Physics help please

Explanation:

First, we convert the energy from eV to Joules:

[tex]2.90\:\text{eV}×\left(\dfrac{1.6×10{-19}\:J}{1\:\text{eV}} \right)[/tex]

[tex]= 4.64×10^{-19}\:\text{eV}[/tex]

We know from definition that

[tex]E=h\nu = \dfrac{hc}{\lambda}[/tex]

so the wavelength of the photon is

[tex]\lambda = \dfrac{hc}{E} = 4.28×10^8\:\text{m}[/tex]

Answer:

T1 = 499.9N, T2 = 865.8N, T3 = 1000N

Explanation:

To find the tensions we need to find the vertical and horizontal components of T1 and T2

T1x = T1 cos60⁰, T1y = T1 sin60⁰

Also, T2x = T2 cos30⁰, T2y = T2 sin30⁰

For the forces to be in equilibrium,

the sum of vertical forces must be zero and the sum of horizontal forces must also be zero

Sum of Fx = 0

That is, T1x - T2x=0

NB: T2x is being subtracted because T1x and T2x are in opposite directions

T1 cos60⁰ - T2 cos30⁰ = 0

0.866T1 - 0.5T2 = 0 ............ (1)

Sum of Fy = 0

T1y + T2y - 1000 = 0

T1 sin60⁰ + T2 sin30⁰ - 1000 = 0

NB: The weight of the bag of cement is also being subtracted because it's in an opposite direction.

0.5T1 - 0.866T2 - 1000 = 0 ........(2)

From (1)

make T1 the subject

T1 = 0.5T2/0.866

Substitute T1 into (2)

0.5 (0.5T2/0.866) - 0.866T2 = 1000

(0.25/0.866)T2 - 0.866T2 = 1000

0.289T2 - 0.866T2 = 1000

1.155T2 = 1000

T2 = 865.8N

Then T1 = 0.5 x 865.8 / 0.866

T1 = 499.9N

T3 = 1000N

NB: The weight of the bag is the Tension above the rope, which is T3

Answer:

(I)

[tex] { \bf{ {v}^{2} = {u}^{2} - 2as }} \\ {v}^{2} = {0}^{2} - (2 \times 0.5 \times 5) \\ {v}^{2} = 5 \\ { \tt{final \: velocity = 2.24 \: {ms}^{ - 1} }}[/tex]

(ii)

[tex]{ \bf{v = u + at}} \\ 2.24 = 0 + (0.5t) \\ { \tt{time = 4.48 \: seconds}}[/tex]

Answer:

(d)

Explanation:

because dU = Q -W so ,that the option d(D) is correct

Let m be the mass of the second car, so the first car's mass is 2m.

Let K be the kinetic energy of the second car, so the first car's kinetic energy would be K/2.

Let u and v be the speeds of the first car and the second car, respectively. At the start,

• the first car has kinetic energy

K/2 = 1/2 (2m) u ² = mu ²   ==>   K = 2mu ²

• the second car starts with kinetic energy

K = 1/2 mv ²

It follows that

2mu ² = 1/2 mv ²

==>   4u ² = v ²

When their speeds are both increased by 2.76 m/s,

• the first car now has kinetic energy

1/2 (2m) (u + 2.76 m/s)² = m (u + 2.76 m/s)²

• the second car now has kinetic energy

1/2 m (v + 2.76 m/s)²

These two kinetic energies are equal, so

m (u + 2.76 m/s)² = 1/2 m (v + 2.76 m/s)²

==>   2 (u + 2.76 m/s)² = (v + 2.76 m/s)²

Solving the equations in bold gives u ≈ 1.95 m/s and v ≈ 3.90 m/s.

Explanation:

someone to check if the answer is correct

Explanation:

someone to check if the answer is correct

Answer:

a)  T_A = [tex]\frac{g}{d}\ ( m_2 x + m_1 \ \frac{L}{2} )[/tex] ,  b) T_B = g [m₂ ( [tex]\frac{x}{d} -1[/tex]) + m₁ ( [tex]\frac{L}{ 2d} -1[/tex]) ]

c)  x = [tex]d - \frac{m_1}{m_2} \ \frac{L}{2d}[/tex],  d)  m₂ = m₁  ( [tex]\frac{ L}{2d} -1[/tex])

Explanation:

After carefully reading your long sentence, I understand your exercise. In the attachment is a diagram of the assembly described. This is a balancing act

a) The tension of string A is requested

The expression for the rotational equilibrium taking the ends of the bar as the turning point, the counterclockwise rotations are positive

      ∑ τ = 0

      T_A d - W₂ x -W₁ L/2 = 0

      T_A = [tex]\frac{g}{d}\ ( m_2 x + m_1 \ \frac{L}{2} )[/tex]

b) the tension in string B

we write the expression of the translational equilibrium

       ∑ F = 0

       T_A - W₂ - W₁ - T_B = 0

       T_B = T_A -W₂ - W₁

       T_ B =   [tex]\frac{g}{d}\ ( m_2 x + m_1 \ \frac{L}{2} )[/tex]  - g m₂ - g m₁

       T_B = g [m₂ ( [tex]\frac{x}{d} -1[/tex]) + m₁ ( [tex]\frac{L}{ 2d} -1[/tex]) ]

c) The minimum value of x for the system to remain stable, we use the expression for the endowment equilibrium, for this case the axis of rotation is the support point of the chord A, for which we will write the equation for this system

         T_A 0 + W₂ (d-x) - W₁ (L / 2-d) - T_B d = 0

at the point that begins to rotate T_B = 0

          g m₂ (d -x) -  g m₁  (0.5 L -d) + 0 = 0

          m₂ (d-x) = m₁ (0.5 L- d)

          m₂ x = m₂ d - m₁ (0.5 L- d)

          x = [tex]d - \frac{m_1}{m_2} \ \frac{L}{2d}[/tex]

d) The mass of the block for which it is always in equilibrium

this is the mass for which x = 0

           0 = d - \frac{m_1}{m_2} \  \frac{L}{2d}

         [tex]\frac{m_1}{m_2} \ (0.5L -d) = d[/tex]

          [tex]\frac{m_1}{m_2} = \frac{ d}{0.5L-d}[/tex]

          m₂ = m₁  [tex]\frac{0.5 L -d}{d}[/tex]

          m₂ = m₁  ( [tex]\frac{ L}{2d} -1[/tex])

Answer:

Force acting on a body of mass 7 kg which produces an accceleration of 10 m/s2 is 70 N

Answer:

10 m/s2 or 70 newtons.

Explanation:

............................

............

Answer:

20 km/hr

Explanation:

Distance = 10km

Time = 30 minutes = 1/2 hour

Average Speed = Total distance / Total Time Taken

                           = 10 ÷  1/2

                           = 10 x 2

                           = 20 km/hr

Average speed = (distance covered) / (time to cover the distance)

Average speed = (10 km) / (30 minutes)

Average speed =  1/3 km/min

Most people would probably want to see it in a more convenient, more familiar unit, such as km/hour or m/second.

(10 km / 30 min) x (60 min / hour) = (10 x 60 / 30) (km-min / min-hour)

Average speed = 20 km/hour

AvgSpd = (10 km / 30 min) x (1,000 m / km) x (min / 60 sec)

AvgSpd = (10x1,000 / 30x60) (km-m-min / min-km-sec)

Averge Speed =  5.56 m/s

Answer:

Gravity between you and the sun

Answer:

[tex]M_b=6kg[/tex]

Explanation:

From the question we are told that:

Coefficient of restitution [tex]\mu=1.00[/tex]

Mass A [tex]M_a=6kg[/tex]

Initial Velocity of A [tex]U_a=6m/s[/tex]

Initial Velocity of B [tex]U_b=0m/s[/tex]

Generally the equation for Coefficient of restitution is mathematically given by

 [tex]\mu=\frac{V_b-V_a}{U_a-U_b}[/tex]

 [tex]1=\frac{v_B}{6}[/tex]

 [tex]V_b=6*1[/tex]

 [tex]V_b=6m/s[/tex]

Generally the equation for conservation of linear momentum  is mathematically given by

 [tex]M_aU_a+M_bU_b=M_aV_a+M_bV_b[/tex]

 [tex]6*6+=M_b*6[/tex]

 [tex]M_b=6kg[/tex]

Answer:

A - 5

B - 1

C - 4

D -2

Explanation:

I don't have one i just know...

The fire blanket is a tightly woven fabric. The spill containment kit consists of absorbent material. Fire extinguishers control small fires and the safety data sheet provides chemical, health, and safety information.

(a) The fire blanket is a blanket, which may be quickly thrown over a fire to snuff out the flames, and comprises fire-resistant materials.

Hence, option (a) matches with option (5)

(b) In order to contain a chemical spill, absorbent items like pads, socks, or booms are frequently included in spill containment kits.

Hence, option (b) correctly matches with option (1).

(c) A fire extinguisher is a tool used to put out small fires during emergencies.

Hence, option (c) correctly matches with option (4).

(d) A Safety Data Sheet (SDS) gives in-depth details regarding a specific chemical or chemical mixture. It provides information about the physical characteristics of the chemical, any potential risks, safe handling and storage practices, emergency response strategies, and more.

Hence, option (d) correctly matches option (2).

To learn more about Fire extinguishers, here:

https://brainly.com/question/3905469

#SPJ6

The question is incomplete. The complete question is :

A high-speed bullet train accelerates and decelerates at the rate of 4 ft/s^2. Its maximum cruising speed is 90 mi/h. What is the maximum distance the train can travel if it accelerates from rest until it reaches its cruising speed and then runs at that speed for 15 minutes?

Solution :

Given :

Speed of the bullet train, v = 90 mi/h

                                            = [tex]$90 \times \frac{5280}{3600}$[/tex]

                                            = 132 ft/s

Time = 15 minutes

        = 15 x 60

        = 900 s

Acceleration from rest,

[tex]$a(t) = 4 \ ft/s^2$[/tex]

[tex]$v(t) = 4t + C$[/tex]

Since, v(0) = 0, then C = 0, so velocity is

v(t) = 4t ft/s

Then find the position function,

[tex]$s(t) = \frac{4}{2}t^2 + C$[/tex]

      [tex]$=2t^2+C$[/tex]

It is at position 0 when t = 0, so C = 0, and the final position function for only the time it is accelerating is :

[tex]$s(t) = 2t^2$[/tex]

Time to get maximum cruising speed is :

4t = 132

t = 33 s

Distance travelled (at cruising speed) by speed to get the remaining distance travelled.

[tex]$900 \ s \times 132 \ \frac{ft}{s} = 118800 \ ft$[/tex]

Total distance travelled, converting back to miles,

[tex]$2178 + 118800 = 120978\ ft . \ \frac{mi}{5280 \ ft}$[/tex]

                      = 22.9125 mi

Therefore, the distance travelled is 22.9125 miles

Answer:

Option C. 0.73 g/cm³

Explanation:

From the question given above, the following data were obtained:

Mass = 80 g

Area (A) = 10000 cm²

Thickness = 0.11 mm

Density =?

Next, we shall convert 0.11 mm to cm. This can be obtained as follow:

10 mm = 1 cm

Therefore,

0.11 mm = 0.11 mm × 1 cm / 10 mm

0.11 mm = 0.011 cm

Thus, 0.11 mm is equivalent to 0.011 cm.

Next, we shall determine the volume of the paper. This can be obtained as follow:

Area (A) = 10000 cm²

Thickness = 0.011 cm

Volume =?

Volume = Area × Thickness

Volume = 10000 × 0.011

Volume = 110 cm³

Finally, we shall determine the density of the paper. This can be obtained as follow:

Mass = 80 g

Volume = 110 cm³

Density =?

Density = mass / volume

Density = 80 / 110

Density = 0.73 g/cm³

Therefore the density of the paper is 0.73 g/cm³

"down/up the plane" suggests an inclined plane, but no angle is given so I'll call it θ for the time being.

The free body diagram for the crate in either scenario is the same, except for the direction in which static friction is exerted on the crate. With the P = 100 N force holding up the crate, static friction points up the incline and keeps the crate from sliding downward. When P = 350 N, the crate is pushed upward, so static friction points down. (see attached FBDs)

Using Newton's second law, we set up the following equations.

• p = 100 N

∑ F (parallel) = f + p cos(θ) - mg sin(θ) = 0

∑ F (perpendicular) = n - p sin(θ) - mg cos(θ) = 0

• P = 350 N

∑ F (parallel) = P cos(θ) - F - mg sin(θ) = 0

∑ F (perpendicular) = N - P sin(θ) - mg cos(θ) = 0

(where n and N are the magnitudes of the normal force in the respective scenarios; ditto for f and F which denote static friction, so that f = µn and F = µN, with µ = coefficient of static friction)

Solve for n and N :

n = p sin(θ) + mg cos(θ)

N = P sin(θ) - mg cos(θ)

Substitute these into the corresponding equations containing µ, and solve for µ :

µ = (mg sin(θ) - p cos(θ)) / (mg cos(θ) + p sin(θ))

µ = (P cos(θ) - mg sin(θ)) / (P sin(θ) + mg cos(θ))

Next, you would set these equal and solve for m :

(mg sin(θ) - p cos(θ)) / (mg cos(θ) + p sin(θ)) = (P cos(θ) - mg sin(θ)) / (P sin(θ) + mg cos(θ))

...

Once you find m, you back-substitute and solve for µ, but as you might expect the result will be pretty complicated. If you take a simple angle like θ = 30°, you would end up with

m ≈ 36.5 kg

µ ≈ 0.256

The coefficient of static friction between the plane and the crate is μ = 0.256 and the mass of the crate is m=36.4 kg.

From the given,

The force that opposes the crate by sliding is P = 100N

In X-axis, the sum of forces is zero.

ΣF = 0

Pcosθ - mgsinθ-Ff = 0

Ff = Pcosθ - mgsinθ

In Y-axis

Psinθ - mgcosθ - N = 0

N = Psinθ-mgcosθ

Frictional force, Ff = μN, μ is the coefficient of friction

Ff = μN

Pcos30- mgsin30 + μ( Psin30+mgcos30) = 0

μ = mgsin30-Pcos30/Psin30+mgcos30 ------1

The block is sliding with the horizontal force, F = 350N

X-axis

P₂cosθ - mgsinθ-Ff = 0

Y-axis

P₂sinθ - mgcosθ - N = 0

N = P₂sinθ-mgcosθ

μ = P₂cos30-mgsin30/P₂sin30-mgcos30   -----2

Equate equations 1 and 2

mgsin30-Pcos30/Psin30+mgcos30 =P₂cos30-mgsin30/P₂sin30-mgcos30

4.905m-86.6/50+8.49 = 303.1-4.905m/175+8.49

41.7m² + 123m - 1.516×10⁴ = 0

-41.7m² +2330m -1.516×10⁴(4.905-86.6)(175+8.49) =(303.1-4.905)(50+8.49)

83.4m² - 2207m -3.03×10⁴ = 0

m= 36.4 kg

Hence, the mass of the crate is 36.4 Kg.

Substitute the value of m in equation 1,

μ = 4.905(36.4) - 86.6 / 50 + 8.49

μ  = 0.256

Thus, the coefficient of static friction is 0.256.

To learn more about friction and its types:

https://brainly.com/question/30886698

#SPJ1

Answer:

  K_b = 78 J

Explanation:

For this exercise we can use the conservation of energy relations

starting point. Lowest of the trajectory

        Em₀ = K = ½ mv²

final point. When it is at tea = 50º

        Em_f = K + U

        Em_f = ½ m v_b² + m g h

where h is the height from the lowest point

        h = L - L cos 50

        Em_f = ½ m v_b² + mg L (1 - cos50)

energy be conserve

        Em₀ = Em_f

         ½ mv² = ½ m v_b² + mg L (1 - cos50)

         K_b = ½ m v_b² + mg L (1 - cos50)

let's calculate

          K_b = ½ 2.0 6.0² + 2.0 9.8 6.0 (1 - cos50)

          K_b = 36 +42.0

          K_b = 78 J

Answer:

a)   p = 95.66 cm, b) p = 93.13 cm

Explanation:

For this problem we use the  constructor equation

         [tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]

where f is the focal length, p and q are the distances to the object and the image, respectively

the power of the lens is

         P = 1 / f

         f = 1 / P

         f = 1 / 2.25

         f = 0.4444 m

the distance to the object is

         [tex]\frac{1}{p} = \frac{1}{f} -\frac{1}{q}[/tex]

the distance to the image is

          q = 85 -2

           q = 83 cm

we must have all the magnitudes in the same units

           f = 0.4444 m = 44.44 cm

we calculate

           [tex]\frac{1}{p} = \frac{1}{44.44} - \frac{1}{83}[/tex]

           1 / p = 0.010454

            p = 95.66 cm

b) if they were contact lenses

            q = 85 cm

            [tex]\frac{1}{p} = \frac{1}{44.44} - \frac{1}{85}[/tex]

             1 / p = 0.107375

             p = 93.13 cm

Answer:

Graph B express the magnetic relationship of magnetic flux and electronic flow

Answer:

Time

Explanation:

The answer to the question is actually time. Time is not needed when you calculate the mass or volume of an object, a square, sphere, rectangle, or any other 3D shape. You must also calculate the length to know what numbers you will be multiplying by. The answer to the question is time.

Answer:

True

Explanation:

A magnetohydrodynamic drive or MHD accelerator is a method which is used for propelling the vehicles using only by applying the electric and magnetic fields. It has no moving parts. It accelerates an electrically conductive propellant (liquid or gas) with magnetohydrodynamics.

Its working principle is same as an electric motor except that in an MHD drive, the moving rotor is replaced by the fluid acting directly as the propellant.

An MHD accelerator is reversible.

So,  the statement is true.

Answer:

m = 0.057 kg = 57 g

Explanation:

Energy Added to Water = Heat added to raise the temperature of water + Heat used to vaporize water

[tex]E = mC\Delta T + mH\\E = m(C\Delta T + H)[/tex]

where,

E = Energy added to water = 145 KJ

m = mass of water = ?

C = specific heat capacity of water = 4.2 KJ/kg.°C

ΔT = change in temperature = 100°C - 35°C = 65°C

H = Latent heat of vaporization of water = 2260 KJ/kg

Therefore,

[tex]145\ KJ = m[(4.2\ KJ/kg.^oC)(65^oC)+2260\ KJ/kg]\\\\145\ KJ = m(2533\ KJ/kg)\\\\m = \frac{145\ KJ}{2533\ KJ/kg}[/tex]

m = 0.057 kg = 57 g

The mass of water that can be heated is equal to 0.527 kilograms.

Given the following data:

Scientific data:

To calculate the mass of water that can be heated:

Note: The quantity of energy added to water is equal to the quantity of heat used to vaporize water and the quantity of heat that is added to raise the temperature of water.

Mathematically, this is given by this expression:

[tex]E=mc\theta + mH\\\\E= m(c\theta + H)[/tex]

Making m the subject of formula, we have:

[tex]m=\frac{E}{c\theta + H}[/tex]

Substituting the parameters into the formula, we have;

[tex]m=\frac{145000}{[42000\times (100-35)] + 2260}\\\\m=\frac{145000}{(4200\times 65) + 2260}\\\\m=\frac{145000}{273000 + 2260}\\\\m=\frac{145000}{275260}[/tex]

Mass, m = 0.527 kilograms.

Read more on quantity of energy here: https://brainly.com/question/13439286

Answer:

a) if we assume that the water does not spill, Beaker B weighs more than beaker S, or which in this case Beaker A weighs more

b) If it is spilled in water the weight of the two beakers is the same

Explanation:

The beaker weight is

 beaker A

          W_total = W_ empty + W_water

Beaker B

            W_total = W_ empty + W_water + W_roca

a) if we assume that the water does not spill, Beaker B weighs more than beaker S, or which in this case Beaker A weighs more

b) If it is spilled in water, the weight of the two beakers is the same because the amount of liquid spilled and equal to the weight of the stone, therefore the two beakers weigh the same

Answer:

Reflective

Explanation:

The radiation pressure of the wave that totally absorbed is given by;

[tex]P_{abs}= \frac{I}{C}[/tex]

and While the radiation pressure of the wave totally reflected is given by;

[tex]P_{ref}= \frac{2I}{C}[/tex]

Now compare the two-equation you can clearly see that the pressure due to reflection is larger than absorption therefore the sail should be reflective.

Explanation:

Let x = distance of [tex]F_1[/tex] from the fulcrum and let's assume that the counterclockwise direction is positive. In order to attain equilibrium, the net torque [tex]\tau_{net}[/tex] about the fulcrum is zero:

[tex]\tau_{net} = -F_1x + F_2d_2 = 0[/tex]

[tex] -m_1gx + m_2gd_2 = 0[/tex]

[tex]m_1x = m_2d_2[/tex]

Solving for x,

[tex]x = \dfrac{m_2}{m_1}d_2[/tex]

[tex]\:\:\:\:=\left(\dfrac{105.7\:\text{g}}{65.7\:\text{g}} \right)(13.8\:\text{cm}) = 22.2\:\text{cm}[/tex]

5 9 . 4

- 3 7 . 2

2 2 . 2

Explanation:

Use the algorithm method.

5 9 . 4

- 3 7 . 2

2 2 . 2

2 Therefore, 59.4-37.2=22.259.4−37.2=22.2.

22.2

22.2

Answer:

[tex]R1/R2=\frac{2}{3}[/tex]

Explanation:

From the question we are told that:

1st's Length [tex]l=L[/tex]

1st's radius [tex]r=r[/tex]

2nd's Length [tex]l=6L[/tex]

2nd's radius [tex]r=2r[/tex]

Generally the equation for Resistance R is mathematically given by

 [tex]R=\frac{\rho L}{\pi r^2}[/tex]

Therefore

 [tex]R_1=\frac{\rho L}{\pi r^2}[/tex]

And

 [tex]R_2=\frac{\rho 6L}{\pi (2r)^2}[/tex]

Therefore

 [tex]R1/R2=\frac{\frac{\rho L}{\pi r^2}}{\frac{\rho 6L}{\pi (2r)^2}}[/tex]

 [tex]R1/R2=\frac{2}{3}[/tex]

Answer:

A. (b)

B. (a)

Explanation:

The electric dipole moment is the product of charge and the length of the dipole.

The torque on the dipole placed in the external electric field is given by

torque = p E sin A

where, p is the electric dipole moment, E is the electric field, A is the angle between the field and dipole moment.

When the dipole moment is parallel to the electric field, the net torque is zero and it is said to be in stable equilibrium.

When the dipole moment is anti parallel to the electric field, the net torque is zero but the dipole is in unstable equilibrium.

So, the option (b) is correct.

Teh energy is given by

U = - p  E cos A

When the angle A is zero , the potential energy is negative and it is minimum.

In this exercise we have to use the knowledge about dipole to be able to mark the correct alternative for each question, in this way we find that:

A) Letter b

B) Letter a

So knowing that the electric dipole moment is the product of charge and the length of the dipole and the torque on the dipole placed in the external electric field is given by:

[tex]torque = p E sin (A)[/tex]

where:

When the dipole moment is parallel to the electric field, the net torque is zero and it is said to be in stable equilibrium. When the dipole moment is anti parallel to the electric field, the net torque is zero but the dipole is in unstable equilibrium.

Now the energy is given by:

[tex]U = - p E cos (A)[/tex]

We can say that when the angle A is zero , the potential energy is negative and it is minimum.

See more about dipole at brainly.com/question/12757739