added to the solution and donating hydrogen ions when bases are added.
A buffer solution is a mixture of a weak acid and its conjugate base (or a weak base and its conjugate acid) that helps to resist changes in pH when small amounts of an acid or base are added to the solution. The weak acid and its conjugate base act together to "buffer" the solution and prevent large changes in pH.
Buffers are important in many biological, chemical, and industrial processes, where the maintenance of a stable pH is crucial. For example, buffer solutions are used in blood and other bodily fluids to regulate the pH, and in many industrial processes to stabilize the pH of process streams and effluents.
Therefore, The statement that best describes a buffer solution is c) Buffer resists change in pH by accepting hydrogen ions when acids are added to the solution and donating hydrogen ions when bases are added.
To know more about buffer solution refer to:
brainly.com/question/24262133
#SPJ4
Rank the following ions in order of increasing basicity. Be sure to answer all parts. ?
In terms of increasing reactivity, the compounds in the electrophillic aromatic substition are ranked C, A, and B.
The electron-releasing group OCH3 is. Any time the benzene ring has an electron-releasing group attached, the molecule is extremely reactive.
Cl is leaving the organisation. The least reactive state of a molecule is when it contains a withdrawing group. In chemistry, the word "reactivity" might be a little confusing. It appears to combine kinetic and thermodynamic principles.
Specifically, whether and how soon a drug responds. Actually, the two variables are distinct and typically temperature-dependent. For instance, it is frequently asserted that Group I metals (Na, K, etc.) have more reactivity as they move toward the bottom of the periodic table or that hydrogen's reactivity is demonstrated by its interaction with oxygen.
In actuality, particle size as well as position within the group play a role in how quickly alkali metals react, as shown, for instance, by how they react with water. Despite having a relatively large equilibrium constant, hydrogen does not react with oxygen until the flame starts a radical reaction that results in an explosion.
For such more question on electrophillic aromatic
https://brainly.com/question/14803468
#SPJ4
Note: The correct question would be as bellow,
Rank the the following compounds in order of increasing reactivity in electrophilic aromatic substitution.
How many electrons does 2 covalent bonds?
In a double covalent bond, there are four shared electrons. A covalent bond is formed when two atoms exchange one or more pairs of electrons.
What is covalent bonding and what are some examples?The sharing of electron pair between atoms occurs in covalent bonds. In contrast to polar covalent bonds, which are formed when electrons are exchanged between atoms with uneven electronegativity, electron pairs shared between atoms with equal or very similar electronegativity form nonpolar covalent bonds, such as H-H or C-H. (e.g., H–O).
What distinguishes ionic from covalent bonds?An atom can establish bonds with other atoms in two main ways: covalent and ionic. The sharing of electrons between two or more atoms forms a covalent connection. When two or more ions join contact, they can create ionic bonds that are held together by charge differences.
To know more about covalent bonds, visit:
brainly.com/question/19382448
#SPJ4
what kind of intermolecular forces act between a methane molecule and a nitrogen molecule?
The kind of intermolecular forces act between a methane molecule and a nitrogen molecule is London-Dispersion forces.
CH₄ is a nonpolar molecule. The only intermolecular forces that exist in methane are London-Dispersion forces.
Same goes for N₂ as it is also a nonpolar molecule.
Thus, two nonpolar molecules will only have London-Dispersion forces between them.
The weakest known intermolecular force is known as the London dispersion force. The London dispersion force is a temporary attractive force that is formed when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles. London-Dispersion forces are sometimes called an induced dipole-induced dipole attraction.
Learn more about intermolecular forces from the link given below.
https://brainly.com/question/22934662
#SPJ4
Use the following equation for problems # 5-8 4 Fe(Cro2)2+8 K2CO3+7022 Fe203+ 8 K2Cr04+8 CO2 5. The number of grams of Fe(CrO2)2 required to produce 3.0 grams of Fe203.
8.41 grams of Iron(II) chromite required to produce 3.0 grams of Fe203.
The equation shows that 4 grams of Fe(CrO2)2 react with 8 grams of K2CO3 to produce 7022 grams of Fe203 and 8 grams of K2CrO4 along with 8 grams of CO2. To find the number of grams of Fe(CrO2)2 required to produce 3.0 grams of Fe203, we can use the mole ratio of the two compounds in the reaction.
Moles of Fe2O3 produced = mass/molecular weight
= 3/159.69 = 0.01879 mol
From the stoichiometry of the reaction
2 mol Fe2O3 produced from = 4 mol Fe(CrO2)2
0.01879 mol Fe2O3 produced from = 4 × 0.01879/2
= 0.03757 mol Fe(CrO2)2
Mass of Fe(CrO2)2 require = moles × molecular weight
= 0.03757 mol × 223.83 g/mol
= 8.41 g
Learn more about Iron(II) chromite:
brainly.com/question/6651888
#SPJ4
After world war ii, people began living in suburban areas. How might the movement of people from cities to suburbs be related to the development of pesticides by chemists?.
The development of pesticides by chemists enabled people to move from cities to suburbs and live in more rural areas because the pesticides made it possible to protect crops from pests and disease.
What is suburbs?
Suburbs are residential areas outside of cities and towns. They are often made up of smaller neighborhoods and are considered part of the metropolitan area. They are usually characterized by a lower population density than cities and often consist of single-family homes, apartment buildings, and other residential dwellings. Suburbs often have more green space and parks than cities, and may also include shopping malls, restaurants, and other businesses. The locals in suburbs typically have more of a suburban lifestyle, with a focus on family, leisure, and residential living.
This helped to make it possible for people to live in areas where they could have more space and a greater sense of community and safety. Additionally, the increased production of food allowed for more people to move to the suburbs, which further drove the development of better infrastructure to service these areas.
To know more about Suburbs
brainly.com/question/17013155
#SPJ4
What are the products of a Diels-Alder reaction?
The products of a Diels-Alder reaction are cyclohexene derivatives, which are formed from the reaction of a diene molecule and a dienophile molecule.
What is a Diels-Alder reaction and what type of reaction is it?The Diels-Alder reaction is a type of organic chemical reaction that forms a new carbon-carbon bond between a diene (a molecule with two double bonds) and a dienophile (an alkene molecule). This reaction is considered a type of cycloaddition reaction, where two or more unsaturated reactants combine to form a cyclic product with multiple new bonds. The Diels-Alder reaction is a powerful tool in organic synthesis and is used to create a wide range of compounds, including natural products, pharmaceuticals, and polymers. The reaction is known for its high stereoselectivity and regioselectivity, meaning that the product can be precisely controlled in terms of its configuration and the placement of functional groups. Overall, the Diels-Alder reaction is an important and widely used reaction in the field of organic chemistry.
To know more about Diels-Alder visit: https://brainly.com/question/29727048
#SPJ4
how many moles of gas are there in a gas-filled balloon which has a volume of 67.0 l at a pressure of 742mmhg and a temperature of 25.0°c?
Gas-filled balloon with the volume 67.0 liters at a pressure of 742 mmHg and a temperature of 25.0 °C has 2.67 moles of gas.
How do you find moles of gas in a balloon?
Gas volume and moles are related by the equation = m. where is the volume in liters, is the number of moles, is the subscript m, and molar volume is liters per mole.
How much is one mole of any gas?
The molar volume of a gas is the volume of 1 mole of gas at STP. At STP, 1 mole of any gas (6.02 × 1023 representative particles) occupies a volume of 22.4 L (figure below). 1 mole of gas occupies 22.4 L at standard temperature and pressure (0 °C, 1 atmosphere).
What is unit of gas mol?
A mole is the SI base unit of quantity of a substance. The mole is one of the basic units of SI, and the unit symbol is [mol]. The standard volume of 1 mole of ideal gas at 1 atmosphere and 0°C is 22.414 liters.
To know more about Moles visit here:
https://brainly.com/question/21323029
#SPJ1
Which one of the following will occur as diatomic molecules in elemental form? A. helium. B. argon. C. chlorine. D. phosphorus. E. sodium.
Answer:
Chlorine.
Explanation:
Diatomic Elements = Hydrogen, Nitrogen, Fluorine, Oxygen, Iodine, Chlorine, Bromine.
Easy way to remember! Have No Fear Of Ice Cold Beer!
How many moles of hydrogen atoms are in 57.8 g of C2H6O? The molar mass of C2H6O is 46.069 g/mol.
57.8 g of C2H6O contains 7.53 moles of hydrogen atoms. Avogadro's constant, or the quantity 6.022 1023, is a mathematical constant.
1 mole — what is it?6.022 X 1023 entities, such as particles, electrons, ions, molecules, etc., make up a mole, which is the volume of a substance that holds that much of the substance. In terms of protons, ions, or molecules, a mole is a unit of measurement.
> The H1 molecule weighs 1-008 qm/may.
*Molecular weight of 6 H- (6x1008) = 6-048 8m/no. of moles of coHed=weight of CHoo MW Regarding C2HeD = 57-8 gAn 46-069 304/10 = 1.254648 moles: . 1 mole GH0 will have 6:018 gm of H, which will be contained in F160's 1+25464 moles of c. (6-048x1-2544)
9m H =7.588 gm H\s:. Number of moles at 7:588 gmH, or 7:588 am
E81. = 753 moles.
To know more about mole visit:
https://brainly.com/question/26416088
#SPJ4
W
2K
Words to Know
Fill in this table as you work through the lesson. You may also use the glossary to
help you.
divide
fresh water
groundwater
reservoir
river system
runoff
the boundary that separates one
another
any water not found in
the water stored in the
a large natural or human-made
water
a river and all its
the water that flows over the
or seas
from
used to supply
surface
The completed definitions of the trema are given as follows:
divide the boundary that separates one river system from another.freshwater: any water not found in oceans or seasgroundwater: the water stored in the saturated zones beneath the land surfacereservoir: a large natural or human-made water used to supply freshwaterriver system: a river and all its streams and tributaries.runoff: water that flows over the land surfaceWhat is a river system?The patterns created by the streams, rivers, and lakes in a certain drainage basin are known as river systems. They are influenced by the geography of the land, the gradient of the land, and whether a particular region is dominated by hard or soft rocks.
Learn more about river systems at: https://brainly.com/question/23849321
#SPJ1
(a) compute the repeat unit molecular weight of polypropylene. (b) compute the number-average molecular weight for a polypropylene for which the degree of polymerization is 25000.
The repeat unit molecular weight of polypropylene is 42.08 g/mol . For polypropylene, each repeat unit has three carbons and six hydrogens.
Thus, m= 3(AC) + 6(AH)
= (3)(12.01 g/mol) + (6)(1.008 g/mol)
= 42.08 g/mol
Now computation of the number-average molecular weight.
Since the degree of polymerization (DP) is 25,000,
number-average molecular weight = (DP)m
= (25,000)(42.08 g/mol)
= 1,052,000 g/m
What is polypropylene?It is a thermoplastic polymer made from propylene units.
What is polymerization?Polymerization is the process of forming long chainlike compounds reacting monomer molecules together in a chemical reaction.
What is molecular weight?It is the sum total of weight of all the atoms present in a substance.
To know more about polymerization, visit:
https://brainly.com/question/8752840
#SPJ4
It rocks, such as the sandstone formations in Figure 1, are constantly changing as a result of weathering and erosion , then why do they appear to be stable and unchanging to us.
It rocks, such as the sandstone formations in Figure 1, are constantly changing as a result of weathering and erosion , then due to rock cycle, they appear to be stable and unchanging to us.
What is erosion?Erosion is the loss of rock and soil debris from the Earth's crust's surface, as well as the movement of the removed material by natural forces (such as wind or water).
The term "erosion" is used in its broadest sense to refer to the overall thinning and shaping of all landforms on the surface of the planet, such as the corrosion of rock in its natural position. It rocks, such as the sandstone formations in Figure 1, are constantly changing as a result of weathering and erosion , then due to rock cycle, they appear to be stable and unchanging to us.
Therefore, due to rock cycle, they appear to be stable and unchanging to us.
To learn more about erosion, here:
https://brainly.com/question/7567484
#SPJ1
how many moles per liter of nacl will you generate if 1.2g of it is dissolved in 100ml of distilled water? mw of nacl is 58.44 g/mol.
The number of the moles per liter of NaCl will we generate if the 1.2g of it is dissolved in the 100ml of the distilled water is 0.2 mol/L.
The mass of the NaCl = 1.2 g
The molar mass of the NaCl = 58.44 g/mol
The number of the moles of NaCl = mass / molar mass
The number of the moles of NaCl = 1.2 / 58.44
The number of the moles of NaCl = 0.020 mol
The volume = 100mL = 0.100 L
The molarity expression is as follows :
The molarity of the NaCl = moles / volume in L
The molarity of the NaCl = 0.020 / 0.100
The molarity of the NaCl = 0.2 mol/L
To learn more about molarity here
https://brainly.com/question/27801126
#SPJ4
A large cyclotron directs a beam of He++ nuclei onto a target with a beam current of 0. 250 mA. (a) How many He++ nuclei per second is this? (b) How long does it take for 1. 00 C to strike the target? (c) How long before 1. 00 mol of He++ nuclei strike the target?
(a) The number of He++ nuclei per second can be calculated using the formula:
number of nuclei = beam current / (charge per nucleus)
where the charge per nucleus of He++ is 1.60 x 10^-19 C.
number of nuclei = 0.250 mA / (1.60 x 10^-19 C)
number of nuclei = 1.56 x 10^17 nuclei/second
(b) The time for 1.00 C to strike the target can be calculated as:
time = 1.00 C / (beam current)
time = 1.00 C / (0.250 mA)
time = 4.00 s
(c) The time for 1.00 mol of He++ nuclei to strike the target can be calculated as:
time = 1.00 mol / (number of nuclei per second)
time = 1.00 mol / (1.56 x 10^17 nuclei/second)
time = 6.41 x 10^-18 s
Learn more about Nuclei here: https://brainly.com/question/21796566
#SPJ4
Peter just broke a thermometer and is trying to clean his mess. Explain what is the problem that Peter is creating. Explain two things that are wrong.
how many grams of so3 are produced when 20.0 g fes2 reacts with 16.0 g o2 according tothis balanced equation?
To calculate mass of SO₃ we have to know the overall reaction. Mass of SO₃ is 26.56 grams.
The reaction of [tex]FeS_2[/tex] with [tex]O_2[/tex] are:
[tex]FeS_2 +O_2[/tex] ⇒ [tex]Fe_2O_3 +SO_3[/tex]
The equivalent reactions are:
[tex]2FeS_2 + \frac{11}{2} O_2[/tex] ⇒ [tex]Fe_2O_3 +4SO_3[/tex]
Moles of 20g FeS₂ =[tex]\frac{20g}{119.98}[/tex] g/mol
Moles of 20g FeS₂ = 0.166 mole
Moles of 16g of O₂ = [tex]\frac{16g}{16}[/tex]g/mol
Moles of 16g of O₂ = 1 mole
So we can conclude that the limited reagent is FeS₂.
2 moles of FeS₂ = produce 4 moles of SO₃
0.166 moles of FeS₂ = produce [tex]\frac{4}{2} x 0.166=0.332[/tex] moles of SO₃
Then we can calculate the mass of SO₃
Mass of SO₃ = 0,332 moles x 80g/mol
Mass of SO₃= 26.56 grams
Here you can learn more about mass of atoms https://brainly.com/question/17067547
#SPJ4
Describe how the electron geometry changes if you replace a bond with a lone pair
When a bond is replaced with a lone pair, the electron geometry changes due to the repulsion between the lone pair and the other electron pairs.
The electron domain geometry is determined by the number of electron pairs in the molecule onCentral_Atom), and when a bond is replaced with a lone pair, the number of electron pairs increases. This causes the electron geometry to become more compact, with the lone pair pushing the other electron pairs closer together. The overall molecular shape may also change, depending on the arrangement of the electron pairs and the number of lone pairs.
Learn more about electron geometry at: https://brainly.com/question/7273884
#SPJ4
g which of the following is(are) correct? contains protons and electrons. rutherford created the cathode-ray tube and was the founder of the charge-to-mass ratio of an electron. an electron is heavier than a proton. the nucleus contains protons, neutrons, and electrons.
Rutherford created the cathode-ray tube , is correct answer.
A cathode-ray tube, often known as a CRT, is a vacuum tube that houses one or more electron cannons that produce electron beams that are then bent to produce images on a phosphorescent screen. The visuals could be pictures (from a television or computer monitor), electrical waveforms (from an oscilloscope), radar targets, or other occurrences. The term "picture tube" is often used to refer to a CRT on a television. Additionally, CRTs have been utilised as memory devices, in which case the screen is not meant to be seen by outsiders. When electron beams were initially discovered, before it was realised that what was released from the cathode was an electron beam, they were referred to as "cathode rays."
Johann Wilhelm Hittorf and Julius Plücker made the discovery of cathode rays. Hittorf noticed that the cathode (negative electrode) was emitting some unidentified rays that might throw shadows on the glowing tube wall, indicating that the rays were moving in a straight line. Cathode rays could be redirected by magnetic fields and electric fields, as William Crookes and Arthur Schuster both demonstrated in 1890. The first "subatomic particles," called electrons by Irish scientist George Johnstone Stoney in 1891, were negatively charged particles smaller than atoms. J. J. Thomson was able to measure the charge-mass ratio of cathode rays in 1897 and demonstrate this. The Braun tube, created by the German inventor, was the first iteration of the CRT.
Learn more about cathode-ray tube here: https://brainly.com/question/28179776
#SPJ4
what is the mass of 35 ml of deionized h2o
The mass of the 35 mL of the deionized H₂O ( water ) is 35 g.
The volume of the deionize water, H₂O = 35 mL
The density of the water, H₂O = 1 g/mL
The density formular expression is as follows :
The density = mass / volume
Where,
The density = 1 g/mL
The volume of water = 35 mL
The mass of the water = ?
By solving the values, we get :
The mass of the water H₂O = density × volume
The mass of the water H₂O = 1 g/mL × 35 mL
The mass of the water H₂O = 35 g
Thus , the mass of the water, The mass of the water H₂O is 35 g.
To learn more about mass here
https://brainly.com/question/11090150
#SPJ4
Balance the chemical equation. MnO2 +K2CO3 + KNO3 →K2MnO4 + KNO2 + CO2 Assume the coefficient of Co, is 1. What is the balanced equation? MnO2 + k_coz + OKNO3-NK, MnO4 + OKNO, + Ico,
The balanced equation is:
2MnO2 + 4K2CO3 + 2KNO3 → 2K2MnO4 + 2KNO2 + 4CO2
Balancing equation is a critical step in understanding the behavior of chemicals in a reaction. It helps in determining the correct amount of reactants and products involved in the reaction .Balancing chemical equations ensures that the law of conservation of matter is followed, which states that matter can neither be created nor destroyed. It allows for the calculation of reaction yields and the determination of theoretical maximum yields. Balancing chemical equations is necessary for predicting the reaction rate and energy changes. It is important in industrial processes to determine the optimal conditions for the reaction to occur efficiently. Balancing chemical equations helps in the design of experiments and the optimization of chemical processes .It is a crucial step in understanding the stoichiometry of a reaction and the relationship between reactants and products .Balancing chemical equations is important in environmental and health studies, as it allows for the prediction of the production and release of harmful chemicals.
learn more about balancing equation here:
https://brainly.com/question/26227625
#SPJ4
Thomas Paine, a key figure in the American revolution, once said it is only error and not truth that shrinks from inquiry. What do you think he meant by this?
Thomas Paine once said it is only error and not truth that shrinks from inquiry. He meant that the more you inquire about something, less error and mistakes come from it, and more truth will.
What do you think Thomas Paine meant by this?It means that you can not make a problem worse by inquiring about it but you can only lessen the error within it. Thomas Paine was likely referring to the idea that truth has nothing to fear from examination or investigation, whereas error does. In other words, if a belief or idea is true, it should be able to withstand scrutiny and examination. On the other hand, if a belief is based on error, it will crumble when subject to inquiry.
To know more about Thomas Paine, refer
https://brainly.com/question/939936
#SPJ1